Based on Arnds review comments here https://lkml.org/lkml/2014/11/13/161,
we should not be mixing address spaces in the reg property like this driver
currently does. This patch updates the driver, dt docs and also the existing
dt nodes to pass the sysconfig offset in the syscon dt property.

This patch breaks DT compatibility! But this platform is considered WIP,
and is only used by a few developers who are upstreaming support for it.
This change has been done as a single atomic commit to ensure it is
bisectable.
Signed-off-by: NPeter Griffin <peter.griffin@linaro.org>
Reviewed-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch enables the picoPHY usb phy which is used by
the usb2 and usb3 host controllers when controlling usb2/1.1
devices. It is found in stih407 family SoC's from STMicroelectronics.
Signed-off-by: NPeter Griffin <peter.griffin@linaro.org>
Acked-by: NLee Jones <lee.jones@linaro.org>
Reviewed-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds the DT nodes for the extra ehci and ohci usb controllers
on the stih410 SoC.
Signed-off-by: NPeter Griffin <peter.griffin@linaro.org>
Reviewed-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds the dt nodes for the extra usb2 picophys found on
the stih410.

These two picophys are used in conjunction with the extra ehci/ohci usb
controllers also found on the stih410 SoC.
Signed-off-by: NPeter Griffin <peter.griffin@linaro.org>
Reviewed-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds the dt nodes for the usb2 picophy found on the stih407
device family. It is used on stih407 by the dwc3 usb3 controller when
controlling usb2/1.1 devices.
Signed-off-by: NPeter Griffin <peter.griffin@linaro.org>
Reviewed-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Based on Arnds review comments here https://lkml.org/lkml/2014/11/13/161,
update the miphy365 phy driver to access sysconfig register offsets via
syscfg dt property.

This is because the reg property should not be mixing address spaces
like it does currently for miphy365. This change then also aligns us
to how other platforms such as keystone and bcm7445 pass there syscon
offsets via DT.

This patch breaks DT compatibility, but this platform is considered WIP,
and is only used by a few developers who are upstreaming support for it.
This change has been done as a single atomic commit to ensure it is
bisectable.
Signed-off-by: NPeter Griffin <peter.griffin@linaro.org>
Reviewed-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Based on Arnds review comments here https://lkml.org/lkml/2014/11/13/161,
update the phy driver to not use the reg property to access the sysconfig
register offsets.

This is because other phy's (miphy28, miphy365) have a combination of
memory mapped registers and sysconfig control regs, and we shouldn't
be mixing address spaces in the reg property. In addition we would
ideally like the sysconfig offsets to be passed via DT in a uniform way.

This new method will also allow us to support devices which have sysconfig
registers in different banks more easily and it is also analagous to how
keystone and bcm7745 platforms pass there syscon offsets in DT.

This breaks DT compatibility, but this platform is considered WIP, and
is only used by a few developers who are upstreaming support for it.
Signed-off-by: NPeter Griffin <peter.griffin@linaro.org>
Reviewed-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Included changes:
- remove useless return in void functions
- remove unused member 'primary_iface' from 'struct orig_node'
- improve existing kernel doc
- fix several checkpatch complaints
- ensure socket's control block is cleared for received skbs
- add missing DEBUG_FS dependency to BATMAN_ADV_DEBUG symbol
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes removes older means of upgrading Firmware using MAJOR version
and adds newer interface version checking mechanism.

Please apply this patch on net-next since it depends on previous commits.
Signed-off-by: NPraveen Madhavan <praveenm@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As 456062b3 ("ARM: imx: add FEC sleep mode callback function") has been
reverted, also revert the dts part.

This reverts commit 07b4d2dd ("ARM: dts: imx6qdl: enable FEC
magic-packet feature").
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

i.MX platform maintainer Shawn Guo is not happy with the such commit as
explained below [1]:

"The GPR difference between SoCs can be encoded in device tree as well.
It's pointless to repeat the same code pattern for every single
platform, that need to set up GPR bits for enabling magic packet wake
up, while the only difference is the register and bit offset.

The platform code will become quite messy and unmaintainable if every
device driver dump their GPR register setup code into platform.

Sorry, but it's NACK from me."

This reverts commit 456062b3 ("ARM: imx: add FEC sleep mode callback
function").

[1] http://www.spinics.net/lists/netdev/msg310922.htmlSigned-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Acked-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Delay update of hw tail descriptor if we know that another skb is going
to be sent.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Ying Xue says:

====================
Involve rhashtable_lookup_insert routine

The series aims to involve rhashtable_lookup_insert() to guarantee
that the process of lookup and insertion of an object from/into hash
table is finished atomically, allowing rhashtable's users not to
introduce an extra lock during search and insertion. For example,
tipc socket is the first user benefiting from this enhancement.

v2 changes:
 - fix the issue of waking up worker thread under a wrong condition in
   patch #2, which is pointed by Thomas.
 - move a comment from rhashtable_inser() to rhashtable_wakeup_worker()
   according to Thomas's suggestion in patch #2.
 - indent the third line of condition statement in
   rhashtable_wakeup_worker() to inner bracket in patch #2.
 - drop patch #3 of v1 series
 - fix an issue of being unable to remove an object from hash table in
   certain special case in patch #4.
 - involve a new patch #5 to avoid unnecessary wakeup for worker queue
   thread
 - involve a new patch #6 to initialize atomic "nelems" variable
 - adjust "nelem_hint" value from 256 to 192 avoiding to unnecessarily
   to shrink hash table from the beginning phase in patch #7.

v1 changes:
 But before rhashtable_lookup_insert() is involved, the following
 optimizations need to be first done:
- simplify rhashtable_lookup by reusing rhashtable_lookup_compare()
- introduce rhashtable_wakeup_worker() to further reduce duplicated
  code in patch #2
- fix an issue in patch #3
- involve rhashtable_lookup_insert(). But in this version, we firstly
  use rhashtable_lookup() to search duplicate key in both old and new
  bucket table; secondly introduce another __rhashtable_insert() helper
  function to reduce the duplicated code between rhashtable_insert()
  and rhashtable_lookup_insert().
- add patch #5 into the series as it depends on above patches. But in
  this version, no change is made comparing with its previous version.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As tipc reference table is statically allocated, its memory size
requested on stack initialization stage is quite big even if the
maximum port number is just restricted to 8191 currently, however,
the number already becomes insufficient in practice. But if the
maximum ports is allowed to its theory value - 2^32, its consumed
memory size will reach a ridiculously unacceptable value. Apart from
this, heavy tipc users spend a considerable amount of time in
tipc_sk_get() due to the read-lock on ref_table_lock.

If tipc reference table is converted with generic rhashtable, above
mentioned both disadvantages would be resolved respectively: making
use of the new resizable hash table can avoid locking on the lookup;
smaller memory size is required at initial stage, for example, 256
hash bucket slots are requested at the beginning phase instead of
allocating the entire 8191 slots in old mode. The hash table will
grow if entries exceeds 75% of table size up to a total table size
of 1M, and it will automatically shrink if usage falls below 30%,
but the minimum table size is allowed down to 256.

Also converts ref_table_lock to a separate mutex to protect hash table
mutations on write side. Lastly defers the release of the socket
reference using call_rcu() to allow using an RCU read-side protected
call to rhashtable_lookup().
Signed-off-by: NYing Xue <ying.xue@windriver.com>
Acked-by: NJon Maloy <jon.maloy@ericsson.com>
Acked-by: NErik Hugne <erik.hugne@ericsson.com>
Cc: Thomas Graf <tgraf@suug.ch>
Acked-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NYing Xue <ying.xue@windriver.com>
Cc: Thomas Graf <tgraf@suug.ch>
Acked-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Move condition statements of verifying whether hash table size exceeds
its maximum threshold or reaches its minimum threshold from resizing
functions to resizing decision functions, avoiding unnecessary wakeup
for worker queue thread.
Signed-off-by: NYing Xue <ying.xue@windriver.com>
Cc: Thomas Graf <tgraf@suug.ch>
Acked-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When remove an object from hash table, we currently only traverse old
bucket table to check whether the object exists. If the object is not
found in it, we will try again. But in the second search loop, we still
search the object from the old table instead of future table. As a
result, the object may be not removed from hash table especially when
resizing is currently in progress and the object is just saved in the
future table.
Signed-off-by: NYing Xue <ying.xue@windriver.com>
Cc: Thomas Graf <tgraf@suug.ch>
Acked-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Involve a new function called rhashtable_lookup_insert() which makes
lookup and insertion atomic under bucket lock protection, helping us
avoid to introduce an extra lock when we search and insert an object
into hash table.
Signed-off-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Acked-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Introduce rhashtable_wakeup_worker() helper function to reduce
duplicated code where to wake up worker.

By the way, as long as the both "future_tbl" and "tbl" bucket table
pointers point to the same bucket array, we should try to wake up
the resizing worker thread, otherwise, it indicates the work of
resizing hash table is not finished yet. However, currently we will
wake up the worker thread only when the two pointers point to
different bucket array. Obviously this is wrong. So, the issue is
also fixed as well in the patch.
Signed-off-by: NYing Xue <ying.xue@windriver.com>
Cc: Thomas Graf <tgraf@suug.ch>
Acked-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Define an internal compare function and relevant compare argument,
and then make use of rhashtable_lookup_compare() to lookup key in
hash table, reducing duplicated code between rhashtable_lookup()
and rhashtable_lookup_compare().
Signed-off-by: NYing Xue <ying.xue@windriver.com>
Cc: Thomas Graf <tgraf@suug.ch>
Acked-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Hariprasad Shenai says:

====================
Add support for few debugfs entries

This patch series adds support for devlog, cim_la, cim_qcfg and mps_tcam
debugfs entries.

The patches series is created against 'net-next' tree.
And includes patches on cxgb4 driver.

We have included all the maintainers of respective drivers. Kindly review the
change and let us know in case of any review comments.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Debug log to get the MPS TCAM table
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Adds debug log to get cim queue config
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The CIM LA captures the embedded processor’s internal state. Optionally, it can
also trace the flow of data in and out of the embedded processor. Therefore, the
CIM LA output contains detailed information of what code the embedded processor
executed prior to the CIM LA capture.
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support for device log entry in debugfs
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Vinson reported:

  HOSTCC  Documentation/networking/timestamping/txtimestamp
Documentation/networking/timestamping/txtimestamp.c:64:8: error:
redefinition of ‘struct in6_pktinfo’
 struct in6_pktinfo {
        ^
In file included from /usr/include/arpa/inet.h:23:0,
                 from Documentation/networking/timestamping/txtimestamp.c:33:
/usr/include/netinet/in.h:456:8: note: originally defined here
 struct in6_pktinfo
        ^

After we sync with libc header, we don't need this ugly hack any more.
Reported-by: NVinson Lee <vlee@twopensource.com>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Both netinet/in.h and linux/ipv6.h define these two structs,
if we include both of them, we got:

	/usr/include/linux/ipv6.h:19:8: error: redefinition of ‘struct in6_pktinfo’
	 struct in6_pktinfo {
		^
	In file included from /usr/include/arpa/inet.h:22:0,
			 from txtimestamp.c:33:
	/usr/include/netinet/in.h:524:8: note: originally defined here
	 struct in6_pktinfo
		^
	In file included from txtimestamp.c:40:0:
	/usr/include/linux/ipv6.h:24:8: error: redefinition of ‘struct ip6_mtuinfo’
	 struct ip6_mtuinfo {
		^
	In file included from /usr/include/arpa/inet.h:22:0,
			 from txtimestamp.c:33:
	/usr/include/netinet/in.h:531:8: note: originally defined here
	 struct ip6_mtuinfo
		^
So similarly to what we did for in6_addr, we need to sync with
libc header on their definitions.
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

BATMAN_ADV_DEBUG is using debugfs files for the debugging log. So it
depends on DEBUG_FS which is missing as dependency in the Kconfig file.
Signed-off-by: NMarkus Pargmann <mpa@pengutronix.de>
Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>

Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>

Reported-by: checkpatch
Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>

Since other network components (and some drivers) uses the control block
provided in skb's, the network coding feature might wrongly assume that
an SKB has been decoded, and thus not try to code it with another packet
again. This happens for instance when batman-adv is running on a bridge device.

Fix this by clearing the control block for every received SKB.

Introduced by 3c12de9a
("batman-adv: network coding - code and transmit packets if possible")
Signed-off-by: NMartin Hundebøll <martin@hundeboll.net>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>

Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>

Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>

Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>

Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>

Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>

Signed-off-by: NMartin Hundebøll <martin@hundeboll.net>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>

Signed-off-by: NMartin Hundebøll <martin@hundeboll.net>
Acked-by: NAntonio Quartulli <antonio@meshcoding.com>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>

Signed-off-by: NMartin Hundebøll <martin@hundeboll.net>
Acked-by: NSimon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>

Signed-off-by: NMartin Hundebøll <martin@hundeboll.net>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>