Skip to content

C
clone-Linux

gsplhtlxg / clone-Linux

通知 2
Star 0
Fork 1
C
clone-Linux

体验新版 GitCode，发现更多精彩内容 >>

切换分支/标签
  1. 15 4月, 2015 4 次提交
  3. 26 3月, 2015 3 次提交
    • M
      mm: numa: slow PTE scan rate if migration failures occur · 074c2381
      由 Mel Gorman 提交于 
      Dave Chinner reported the following on https://lkml.org/lkml/2015/3/1/226

  Across the board the 4.0-rc1 numbers are much slower, and the degradation
  is far worse when using the large memory footprint configs. Perf points
  straight at the cause - this is from 4.0-rc1 on the "-o bhash=101073" config:

   -   56.07%    56.07%  [kernel]            [k] default_send_IPI_mask_sequence_phys
      - default_send_IPI_mask_sequence_phys
         - 99.99% physflat_send_IPI_mask
            - 99.37% native_send_call_func_ipi
                 smp_call_function_many
               - native_flush_tlb_others
                  - 99.85% flush_tlb_page
                       ptep_clear_flush
                       try_to_unmap_one
                       rmap_walk
                       try_to_unmap
                       migrate_pages
                       migrate_misplaced_page
                     - handle_mm_fault
                        - 99.73% __do_page_fault
                             trace_do_page_fault
                             do_async_page_fault
                           + async_page_fault
              0.63% native_send_call_func_single_ipi
                 generic_exec_single
                 smp_call_function_single

This is showing excessive migration activity even though excessive
migrations are meant to get throttled.  Normally, the scan rate is tuned
on a per-task basis depending on the locality of faults.  However, if
migrations fail for any reason then the PTE scanner may scan faster if
the faults continue to be remote.  This means there is higher system CPU
overhead and fault trapping at exactly the time we know that migrations
cannot happen.  This patch tracks when migration failures occur and
slows the PTE scanner.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Reported-by: NDave Chinner <david@fromorbit.com>
Tested-by: NDave Chinner <david@fromorbit.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      074c2381
    • M
      mm: numa: preserve PTE write permissions across a NUMA hinting fault · b191f9b1
      由 Mel Gorman 提交于 
      Protecting a PTE to trap a NUMA hinting fault clears the writable bit
and further faults are needed after trapping a NUMA hinting fault to set
the writable bit again.  This patch preserves the writable bit when
trapping NUMA hinting faults.  The impact is obvious from the number of
minor faults trapped during the basis balancing benchmark and the system
CPU usage;

  autonumabench
                                             4.0.0-rc4             4.0.0-rc4
                                              baseline              preserve
  Time System-NUMA01                  107.13 (  0.00%)      103.13 (  3.73%)
  Time System-NUMA01_THEADLOCAL       131.87 (  0.00%)       83.30 ( 36.83%)
  Time System-NUMA02                    8.95 (  0.00%)       10.72 (-19.78%)
  Time System-NUMA02_SMT                4.57 (  0.00%)        3.99 ( 12.69%)
  Time Elapsed-NUMA01                 515.78 (  0.00%)      517.26 ( -0.29%)
  Time Elapsed-NUMA01_THEADLOCAL      384.10 (  0.00%)      384.31 ( -0.05%)
  Time Elapsed-NUMA02                  48.86 (  0.00%)       48.78 (  0.16%)
  Time Elapsed-NUMA02_SMT              47.98 (  0.00%)       48.12 ( -0.29%)

               4.0.0-rc4   4.0.0-rc4
                baseline    preserve
  User          44383.95    43971.89
  System          252.61      201.24
  Elapsed         998.68     1000.94

  Minor Faults   2597249     1981230
  Major Faults       365         364

There is a similar drop in system CPU usage using Dave Chinner's xfsrepair
workload

                                      4.0.0-rc4             4.0.0-rc4
                                       baseline              preserve
  Amean    real-xfsrepair      454.14 (  0.00%)      442.36 (  2.60%)
  Amean    syst-xfsrepair      277.20 (  0.00%)      204.68 ( 26.16%)

The patch looks hacky but the alternatives looked worse.  The tidest was
to rewalk the page tables after a hinting fault but it was more complex
than this approach and the performance was worse.  It's not generally
safe to just mark the page writable during the fault if it's a write
fault as it may have been read-only for COW so that approach was
discarded.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Reported-by: NDave Chinner <david@fromorbit.com>
Tested-by: NDave Chinner <david@fromorbit.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      b191f9b1
    • M
      mm: numa: group related processes based on VMA flags instead of page table flags · bea66fbd
      由 Mel Gorman 提交于 
      These are three follow-on patches based on the xfsrepair workload Dave
Chinner reported was problematic in 4.0-rc1 due to changes in page table
management -- https://lkml.org/lkml/2015/3/1/226.

Much of the problem was reduced by commit 53da3bc2 ("mm: fix up numa
read-only thread grouping logic") and commit ba68bc01 ("mm: thp:
Return the correct value for change_huge_pmd").  It was known that the
performance in 3.19 was still better even if is far less safe.  This
series aims to restore the performance without compromising on safety.

For the test of this mail, I'm comparing 3.19 against 4.0-rc4 and the
three patches applied on top

  autonumabench
                                                3.19.0             4.0.0-rc4             4.0.0-rc4             4.0.0-rc4             4.0.0-rc4
                                               vanilla               vanilla          vmwrite-v5r8         preserve-v5r8         slowscan-v5r8
  Time System-NUMA01                  124.00 (  0.00%)      161.86 (-30.53%)      107.13 ( 13.60%)      103.13 ( 16.83%)      145.01 (-16.94%)
  Time System-NUMA01_THEADLOCAL       115.54 (  0.00%)      107.64 (  6.84%)      131.87 (-14.13%)       83.30 ( 27.90%)       92.35 ( 20.07%)
  Time System-NUMA02                    9.35 (  0.00%)       10.44 (-11.66%)        8.95 (  4.28%)       10.72 (-14.65%)        8.16 ( 12.73%)
  Time System-NUMA02_SMT                3.87 (  0.00%)        4.63 (-19.64%)        4.57 (-18.09%)        3.99 ( -3.10%)        3.36 ( 13.18%)
  Time Elapsed-NUMA01                 570.06 (  0.00%)      567.82 (  0.39%)      515.78 (  9.52%)      517.26 (  9.26%)      543.80 (  4.61%)
  Time Elapsed-NUMA01_THEADLOCAL      393.69 (  0.00%)      384.83 (  2.25%)      384.10 (  2.44%)      384.31 (  2.38%)      380.73 (  3.29%)
  Time Elapsed-NUMA02                  49.09 (  0.00%)       49.33 ( -0.49%)       48.86 (  0.47%)       48.78 (  0.63%)       50.94 ( -3.77%)
  Time Elapsed-NUMA02_SMT              47.51 (  0.00%)       47.15 (  0.76%)       47.98 ( -0.99%)       48.12 ( -1.28%)       49.56 ( -4.31%)

                3.19.0   4.0.0-rc4   4.0.0-rc4   4.0.0-rc4   4.0.0-rc4
               vanilla     vanillavmwrite-v5r8preserve-v5r8slowscan-v5r8
  User        46334.60    46391.94    44383.95    43971.89    44372.12
  System        252.84      284.66      252.61      201.24      249.00
  Elapsed      1062.14     1050.96      998.68     1000.94     1026.78

Overall the system CPU usage is comparable and the test is naturally a
bit variable.  The slowing of the scanner hurts numa01 but on this
machine it is an adverse workload and patches that dramatically help it
often hurt absolutely everything else.

Due to patch 2, the fault activity is interesting

                                  3.19.0   4.0.0-rc4   4.0.0-rc4   4.0.0-rc4   4.0.0-rc4
                                 vanilla     vanillavmwrite-v5r8preserve-v5r8slowscan-v5r8
  Minor Faults                   2097811     2656646     2597249     1981230     1636841
  Major Faults                       362         450         365         364         365

Note the impact preserving the write bit across protection updates and
fault reduces faults.

  NUMA alloc hit                 1229008     1217015     1191660     1178322     1199681
  NUMA alloc miss                      0           0           0           0           0
  NUMA interleave hit                  0           0           0           0           0
  NUMA alloc local               1228514     1216317     1190871     1177448     1199021
  NUMA base PTE updates        245706197   240041607   238195516   244704842   115012800
  NUMA huge PMD updates           479530      468448      464868      477573      224487
  NUMA page range updates      491225557   479886983   476207932   489222218   229950144
  NUMA hint faults                659753      656503      641678      656926      294842
  NUMA hint local faults          381604      373963      360478      337585      186249
  NUMA hint local percent             57          56          56          51          63
  NUMA pages migrated            5412140     6374899     6266530     5277468     5755096
  AutoNUMA cost                    5121%       5083%       4994%       5097%       2388%

Here the impact of slowing the PTE scanner on migratrion failures is
obvious as "NUMA base PTE updates" and "NUMA huge PMD updates" are
massively reduced even though the headline performance is very similar.

As xfsrepair was the reported workload here is the impact of the series
on it.

  xfsrepair
                                         3.19.0             4.0.0-rc4             4.0.0-rc4             4.0.0-rc4             4.0.0-rc4
                                        vanilla               vanilla          vmwrite-v5r8         preserve-v5r8         slowscan-v5r8
  Min      real-fsmark        1183.29 (  0.00%)     1165.73 (  1.48%)     1152.78 (  2.58%)     1153.64 (  2.51%)     1177.62 (  0.48%)
  Min      syst-fsmark        4107.85 (  0.00%)     4027.75 (  1.95%)     3986.74 (  2.95%)     3979.16 (  3.13%)     4048.76 (  1.44%)
  Min      real-xfsrepair      441.51 (  0.00%)      463.96 ( -5.08%)      449.50 ( -1.81%)      440.08 (  0.32%)      439.87 (  0.37%)
  Min      syst-xfsrepair      195.76 (  0.00%)      278.47 (-42.25%)      262.34 (-34.01%)      203.70 ( -4.06%)      143.64 ( 26.62%)
  Amean    real-fsmark        1188.30 (  0.00%)     1177.34 (  0.92%)     1157.97 (  2.55%)     1158.21 (  2.53%)     1182.22 (  0.51%)
  Amean    syst-fsmark        4111.37 (  0.00%)     4055.70 (  1.35%)     3987.19 (  3.02%)     3998.72 (  2.74%)     4061.69 (  1.21%)
  Amean    real-xfsrepair      450.88 (  0.00%)      468.32 ( -3.87%)      454.14 ( -0.72%)      442.36 (  1.89%)      440.59 (  2.28%)
  Amean    syst-xfsrepair      199.66 (  0.00%)      290.60 (-45.55%)      277.20 (-38.84%)      204.68 ( -2.51%)      150.55 ( 24.60%)
  Stddev   real-fsmark           4.12 (  0.00%)       10.82 (-162.29%)       4.14 ( -0.28%)        5.98 (-45.05%)        4.60 (-11.53%)
  Stddev   syst-fsmark           2.63 (  0.00%)       20.32 (-671.82%)       0.37 ( 85.89%)       16.47 (-525.59%)      15.05 (-471.79%)
  Stddev   real-xfsrepair        6.87 (  0.00%)        4.55 ( 33.75%)        3.46 ( 49.58%)        1.78 ( 74.12%)        0.52 ( 92.50%)
  Stddev   syst-xfsrepair        3.02 (  0.00%)       10.30 (-241.37%)      13.17 (-336.37%)       0.71 ( 76.63%)        5.00 (-65.61%)
  CoeffVar real-fsmark           0.35 (  0.00%)        0.92 (-164.73%)       0.36 ( -2.91%)        0.52 (-48.82%)        0.39 (-12.10%)
  CoeffVar syst-fsmark           0.06 (  0.00%)        0.50 (-682.41%)       0.01 ( 85.45%)        0.41 (-543.22%)       0.37 (-478.78%)
  CoeffVar real-xfsrepair        1.52 (  0.00%)        0.97 ( 36.21%)        0.76 ( 49.94%)        0.40 ( 73.62%)        0.12 ( 92.33%)
  CoeffVar syst-xfsrepair        1.51 (  0.00%)        3.54 (-134.54%)       4.75 (-214.31%)       0.34 ( 77.20%)        3.32 (-119.63%)
  Max      real-fsmark        1193.39 (  0.00%)     1191.77 (  0.14%)     1162.90 (  2.55%)     1166.66 (  2.24%)     1188.50 (  0.41%)
  Max      syst-fsmark        4114.18 (  0.00%)     4075.45 (  0.94%)     3987.65 (  3.08%)     4019.45 (  2.30%)     4082.80 (  0.76%)
  Max      real-xfsrepair      457.80 (  0.00%)      474.60 ( -3.67%)      457.82 ( -0.00%)      444.42 (  2.92%)      441.03 (  3.66%)
  Max      syst-xfsrepair      203.11 (  0.00%)      303.65 (-49.50%)      294.35 (-44.92%)      205.33 ( -1.09%)      155.28 ( 23.55%)

The really relevant lines as syst-xfsrepair which is the system CPU
usage when running xfsrepair.  Note that on my machine the overhead was
45% higher on 4.0-rc4 which may be part of what Dave is seeing.  Once we
preserve the write bit across faults, it's only 2.51% higher on average.
With the full series applied, system CPU usage is 24.6% lower on
average.

Again, the impact of preserving the write bit on minor faults is obvious
and the impact of slowing scanning after migration failures is obvious
on the PTE updates.  Note also that the number of pages migrated is much
reduced even though the headline performance is comparable.

                                  3.19.0   4.0.0-rc4   4.0.0-rc4   4.0.0-rc4   4.0.0-rc4
                                 vanilla     vanillavmwrite-v5r8preserve-v5r8slowscan-v5r8
  Minor Faults                 153466827   254507978   249163829   153501373   105737890
  Major Faults                       610         702         690         649         724
  NUMA base PTE updates        217735049   210756527   217729596   216937111   144344993
  NUMA huge PMD updates           129294       85044      106921      127246       79887
  NUMA pages migrated           21938995    29705270    28594162    22687324    16258075

                        3.19.0   4.0.0-rc4   4.0.0-rc4   4.0.0-rc4   4.0.0-rc4
                       vanilla     vanillavmwrite-v5r8preserve-v5r8slowscan-v5r8
  Mean sdb-avgqusz       13.47        2.54        2.55        2.47        2.49
  Mean sdb-avgrqsz      202.32      140.22      139.50      139.02      138.12
  Mean sdb-await         25.92        5.09        5.33        5.02        5.22
  Mean sdb-r_await        4.71        0.19        0.83        0.51        0.11
  Mean sdb-w_await      104.13        5.21        5.38        5.05        5.32
  Mean sdb-svctm          0.59        0.13        0.14        0.13        0.14
  Mean sdb-rrqm           0.16        0.00        0.00        0.00        0.00
  Mean sdb-wrqm           3.59     1799.43     1826.84     1812.21     1785.67
  Max  sdb-avgqusz      111.06       12.13       14.05       11.66       15.60
  Max  sdb-avgrqsz      255.60      190.34      190.01      187.33      191.78
  Max  sdb-await        168.24       39.28       49.22       44.64       65.62
  Max  sdb-r_await      660.00       52.00      280.00       76.00       12.00
  Max  sdb-w_await     7804.00       39.28       49.22       44.64       65.62
  Max  sdb-svctm          4.00        2.82        2.86        1.98        2.84
  Max  sdb-rrqm           8.30        0.00        0.00        0.00        0.00
  Max  sdb-wrqm          34.20     5372.80     5278.60     5386.60     5546.15

FWIW, I also checked SPECjbb in different configurations but it's
similar observations -- minor faults lower, PTE update activity lower
and performance is roughly comparable against 3.19.

This patch (of 3):

Threads that share writable data within pages are grouped together as
related tasks.  This decision is based on whether the PTE is marked
dirty which is subject to timing races between the PTE scanner update
and when the application writes the page.  If the page is file-backed,
then background flushes and sync also affect placement.  This is
unpredictable behaviour which is impossible to reason about so this
patch makes grouping decisions based on the VMA flags.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Reported-by: NDave Chinner <david@fromorbit.com>
Tested-by: NDave Chinner <david@fromorbit.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      bea66fbd
  5. 12 3月, 2015 1 次提交
    • L
      mm: fix up numa read-only thread grouping logic · 53da3bc2
      由 Linus Torvalds 提交于 
      Dave Chinner reported that commit 4d942466 ("mm: convert
p[te|md]_mknonnuma and remaining page table manipulations") slowed down
his xfsrepair test enormously.  In particular, it was using more system
time due to extra TLB flushing.

The ultimate reason turns out to be how the change to use the regular
page table accessor functions broke the NUMA grouping logic.  The old
special mknuma/mknonnuma code accessed the page table present bit and
the magic NUMA bit directly, while the new code just changes the page
protections using PROT_NONE and the regular vma protections.

That sounds equivalent, and from a fault standpoint it really is, but a
subtle side effect is that the *other* protection bits of the page table
entries also change.  And the code to decide how to group the NUMA
entries together used the writable bit to decide whether a particular
page was likely to be shared read-only or not.

And with the change to make the NUMA handling use the regular permission
setting functions, that writable bit was basically always cleared for
private mappings due to COW.  So even if the page actually ends up being
written to in the end, the NUMA balancing would act as if it was always
shared RO.

This code is a heuristic anyway, so the fix - at least for now - is to
instead check whether the page is dirty rather than writable.  The bit
doesn't change with protection changes.

NOTE! This also adds a FIXME comment to revisit this issue,

Not only should we probably re-visit the whole "is this a shared
read-only page" heuristic (we might want to take the vma permissions
into account and base this more on those than the per-page ones, and
also look at whether the particular access that triggers it is a write
or not), but the whole COW issue shows that we should think about the
NUMA fault handling some more.

For example, maybe we should do the early-COW thing that a regular fault
does.  Or maybe we should accept that while using the same bits as
PROTNONE was a good thing (and got rid of the specual NUMA bit), we
might still want to just preseve the other protection bits across NUMA
faulting.

Those are bigger questions, left for later.  This just fixes up the
heuristic so that it at least approximates working again.  More analysis
and work needed.
Reported-by: NDave Chinner <david@fromorbit.com>
Tested-by: NMel Gorman <mgorman@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>,
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      53da3bc2
  7. 17 2月, 2015 2 次提交
    • M
      mm: allow page fault handlers to perform the COW · 2e4cdab0
      由 Matthew Wilcox 提交于 
      Currently COW of an XIP file is done by first bringing in a read-only
mapping, then retrying the fault and copying the page.  It is much more
efficient to tell the fault handler that a COW is being attempted (by
passing in the pre-allocated page in the vm_fault structure), and allow
the handler to perform the COW operation itself.

The handler cannot insert the page itself if there is already a read-only
mapping at that address, so allow the handler to return VM_FAULT_LOCKED
and set the fault_page to be NULL.  This indicates to the MM code that the
i_mmap_lock is held instead of the page lock.
Signed-off-by: NMatthew Wilcox <matthew.r.wilcox@intel.com>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      2e4cdab0
    • M
      mm: fix XIP fault vs truncate race · 283307c7
      由 Matthew Wilcox 提交于 
      DAX is a replacement for the variation of XIP currently supported by the
ext2 filesystem.  We have three different things in the tree called 'XIP',
and the new focus is on access to data rather than executables, so a name
change was in order.  DAX stands for Direct Access.  The X is for
eXciting.

The new focus on data access has resulted in more careful attention to
races that exist in the current XIP code, but are not hit by the use-case
that it was designed for.  XIP's architecture worked fine for ext2, but
DAX is architected to work with modern filsystems such as ext4 and XFS.
DAX is not intended for use with btrfs; the value that btrfs adds relies
on manipulating data and writing data to different locations, while DAX's
value is for write-in-place and keeping the kernel from touching the data.

DAX was developed in order to support NV-DIMMs, but it's become clear that
its usefuless extends beyond NV-DIMMs and there are several potential
customers including the tracing machinery.  Other people want to place the
kernel log in an area of memory, as long as they have a BIOS that does not
clear DRAM on reboot.

Patch 1 is a bug fix, probably worth including in 3.18.

Patches 2 & 3 are infrastructure for DAX.

Patches 4-8 replace the XIP code with its DAX equivalents, transforming
ext2 to use the DAX code as we go.  Note that patch 10 is the
Documentation patch.

Patches 9-15 clean up after the XIP code, removing the infrastructure
that is no longer needed and renaming various XIP things to DAX.
Most of these patches were added after Jan found things he didn't
like in an earlier version of the ext4 patch ... that had been copied
from ext2.  So ext2 i being transformed to do things the same way that
ext4 will later.  The ability to mount ext2 filesystems with the 'xip'
option is retained, although the 'dax' option is now preferred.

Patch 16 adds some DAX infrastructure to support ext4.

Patch 17 adds DAX support to ext4.  It is broadly similar to ext2's DAX
support, but it is more efficient than ext4's due to its support for
unwritten extents.

Patch 18 is another cleanup patch renaming XIP to DAX.

My thanks to Mathieu Desnoyers for his reviews of the v11 patchset.  Most
of the changes below were based on his feedback.

This patch (of 18):

Pagecache faults recheck i_size after taking the page lock to ensure that
the fault didn't race against a truncate.  We don't have a page to lock in
the XIP case, so use i_mmap_lock_read() instead.  It is locked in the
truncate path in unmap_mapping_range() after updating i_size.  So while we
hold it in the fault path, we are guaranteed that either i_size has
already been updated in the truncate path, or that the truncate will
subsequently call zap_page_range_single() and so remove the mapping we
have just inserted.

There is a window of time in which i_size has been reduced and the thread
has a mapping to a page which will be removed from the file, but this is
harmless as the page will not be allocated to a different purpose before
the thread's access to it is revoked.

[akpm@linux-foundation.org: switch to i_mmap_lock_read(), add comment in unmap_single_vma()]
Signed-off-by: NMatthew Wilcox <matthew.r.wilcox@intel.com>
Reviewed-by: NJan Kara <jack@suse.cz>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      283307c7
  9. 13 2月, 2015 5 次提交
  11. 12 2月, 2015 1 次提交
    • K
      mm: account pmd page tables to the process · dc6c9a35
      由 Kirill A. Shutemov 提交于 
      Dave noticed that unprivileged process can allocate significant amount of
memory -- >500 MiB on x86_64 -- and stay unnoticed by oom-killer and
memory cgroup.  The trick is to allocate a lot of PMD page tables.  Linux
kernel doesn't account PMD tables to the process, only PTE.

The use-cases below use few tricks to allocate a lot of PMD page tables
while keeping VmRSS and VmPTE low.  oom_score for the process will be 0.

	#include <errno.h>
	#include <stdio.h>
	#include <stdlib.h>
	#include <unistd.h>
	#include <sys/mman.h>
	#include <sys/prctl.h>

	#define PUD_SIZE (1UL << 30)
	#define PMD_SIZE (1UL << 21)

	#define NR_PUD 130000

	int main(void)
	{
		char *addr = NULL;
		unsigned long i;

		prctl(PR_SET_THP_DISABLE);
		for (i = 0; i < NR_PUD ; i++) {
			addr = mmap(addr + PUD_SIZE, PUD_SIZE, PROT_WRITE|PROT_READ,
					MAP_ANONYMOUS|MAP_PRIVATE, -1, 0);
			if (addr == MAP_FAILED) {
				perror("mmap");
				break;
			}
			*addr = 'x';
			munmap(addr, PMD_SIZE);
			mmap(addr, PMD_SIZE, PROT_WRITE|PROT_READ,
					MAP_ANONYMOUS|MAP_PRIVATE|MAP_FIXED, -1, 0);
			if (addr == MAP_FAILED)
				perror("re-mmap"), exit(1);
		}
		printf("PID %d consumed %lu KiB in PMD page tables\n",
				getpid(), i * 4096 >> 10);
		return pause();
	}

The patch addresses the issue by account PMD tables to the process the
same way we account PTE.

The main place where PMD tables is accounted is __pmd_alloc() and
free_pmd_range(). But there're few corner cases:

 - HugeTLB can share PMD page tables. The patch handles by accounting
   the table to all processes who share it.

 - x86 PAE pre-allocates few PMD tables on fork.

 - Architectures with FIRST_USER_ADDRESS > 0. We need to adjust sanity
   check on exit(2).

Accounting only happens on configuration where PMD page table's level is
present (PMD is not folded).  As with nr_ptes we use per-mm counter.  The
counter value is used to calculate baseline for badness score by
oom-killer.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: NDave Hansen <dave.hansen@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Reviewed-by: NCyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: David Rientjes <rientjes@google.com>
Tested-by: NSedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      dc6c9a35
  13. 11 2月, 2015 5 次提交
  15. 30 1月, 2015 1 次提交
    • L
      vm: make stack guard page errors return VM_FAULT_SIGSEGV rather than SIGBUS · 9c145c56
      由 Linus Torvalds 提交于 
      The stack guard page error case has long incorrectly caused a SIGBUS
rather than a SIGSEGV, but nobody actually noticed until commit
fee7e49d ("mm: propagate error from stack expansion even for guard
page") because that error case was never actually triggered in any
normal situations.

Now that we actually report the error, people noticed the wrong signal
that resulted.  So far, only the test suite of libsigsegv seems to have
actually cared, but there are real applications that use libsigsegv, so
let's not wait for any of those to break.
Reported-and-tested-by: NTakashi Iwai <tiwai@suse.de>
Tested-by: NJan Engelhardt <jengelh@inai.de>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> # "s390 still compiles and boots"
Cc: linux-arch@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      9c145c56
  17. 28 1月, 2015 1 次提交
    • D
      mm: provide a find_special_page vma operation · 667a0a06
      由 David Vrabel 提交于 
      The optional find_special_page VMA operation is used to lookup the
pages backing a VMA.  This is useful in cases where the normal
mechanisms for finding the page don't work.  This is only called if
the PTE is special.

One use case is a Xen PV guest mapping foreign pages into userspace.

In a Xen PV guest, the PTEs contain MFNs so get_user_pages() (for
example) must do an MFN to PFN (M2P) lookup before it can get the
page.  For foreign pages (those owned by another guest) the M2P lookup
returns the PFN as seen by the foreign guest (which would be
completely the wrong page for the local guest).

This cannot be fixed up improving the M2P lookup since one MFN may be
mapped onto two or more pages so getting the right page is impossible
given just the MFN.
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
Acked-by: NAndrew Morton <akpm@linux-foundation.org>
      667a0a06
  19. 13 1月, 2015 1 次提交
    • W
      mm: mmu_gather: use tlb->end != 0 only for TLB invalidation · 721c21c1
      由 Will Deacon 提交于 
      When batching up address ranges for TLB invalidation, we check tlb->end
!= 0 to indicate that some pages have actually been unmapped.

As of commit f045bbb9 ("mmu_gather: fix over-eager
tlb_flush_mmu_free() calling"), we use the same check for freeing these
pages in order to avoid a performance regression where we call
free_pages_and_swap_cache even when no pages are actually queued up.

Unfortunately, the range could have been reset (tlb->end = 0) by
tlb_end_vma, which has been shown to cause memory leaks on arm64.
Furthermore, investigation into these leaks revealed that the fullmm
case on task exit no longer invalidates the TLB, by virtue of tlb->end
 == 0 (in 3.18, need_flush would have been set).

This patch resolves the problem by reverting commit f045bbb9, using
instead tlb->local.nr as the predicate for page freeing in
tlb_flush_mmu_free and ensuring that tlb->end is initialised to a
non-zero value in the fullmm case.
Tested-by: NMark Langsdorf <mlangsdo@redhat.com>
Tested-by: NDave Hansen <dave@sr71.net>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      721c21c1
  21. 09 1月, 2015 1 次提交
    • J
      mm: protect set_page_dirty() from ongoing truncation · 2d6d7f98
      由 Johannes Weiner 提交于 
      Tejun, while reviewing the code, spotted the following race condition
between the dirtying and truncation of a page:

__set_page_dirty_nobuffers()       __delete_from_page_cache()
  if (TestSetPageDirty(page))
                                     page->mapping = NULL
				     if (PageDirty())
				       dec_zone_page_state(page, NR_FILE_DIRTY);
				       dec_bdi_stat(mapping->backing_dev_info, BDI_RECLAIMABLE);
    if (page->mapping)
      account_page_dirtied(page)
        __inc_zone_page_state(page, NR_FILE_DIRTY);
	__inc_bdi_stat(mapping->backing_dev_info, BDI_RECLAIMABLE);

which results in an imbalance of NR_FILE_DIRTY and BDI_RECLAIMABLE.

Dirtiers usually lock out truncation, either by holding the page lock
directly, or in case of zap_pte_range(), by pinning the mapcount with
the page table lock held.  The notable exception to this rule, though,
is do_wp_page(), for which this race exists.  However, do_wp_page()
already waits for a locked page to unlock before setting the dirty bit,
in order to prevent a race where clear_page_dirty() misses the page bit
in the presence of dirty ptes.  Upgrade that wait to a fully locked
set_page_dirty() to also cover the situation explained above.

Afterwards, the code in set_page_dirty() dealing with a truncation race
is no longer needed.  Remove it.
Reported-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: NJan Kara <jack@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      2d6d7f98
  23. 07 1月, 2015 1 次提交
    • L
      mm: propagate error from stack expansion even for guard page · fee7e49d
      由 Linus Torvalds 提交于 
      Jay Foad reports that the address sanitizer test (asan) sometimes gets
confused by a stack pointer that ends up being outside the stack vma
that is reported by /proc/maps.

This happens due to an interaction between RLIMIT_STACK and the guard
page: when we do the guard page check, we ignore the potential error
from the stack expansion, which effectively results in a missing guard
page, since the expected stack expansion won't have been done.

And since /proc/maps explicitly ignores the guard page (commit
d7824370: "mm: fix up some user-visible effects of the stack guard
page"), the stack pointer ends up being outside the reported stack area.

This is the minimal patch: it just propagates the error.  It also
effectively makes the guard page part of the stack limit, which in turn
measn that the actual real stack is one page less than the stack limit.

Let's see if anybody notices.  We could teach acct_stack_growth() to
allow an extra page for a grow-up/grow-down stack in the rlimit test,
but I don't want to add more complexity if it isn't needed.
Reported-and-tested-by: NJay Foad <jay.foad@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      fee7e49d
  25. 23 12月, 2014 1 次提交
  27. 19 12月, 2014 1 次提交
  29. 18 12月, 2014 2 次提交
  31. 14 12月, 2014 3 次提交
  33. 04 12月, 2014 1 次提交
    • H
      mm: fix swapoff hang after page migration and fork · 2022b4d1
      由 Hugh Dickins 提交于 
      I've been seeing swapoff hangs in recent testing: it's cycling around
trying unsuccessfully to find an mm for some remaining pages of swap.

I have been exercising swap and page migration more heavily recently,
and now notice a long-standing error in copy_one_pte(): it's trying to
add dst_mm to swapoff's mmlist when it finds a swap entry, but is doing
so even when it's a migration entry or an hwpoison entry.

Which wouldn't matter much, except it adds dst_mm next to src_mm,
assuming src_mm is already on the mmlist: which may not be so.  Then if
pages are later swapped out from dst_mm, swapoff won't be able to find
where to replace them.

There's already a !non_swap_entry() test for stats: move that up before
the swap_duplicate() and the addition to mmlist.
Signed-off-by: NHugh Dickins <hughd@google.com>
Cc: Kelley Nielsen <kelleynnn@gmail.com>
Cc: <stable@vger.kernel.org>	[2.6.18+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      2022b4d1
  35. 17 11月, 2014 1 次提交
    • W
      mmu_gather: move minimal range calculations into generic code · fb7332a9
      由 Will Deacon 提交于 
      On architectures with hardware broadcasting of TLB invalidation messages
, it makes sense to reduce the range of the mmu_gather structure when
unmapping page ranges based on the dirty address information passed to
tlb_remove_tlb_entry.

arm64 already does this by directly manipulating the start/end fields
of the gather structure, but this confuses the generic code which
does not expect these fields to change and can end up calculating
invalid, negative ranges when forcing a flush in zap_pte_range.

This patch moves the minimal range calculation out of the arm64 code
and into the generic implementation, simplifying zap_pte_range in the
process (which no longer needs to care about start/end, since they will
point to the appropriate ranges already). With the range being tracked
by core code, the need_flush flag is dropped in favour of checking that
the end of the range has actually been set.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King - ARM Linux <linux@arm.linux.org.uk>
Cc: Michal Simek <monstr@monstr.eu>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
      fb7332a9
  37. 29 10月, 2014 1 次提交
    • W
      zap_pte_range: update addr when forcing flush after TLB batching faiure · ce9ec37b
      由 Will Deacon 提交于 
      When unmapping a range of pages in zap_pte_range, the page being
unmapped is added to an mmu_gather_batch structure for asynchronous
freeing. If we run out of space in the batch structure before the range
has been completely unmapped, then we break out of the loop, force a
TLB flush and free the pages that we have batched so far. If there are
further pages to unmap, then we resume the loop where we left off.

Unfortunately, we forget to update addr when we break out of the loop,
which causes us to truncate the range being invalidated as the end
address is exclusive. When we re-enter the loop at the same address, the
page has already been freed and the pte_present test will fail, meaning
that we do not reconsider the address for invalidation.

This patch fixes the problem by incrementing addr by the PAGE_SIZE
before breaking out of the loop on batch failure.
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Cc: stable@vger.kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      ce9ec37b
  39. 27 10月, 2014 1 次提交
  41. 14 10月, 2014 1 次提交
    • P
      mm: softdirty: enable write notifications on VMAs after VM_SOFTDIRTY cleared · 64e45507
      由 Peter Feiner 提交于 
      For VMAs that don't want write notifications, PTEs created for read faults
have their write bit set.  If the read fault happens after VM_SOFTDIRTY is
cleared, then the PTE's softdirty bit will remain clear after subsequent
writes.

Here's a simple code snippet to demonstrate the bug:

  char* m = mmap(NULL, getpagesize(), PROT_READ | PROT_WRITE,
                 MAP_ANONYMOUS | MAP_SHARED, -1, 0);
  system("echo 4 > /proc/$PPID/clear_refs"); /* clear VM_SOFTDIRTY */
  assert(*m == '\0');     /* new PTE allows write access */
  assert(!soft_dirty(x));
  *m = 'x';               /* should dirty the page */
  assert(soft_dirty(x));  /* fails */

With this patch, write notifications are enabled when VM_SOFTDIRTY is
cleared.  Furthermore, to avoid unnecessary faults, write notifications
are disabled when VM_SOFTDIRTY is set.

As a side effect of enabling and disabling write notifications with
care, this patch fixes a bug in mprotect where vm_page_prot bits set by
drivers were zapped on mprotect.  An analogous bug was fixed in mmap by
commit c9d0bf24 ("mm: uncached vma support with writenotify").
Signed-off-by: NPeter Feiner <pfeiner@google.com>
Reported-by: NPeter Feiner <pfeiner@google.com>
Suggested-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Jamie Liu <jamieliu@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      64e45507
  43. 26 9月, 2014 1 次提交
  45. 14 9月, 2014 1 次提交