- 03 8月, 2017 11 次提交
-
-
由 Mike Rapoport 提交于
In the non-cooperative userfaultfd case, the process exit may race with outstanding mcopy_atomic called by the uffd monitor. Returning -ENOSPC instead of -EINVAL when mm is already gone will allow uffd monitor to distinguish this case from other error conditions. Unfortunately I overlooked userfaultfd_zeropage when updating userfaultd_copy(). Link: http://lkml.kernel.org/r/1501136819-21857-1-git-send-email-rppt@linux.vnet.ibm.com Fixes: 96333187 ("userfaultfd_copy: return -ENOSPC in case mm has gone") Signed-off-by: NMike Rapoport <rppt@linux.vnet.ibm.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Pavel Emelyanov <xemul@virtuozzo.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Heiko Carstens 提交于
Andre Wild reported the following warning: WARNING: CPU: 2 PID: 1205 at kernel/cpu.c:240 lockdep_assert_cpus_held+0x4c/0x60 Modules linked in: CPU: 2 PID: 1205 Comm: bash Not tainted 4.13.0-rc2-00022-gfd2b2c57 #10 Hardware name: IBM 2964 N96 702 (z/VM 6.4.0) task: 00000000701d8100 task.stack: 0000000073594000 Krnl PSW : 0704f00180000000 0000000000145e24 (lockdep_assert_cpus_held+0x4c/0x60) ... Call Trace: lockdep_assert_cpus_held+0x42/0x60) stop_machine_cpuslocked+0x62/0xf0 build_all_zonelists+0x92/0x150 numa_zonelist_order_handler+0x102/0x150 proc_sys_call_handler.isra.12+0xda/0x118 proc_sys_write+0x34/0x48 __vfs_write+0x3c/0x178 vfs_write+0xbc/0x1a0 SyS_write+0x66/0xc0 system_call+0xc4/0x2b0 locks held by bash/1205: #0: (sb_writers#4){.+.+.+}, at: vfs_write+0xa6/0x1a0 #1: (zl_order_mutex){+.+...}, at: numa_zonelist_order_handler+0x44/0x150 #2: (zonelists_mutex){+.+...}, at: numa_zonelist_order_handler+0xf4/0x150 Last Breaking-Event-Address: lockdep_assert_cpus_held+0x48/0x60 This can be easily triggered with e.g. echo n > /proc/sys/vm/numa_zonelist_order In commit 3f906ba2 ("mm/memory-hotplug: switch locking to a percpu rwsem") memory hotplug locking was changed to fix a potential deadlock. This also switched the stop_machine() invocation within build_all_zonelists() to stop_machine_cpuslocked() which now expects that online cpus are locked when being called. This assumption is not true if build_all_zonelists() is being called from numa_zonelist_order_handler(). In order to fix this simply add a mem_hotplug_begin()/mem_hotplug_done() pair to numa_zonelist_order_handler(). Link: http://lkml.kernel.org/r/20170726111738.38768-1-heiko.carstens@de.ibm.com Fixes: 3f906ba2 ("mm/memory-hotplug: switch locking to a percpu rwsem") Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Reported-by: NAndre Wild <wild@linux.vnet.ibm.com> Acked-by: NMichal Hocko <mhocko@suse.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tetsuo Handa 提交于
When a thread is OOM-killed during swap_readpage() operation, an oops occurs because end_swap_bio_read() is calling wake_up_process() based on an assumption that the thread which called swap_readpage() is still alive. Out of memory: Kill process 525 (polkitd) score 0 or sacrifice child Killed process 525 (polkitd) total-vm:528128kB, anon-rss:0kB, file-rss:4kB, shmem-rss:0kB oom_reaper: reaped process 525 (polkitd), now anon-rss:0kB, file-rss:0kB, shmem-rss:0kB general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC Modules linked in: nf_conntrack_netbios_ns nf_conntrack_broadcast ip6t_rpfilter ipt_REJECT nf_reject_ipv4 ip6t_REJECT nf_reject_ipv6 xt_conntrack ip_set nfnetlink ebtable_nat ebtable_broute bridge stp llc ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_raw iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_raw ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter coretemp ppdev pcspkr vmw_balloon sg shpchp vmw_vmci parport_pc parport i2c_piix4 ip_tables xfs libcrc32c sd_mod sr_mod cdrom ata_generic pata_acpi vmwgfx ahci libahci drm_kms_helper ata_piix syscopyarea sysfillrect sysimgblt fb_sys_fops mptspi scsi_transport_spi ttm e1000 mptscsih drm mptbase i2c_core libata serio_raw CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.13.0-rc2-next-20170725 #129 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/31/2013 task: ffffffffb7c16500 task.stack: ffffffffb7c00000 RIP: 0010:__lock_acquire+0x151/0x12f0 Call Trace: <IRQ> lock_acquire+0x59/0x80 _raw_spin_lock_irqsave+0x3b/0x4f try_to_wake_up+0x3b/0x410 wake_up_process+0x10/0x20 end_swap_bio_read+0x6f/0xf0 bio_endio+0x92/0xb0 blk_update_request+0x88/0x270 scsi_end_request+0x32/0x1c0 scsi_io_completion+0x209/0x680 scsi_finish_command+0xd4/0x120 scsi_softirq_done+0x120/0x140 __blk_mq_complete_request_remote+0xe/0x10 flush_smp_call_function_queue+0x51/0x120 generic_smp_call_function_single_interrupt+0xe/0x20 smp_trace_call_function_single_interrupt+0x22/0x30 smp_call_function_single_interrupt+0x9/0x10 call_function_single_interrupt+0xa7/0xb0 </IRQ> RIP: 0010:native_safe_halt+0x6/0x10 default_idle+0xe/0x20 arch_cpu_idle+0xa/0x10 default_idle_call+0x1e/0x30 do_idle+0x187/0x200 cpu_startup_entry+0x6e/0x70 rest_init+0xd0/0xe0 start_kernel+0x456/0x477 x86_64_start_reservations+0x24/0x26 x86_64_start_kernel+0xf7/0x11a secondary_startup_64+0xa5/0xa5 Code: c3 49 81 3f 20 9e 0b b8 41 bc 00 00 00 00 44 0f 45 e2 83 fe 01 0f 87 62 ff ff ff 89 f0 49 8b 44 c7 08 48 85 c0 0f 84 52 ff ff ff <f0> ff 80 98 01 00 00 8b 3d 5a 49 c4 01 45 8b b3 18 0c 00 00 85 RIP: __lock_acquire+0x151/0x12f0 RSP: ffffa01f39e03c50 ---[ end trace 6c441db499169b1e ]--- Kernel panic - not syncing: Fatal exception in interrupt Kernel Offset: 0x36000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) ---[ end Kernel panic - not syncing: Fatal exception in interrupt Fix it by holding a reference to the thread. [akpm@linux-foundation.org: add comment] Fixes: 23955622 ("swap: add block io poll in swapin path") Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by: NShaohua Li <shli@fb.com> Cc: Tim Chen <tim.c.chen@intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Jens Axboe <axboe@fb.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Minchan Kim 提交于
Mike reported kernel goes oops with ltp:zram03 testcase. zram: Added device: zram0 zram0: detected capacity change from 0 to 107374182400 BUG: unable to handle kernel paging request at 0000306d61727a77 IP: zs_map_object+0xb9/0x260 PGD 0 P4D 0 Oops: 0000 [#1] SMP Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: zram(E) xfs(E) libcrc32c(E) btrfs(E) xor(E) raid6_pq(E) loop(E) ebtable_filter(E) ebtables(E) ip6table_filter(E) ip6_tables(E) iptable_filter(E) ip_tables(E) x_tables(E) af_packet(E) br_netfilter(E) bridge(E) stp(E) llc(E) iscsi_ibft(E) iscsi_boot_sysfs(E) nls_iso8859_1(E) nls_cp437(E) vfat(E) fat(E) intel_powerclamp(E) coretemp(E) cdc_ether(E) kvm_intel(E) usbnet(E) mii(E) kvm(E) irqbypass(E) crct10dif_pclmul(E) crc32_pclmul(E) crc32c_intel(E) iTCO_wdt(E) ghash_clmulni_intel(E) bnx2(E) iTCO_vendor_support(E) pcbc(E) ioatdma(E) ipmi_ssif(E) aesni_intel(E) i5500_temp(E) i2c_i801(E) aes_x86_64(E) lpc_ich(E) shpchp(E) mfd_core(E) crypto_simd(E) i7core_edac(E) dca(E) glue_helper(E) cryptd(E) ipmi_si(E) button(E) acpi_cpufreq(E) ipmi_devintf(E) pcspkr(E) ipmi_msghandler(E) nfsd(E) auth_rpcgss(E) nfs_acl(E) lockd(E) grace(E) sunrpc(E) ext4(E) crc16(E) mbcache(E) jbd2(E) sd_mod(E) ata_generic(E) i2c_algo_bit(E) ata_piix(E) drm_kms_helper(E) ahci(E) syscopyarea(E) sysfillrect(E) libahci(E) sysimgblt(E) fb_sys_fops(E) uhci_hcd(E) ehci_pci(E) ttm(E) ehci_hcd(E) libata(E) drm(E) megaraid_sas(E) usbcore(E) sg(E) dm_multipath(E) dm_mod(E) scsi_dh_rdac(E) scsi_dh_emc(E) scsi_dh_alua(E) scsi_mod(E) efivarfs(E) autofs4(E) [last unloaded: zram] CPU: 6 PID: 12356 Comm: swapon Tainted: G E 4.13.0.g87b2c3fc-default #194 Hardware name: IBM System x3550 M3 -[7944K3G]-/69Y5698 , BIOS -[D6E150AUS-1.10]- 12/15/2010 task: ffff880158d2c4c0 task.stack: ffffc90001680000 RIP: 0010:zs_map_object+0xb9/0x260 Call Trace: zram_bvec_rw.isra.26+0xe8/0x780 [zram] zram_rw_page+0x6e/0xa0 [zram] bdev_read_page+0x81/0xb0 do_mpage_readpage+0x51a/0x710 mpage_readpages+0x122/0x1a0 blkdev_readpages+0x1d/0x20 __do_page_cache_readahead+0x1b2/0x270 ondemand_readahead+0x180/0x2c0 page_cache_sync_readahead+0x31/0x50 generic_file_read_iter+0x7e7/0xaf0 blkdev_read_iter+0x37/0x40 __vfs_read+0xce/0x140 vfs_read+0x9e/0x150 SyS_read+0x46/0xa0 entry_SYSCALL_64_fastpath+0x1a/0xa5 Code: 81 e6 00 c0 3f 00 81 fe 00 00 16 00 0f 85 9f 01 00 00 0f b7 13 65 ff 05 5e 07 dc 7e 66 c1 ea 02 81 e2 ff 01 00 00 49 8b 54 d4 08 <8b> 4a 48 41 0f af ce 81 e1 ff 0f 00 00 41 89 c9 48 c7 c3 a0 70 RIP: zs_map_object+0xb9/0x260 RSP: ffffc90001683988 CR2: 0000306d61727a77 He bisected the problem is [1]. After commit cf8e0fed ("mm/zsmalloc: simplify zs_max_alloc_size handling"), zram doesn't use double pointer for pool->size_class any more in zs_create_pool so counter function zs_destroy_pool don't need to free it, either. Otherwise, it does kfree wrong address and then, kernel goes Oops. Link: http://lkml.kernel.org/r/20170725062650.GA12134@bbox Fixes: cf8e0fed ("mm/zsmalloc: simplify zs_max_alloc_size handling") Signed-off-by: NMinchan Kim <minchan@kernel.org> Reported-by: NMike Galbraith <efault@gmx.de> Tested-by: NMike Galbraith <efault@gmx.de> Reviewed-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Jerome Marchand <jmarchan@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jonathan Corbet 提交于
The kerneldoc comment for kthread_create() had an incorrect argument name, leading to a warning in the docs build. Correct it, and make one more small step toward a warning-free build. Link: http://lkml.kernel.org/r/20170724135916.7f486c6f@lwn.netSigned-off-by: NJonathan Corbet <corbet@lwn.net> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Arnd Bergmann 提交于
gcc-7 produces this warning: mm/kasan/report.c: In function 'kasan_report': mm/kasan/report.c:351:3: error: 'info.first_bad_addr' may be used uninitialized in this function [-Werror=maybe-uninitialized] print_shadow_for_address(info->first_bad_addr); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ mm/kasan/report.c:360:27: note: 'info.first_bad_addr' was declared here The code seems fine as we only print info.first_bad_addr when there is a shadow, and we always initialize it in that case, but this is relatively hard for gcc to figure out after the latest rework. Adding an intialization to the most likely value together with the other struct members shuts up that warning. Fixes: b235b9808664 ("kasan: unify report headers") Link: https://patchwork.kernel.org/patch/9641417/ Link: http://lkml.kernel.org/r/20170725152739.4176967-1-arnd@arndb.deSigned-off-by: NArnd Bergmann <arnd@arndb.de> Suggested-by: NAlexander Potapenko <glider@google.com> Suggested-by: NAndrey Ryabinin <aryabinin@virtuozzo.com> Acked-by: NAndrey Ryabinin <aryabinin@virtuozzo.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mike Rapoport 提交于
When mremap is called with MREMAP_FIXED it unmaps memory at the destination address without notifying userfaultfd monitor. If the destination were registered with userfaultfd, the monitor has no way to distinguish between the old and new ranges and to properly relate the page faults that would occur in the destination region. Fixes: 897ab3e0 ("userfaultfd: non-cooperative: add event for memory unmaps") Link: http://lkml.kernel.org/r/1500276876-3350-1-git-send-email-rppt@linux.vnet.ibm.comSigned-off-by: NMike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: NPavel Emelyanov <xemul@virtuozzo.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mel Gorman 提交于
Nadav Amit identified a theoritical race between page reclaim and mprotect due to TLB flushes being batched outside of the PTL being held. He described the race as follows: CPU0 CPU1 ---- ---- user accesses memory using RW PTE [PTE now cached in TLB] try_to_unmap_one() ==> ptep_get_and_clear() ==> set_tlb_ubc_flush_pending() mprotect(addr, PROT_READ) ==> change_pte_range() ==> [ PTE non-present - no flush ] user writes using cached RW PTE ... try_to_unmap_flush() The same type of race exists for reads when protecting for PROT_NONE and also exists for operations that can leave an old TLB entry behind such as munmap, mremap and madvise. For some operations like mprotect, it's not necessarily a data integrity issue but it is a correctness issue as there is a window where an mprotect that limits access still allows access. For munmap, it's potentially a data integrity issue although the race is massive as an munmap, mmap and return to userspace must all complete between the window when reclaim drops the PTL and flushes the TLB. However, it's theoritically possible so handle this issue by flushing the mm if reclaim is potentially currently batching TLB flushes. Other instances where a flush is required for a present pte should be ok as either the page lock is held preventing parallel reclaim or a page reference count is elevated preventing a parallel free leading to corruption. In the case of page_mkclean there isn't an obvious path that userspace could take advantage of without using the operations that are guarded by this patch. Other users such as gup as a race with reclaim looks just at PTEs. huge page variants should be ok as they don't race with reclaim. mincore only looks at PTEs. userfault also should be ok as if a parallel reclaim takes place, it will either fault the page back in or read some of the data before the flush occurs triggering a fault. Note that a variant of this patch was acked by Andy Lutomirski but this was for the x86 parts on top of his PCID work which didn't make the 4.13 merge window as expected. His ack is dropped from this version and there will be a follow-on patch on top of PCID that will include his ack. [akpm@linux-foundation.org: tweak comments] [akpm@linux-foundation.org: fix spello] Link: http://lkml.kernel.org/r/20170717155523.emckq2esjro6hf3z@suse.deReported-by: NNadav Amit <nadav.amit@gmail.com> Signed-off-by: NMel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: <stable@vger.kernel.org> [v4.4+] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kefeng Wang 提交于
After commit 3d375d78 ("mm: update callers to use HASH_ZERO flag"), drop unused pidhash_size in pidhash_init(). Link: http://lkml.kernel.org/r/1500389267-49222-1-git-send-email-wangkefeng.wang@huawei.comSigned-off-by: NKefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by: NPavel Tatashin <Pasha.Tatashin@Oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Daniel Jordan 提交于
Commit 9a291a7c ("mm/hugetlb: report -EHWPOISON not -EFAULT when FOLL_HWPOISON is specified") causes __get_user_pages to ignore certain errors from follow_hugetlb_page. After such error, __get_user_pages subsequently calls faultin_page on the same VMA and start address that follow_hugetlb_page failed on instead of returning the error immediately as it should. In follow_hugetlb_page, when hugetlb_fault returns a value covered under VM_FAULT_ERROR, follow_hugetlb_page returns it without setting nr_pages to 0 as __get_user_pages expects in this case, which causes the following to happen in __get_user_pages: the "while (nr_pages)" check succeeds, we skip the "if (!vma..." check because we got a VMA the last time around, we find no page with follow_page_mask, and we call faultin_page, which calls hugetlb_fault for the second time. This issue also slightly changes how __get_user_pages works. Before, it only returned error if it had made no progress (i = 0). But now, follow_hugetlb_page can clobber "i" with an error code since its new return path doesn't check for progress. So if "i" is nonzero before a failing call to follow_hugetlb_page, that indication of progress is lost and __get_user_pages can return error even if some pages were successfully pinned. To fix this, change follow_hugetlb_page so that it updates nr_pages, allowing __get_user_pages to fail immediately and restoring the "error only if no progress" behavior to __get_user_pages. Tested that __get_user_pages returns when expected on error from hugetlb_fault in follow_hugetlb_page. Fixes: 9a291a7c ("mm/hugetlb: report -EHWPOISON not -EFAULT when FOLL_HWPOISON is specified") Link: http://lkml.kernel.org/r/1500406795-58462-1-git-send-email-daniel.m.jordan@oracle.comSigned-off-by: NDaniel Jordan <daniel.m.jordan@oracle.com> Acked-by: NPunit Agrawal <punit.agrawal@arm.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: James Morse <james.morse@arm.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: zhong jiang <zhongjiang@huawei.com> Cc: <stable@vger.kernel.org> [4.12.x] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.infradead.org/linux-platform-drivers-x86由 Linus Torvalds 提交于
Pull x86 platform driver fixes from Darren Hart: "Fix two bugs under error or abnormal usage conditions. Correct a config dependency: dell-wmi: - Fix driver interface version query wmi: - Fix error handling in acpi_wmi_init() peaq-wmi: - select INPUT_POLLDEV" * tag 'platform-drivers-x86-v4.13-3' of git://git.infradead.org/linux-platform-drivers-x86: platform/x86: dell-wmi: Fix driver interface version query platform/x86: wmi: Fix error handling in acpi_wmi_init() platform/x86: peaq-wmi: select INPUT_POLLDEV
-
- 02 8月, 2017 3 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi由 Linus Torvalds 提交于
Pull SCSI fixes from James Bottomley: "These seven patches are mostly minor build, Kconfig and error leg fixes" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: qedi: Fix return code in qedi_ep_connect() scsi: lpfc: fix linking against modular NVMe support scsi: scsi_transport_fc: return -EBUSY for deleted vport scsi: libcxgbi: add check for valid cxgbi_task_data scsi: aic7xxx: fix firmware build with O=path scsi: megaraid_sas: fix memleak in megasas_alloc_cmdlist_fusion scsi: qedi: Add ISCSI_BOOT_SYSFS to Kconfig
-
由 Andy Lutomirski 提交于
When I converted dell-wmi to the new bus infrastructure, I left the call to dell_wmi_check_descriptor_buffer() in dell_wmi_init(). This could cause two problems: - An error message when loading the driver on a system without dell-wmi. We'd try to read the event descriptor even if the WMI GUID wasn't there. - A possible race if dell-wmi was loaded manually before wmi was fully initialized. Fix it by moving the call to the probe function where it belongs. Fixes: bff589be ("platform/x86: dell-wmi: Convert to the WMI bus infrastructure") Signed-off-by: NAndy Lutomirski <luto@kernel.org> Reviewed-by: NPali Rohár <pali.rohar@gmail.com> Signed-off-by: NDarren Hart (VMware) <dvhart@infradead.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux由 Linus Torvalds 提交于
Pull parsic fixes from Helge Deller: - Our cache flushing code ran into a BUG in case context is not current. Fix it by flushing the whole cache in such rare situations (by Dave Anglin). - Fix a "sleeping function called from invalid context BUG" in our pdc_stable driver by rearranging our locks (by James Bottomley) - The thread and irq stacks require more than 16 KB since kernel 4.11. Increase both to 32 KB. - Define CONFIG_CPU_BIG_ENDIAN unconditionally on parisc to avoid wrong behaviour in qrwlock functions (by Babu Moger). * 'parisc-4.13-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Define CONFIG_CPU_BIG_ENDIAN parisc: pdc_stable: Fix locking when creating sysfs links parisc: Increase thread and stack size to 32kb parisc: Handle vma's whose context is not current in flush_cache_range
-
- 01 8月, 2017 14 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Handle notifier registry failures properly in tun/tap driver, from Tonghao Zhang. 2) Fix bpf verifier handling of subtraction bounds and add a testcase for this, from Edward Cree. 3) Increase reset timeout in ftgmac100 driver, from Ben Herrenschmidt. 4) Fix use after free in prd_retire_rx_blk_timer_exired() in AF_PACKET, from Cong Wang. 5) Fix SElinux regression due to recent UDP optimizations, from Paolo Abeni. 6) We accidently increment IPSTATS_MIB_FRAGFAILS in the ipv6 code paths, fix from Stefano Brivio. 7) Fix some mem leaks in dccp, from Xin Long. 8) Adjust MDIO_BUS kconfig deps to avoid build errors, from Arnd Bergmann. 9) Mac address length check and buffer size fixes from Cong Wang. 10) Don't leak sockets in ipv6 udp early demux, from Paolo Abeni. 11) Fix return value when copy_from_user() fails in bpf_prog_get_info_by_fd(), from Daniel Borkmann. 12) Handle PHY_HALTED properly in phy library state machine, from Florian Fainelli. 13) Fix OOPS in fib_sync_down_dev(), from Ido Schimmel. 14) Fix truesize calculation in virtio_net which led to performance regressions, from Michael S Tsirkin. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (76 commits) samples/bpf: fix bpf tunnel cleanup udp6: fix jumbogram reception ppp: Fix a scheduling-while-atomic bug in del_chan Revert "net: bcmgenet: Remove init parameter from bcmgenet_mii_config" virtio_net: fix truesize for mergeable buffers mv643xx_eth: fix of_irq_to_resource() error check MAINTAINERS: Add more files to the PHY LIBRARY section ipv4: fib: Fix NULL pointer deref during fib_sync_down_dev() net: phy: Correctly process PHY_HALTED in phy_stop_machine() sunhme: fix up GREG_STAT and GREG_IMASK register offsets bpf: fix bpf_prog_get_info_by_fd to dump correct xlated_prog_len tcp: avoid bogus gcc-7 array-bounds warning net: tc35815: fix spelling mistake: "Intterrupt" -> "Interrupt" bpf: don't indicate success when copy_from_user fails udp6: fix socket leak on early demux net: thunderx: Fix BGX transmit stall due to underflow Revert "vhost: cache used event for better performance" team: use a larger struct for mac address net: check dev->addr_len for dev_set_mac_address() phy: bcm-ns-usb3: fix MDIO_BUS dependency ...
-
由 William Tu 提交于
test_tunnel_bpf.sh fails to remove the vxlan11 tunnel device, causing the next geneve tunnelling test case fails. In addition, the geneve reserved bit in tcbpf2_kern.c should be zero, according to the RFC. Signed-off-by: NWilliam Tu <u9012063@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paolo Abeni 提交于
Since commit 67a51780 ("ipv6: udp: leverage scratch area helpers") udp6_recvmsg() read the skb len from the scratch area, to avoid a cache miss. But the UDP6 rx path support RFC 2675 UDPv6 jumbograms, and their length exceeds the 16 bits available in the scratch area. As a side effect the length returned by recvmsg() is: <ingress datagram len> % (1<<16) This commit addresses the issue allocating one more bit in the IP6CB flags field and setting it for incoming jumbograms. Such field is still in the first cacheline, so at recvmsg() time we can check it and fallback to access skb->len if required, without a measurable overhead. Fixes: 67a51780 ("ipv6: udp: leverage scratch area helpers") Signed-off-by: NPaolo Abeni <pabeni@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gao Feng 提交于
The PPTP set the pptp_sock_destruct as the sock's sk_destruct, it would trigger this bug when __sk_free is invoked in atomic context, because of the call path pptp_sock_destruct->del_chan->synchronize_rcu. Now move the synchronize_rcu to pptp_release from del_chan. This is the only one case which would free the sock and need the synchronize_rcu. The following is the panic I met with kernel 3.3.8, but this issue should exist in current kernel too according to the codes. BUG: scheduling while atomic __schedule_bug+0x5e/0x64 __schedule+0x55/0x580 ? ppp_unregister_channel+0x1cd5/0x1de0 [ppp_generic] ? dev_hard_start_xmit+0x423/0x530 ? sch_direct_xmit+0x73/0x170 __cond_resched+0x16/0x30 _cond_resched+0x22/0x30 wait_for_common+0x18/0x110 ? call_rcu_bh+0x10/0x10 wait_for_completion+0x12/0x20 wait_rcu_gp+0x34/0x40 ? wait_rcu_gp+0x40/0x40 synchronize_sched+0x1e/0x20 0xf8417298 0xf8417484 ? sock_queue_rcv_skb+0x109/0x130 __sk_free+0x16/0x110 ? udp_queue_rcv_skb+0x1f2/0x290 sk_free+0x16/0x20 __udp4_lib_rcv+0x3b8/0x650 Signed-off-by: NGao Feng <gfree.wind@vip.163.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
This reverts commit 28b45910 ("net: bcmgenet: Remove init parameter from bcmgenet_mii_config") because in the process of moving from dev_info() to dev_info_once() we essentially lost the helpful printed messages once the second instance of the driver is loaded. dev_info_once() does not actually print the message once per device instance, but once period. Fixes: 28b45910 ("net: bcmgenet: Remove init parameter from bcmgenet_mii_config") Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Reviewed-by: NDoug Berger <opendmb@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael S. Tsirkin 提交于
Seth Forshee noticed a performance degradation with some workloads. This turns out to be due to packet drops. Euan Kemp noticed that this is because we drop all packets where length exceeds the truesize, but for some packets we add in extra memory without updating the truesize. This in turn was kept around unchanged from ab7db917 ("virtio-net: auto-tune mergeable rx buffer size for improved performance"). That commit had an internal reason not to account for the extra space: not enough bits to do it. No longer true so let's account for the allocated length exactly. Many thanks to Seth Forshee for the report and bisecting and Euan Kemp for debugging the issue. Fixes: 680557cf ("virtio_net: rework mergeable buffer handling") Reported-by: NEuan Kemp <euan.kemp@coreos.com> Tested-by: NEuan Kemp <euan.kemp@coreos.com> Reported-by: NSeth Forshee <seth.forshee@canonical.com> Tested-by: NSeth Forshee <seth.forshee@canonical.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sergei Shtylyov 提交于
of_irq_to_resource() has recently been fixed to return negative error #'s along with 0 in case of failure, however the Marvell MV643xx Ethernet driver still only regards 0 as invalid IRQ -- fix it up. Fixes: 7a4228bb ("of: irq: use of_irq_get() in of_irq_to_resource()") Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
Include missing files that are provided by, used, or directly maintained within the PHY LIBRARY, this include uapi header, header files used by Device Tree code etc. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ido Schimmel 提交于
Michał reported a NULL pointer deref during fib_sync_down_dev() when unregistering a netdevice. The problem is that we don't check for 'in_dev' being NULL, which can happen in very specific cases. Usually routes are flushed upon NETDEV_DOWN sent in either the netdev or the inetaddr notification chains. However, if an interface isn't configured with any IP address, then it's possible for host routes to be flushed following NETDEV_UNREGISTER, after NULLing dev->ip_ptr in inetdev_destroy(). To reproduce: $ ip link add type dummy $ ip route add local 1.1.1.0/24 dev dummy0 $ ip link del dev dummy0 Fix this by checking for the presence of 'in_dev' before referencing it. Fixes: 982acb97 ("ipv4: fib: Notify about nexthop status changes") Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Reported-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl> Tested-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
Marc reported that he was not getting the PHY library adjust_link() callback function to run when calling phy_stop() + phy_disconnect() which does not indeed happen because we set the state machine to PHY_HALTED but we don't get to run it to process this state past that point. Fix this with a synchronous call to phy_state_machine() in order to have the state machine actually act on PHY_HALTED, set the PHY device's link down, turn the network device's carrier off and finally call the adjust_link() function. Reported-by: NMarc Gonzalez <marc_gonzalez@sigmadesigns.com> Fixes: a390d1f3 ("phylib: convert state_queue work to delayed_work") Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NMarc Gonzalez <marc_gonzalez@sigmadesigns.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mark Cave-Ayland 提交于
Update the values to match those from the STP2002QFP documentation. Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup由 Linus Torvalds 提交于
Pull cgroup fixes from Tejun Heo: "Several cgroup bug fixes. - cgroup core was calling a migration callback on empty migrations, which could make cpuset crash. - There was a very subtle bug where the controller interface files aren't created directly when cgroup2 is mounted. Because later operations create them, this bug didn't get noticed earlier. - Failed writes to cgroup.subtree_control were incorrectly returning zero" * 'for-4.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: fix error return value from cgroup_subtree_control() cgroup: create dfl_root files on subsys registration cgroup: don't call migration methods if there are no tasks to migrate
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq由 Linus Torvalds 提交于
Pull workqueue fixes from Tejun Heo: "Two notable fixes. - While adding NUMA affinity support to unbound workqueues, the assumption that an unbound workqueue with max_active == 1 is ordered was broken. The plan was to use explicit alloc_ordered_workqueue() for those cases. Unfortunately, I forgot to update the documentation properly and we grew a handful of use cases which depend on that assumption. While we want to convert them to alloc_ordered_workqueue(), we don't really lose anything by enforcing ordered execution on unbound max_active == 1 workqueues and it doesn't make sense to risk subtle bugs. Restore the assumption. - Workqueue assumes that CPU <-> NUMA node mapping remains static. This is a general assumption - we don't have any synchronization mechanism around CPU <-> node mapping. Unfortunately, powerpc may change the mapping dynamically leading to crashes. Michael added a workaround so that we at least don't crash while powerpc hotplug code gets updated" * 'for-4.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: Work around edge cases for calc of pool's cpumask workqueue: implicit ordered attribute should be overridable workqueue: restore WQ_UNBOUND/max_active==1 to be ordered
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata由 Linus Torvalds 提交于
Pull libata fixes from Tejun Heo: "Dan found a really old bug where libata hotplug code wasn't sanitizing index value from userland and may end up indexing with a negative number. It is scary but fortunately can only be triggered by root. Other than that, minor fixes" * 'for-4.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: libata: fix a couple of doc build warnings libata: array underflow in ata_find_dev() ata: sata_rcar: add gen[23] fallback compatibility strings libata: remove unused rc in ata_eh_handle_port_resume libata: Cleanup ata_read_log_page() ata: fix gemini Kconfig dependencies
-
- 31 7月, 2017 10 次提交
-
-
由 Babu Moger 提交于
While working on enabling queued rwlock on SPARC, found this following code in include/asm-generic/qrwlock.h which uses CONFIG_CPU_BIG_ENDIAN to clear a byte. static inline u8 *__qrwlock_write_byte(struct qrwlock *lock) { return (u8 *)lock + 3 * IS_BUILTIN(CONFIG_CPU_BIG_ENDIAN); } Problem is many of the fixed big endian architectures don't define CPU_BIG_ENDIAN and clears the wrong byte. Define CPU_BIG_ENDIAN for parisc architecture to fix it. Signed-off-by: NBabu Moger <babu.moger@oracle.com> Signed-off-by: NHelge Deller <deller@gmx.de>
-
由 Jonathan Corbet 提交于
The kerneldoc comments for a couple of functions in drivers/ata/libata-eh.c had fallen behind the current implementation, resulting in these doc build warnings: ./drivers/ata/libata-eh.c:1449: warning: No description found for parameter 'link' ./drivers/ata/libata-eh.c:1449: warning: Excess function parameter 'ap' description in 'ata_eh_done' ./drivers/ata/libata-eh.c:1590: warning: No description found for parameter 'qc' ./drivers/ata/libata-eh.c:1590: warning: Excess function parameter 'dev' description in 'ata_eh_request_sense' Update the comments and make the warnings go away. Signed-off-by: NJonathan Corbet <corbet@lwn.net> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 James Bottomley 提交于
There's no need to take the write lock when creating sysfs links. This patch fixes the following BUG: BUG: sleeping function called from invalid context at mm/slab.h:416 in_atomic(): 1, irqs_disabled(): 0, pid: 1, name: swapper/0 CPU: 2 PID: 1 Comm: swapper/0 Not tainted 4.13.0-rc2-00110-g0b5477d9 #111 Backtrace: [<0000000040217ac8>] show_stack+0x20/0x38 [<00000000406fbbb0>] dump_stack+0xb0/0x128 [<0000000040274090>] ___might_sleep+0x180/0x1b8 [<0000000040274144>] __might_sleep+0x7c/0xe8 [<0000000040373874>] kmem_cache_alloc+0x14c/0x1e0 [<0000000040419514>] __kernfs_new_node+0x84/0x1b8 [<000000004041b09c>] kernfs_new_node+0x3c/0x78 [<000000004041e040>] kernfs_create_link+0x40/0xd8 [<000000004041f320>] sysfs_do_create_link_sd.isra.0+0xb0/0x130 [<000000004041f3d4>] sysfs_create_link+0x34/0x58 [<000000004011b4a4>] pdc_stable_init+0x2c4/0x458 [<0000000040200250>] do_one_initcall+0x70/0x1d8 [<0000000040101644>] kernel_init_freeable+0x27c/0x390 [<000000004020be44>] kernel_init+0x24/0x1c0 Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com> Reported-by: NMeelis Roos <mroos@linux.ee> Signed-off-by: NHelge Deller <deller@gmx.de>
-
由 Helge Deller 提交于
Since kernel 4.11 the thread and irq stacks on parisc randomly overflow the default size of 16k. The reason why stack usage suddenly grew is yet unknown. Signed-off-by: NHelge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # 4.11+ Signed-off-by: NHelge Deller <deller@gmx.de>
-
由 John David Anglin 提交于
In testing James' patch to drivers/parisc/pdc_stable.c, I hit the BUG statement in flush_cache_range() during a system shutdown: kernel BUG at arch/parisc/kernel/cache.c:595! CPU: 2 PID: 6532 Comm: kworker/2:0 Not tainted 4.13.0-rc2+ #1 Workqueue: events free_ioctx IAOQ[0]: flush_cache_range+0x144/0x148 IAOQ[1]: flush_cache_page+0x0/0x1a8 RP(r2): flush_cache_range+0xec/0x148 Backtrace: [<00000000402910ac>] unmap_page_range+0x84/0x880 [<00000000402918f4>] unmap_single_vma+0x4c/0x60 [<0000000040291a18>] zap_page_range_single+0x110/0x160 [<0000000040291c34>] unmap_mapping_range+0x174/0x1a8 [<000000004026ccd8>] truncate_pagecache+0x50/0xa8 [<000000004026cd84>] truncate_setsize+0x54/0x70 [<000000004033d534>] put_aio_ring_file+0x44/0xb0 [<000000004033d5d8>] aio_free_ring+0x38/0x140 [<000000004033d714>] free_ioctx+0x34/0xa8 [<00000000401b0028>] process_one_work+0x1b8/0x4d0 [<00000000401b04f4>] worker_thread+0x1b4/0x648 [<00000000401b9128>] kthread+0x1b0/0x208 [<0000000040150020>] end_fault_vector+0x20/0x28 [<0000000040639518>] nf_ip_reroute+0x50/0xa8 [<0000000040638ed0>] nf_ip_route+0x10/0x78 [<0000000040638c90>] xfrm4_mode_tunnel_input+0x180/0x1f8 CPU: 2 PID: 6532 Comm: kworker/2:0 Not tainted 4.13.0-rc2+ #1 Workqueue: events free_ioctx Backtrace: [<0000000040163bf0>] show_stack+0x20/0x38 [<0000000040688480>] dump_stack+0xa8/0x120 [<0000000040163dc4>] die_if_kernel+0x19c/0x2b0 [<0000000040164d0c>] handle_interruption+0xa24/0xa48 This patch modifies flush_cache_range() to handle non current contexts. In as much as this occurs infrequently, the simplest approach is to flush the entire cache when this happens. Signed-off-by: NJohn David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org # 4.9+ Signed-off-by: NHelge Deller <deller@gmx.de>
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Thomas Gleixner: "A small set of x86 fixes: - prevent the kernel from using the EFI reboot method when EFI is disabled. - two patches addressing clang issues" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/boot: Disable the address-of-packed-member compiler warning x86/efi: Fix reboot_mode when EFI runtime services are disabled x86/boot: #undef memcpy() et al in string.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull scheduler fixes from Thomas Gleixner: "Two patches addressing build warnings caused by inconsistent kernel doc comments" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/wait: Clean up some documentation warnings sched/core: Fix some documentation build warnings
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf fixes from Thomas Gleixner: "A couple of fixes for performance counters and kprobes: - a series of small patches which make the uncore performance counters on Skylake server systems work correctly - add a missing instruction slot release to the failure path of kprobes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: kprobes/x86: Release insn_slot in failure path perf/x86/intel/uncore: Fix missing marker for skx_uncore_cha_extra_regs perf/x86/intel/uncore: Fix SKX CHA event extra regs perf/x86/intel/uncore: Remove invalid Skylake server CHA filter field perf/x86/intel/uncore: Fix Skylake server CHA LLC_LOOKUP event umask perf/x86/intel/uncore: Fix Skylake server PCU PMU event format perf/x86/intel/uncore: Fix Skylake UPI PMU event masks
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull irq fix from Thomas Gleixner: "Fix for a regression caused by the conversion of x86 to the generic hotplug code. Instead of doing a plain single line revert, this adds a pile of comments so the semantics of the force argument are clear" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/cpuhotplug: Revert "Set force affinity flag on hotplug migration"
-
- 30 7月, 2017 2 次提交
-
-
由 Daniel Borkmann 提交于
bpf_prog_size(prog->len) is not the correct length we want to dump back to user space. The code in bpf_prog_get_info_by_fd() uses this to copy prog->insnsi to user space, but bpf_prog_size(prog->len) also includes the size of struct bpf_prog itself plus program instructions and is usually used either in context of accounting or for bpf_prog_alloc() et al, thus we copy out of bounds in bpf_prog_get_info_by_fd() potentially. Use the correct bpf_prog_insn_size() instead. Fixes: 1e270976 ("bpf: Add BPF_OBJ_GET_INFO_BY_FD") Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NMartin KaFai Lau <kafai@fb.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnd Bergmann 提交于
When using CONFIG_UBSAN_SANITIZE_ALL, the TCP code produces a false-positive warning: net/ipv4/tcp_output.c: In function 'tcp_connect': net/ipv4/tcp_output.c:2207:40: error: array subscript is below array bounds [-Werror=array-bounds] tp->chrono_stat[tp->chrono_type - 1] += now - tp->chrono_start; ^~ net/ipv4/tcp_output.c:2207:40: error: array subscript is below array bounds [-Werror=array-bounds] tp->chrono_stat[tp->chrono_type - 1] += now - tp->chrono_start; ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ I have opened a gcc bug for this, but distros have already shipped compilers with this problem, and it's not clear yet whether there is a way for gcc to avoid the warning. As the problem is related to the bitfield access, this introduces a temporary variable to store the old enum value. I did not notice this warning earlier, since UBSAN is disabled when building with COMPILE_TEST, and that was always turned on in both allmodconfig and randconfig tests. Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81601Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-