Commit 9b09c6d9 ("powerpc: Change the
default link address for pSeries zImage kernels") changed the
real-base value in the CHRP note added by the addnote program from
12MB to 32MB to give more space for Open Firmware to load the zImage.
(The real-base value says where we want OF to position itself in
memory.)  However, this change was ineffective on most pSeries
machines, because the RPA note added by addnote has the "ignore me"
flag set to 1.  This was intended to tell OF to ignore just the RPA
note, but has the side effect of also making OF ignore the CHRP note
(at least on most pSeries machines).

To solve this we have to set the "ignore me" flag to 0 in the RPA
note.  (We can't just omit the RPA note because that is equivalent to
having an RPA note with default values, and the default values are not
what we want.)  However, then we have to make sure the values in the
zImage's RPA note match up with the values that the kernel supplies
later in prom_init.c with either the ibm,client-architecture-support
call or the process-elf-header call in prom_send_capabilities().

So this sets the "ignore me" flag in the RPA note in addnote to 0, and
adjusts the RPA note values in addnote.c and in prom_init.c to be
consistent with each other and with the values in ibm_architecture_vec.

However, since the wrapper is independent of the kernel, this doesn't
ensure that the notes will stay consistent.  To ensure that, this adds
code to addnote.c so that it can extract the kernel's RPA note from
the kernel binary and put that in the zImage.  To that end, we put the
kernel's fake ELF header (which contains the kernel's RPA note) into
its own section, and arrange for wrapper to pull out that section with
objcopy and pass it to addnote, which then extracts the RPA note from
it and transfers it to the zImage.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Compatible property values in the form linux,<modalias> is not documented
anywhere and using it leaks Linux implementation details into the device
tree data (which is bad).  Remove support for compatible values of this
form.

If any platforms exist which depended on this code (and I don't know of
any), then they can be fixed up by adding legacy translations to the
lookup table in this file.
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The powerpc 32-bit and 64-bit kernel_thread functions don't properly
propagate errors being returned by the clone syscall.  (In the case of
error, the syscall exit code returns a positive errno in r3 and sets
the CR0[SO] bit.)

This patch fixes that by negating r3 if CR0[SO] is set after the syscall.
Signed-off-by: NJosh Poimboeuf <jpoimboe@us.ibm.com>
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Offset is unsigned and when an address isn't found in the vma map
vma_map_lookup() returns the vma physical address + 0x10000000.

vma_map_lookup used to return 0xffffffff on a failed lookup, but
a change was made to return the vma physical address + 0x10000000
There are two callers of vam_map_lookup: one of them correctly
deals with this new return value, but the other (below) did not.
Signed-off-by: NRoel Kluin <12o3l@tiscali.nl>
Acked-by: NMaynard Johnson <maynardj@us.ibm.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

When no interrupt is specified the pata_of_platform fills the irq_res
resource with -1, which is wrong to do for two reasons:

1. By definition, 'no irq' should be IRQ 0, not some negative integer;
2. pata_platform checks for irq_res.start > 0, but since irq_res.start
   is unsigned type, the check will be true for `-1'.
Reported-by: NSteven A. Falco <sfalco@harris.com>
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Testing hotplug memory remove has revealed that we can oops in
pseries_lmb_remove().  The incorrect shift causes a NULL pointer
dereference in the page_zone() inline routine.

I have only been able to reproduce the oops on kernels with large pages
enabled.

Tested on Power5 and Power6 with and without large pages enabled.
Signed-off-by: NNathan Fontenot <nfont@austin.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

When manipulating 64-bit PCI addresses, the code would lose the
top 32-bit in a couple of places when shifting a pfn due to missing
type casting from the 32-bit pfn to a 64-bit resource before the
shift.

This breaks using newer X servers for example on 440 machines
with the PCI bus above 32-bit.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

rtas_log_read() doesn't check file flags for O_NONBLOCK and blocks
non-blocking readers of /proc/ppc64/rtas/error_log when there is
no data available. This fixes it.

Also rtas_log_read() returns now with ENODATA to prevent suspending of
process in wait_event_interruptible() when logging facility was
switched off and log is already empty.
Signed-off-by: NVitaly Mayatskikh <v.mayatskih@gmail.com>
Acked-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Fix various defconfigs for Freescale chip based boards to remove
CONFIG_PPC_PMAC or CONFIG_PPC_CHRP which crept in due to those
being default y
Signed-off-by: NTimur Tabi <timur@freescale.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc uses CONFIG_FORCE_MAX_ZONEORDER, and some things depend on it
being at least 10 when 64k pages are not configured (notably the dart
iommu code with CONFIG_PM). The defaults are fine, but when going from a
64K pages config to one without 64K pages, MAX_ORDER stays at 9 which is
too low for 4K pages.

This patch makes the Kconfig enforce at least the defaults.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Acked-by: NTimur Tabi <timur@freescale.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

A bug in my initial 64-bit hibernation code breaks it when using
page sizes that aren't 4K.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The variable statindex in send_request is never read, so remove it.
Signed-off-by: NJohann Felix Soden <johfel@users.sourceforge.net>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Documentation/powerpc/smp.txt is so outdated that it makes sense to just
remove it.
Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

commit 14cf11af ("powerpc: Merge enough to
start building in arch/powerpc.") unwired /proc/ppc_htab, and commit
917f0af9 ("powerpc: Remove arch/ppc and
include/asm-ppc") removed the rest of the /proc/ppc_htab support, but there are
still a few references left. Kill them for good.
Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Commit 8b150478 ("ppc: make phys_mem_access_prot() work with pfns
instead of addresses") fixed page_is_ram() in arch/ppc to avoid overflow
for addresses above 4G on 32-bit kernels.  However arch/powerpc's
page_is_ram() is missing the same fix -- it computes a physical address
by doing pfn << PAGE_SHIFT, which overflows if pfn corresponds to a page
above 4G.

In particular this causes pages above 4G to be mapped with the wrong
caching attribute; for example many ppc440-based SoCs have PCI space
above 4G, and mmap()ing MMIO space may end up with a mapping that has
caching enabled.

Fix this by working with the pfn and avoiding the conversion to
physical address that causes the overflow.  This patch compares the
pfn to max_pfn, which is a semantic change from the old code -- that
code compared the physical address to high_memory, which corresponds
to max_low_pfn.  However, I think that was is another bug, since
highmem pages are still RAM.
Reported-by: Nvb <vb@vsbe.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Add a .gitignore in arch/powerpc/kernel to ignore the generated
vmlinux.lds.
Signed-off-by: NSebastien Dugue <sebastien.dugue@bull.net>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Add a defconfig for the AMCC Arches evaluation board
Signed-off-by: NVictor Gallardo <vgallardo@amcc.com>
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>

Basic functionality for the AMCC Arches eval Board.
Signed-off-by: NVictor Gallardo <vgallardo@amcc.com>
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>

The Arches Evaluation board is based on the AMCC 460GT SoC chip.
This board is a dual processor board with each processor providing
independent resources for Rapid IO, Gigabit Ethernet, and serial
communications.  Each 460GT has it's own 512MB DDR2 memory, 32MB NOR FLASH,
UART, EEPROM and temperature sensor, along with a shared debug port.
The two 460GT's will communicate with each other via shared memory,
Gigabit Ethernet and x1 PCI-Express.
Signed-off-by: NVictor Gallardo <vgallardo@amcc.com>
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>

Add support for the phy types found on the Arches and other
PowerPC 460 based boards.
Signed-off-by: NVictor Gallardo <vgallardo@amcc.com>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: NJeff Garzik <jeff@garzik.org>
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>

This patch allows the 4xx (conventional) PCI bridge to be disabled
via the device tree. This is needed for 4xx PCI adapter hardware.

Use the PCI node's status property to disable the PCI bridge.
Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd-electronics.com>
Acked-by: NStefan Roese <sr@denx.de>
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>

The math emulation code is centered around a set of generic macros that
provide the core of the emulation that are shared by the various
architectures and other projects (like glibc).  Each arch implements its
own sfp-machine.h to specific various arch specific details.

For historic reasons that are now lost the powerpc math-emu code had
its own version of the common headers.  This moves us to using the
kernel generic version and thus getting fixes when those are updated.

Also cleaned up exception/error reporting from the FP emulation functions.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

The PowerPC 405EZ SoC has some differences in the interrupt layout and
handling for the MAL.  The SERR, TXDE, and RXDE interrupts are OR'd into
a single interrupt.  Also, due to the possibility for interrupt coalescing,
the TXEOB and RXEOB interrupts require an interrupt bit to be cleared in
the ICINTSTAT SDR.

This sets the proper MAL feature bits for 405EZ boards, and adds a common
shared handler for SERR, TXDE, and RXDE.  The defines for the ICINTSTAT DCR
are added to the proper header file as well.

This has been adapted from code originally written by Stefan Roese.
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: NJeff Garzik <jeff@garzik.org>
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>

There are some PowerPC SoCs that do odd things with the MAL handling.  In
order to accommodate them, we need to introduce a feature mechanism that is
similar to the existing emac_has_feature function.

This adds a feature variable to the mal_instance structure, and adds a
mal_has_feature function.  Two features are defined and are guarded
by Kconfig options that are selected by the affected platforms.

MAL_FTR_CLEAR_ICINSTAT is used for platforms that need to clear the
interrupt bits in the ICINTSTAT SDR for txeob/rxeob.  This is common
on MAL implementations that have interrupt coalescing.

MAL_FTR_COMMON_ERR_INT is used for platforms that have SERR, TXDE,
and RXDE OR'd into a single interrupt bit.
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: NJeff Garzik <jeff@garzik.org>
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>

Some PowerPC 40x chips have errata that force us not to use the integrated
flow control.  We have the feature defined, but it currently can't be used
because it is never added to EMAC_FTRS_POSSIBLE.

This adds a Kconfig option for affected platforms to select and puts the
feature in the EMAC_FTRS_POSSIBLE list.  This is set for PowerPC 405EZ
platforms as well.
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: NJeff Garzik <jeff@garzik.org>
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>

Support for the SBC610 VPX Single Board Computer from GE Fanuc (PowerPC
MPC8641D).

Fixup to correctly reconfigure USB, provided by an NEC uPD720101, after
device is reset. This requires a set of chip specific registers in the
devices configuration space to be correctly written, enabling all ports
and switching the device to use an external 48-MHz Oscillator.
Signed-off-by: NMartyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

For many of the embedded boards, "model" and "Machine" are printing
the same thing; remove the redundant code and allow the generic
show_cpuinfo to print the model information.
Signed-off-by: NBecky Bruce <becky.bruce@freescale.com>
Acked-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: NMartyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

mpc83xx_wdt is the OF driver now, so we don't need fsl_soc constructor.
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Now that arch/ppc is gone we don't need CONFIG_PPC_MERGE anymore
remove the dead code associated with !CONFIG_PPC_MERGE.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

This rearranges a bit of code, and adds support for
36-bit physical addressing for configs that use a
hashed page table.  The 36b physical support is not
enabled by default on any config - it must be
explicitly enabled via the config system.

This patch *only* expands the page table code to accomodate
large physical addresses on 32-bit systems and enables the
PHYS_64BIT config option for 86xx.  It does *not*
allow you to boot a board with more than about 3.5GB of
RAM - for that, SWIOTLB support is also required (and
coming soon).
Signed-off-by: NBecky Bruce <becky.bruce@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Implement _PAGE_SPECIAL and pte_special() for 32-bit powerpc. This bit will
be used by the fast get_user_pages() to differenciate PTEs that correspond
to a valid struct page from special mappings that don't such as IO mappings
obtained via io_remap_pfn_ranges().

We currently only implement this on sub-arch that support SMP or will so
in the future (6xx, 44x, FSL-BookE) and not (8xx, 40x).
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

There are some minor issues with support 64-bit PTEs on a 32-bit processor
when dealing with SMP.

* We need to order the stores in set_pte_at to make sure the flag word
  is set second.
* Change pte_clear to use pte_update so only the flag word is cleared
* Added a WARN_ON to set_pte_at to ensure the pte isn't present for
  the 64-bit pte/SMP case (to ensure our assumption of this fact).
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
Acked-by: NBecky Bruce <becky.bruce@freescale.com>

Introduced a new set of low level tlb invalidate functions that do not
broadcast invalidates on the bus:

_tlbil_all - invalidate all
_tlbil_pid - invalidate based on process id (or mm context)
_tlbil_va  - invalidate based on virtual address (ea + pid)

On non-SMP configs _tlbil_all should be functionally equivalent to _tlbia and
_tlbil_va should be functionally equivalent to _tlbie.

The intent of this change is to handle SMP based invalidates via IPIs instead
of broadcasts as the mechanism scales better for larger number of cores.

On e500 (fsl-booke mmu) based cores move to using MMUCSR for invalidate alls
and tlbsx/tlbwe for invalidate virtual address.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Signed-off-by: NBecky Bruce <becky.bruce@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

We essentially adopt the 64-bit dma code, with some changes to support
32-bit systems, including HIGHMEM.  dma functions on 32-bit are now
invoked via accessor functions which call the correct op for a device based
on archdata dma_ops.  If there is no archdata dma_ops, this defaults
to dma_direct_ops.

In addition, the dma_map/unmap_page functions are added to dma_ops
because we can't just fall back on map/unmap_single when HIGHMEM is
enabled. In the case of dma_direct_*, we stop using map/unmap_single
and just use the page version - this saves a lot of ugly
ifdeffing.  We leave map/unmap_single in the dma_ops definition,
though, because they are needed by the iommu code, which does not
implement map/unmap_page.  Ideally, going forward, we will completely
eliminate map/unmap_single and just have map/unmap_page, if it's
workable for 64-bit.
Signed-off-by: NBecky Bruce <becky.bruce@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Use the struct device's numa_node instead; use accessor functions
to get/set numa_node.
Signed-off-by: NBecky Bruce <becky.bruce@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

32-bit platforms are about to start using dma.c; move the iommu
dma ops into their own file to make this a bit cleaner.
Signed-off-by: NBecky Bruce <becky.bruce@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>