- 05 2月, 2006 23 次提交
-
-
由 Jan Beulich 提交于
Conditionalize two unwind directives to match other similarly conditional code. Signed-Off-By: NJan Beulich <jbeulich@novell.com> Cc: Jim Houston <jim.houston@ccur.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
On some broken motherboards (at least one NForce3 based AMD64 laptop) the PIT timer runs at a incorrect frequency. This patch adds a new option "apicpmtimer" that allows to use the APIC timer and calibrate it using the PMTimer. It requires the earlier patch that allows to run the main timer from the APIC. Specifying apicpmtimer implies apicmaintimer. The option defaults to off for now. I tested it on a few systems and the resulting APIC timer frequencies were usually a bit off, but always <1%, which should be tolerable. TBD figure out heuristic to enable this automatically on the affected systems TBD perhaps do it on all NForce3s or using DMI? Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
kprobes cannot deal with the funny calling conventions when it runs on a different stack when it returns. If someone wants to instrument context switch they can add a probe to schedule() instead. Cc: jkenisto@us.ibm.com, prasanna@in.ibm.com Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Zach Brown 提交于
Align the start of the per-cpu section to the configured number of bytes in a cache line. This stops a BUG_ON() from triggering in load_module() when DEFINE_PER_CPU() is used in a module and the section isn't cacheline-aligned. Rusty also found this and sent a patch in a while ago (http://lkml.org/lkml/2004/10/19/17), I don't know what came of that. Signed-off-by: NZach Brown <zach.brown@oracle.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Kevin VanMaren 提交于
[ AK: I redid Kevin's fix to be simpler, but the idea and original analysis of the problem is from Kevin] This avoid allocation failures on some SATA systems like Nvidia CK8 when the IOMMU gets fragmented. Modern SATA devices have quite large queues (128 entries) and the FS with ext2/3 is good enough now that it often passes whole 128 page sg lists down to the driver. These require 512K of continuous free space in the IOMMU aperture to map when merged. When the IOMMU is fragmented this could lead to spurious IO errors due to failing mappings. Short term fix is to just try to map the SG list again unmerged page by page - this way fragmentation doesn't matter anymore. The code for that was already there, but it just wasn't enabled for the merge case. According to Kevin at least the Nvidia device doesn't seem to benefit from merging much anyways, so the only slowdown is from trying to do an unnecessary merge attempt. Kevin plans to implement better fragmentation avoidance in the future, but that wouldn't be 2.6.16 material. TBD: should add some statistic counters to count how often that really happens. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
I broke this earlier when moving the patch from i386 to x86-64. Need to return the virtual address here, not the physical address. This fixes some boot time crashes on x86-64. Cc: gregkh@suse.de Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
- Check if the processor/memory affinity entries are long enough according to the ACPI 3.0 spec. - Ignore memory affinity entries that define a zero length region. All based on BIOS issues found in the field @) Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ashok Raj 提交于
attached patch is 2 more cases i found via running the reference_init.pl script. These were easy to spot just knowing the file names. There is one another about init/main.c that i cant exactly zero in. (partly because i dont know how to interpret the data thats spewed out of the tool). Signed-off-by: NAshok Raj <ashok.raj@intel.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Shaohua Li 提交于
SIgned-off-by: Shaohua Li<shaohua.li@intel.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
Might fix boot failures on systems with empty PXMs in SRAT Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Chen, Kenneth W 提交于
> mm/mempolicy.c: In function `huge_zonelist': > mm/mempolicy.c:1045: error: `HPAGE_SHIFT' undeclared (first use in this function) > mm/mempolicy.c:1045: error: (Each undeclared identifier is reported only once > mm/mempolicy.c:1045: error: for each function it appears in.) > make[1]: *** [mm/mempolicy.o] Error 1 Need to wrap huge_zonelist function with CONFIG_HUGETLBFS. Signed-off-by: NKen Chen <kenneth.w.chen@intel.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
It has been enabled by default for some time now and is cheap enough so it doesn't matter anyways. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ravikiran G Thirumalai 提交于
Currently, x86_64 and ia64 arches do not clear the corresponding bits in the node's cpumask when a cpu goes down or cpu bring up is cancelled. This is buggy since there are pieces of common code where the cpumask is checked in the cpu down code path to decide on things (like in the slab down path). PPC does the right thing, but x86_64 and ia64 don't (This was the reason Sonny hit upon a slab bug during cpu offline on ppc and could not reproduce on other arches). This patch fixes it for x86_64. I won't attempt ia64 as I cannot test it. Credit for spotting this should go to Alok. Signed-off-by: NAlok N Kataria <alokk@calsoftinc.com> Signed-off-by: NRavikiran Thirumalai <kiran@scalex86.org> Signed-off-by: NShai Fultheim <shai@scalex86.org> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
They cause quite bad performance regressions on Netburst This is temporary until we can get new optimized functions for these CPUs. This undoes changes that were done in 2.6.15 and in 2.6.16-rc1, essentially bringing the code back to 2.6.14 level. Only change is I renamed the X86_FEATURE_K8_C flag to X86_FEATURE_REP_GOOD and fixed the check for the flag and also fixed some comments. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
This avoids BUG_ONs in the low level allocator when an illegal GFP mask is added. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Shaohua Li 提交于
At resume time, TSC's value or something similar might be changed a lot against suspend time. This could make system gets a very big lost ticks. See http://bugzilla.kernel.org/show_bug.cgi?id=5825 Signed-off-by: Shaohua Li<shaohua.li@intel.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
They all have problems with IRQ 0 routing, so just use the APIC on them. Can be overwritten with "noapicmaintimer" Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
Another piece from the no-idle-tick patch. This can be enabled with the "apicmaintimer" option. This is mainly useful when the PIT/HPET interrupt is unreliable. Note there are some systems that are known to stop the APIC timer in C3. For those it will never work, but this case should be automatically detected. It also only works with PM timer right now. When HPET is used the way the main timer handler computes the delay doesn't work. It should be a bit more efficient because there is one less regular interrupt to process on the boot processor. Requires earlier bugfix from Venkatesh Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Venkatesh Pallipadi 提交于
Bug in apic timer removal on C3 patch. We should switch to IPI from APIC timer only when C3 state is valid. Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
Avoids some ifdef mess later. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
A kprobe executes IRET early and that could cause NMI recursion and stack corruption. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 04 2月, 2006 17 次提交
-
-
由 Stephen Smalley 提交于
Remove private inode tests from security_inode_alloc and security_inode_free, as we otherwise end up leaking inode security structures for private inodes. Signed-off-by: NStephen Smalley <sds@tycho.nsa.gov> Acked-by: NJames Morris <jmorris@namei.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
-
-
由 Russell King 提交于
ARCH_CAMELOT (excalibur) got removed; remove it from the AT91 defconfigs Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Prevent SERIAL_8250_RUNTIME_UARTS being larger than SERIAL_8250_NR_UARTS. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Mark Fasheh 提交于
The mount path had incorrectly asked the locking code to wait for recovery completion, which deadlocks things because recovery waits for mount to complete first. Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
this changes if() BUG(); constructs to BUG_ON() which is cleaner, contains unlikely() and can better optimized away. Signed-off-by: NEric Sesterhenn <snakebyte@gmx.de> Signed-off-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Joel Becker 提交于
configfs always made item and attribute ownership root.root and permissions based on a umask of 022. Add ->setattr() to allow chown(2)/chmod(2), and persist the changes for the lifetime of the items and attributes. Signed-off-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Joel Becker 提交于
Signed-off-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Mark Fasheh 提交于
Fix a couple of compile warnings found when compiling on a ppc64 build box. Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
this changes if() BUG(); constructs to BUG_ON() which is cleaner, contains unlikely() and can better optimized away. Signed-off-by: NEric Sesterhenn <snakebyte@gmx.de> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Adrian Bunk 提交于
fs/ocfs2/dlm/dlmrecovery.c does now use msleep(), and does therefore need to #include <linux/delay.h> for getting the prototype of this function. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Arjan van de Ven 提交于
Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: NArjan van de Ven <arjan@infradead.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Kurt Hackel 提交于
* fix a hang which can occur during shutdown migration * do not allow nodes to join during recovery * when restarting lock mastery, do not ignore nodes which come up * more than one node could become recovery master, fix this * sleep to allow some time for heartbeat state to catch up to network * extra debug info for bad recovery state problems * make DLM_RECO_NODE_DATA_DONE a valid state for non-master recovery nodes * prune all locks from dead nodes on $RECOVERY lock resources * do NOT automatically add new nodes to mle nodemaps until they have properly joined the domain * make sure dlm_pick_recovery_master only exits when all nodes have synced * properly handle dlmunlock errors in dlm_pick_recovery_master * do not propagate network errors in dlm_send_begin_reco_message * dead nodes were not being put in the recovery map sometimes, fix this * dlmunlock was failing to clear the unlock actions on DLM_DENIED Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-