In sync-page path, if spte.writable is changed, it will lose page dirty
tracking, for example:

assume spte.writable = 0 in a unsync-page, when it's synced, it map spte
to writable(that is spte.writable = 1), later guest write spte.gfn, it means
spte.gfn is dirty, then guest changed this mapping to read-only, after it's
synced,  spte.writable = 0

So, when host release the spte, it detect spte.writable = 0 and not mark page
dirty
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

In current code, if ept is enabled(shadow_accessed_mask = 0), the page
accessed tracking is lost.
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

In the speculative path, we should check guest pte's reserved bits just as
the real processor does
Reported-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

The index wasn't calculated correctly (off by one) for huge spte so KVM guest
was unstable with transparent hugepages.
Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com>
Reviewed-by: NReviewed-by: Rik van Riel <riel@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

If the destination is a memory operand and the memory cannot
map to a valid page, the xchg instruction emulation and locked
instruction will not work on io regions and stuck in endless
loop. We should emulate exchange as write to fix it.
Signed-off-by: NWei Yongjun <yjwei@cn.fujitsu.com>
Acked-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

If pit delivers interrupt while pic is masking it OS will never do EOI
and ack notifier will not be called so when pit will be unmasked no pit
interrupts will be delivered any more. Calling mask notifiers solves this
issue.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

With tdp enabled we should get into emulator only when emulating io, so
reexecution will always bring us back into emulator.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Mark inc (0xfe/0 0xff/0) and dec (0xfe/1 0xff/1) as lock prefix capable.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

'level' and 'sptep' are aliases for 'interator.level' and 'iterator.sptep', no
need for them.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Currently, when we fetch an spte, we only verify that gptes match those that
the walker saw if we build new shadow pages for them.

However, this misses the following race:

  vcpu1            vcpu2

  walk
                  change gpte
                  walk
                  instantiate sp

  fetch existing sp

Fix by validating every gpte, regardless of whether it is used for building
a new sp or not.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Partition the function into three sections:

- fetching indirect shadow pages (host_level > guest_level)
- fetching direct shadow pages (page_level < host_level <= guest_level)
- the final spte (page_level == host_level)

Instead of the current spaghetti.

A slight change from the original code is that we call validate_direct_spte()
more often: previously we called it only for gw->level, now we also call it for
lower levels.  The change should have no effect.

[xiao: fix regression caused by validate_direct_spte() called too late]
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Move the code to check whether a gpte has changed since we fetched it into
a helper.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Add a helper to verify that a direct shadow page is valid wrt the required
access permissions; drop the page if it is not valid.
Reviewed-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

To clarify spte fetching code, move large spte handling into a helper.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

To avoid split accesses to 64 bit sptes on i386, use __set_spte() to link
shadow pages together.

(not technically required since shadow pages are __GFP_KERNEL, so upper 32
bits are always clear)
Reviewed-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

To simplify the process of fetching an spte, add a helper that links
a shadow page to an spte.
Reviewed-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Devices register mask notifier using gsi, but irqchip knows about
irqchip/pin, so conversion from irqchip/pin to gsi should be done before
looking for mask notifier to call.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Userspace needs to reset and save/restore these MSRs.

The MCE banks are not exposed since their number varies from vcpu to vcpu.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Fix:
general protection fault: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
......
Call Trace:
 [<ffffffffa0159bd1>] ? kvm_set_irq+0xdd/0x24b [kvm]
 [<ffffffff8106ea8b>] ? trace_hardirqs_off_caller+0x1f/0x10e
 [<ffffffff813ad17f>] ? sub_preempt_count+0xe/0xb6
 [<ffffffff8106d273>] ? put_lock_stats+0xe/0x27
...
RIP  [<ffffffffa0159c72>] kvm_set_irq+0x17e/0x24b [kvm]

This bug is triggered when guest is shutdown, is because we freed
irq_routing before pit thread stopped
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

When shadow pages are in use sometimes KVM try to emulate an instruction
when it accesses a shadowed page. If emulation fails KVM un-shadows the
page and reenter guest to allow vcpu to execute the instruction. If page
is not in shadow page hash KVM assumes that this was attempt to do MMIO
and reports emulation failure to userspace since there is no way to fix
the situation. This logic has a race though. If two vcpus tries to write
to the same shadowed page simultaneously both will enter emulator, but
only one of them will find the page in shadow page hash since the one who
founds it also removes it from there, so another cpu will report failure
to userspace and will abort the guest.

Fix this by checking (in addition to checking shadowed page hash) that
page that caused the emulation belongs to valid memory slot. If it is
then reenter the guest to allow vcpu to reexecute the instruction.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Currently if guest access address that belongs to memory slot but is not
backed up by page or page is read only KVM treats it like MMIO access.
Remove that capability. It was never part of the interface and should
not be relied upon.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

They are not used outside of the file.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Stanse found that there is an omitted unlock in kvm_create_pit in one fail
path. Add proper unlock there.
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: Gleb Natapov <gleb@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Gregory Haskins <ghaskins@novell.com>
Cc: kvm@vger.kernel.org
Signed-off-by: NAvi Kivity <avi@redhat.com>

Real hardware disregards permission errors when computing page fault error
code bit 0 (page present).  Do the same.
Reviewed-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Bit 4 of the page fault error code is set only if EFER.NX is set.
Reviewed-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This patch change to use DstAcc for decoding 'mov AL, moffs'
and introduced SrcAcc for decoding 'mov moffs, AL'.
Signed-off-by: NWei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

If IOPL check fail, the cli/sti emulate GP and then we should
skip writeback since the default write OP is OP_REG.
Signed-off-by: NWei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

The source operand of 'mov rm,sreg' is segment register, not
general-purpose register, so remove SrcReg from decoding.
Signed-off-by: NWei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

'and AL,imm8' should be mask as ByteOp, otherwise the dest operand
length will no correct and we may fill the full EAX when writeback.
Signed-off-by: NWei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Fix the comment of out instruction, using the same style as the
other instructions.
Signed-off-by: NWei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Memory reads for 'mov sreg,rm16' should be 16 bits only.
Signed-off-by: NWei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

__set_spte() will happily replace an spte with the accessed bit set with
one that has the accessed bit clear.  Add a helper update_spte() which checks
for this condition and updates the page flag if needed.
Signed-off-by: NAvi Kivity <avi@redhat.com>

Currently, in the window between the check for the accessed bit, and actually
dropping the spte, a vcpu can access the page through the spte and set the bit,
which will be ignored by the mmu.

Fix by using an exchange operation to atmoically fetch the spte and drop it.
Signed-off-by: NAvi Kivity <avi@redhat.com>

Since we need to make the check atomic, move it to the place that will
set the new spte.
Signed-off-by: NAvi Kivity <avi@redhat.com>

When we call rmap_remove(), we (almost) always immediately follow it by
an __set_spte() to a nonpresent pte.  Since we need to perform the two
operations atomically, to avoid losing the dirty and accessed bits, introduce
a helper drop_spte() and convert all call sites.

The operation is still nonatomic at this point.
Signed-off-by: NAvi Kivity <avi@redhat.com>

Commit 341d9b535b6c simplify reload logic while entry guest mode, it
can avoid unnecessary sync-root if KVM_REQ_MMU_RELOAD and
KVM_REQ_MMU_SYNC both set.

But, it cause a issue that when we handle 'KVM_REQ_TLB_FLUSH', the
root is invalid, it is triggered during my test:

Kernel BUG at ffffffffa00212b8 [verbose debug info unavailable]
......

Fixed by directly return if the root is not ready.
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

For 32bit machines where the physical address width is
larger than the virtual address width the frame number types
in KVM may overflow. Fix this by changing them to u64.

[sfr: fix build on 32-bit ppc]
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

This patch converts unnecessary divide and modulo operations
in the KVM large page related code into logical operations.
This allows to convert gfn_t to u64 while not breaking 32
bit builds.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>