...and into the core setup/teardown code in fs/ext4/super.c so that
other parts of ext4 can define tuning parameters.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

This is a port of a patch from Linus which fixes a 200+ byte stack
usage problem in ext4_get_parent().

It's more efficient to pass down only the actual parts of the dentry
that matter: the parent inode and the name, instead of allocating a
struct dentry on the stack.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

This fixes some very common warnings reported by kerneloops.org
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

lg_prealloc_list seems to cry out for a per-cpu data structure; on a large
smp system I think this should be better.  I've lightly tested this change
on a 4-cpu system.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Acked-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Pick an ioctl number for EXT4_IOC_MIGRATE that won't conflict with
other ext4 ioctl's.  Since there haven't been any major userspace
users of this ioctl, we can afford to change this now, to avoid
potential problems later.

Also, reorder the ioctl numbers in ext4.h to avoid this sort of
mistake in the future.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

This patch hooks the ext3 to ext4 migrate interface to
EXT4_IOC_SETFLAGS ioctl. The userspace interface is via chattr +e.  We
only allow setting extent flags.  Clearing extent flag (migrating from
ext4 to ext3) is not supported.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

The migrate ioctl writes to the filsystem, so we need to elevate the
write count.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

If there group descriptors are corrupted we need unlock the block
group lock before returning from the function; else we will oops when
freeing a spinlock which is still being held.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Calculate the journal device name once and stash it away in the
journal_s structure.  This avoids needing to call bdevname()
everywhere and reduces stack usage by not needing to allocate an
on-stack buffer.  In addition, we eliminate the '/' that can appear in
device names (e.g. "cciss/c0d0p9" --- see kernel bugzilla #11321) that
can cause problems when creating proc directory names, and include the
inode number to support ocfs2 which creates multiple journals with
different inode numbers.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

ext4 creates per-suberblock directory in /proc/ext4/ . Name used as
basis is taken from bdevname, which, surprise, can contain slash.

However, proc while allowing to use proc_create("a/b", parent) form of
PDE creation, assumes that parent/a was already created.

bdevname in question is 'cciss/c0d0p9', directory is not created and all
this stuff goes directly into /proc (which is real bug).

Warning comes when _second_ partition is mounted.

http://bugzilla.kernel.org/show_bug.cgi?id=11321Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

This fixes a bug which prevented the newly created inodes after a
resize from being used on filesystems with flex_bg.
Signed-off-by: NFrederic Bohe <frederic.bohe@bull.net>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Note: some people thinks this represents a security bug, since it
might make the system go away while it is printing a large number of
console messages, especially if a serial console is involved.  Hence,
it has been assigned CVE-2008-3528, but it requires that the attacker
either has physical access to your machine to insert a USB disk with a
corrupted filesystem image (at which point why not just hit the power
button), or is otherwise able to convince the system administrator to
mount an arbitrary filesystem image (at which point why not just
include a setuid shell or world-writable hard disk device file or some
such).  Me, I think they're just being silly. --tytso
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Cc: linux-ext4@vger.kernel.org
Cc: Eugene Teo <eugeneteo@kernel.sg>

With delayed allocation we use i_data_sem to update i_disksize.  We need
to update i_disksize only if the new size specified is greater than the
current value and we need to make sure we don't race with other
i_disksize update.  With delayed allocation we will switch to the
write_begin function for non-delayed allocation if we are low on free
blocks.  This means the write_begin function for non-delayed allocation
also needs to use the same locking.

We also need to check and update i_disksize even if the new size is less
that inode.i_size because of delayed allocation.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

For blocksize < pagesize we need to remove blocks that got allocated in
block_write_begin() if we fail with ENOSPC for later blocks.
block_write_begin() internally does this if it allocated pages locally.
This makes sure we don't have blocks outside inode.i_size during ENOSPC.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

When we truncate files, the meta-data blocks released are not reused
untill we commit the truncate transaction.  That means delayed get_block
request will return ENOSPC even if we have free blocks left.  Force a
journal commit and retry block allocation if we get ENOSPC with free
blocks left.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMingming Cao <cmm@us.ibm.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

    
Make sure we don't add the inode to the journal handle until after the
block allocation, so that a journal commit will not include the inode in
case of block allocation failure.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMingming Cao <cmm@us.ibm.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

We run into ENOSPC error on nonmballoc ext4, even when there is free blocks
on the filesystem.

The patch includes two changes:

a) Set reservation to NULL if we trying to allocate near group_target_block
from the goal group if the free block in the group is less than windows.
This should give us a better chance to allocate near group_target_block.
This also ensures that if we are not allocating near group_target_block
then we don't trun off reservation. This should enable us to allocate
with reservation from other groups that have large free blocks count.

b) we don't need to check the window size if the block reservation is off.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMingming Cao <cmm@us.ibm.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

This patch converts some usage of ext4_fsblk_t to s64.  This is needed
so that some of the sign conversion works as expected in if loops.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMingming Cao <cmm@us.ibm.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

The delayed allocation code allocates blocks during writepages(), which
can not handle block allocation failures.  To deal with this, we switch
away from delayed allocation mode when we are running low on free
blocks.  This also allows us to avoid needing to reserve a large number
of meta-data blocks in case all of the requested blocks are
discontiguous.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMingming Cao <cmm@us.ibm.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

This patch adds dirty block accounting using percpu_counters.  Delayed
allocation block reservation is now done by updating dirty block
counter.  In a later patch we switch to non delalloc mode if the
filesystem free blocks is greater than 150% of total filesystem dirty
blocks
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao<cmm@us.ibm.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

During block reservation if we don't have enough blocks left, retry
block reservation with smaller block counts.  This makes sure we try
fallocate and DIO with smaller request size and don't fail early.  The
delayed allocation reservation cannot try with smaller block count. So
retry block reservation to handle temporary disk full conditions.  Also
print free blocks details if we fail block allocation during writepages.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMingming Cao <cmm@us.ibm.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

With delayed allocation we need to make sure block are reserved before
we attempt to allocate them. Otherwise we get block allocation failure
(ENOSPC) during writepages which cannot be handled. This would mean
silent data loss (We do a printk stating data will be lost). This patch
updates the DIO and fallocate code path to do block reservation before
block allocation. This is needed to make sure parallel DIO and fallocate
request doesn't take block out of delayed reserve space.

When free blocks count go below a threshold we switch to a slow patch
which looks at other CPU's accumulated percpu counter values.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

We are a bit agressive in invalidating all the pages. But
it is ok because we really don't know why the block allocation
failed and it is better to come of the writeback path
so that user can look for more info.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>

Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

percpu_counter_sum_and_set() and percpu_counter_sum() is the same except
the former updates the global counter after accounting.  Since we are
taking the fbc->lock to calculate the precise value of the counter in
percpu_counter_sum() anyway, it should simply set fbc->count too, as the
percpu_counter_sum_and_set() does.

This patch merges these two interfaces into one.
Signed-off-by: NMingming Cao <cmm@us.ibm.com>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

This is debatable, but while we're debating it, let's disallow the
combination of splice and an O_APPEND destination.

It's not entirely clear what the semantics of O_APPEND should be, and
POSIX apparently expects pwrite() to ignore O_APPEND, for example.  So
we could make up any semantics we want, including the old ones.

But Miklos convinced me that we should at least give it some thought,
and that accepting writes at arbitrary offsets is wrong at least for
IS_APPEND() files (which always have O_APPEND set, even if the reverse
isn't true: you can obviously have O_APPEND set on a regular file).

So disallow O_APPEND entirely for now.  I doubt anybody cares, and this
way we have one less gray area to worry about.
Reported-and-argued-for-by: NMiklos Szeredi <miklos@szeredi.hu>
Acked-by: NJens Axboe <ens.axboe@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
  hwmon: (abituguru3) Enable DMI probing feature on Abit AT8 32X
  hwmon: (abituguru3) Enable reading from AUX3 fan on Abit AT8 32X
  hwmon: (adt7473) Fix some bogosity in documentation file
  hwmon: Define sysfs interface for energy consumption register
  hwmon: (it87) Prevent power-off on Shuttle SN68PT
  eeepc-laptop: Fix hwmon interface

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] correct broken links and email addresses

This fixes the previous fix, which was completely wrong on closer
inspection. This version has been manually tested with a user-space
test harness and generates sane values. A nearly identical patch has
been boot-tested.

The problem arose from changing how kmalloc/kfree handled alignment
padding without updating ksize to match. This brings it in sync.
Signed-off-by: NMatt Mackall <mpm@selenic.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Replace the no longer working links and email address in the
documentation and in source code.
Signed-off-by: NMárton Németh <nm127@freemail.hu>
Signed-off-by: NDave Jones <davej@redhat.com>

Enable driver checking of the DMI product name (when enabled) on
an Abit AT8 32X, instead of falling back to a manual probe. This
eliminates false negatives and eventually will help avoid
unnecessary bus probes on unsupported mainboards.
Signed-off-by: NAlistair John Strachan <alistair@devzero.co.uk>
Tested-by: NDaniel Exner <dex@dragonslave.de>
Acked-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

The table for the Abit AT8 32X was incorrectly missing an entry
for the sixth ("AUX3") fan. Add this entry, exporting the fan
reading to userspace.

Closes lm-sensors.org ticket #2339.
Signed-off-by: NAlistair John Strachan <alistair@devzero.co.uk>
Tested-by: NDaniel Exner <dex@dragonslave.de>
Acked-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Describe the sysfs files that were introduced in the ibmaem driver.
Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

On the Shuttle SN68PT, FAN_CTL2 is apparently not connected to a fan,
but to something else. One user has reported instant system power-off
when changing the PWM2 duty cycle, so we disable it.

I use the board name string as the trigger in case the same board is
ever used in other systems.

This closes lm-sensors ticket #2349:
pwmconfig causes a hard poweroff
http://www.lm-sensors.org/ticket/2349Signed-off-by: NJean Delvare <khali@linux-fr.org>

Creates a name file in the sysfs directory, that
is needed for the libsensors library to work.
Also rename fan1_pwm to pwm1 and scale its value as needed.

This fixes bug #11520:
http://bugzilla.kernel.org/show_bug.cgi?id=11520Signed-off-by: NCorentin Chary <corentincj@iksaif.net>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Sibyte: Register PIO PATA device only for Swarm and Litte Sur