- 24 3月, 2008 4 次提交
-
-
由 Grant Likely 提交于
If the bestcomm initialization fails, calls to the task allocate function should fail gracefully instead of oopsing with a NULL deref. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Grant Likely 提交于
If the reg property is missing from the phy node (unlikely, but possible), then the kernel will oops with a NULL pointer dereference. This fixes it by checking the pointer first. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Olaf Hering 提交于
The global primary_ipic in arch/powerpc/sysdev/ipic.c can remain NULL if ipic_init() fails, which will happen on machines that don't have an ipic interrupt controller. init_ipic_sysfs() will crash in that case. Acked-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Paul Mackerras 提交于
On pSeries, the hypervisor doesn't let us map in the eHEA ethernet adapter using 64k pages, and thus the ehea driver will fail if 64k pages are configured. This works around the problem by always using 4k pages for ioremap on pSeries (but not on other platforms). A better fix would be to check whether the partition could ever have an eHEA adapter, and only force 4k pages if it could, but this will do for 2.6.25. This is based on an earlier patch by Tony Breeds. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 23 3月, 2008 10 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: RDMA/nes: Fix MSS calculation on RDMA path
-
git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: Revert "ide-tape: schedule driver for removal after 6 months" ide: mark "hdx=remap" and "hdx=remap63" kernel parameters as obsoleted ide: mark "hdx=[driver_name]" and "hdx=scsi" kernel parameters as obsoleted ide: Documentation/ide/ide.txt fixes ide: mark special "ide0=" kernel parameters as obsoleted ide: remove commented out entries from ide_pio_blacklist[]
-
git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: [CIFS] Fix mem leak on dfs referral [CIFS] file create with acl support enabled is slow [CIFS] Fix mtime on cp -p when file data cached but written out too late [CIFS] Fix build problem [CIFS] cifs: replace remaining __FUNCTION__ occurrences [CIFS] DFS patch that connects inode with dfs handling ops
-
git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86: x86: revert: reserve dma32 early for gart
-
由 Hans Rosenfeld 提交于
Change pagemap output format to allow for future reporting of huge pages. (Format comment and minor cleanups: mpm@selenic.com) Signed-off-by: NHans Rosenfeld <hans.rosenfeld@amd.com> Signed-off-by: NMatt Mackall <mpm@selenic.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Pierre Ossman 提交于
Suppressing uevents turned out to be a bad idea as it screws up the order of events, making user space very confused. Change the system to use sysfs groups instead. This is a regression that, for some odd reason, has gone unnoticed for some time. It confuses hal so that the block devices (which have the mmc device as a parent) are not registered. End result being that desktop magic when cards are inserted won't work. Signed-off-by: NPierre Ossman <drzeus@drzeus.cx> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Darren Salt 提交于
Increase the number of PnP memory resources from 12 to 24. This removes an "exceeded the max num of mem resources" warning on boot. I also noticed the reservation of two more iomem ranges on the computer on which this was tested. Signed-off-by: NDarren Salt <linux@youmustbejoking.demon.co.uk> Signed-off-by: NIngo Molnar <mingo@elte.hu> Acked-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Bjorn Helgaas 提交于
PNP_MAX_MEM and PNP_MAX_PORT are mainly used to size tables of PNP device resources. In 2.6.24, we increased their values to accomodate ACPI devices that have many resources: 2.6.23 2.6.24 ------ ------ PNP_MAX_MEM 4 12 PNP_MAX_PORT 8 40 However, ISAPNP also used these constants as the size of parts of the logical device register set. This register set is fixed by hardware, so increasing the constants meant that we were reading and writing unintended parts of the register set. This patch changes ISAPNP to use the correct register set sizes (the same values we used prior to 2.6.24). Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Steve French 提交于
Signed-off-by: NIgor Mammedov <niallain@gmail.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Thomas Gleixner 提交于
Revert commit f62f1fc9 Author: Yinghai Lu <yhlu.kernel@gmail.com> Date: Fri Mar 7 15:02:50 2008 -0800 x86: reserve dma32 early for gart The patch has a dependency on bootmem modifications which are not .25 material that late in the -rc cycle. The problem which is addressed by the patch is limited to machines with 256G and more memory booted with NUMA disabled. This is not a .25 regression and the audience which is affected by this problem is very limited, so it's safer to do the revert than pulling in intrusive bootmem changes right now. Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 22 3月, 2008 23 次提交
-
-
This reverts commit d48567dd. Borislav is working on ide-tape "light" version instead. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Mark "hdx=remap" and "hdx=remap63" kernel parameters as obsoleted (they are layering violation and should be dealt with in the same way as done by libata - device-mapper should be used instead). Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Mark "hdx=[driver_name]" and "hdx=scsi" kernel parameters as obsoleted (nowadays device-driver binding can be changed at runtime through sysfs and it can also be dealt with using per device driver parameters). Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* "hdx=cyls,heads,sects,wpcom,irq" should be "hdx=cyls,heads,sects". * "hdx=" is for "x" from 'a' to 'u', "idex=" is for "x" from '0' to '9'. * "idex=noautotune" is long gone. * Obsoleted "ide0=" parameters were already removed from the documentation. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Mark "ide0=ali14xx|cmd640_vlb|dtc2278|ht6560b|qd65xx|umc8672" kernel parameters as obsoleted (per host driver replacements have been available for a long time). Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Chien Tung 提交于
Fix the calculation of the MSS for RDMA connections: we need to allow space in frames for a VLAN tag too. Signed-off-by: NChien Tung <ctung@neteffect.com> Signed-off-by: NGlenn Streiff <gstreiff@neteffect.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Mark Fasheh 提交于
Change my e-mail address, add Joel as new co-maintainer. Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Linus Torvalds 提交于
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched-devel * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched-devel: sched: add arch_update_cpu_topology hook. sched: add exported arch_reinit_sched_domains() to header file. sched: remove double unlikely from schedule() sched: cleanup old and rarely used 'debug' features.
-
由 Yinghai Lu 提交于
so use nodedata_phys directly. Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Matti Linnanvuori 提交于
Fix wrong function name and references to non-x86 architectures. Signed-off-by: Matti Linnanvuori mattilinnanvuori@yahoo.com Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Yinghai Lu 提交于
fix the bug reported here: http://bugzilla.kernel.org/show_bug.cgi?id=10232 use update_memory_range() instead of add_memory_range() directly to avoid closing the gap. ( the new code only affects and runs on systems where the MTRR workaround triggers. ) Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Heinz-Ado Arnolds 提交于
we have seen a little problem in rebooting Dell Optiplex 745 with the 0KW626 board. Here is a small patch enabling reboot with this board, which forces the default reboot path it into the BIOS reboot mode. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Jiri Slaby 提交于
The fault_msg text is not explictly nul terminated now in startup assembly. Do so by converting .ascii to .asciz. Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Pavel Machek 提交于
aperture_64.c takes a piece of memory and makes it into iommu window... but such window may not be saved by swsusp -- that leads to oops during hibernation. Signed-off-by: NPavel Machek <pavel@suse.cz> Acked-by: N"Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Zbigniew Luszpinski 提交于
this patch allows hpet=force on nVidia nForce 430 southbridge. This patch was tested by me on my old Asus A8N-VM CSM (where bios does not support hpet and does not advertise it via acpi entry). My nForce430 version: lspci -nn | grep LPC 00:0a.0 ISA bridge [0601]: nVidia Corporation MCP51 LPC Bridge [10de:0260] (rev a2) Kernel 2.6.24.3 after patching and using hpet=force reports this: dmesg | grep -i hpet Kernel command line: root=/dev/sda8 ro vga=773 video=vesafb:mtrr:4,ywrap vt.default_utf8=0 hpet=force Force enabled HPET at base address 0xfed00000 hpet clockevent registered Time: hpet clocksource has been installed. grep -i hpet /proc/timer_list Clock Event Device: hpet set_next_event: hpet_legacy_next_event set_mode: hpet_legacy_set_mode grep Clock /proc/timer_list (before patching) Clock Event Device: pit Clock Event Device: lapic grep Clock /proc/timer_list (after patching) Clock Event Device: hpet Clock Event Device: lapic Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Yinghai Lu 提交于
a system with 256 GB of RAM, when NUMA is disabled crashes the following way: Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Cannot allocate aperture memory hole (ffff8101c0000000,65536K) Kernel panic - not syncing: Not enough memory for aperture Pid: 0, comm: swapper Not tainted 2.6.25-rc4-x86-latest.git #33 Call Trace: [<ffffffff84037c62>] panic+0xb2/0x190 [<ffffffff840381fc>] ? release_console_sem+0x7c/0x250 [<ffffffff847b1628>] ? __alloc_bootmem_nopanic+0x48/0x90 [<ffffffff847b0ac9>] ? free_bootmem+0x29/0x50 [<ffffffff847ac1f7>] gart_iommu_hole_init+0x5e7/0x680 [<ffffffff847b255b>] ? alloc_large_system_hash+0x16b/0x310 [<ffffffff84506a2f>] ? _etext+0x0/0x1 [<ffffffff847a2e8c>] pci_iommu_alloc+0x1c/0x40 [<ffffffff847ac795>] mem_init+0x45/0x1a0 [<ffffffff8479ff35>] start_kernel+0x295/0x380 [<ffffffff8479f1c2>] _sinittext+0x1c2/0x230 the root cause is : memmap PMD is too big, [ffffe200e0600000-ffffe200e07fffff] PMD ->ffff81383c000000 on node 0 almost near 4G..., and vmemmap_alloc_block will use up the ram under 4G. solution will be: 1. make memmap allocation get memory above 4G... 2. reserve some dma32 range early before we try to set up memmap for all. and release that before pci_iommu_alloc, so gart or swiotlb could get some range under 4g limit for sure. the patch is using method 2. because method1 may need more code to handle SPARSEMEM and SPASEMEM_VMEMMAP will get Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ 4000000 Memory: 264245736k/268959744k available (8484k kernel code, 4187464k reserved, 4004k data, 724k init) Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Coleman Kane 提交于
We recently got some of the "Desktop Form Factor" Optiplex 745's in. I noticed that there's an entry for the SFF one's, but the BIOS model number of the DFF differs from that of the SFF. We have been reliably experiencing the same (as far as I can tell) reboot bug as the SFF boxes. Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Randy Dunlap 提交于
Fix visws printk format warnings: /local/linsrc/linux-2.6.24-git15/arch/x86/mach-visws/traps.c:50: warning: format '%#lx' expects type 'long unsigned int', but argument 2 has type 'u32' /local/linsrc/linux-2.6.24-git15/arch/x86/mach-visws/traps.c:50: warning: format '%#lx' expects type 'long unsigned int', but argument 3 has type 'u32' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Chuck Lever 提交于
Clean up: eliminate some compiler noise on x86 when building with strict warnings enabled, introduced by commit 345b904c. In file included from include2/asm/thread_info_64.h:12, from include2/asm/thread_info.h:4, from /home/cel/src/linux/nfs-2.6/include/linux/thread_info.h:35, from /home/cel/src/linux/nfs-2.6/include/linux/preempt.h:9, from /home/cel/src/linux/nfs-2.6/include/linux/spinlock.h:49, from /home/cel/src/linux/nfs-2.6/include/linux/mmzone.h:7, from /home/cel/src/linux/nfs-2.6/include/linux/gfp.h:4, from /home/cel/src/linux/nfs-2.6/include/linux/slab.h:14, from /home/cel/src/linux/nfs-2.6/fs/nfsd/nfs4acl.c:40: include2/asm/page.h:55: warning: `inline' is not at beginning of declaration include2/asm/page.h:61: warning: `inline' is not at beginning of declaration Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Cc: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Mathieu Desnoyers 提交于
mm/slub.c: In function 'slab_alloc': mm/slub.c:1637: warning: assignment makes pointer from integer without a cast mm/slub.c:1637: warning: assignment makes pointer from integer without a cast mm/slub.c: In function 'slab_free': mm/slub.c:1796: warning: assignment makes pointer from integer without a cast mm/slub.c:1796: warning: assignment makes pointer from integer without a cast A cast is needed in the 386 and 486 code because the type is a pointer. In every other integer case the original cmpxchg code (and the cmpxchg_local which has been copied from it) worked fine, but since we touch a pointer, the type needs to be casted in the cmpxchg_local and cmpxchg macros. The more recent code (586+) does not have this problem (the cast is already there). Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Reviewed-by: NChristoph Lameter <clameter@sgi.com> Cc: Vegard Nossum <vegard.nossum@gmail.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Yinghai Lu 提交于
when numa disabled I got this compile warning: arch/x86/kernel/setup64.c: In function setup_per_cpu_areas: arch/x86/kernel/setup64.c:147: warning: the address of contig_page_data will always evaluate as true it seems we missed checking if the node is online before we try to refer NODE_DATA. Fix it. Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Yinghai Lu 提交于
memory-less node support: this patch uses updated dev_to_node, because dev_to_node already makes sure it returns an online node. Signed-off-by: NYinghai Lu <yinghai.lu@sun.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 21 3月, 2008 3 次提交
-
-
由 Heiko Carstens 提交于
Will be called each time the scheduling domains are rebuild. Needed for architectures that don't have a static cpu topology. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Heiko Carstens 提交于
Needed so it can be called from outside of sched.c. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Roel Kluin 提交于
Combine two unlikely's Signed-off-by: NRoel Kluin <12o3l@tiscali.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-