Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [IRDA] IRNET: Fix build when TCGETS2 is defined.
  [NET]: docbook fixes for netif_ functions
  [NET]: Hide the net_ns kmem cache
  [NET]: Mark the setup_net as __net_init
  [NET]: Hide the dead code in the net_namespace.c
  [NET]: Relax the reference counting of init_net_ns
  [NETNS]: Make the init/exit hooks checks outside the loop
  [NET]: Forget the zero_it argument of sk_alloc()
  [NET]: Remove bogus zero_it argument from sk_alloc
  [NET]: Make the sk_clone() lighter
  [NET]: Move some core sock setup into sk_prot_alloc
  [NET]: Auto-zero the allocated sock object
  [NET]: Cleanup the allocation/freeing of the sock object
  [NET]: Move the get_net() from sock_copy()
  [NET]: Move the sock_copy() from the header
  [TCP]: Another TAGBITS -> SACKED_ACKED|LOST conversion
  [TCP]: Process DSACKs that reside within a SACK block

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Documentation updates for network interfaces.

1. Add doc for netif_napi_add
2. Remove doc for unused returns from netif_rx
3. Add doc for netif_receive_skb

[ Incorporated minor mods from Randy Dunlap -DaveM ]
Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This cache is only required to create new namespaces,
but we won't have them in CONFIG_NET_NS=n case.

Hide it under the appropriate ifdef.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The setup_net is called for the init net namespace
only (int the CONFIG_NET_NS=n of course) from the __init
function, so mark it as __net_init to disappear with the
caller after the boot.

Yet again, in the perfect world this has to be under
#ifdef CONFIG_NET_NS, but it isn't guaranteed that every
subsystem is registered *after* the init_net_ns is set
up. After we are sure, that we don't start registering
them before the init net setup, we'll be able to move
this code under the ifdef.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The namespace creation/destruction code is never called
if the CONFIG_NET_NS is n, so it's OK to move it under
appropriate ifdef.

The copy_net_ns() in the "n" case checks for flags and
returns -EINVAL when new net ns is requested. In a perfect
world this stub must be in net_namespace.h, but this
function need to know the CLONE_NEWNET value and thus
requires sched.h. On the other hand this header is to be
injected into almost every .c file in the networking code,
and making all this code depend on the sched.h is a
suicidal attempt.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When the CONFIG_NET_NS is n there's no need in refcounting
the initial net namespace. So relax this code by making a
stupid stubs for the "n" case.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When the new pernet something (subsys, device or operations) is
being registered, the init callback is to be called for each
namespace, that currently exitst in the system. During the
unregister, the same is to be done with the exit callback.

However, not every pernet something has both calls, but the
check for the appropriate pointer to be not NULL is performed
inside the for_each_net() loop.

This is (at least) strange, so tune this.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Finally, the zero_it argument can be completely removed from
the callers and from the function prototype.

Besides, fix the checkpatch.pl warnings about using the
assignments inside if-s.

This patch is rather big, and it is a part of the previous one.
I splitted it wishing to make the patches more readable. Hope 
this particular split helped.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

At this point nobody calls the sk_alloc(() with zero_it == 0,
so remove unneeded checks from it.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The sk_prot_alloc() already performs all the stuff needed by the
sk_clone(). Besides, the sk_prot_alloc() requires almost twice
less arguments than the sk_alloc() does, so call the sk_prot_alloc()
saving the stack a bit.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The security_sk_alloc() and the module_get is a part of the
object allocations - move it in the proper place.

Note, that since we do not reset the newly allocated sock
in the sk_alloc() (memset() is removed with the previous
patch) we can safely do this.

Also fix the error path in sk_prot_alloc() - release the security
context if needed.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We have a __GFP_ZERO flag that allocates a zeroed chunk of memory.
Use it in the sk_alloc() and avoid a hand-made memset().

This is a temporary patch that will help us in the nearest future :)
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The sock object is allocated either from the generic cache with
the kmalloc, or from the proc->slab cache.

Move this logic into an isolated set of helpers and make the
sk_alloc/sk_free look a bit nicer.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The sock_copy() is supposed to just clone the socket. In a perfect
world it has to be just memcpy, but we have to handle the security
mark correctly. All the extra setup must be performed in sk_clone() 
call, so move the get_net() into more proper place.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The sock_copy() call is not used outside the sock.c file,
so just move it into a sock.c
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Similar to commit 3eec0047, point of this is to avoid
skipping R-bit skbs.
Signed-off-by: NIlpo Jrvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

DSACK inside another SACK block were missed if start_seq of DSACK
was larger than SACK block's because sorting prioritizes full
processing of the SACK block before DSACK. After SACK block
sorting situation is like this:

             SSSSSSSSS
                  D
                        SSSSSS
                               SSSSSSS

Because write_queue is walked in-order, when the first SACK block
has been processed, TCP is already past the skb for which the
DSACK arrived and we haven't taught it to backtrack (nor should
we), so TCP just continues processing by going to the next SACK
block after the DSACK (if any).

Whenever such DSACK is present, do an embedded checking during
the previous SACK block.

If the DSACK is below snd_una, there won't be overlapping SACK
block, and thus no problem in that case. Also if start_seq of
the DSACK is equal to the actual block, it will be processed
first.

Tested this by using netem to duplicate 15% of packets, and
by printing SACK block when found_dup_sack is true and the 
selected skb in the dup_sack = 1 branch (if taken):

  SACK block 0: 4344-5792 (relative to snd_una 2019137317)
  SACK block 1: 4344-5792 (relative to snd_una 2019137317) 

equal start seqnos => next_dup = 0, dup_sack = 1 won't occur...

  SACK block 0: 5792-7240 (relative to snd_una 2019214061)
  SACK block 1: 2896-7240 (relative to snd_una 2019214061)
  DSACK skb match 5792-7240 (relative to snd_una)

...and next_dup = 1 case (after the not shown start_seq sort),
went to dup_sack = 1 branch.
Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This was found by make randconfig

If the kernel .text is very large, the .fixup section branches
are too far away to be relocated correctly.

Use "sethi %hi(label), reg; jmpl reg + %lo(label); %g0" sequence
instead of the branch to fix this.

There is another case in switch_to() involving a branch, which
is fixed similarly.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We can't export verify_compat_iovec when CONFIG_NET is
disabled, and consequently the Solaris compat module
should also depend upon CONFIG_NET.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When CONFIG_BUG is turned off, the standard trick of:

	switch (x) {
	case X:
	...
	case Y:
	...
	default:
		BUG();
	};

to mark impossible cases does not work because BUG() evalutes
to nothing and thus GCC just sees a fallthrough code path.

Add an explicit KERN_ERR log message and a do_exit() to trap
this case.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It is unused since we went to an I-cache flush that solely used
the 'flush' instruction, and it's presence breaks the build
when PAGE_SIZE is 512KB.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We're using '&' instead of '&&'.

Noticed by Roel Kluin.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6:
  Revert "Driver core: remove class_device_*_bin_file"

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 4634/1: DaVinci GPIO header build fix
  [ARM] 4636/1: pxa: add default configuration for zylonite
  [ARM] 4635/1: pxa: Change Eric Miao's email address to eric.miao@marvell.com
  [ARM] Fix assignment instead of condition in arm/mach-omap2/clock.c
  [ARM] nommu: fix breakage caused by f9720205
  [ARM] pxa: shut up CLOCK_EVT_MODE_RESUME warning
  [ARM] Fix FIQ issue with ARM926
  [ARM] Fix pxamci regression
  [ARM] Fix netx_defconfig regression
  [ARM] Fix ateb9200_defconfig build regression
  [ARM] Fix an rpc_defconfig regression
  [ARM] Fix omap_h2_1610_defconfig regressions
  [ARM] 4632/1: Fix a typo in include/asm-arm/plat-s3c/regs-nand.h

This reverts commit fcd239d3.

I messed up, ia64 still uses these files in the current tree, and now
can not build the pci code, which all ia64 boxes seem to require :)

This fixes that mistake.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch removes dead code spotted by the Intel C Compiler.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

The ohci_enable() function shared between pci_probe and pci_resume
takes a host endian config rom, but ohci->config_rom is __be32.  This
sets up the config rom in the wrong endian on little endian machine,
specifically, BusOptions will be initialized to a 0 max receive size.

This patch changes the way we reuse the config rom so that we avoid
this problem.
Signed-off-by: NKristian Hoegsberg <krh@redhat.com>
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

The kernel has for random historical reasons allowed ptrace() accesses
to access (and insert) pages into the page cache above the size of the
file.

However, Nick broke that by mistake when doing the new fault handling in
commit 54cb8821 ("mm: merge populate and
nopage into fault (fixes nonlinear)".  The breakage caused a hang with
gdb when trying to access the invalid page.

The ptrace "feature" really isn't worth resurrecting, since it really is
wrong both from a portability _and_ from an internal page cache validity
standpoint.  So this removes those old broken remnants, and fixes the
ptrace() hang in the process.

Noticed and bisected by Duane Griffin, who also supplied a test-case
(quoth Nick: "Well that's probably the best bug report I've ever had,
thanks Duane!").

Cc: Duane Griffin <duaneg@dghda.com>
Acked-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This fixes a build problem with GPIOs on DaVinci.  Since it inlines
operations for on-chip GPIOs, it needs some headers to support those
direct register accesses.  Those headers won't be included on other
platforms, since they don't have that optimization.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Acked-by: NKevin Hilman <khilman@mvista.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: Neric miao <eric.miao@marvell.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: Neric miao <eric.miao@marvell.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Fix assignment instead of condition
Signed-off-by: NRoel Kluin <12o3l@tiscali.nl>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Someone forgot to use 'ls include/asm-*/flat.h' or
'grep -r flat_get_addr_from_rp .' to find all architectures which
may be affected by their change.  Fix the fall out.
Noticed-by: NRobert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Resolve:
  CC      arch/arm/mach-pxa/time.o
arch/arm/mach-pxa/time.c: In function `pxa_osmr0_set_mode':
arch/arm/mach-pxa/time.c:154: warning: enumeration value `CLOCK_EVT_MODE_RESUME' not handled in switch
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Jon Eibertzon writes:
> We have noticed that the I-cache is disabled while waiting for
> interrupt in cpu_arm926_do_idle in arch/arm/mm/proc-arm926.S
> and we are curious to know why, because this causes us a great
> performance hit when executing in FIQ-handlers. Is it assumed
> here that every individual FIQ-handler re-enables the I-cache?

The I-cache disable is an errata workaround, so the solution is to
disable FIQs across the section with the I-cache disabled.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Fix:

WARNING: at arch/arm/mach-pxa/clock.c:69 clk_disable()
[<c002d7c8>] (dump_stack+0x0/0x14) from [<c00334f4>] (clk_disable+0x34/0xa0)
[<c00334c0>] (clk_disable+0x0/0xa0) from [<c028a43c>] (pxamci_set_ios+0x74/0xf0)
[<c028a3c8>] (pxamci_set_ios+0x0/0xf0) from [<c0281548>] (mmc_power_off+0x90/0x9c)
[<c02814b8>] (mmc_power_off+0x0/0x9c) from [<c0281a30>] (mmc_start_host+0x18/0x28)
[<c0281a18>] (mmc_start_host+0x0/0x28) from [<c02825a0>] (mmc_add_host+0xe8/0x104)
[<c02824b8>] (mmc_add_host+0x0/0x104) from [<c028a7d0>] (pxamci_probe+0x24c/0x2f4)
[<c028a584>] (pxamci_probe+0x0/0x2f4) from [<c01e5948>] (platform_drv_probe+0x20/0x24)
...
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Fix:

  CC      arch/arm/mach-netx/xc.o
arch/arm/mach-netx/xc.c: In function 'request_xc':
arch/arm/mach-netx/xc.c:192: error: 'struct kobject' has no member named 'name'
arch/arm/mach-netx/xc.c:196: error: 'struct kobject' has no member named 'name'
arch/arm/mach-netx/xc.c:200: error: 'struct kobject' has no member named 'name'
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>