- 11 4月, 2019 1 次提交
-
-
由 Christoph Hellwig 提交于
Now that we allow drivers to always need to set larger than required DMA masks we need to be a little more careful in the sun4v PCI iommu driver to chose when to select the ATU support - a larger DMA mask can be set even when the platform does not support ATU, so we always have to check if it is avaiable before using it. Add a little helper for that and use it in all the places where we make ATU usage decisions based on the DMA mask. Fixes: 24132a41 ("sparc64/pci_sun4v: allow large DMA masks") Reported-by: NMeelis Roos <mroos@linux.ee> Signed-off-by: NChristoph Hellwig <hch@lst.de> Tested-by: NMeelis Roos <mroos@linux.ee> Acked-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 4月, 2019 4 次提交
-
-
由 Arnd Bergmann 提交于
When HOTPLUG_CPU is disabled, some fields in the smp operations are not available or needed: arch/arm/mach-milbeaut/platsmp.c:90:3: error: field designator 'cpu_die' does not refer to any field in type 'struct smp_operations' .cpu_die = m10v_cpu_die, ^ arch/arm/mach-milbeaut/platsmp.c:91:3: error: field designator 'cpu_kill' does not refer to any field in type 'struct smp_operations' .cpu_kill = m10v_cpu_kill, ^ Hide them in an #ifdef like the other platforms do. Fixes: 9fb29c73 ("ARM: milbeaut: Add basic support for Milbeaut m10v SoC") Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Arnd Bergmann 提交于
clang warns about statically defined DMA masks from the DMA_BIT_MASK macro with length 64: arch/arm/mach-iop13xx/setup.c:303:35: error: shift count >= width of type [-Werror,-Wshift-count-overflow] static u64 iop13xx_adma_dmamask = DMA_BIT_MASK(64); ^~~~~~~~~~~~~~~~ include/linux/dma-mapping.h:141:54: note: expanded from macro 'DMA_BIT_MASK' #define DMA_BIT_MASK(n) (((n) == 64) ? ~0ULL : ((1ULL<<(n))-1)) ^ ~~~ The ones in iop shouldn't really be 64 bit masks, so changing them to what the driver can support avoids the warning. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Arnd Bergmann 提交于
clang warns about statically defined DMA masks from the DMA_BIT_MASK macro with length 64: arch/arm/plat-orion/common.c:625:29: error: shift count >= width of type [-Werror,-Wshift-count-overflow] .coherent_dma_mask = DMA_BIT_MASK(64), ^~~~~~~~~~~~~~~~ include/linux/dma-mapping.h:141:54: note: expanded from macro 'DMA_BIT_MASK' #define DMA_BIT_MASK(n) (((n) == 64) ? ~0ULL : ((1ULL<<(n))-1)) The ones in orion shouldn't really be 64 bit masks, so changing them to what the driver can support avoids the warning. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Olof Johansson 提交于
This reverts commit fa946356. Per Linus Walleij: Dear ARM SoC maintainers, can you please revert this patch. It was the wrong solution to the wrong problem, and I must have acted in stress. Andrey fixed the real bug in a proper way in these commits: commit e5545c94 "gpio: of: Check propname before applying "cs-gpios" quirks" commit 7ce40277 "gpio: of: Check for "spi-cs-high" in child instead of parent node" Signed-off-by: NOlof Johansson <olof@lixom.net>
-
- 07 4月, 2019 3 次提交
-
-
由 Helge Deller 提交于
While adding LASI support to QEMU, I noticed that the QEMU detection in the kernel happens much too late. For example, when a LASI chip is found by the kernel, it registers the LASI LED driver as well. But when we run on QEMU it makes sense to avoid spending unnecessary CPU cycles, so we need to access the running_on_QEMU flag earlier than before. This patch now makes the QEMU detection the fist task of the Linux kernel by moving it to where the kernel enters the C-coding. Fixes: 310d8278 ("parisc: qemu idle sleep support") Signed-off-by: NHelge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # v4.14+
-
由 Sven Schnelle 提交于
When setting the instruction pointer on PA-RISC we also need to set the back of the instruction queue to the new offset, otherwise we will execute on instruction from the new location, and jumping back to the old location stored in iaoq_b. Signed-off-by: NSven Schnelle <svens@stackframe.org> Signed-off-by: NHelge Deller <deller@gmx.de> Fixes: 75ebedf1 ("parisc: Add HAVE_REGS_AND_STACK_ACCESS_API feature") Cc: stable@vger.kernel.org # 4.19+
-
由 Sven Schnelle 提交于
While working on kretprobes for PA-RISC I was wondering while the kprobes sanity test always fails on kretprobes. This is caused by returning gpr20 instead of gpr28. Signed-off-by: NSven Schnelle <svens@stackframe.org> Signed-off-by: NHelge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # 4.14+
-
- 06 4月, 2019 6 次提交
-
-
由 Randy Dunlap 提交于
Many of the sh CPU-types have their own plat_irq_setup() and arch_init_clk_ops() functions, so these same (empty) functions in arch/sh/boards/of-generic.c are not needed and cause build errors. If there is some case where these empty functions are needed, they can be retained by marking them as "__weak" while at the same time making builds that do not need them succeed. Fixes these build errors: arch/sh/boards/of-generic.o: In function `plat_irq_setup': (.init.text+0x134): multiple definition of `plat_irq_setup' arch/sh/kernel/cpu/sh2/setup-sh7619.o:(.init.text+0x30): first defined here arch/sh/boards/of-generic.o: In function `arch_init_clk_ops': (.init.text+0x118): multiple definition of `arch_init_clk_ops' arch/sh/kernel/cpu/sh2/clock-sh7619.o:(.init.text+0x0): first defined here Link: http://lkml.kernel.org/r/9ee4e0c5-f100-86a2-bd4d-1d3287ceab31@infradead.orgSigned-off-by: NRandy Dunlap <rdunlap@infradead.org> Reported-by: Nkbuild test robot <lkp@intel.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Catalin Marinas 提交于
Commit 2d4f5671 ("KVM: PPC: Introduce kvm_tmp framework") adds kvm_tmp[] into the .bss section and then free the rest of unused spaces back to the page allocator. kernel_init kvm_guest_init kvm_free_tmp free_reserved_area free_unref_page free_unref_page_prepare With DEBUG_PAGEALLOC=y, it will unmap those pages from kernel. As the result, kmemleak scan will trigger a panic when it scans the .bss section with unmapped pages. This patch creates dedicated kmemleak objects for the .data, .bss and potentially .data..ro_after_init sections to allow partial freeing via the kmemleak_free_part() in the powerpc kvm_free_tmp() function. Link: http://lkml.kernel.org/r/20190321171917.62049-1-catalin.marinas@arm.comSigned-off-by: NCatalin Marinas <catalin.marinas@arm.com> Reported-by: NQian Cai <cai@lca.pw> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Tested-by: NQian Cai <cai@lca.pw> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Avi Kivity <avi@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krcmar <rkrcmar@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Marc Orr 提交于
Referring to the "VIRTUALIZING MSR-BASED APIC ACCESSES" chapter of the SDM, when "virtualize x2APIC mode" is 1 and "APIC-register virtualization" is 0, a RDMSR of 808H should return the VTPR from the virtual APIC page. However, for nested, KVM currently fails to disable the read intercept for this MSR. This means that a RDMSR exit takes precedence over "virtualize x2APIC mode", and KVM passes through L1's TPR to L2, instead of sourcing the value from L2's virtual APIC page. This patch fixes the issue by disabling the read intercept, in VMCS02, for the VTPR when "APIC-register virtualization" is 0. The issue described above and fix prescribed here, were verified with a related patch in kvm-unit-tests titled "Test VMX's virtualize x2APIC mode w/ nested". Signed-off-by: NMarc Orr <marcorr@google.com> Reviewed-by: NJim Mattson <jmattson@google.com> Fixes: c992384b ("KVM: vmx: speed up MSR bitmap merge") Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Marc Orr 提交于
The nested_vmx_prepare_msr_bitmap() function doesn't directly guard the x2APIC MSR intercepts with the "virtualize x2APIC mode" MSR. As a result, we discovered the potential for a buggy or malicious L1 to get access to L0's x2APIC MSRs, via an L2, as follows. 1. L1 executes WRMSR(IA32_SPEC_CTRL, 1). This causes the spec_ctrl variable, in nested_vmx_prepare_msr_bitmap() to become true. 2. L1 disables "virtualize x2APIC mode" in VMCS12. 3. L1 enables "APIC-register virtualization" in VMCS12. Now, KVM will set VMCS02's x2APIC MSR intercepts from VMCS12, and then set "virtualize x2APIC mode" to 0 in VMCS02. Oops. This patch closes the leak by explicitly guarding VMCS02's x2APIC MSR intercepts with VMCS12's "virtualize x2APIC mode" control. The scenario outlined above and fix prescribed here, were verified with a related patch in kvm-unit-tests titled "Add leak scenario to virt_x2apic_mode_test". Note, it looks like this issue may have been introduced inadvertently during a merge---see 15303ba5. Signed-off-by: NMarc Orr <marcorr@google.com> Reviewed-by: NJim Mattson <jmattson@google.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 David Rientjes 提交于
This ensures that the address and length provided to DBG_DECRYPT and DBG_ENCRYPT do not cause an overflow. At the same time, pass the actual number of pages pinned in memory to sev_unpin_memory() as a cleanup. Reported-by: NCfir Cohen <cfir@google.com> Signed-off-by: NDavid Rientjes <rientjes@google.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 David Rientjes 提交于
get_num_contig_pages() could potentially overflow int so make its type consistent with its usage. Reported-by: NCfir Cohen <cfir@google.com> Cc: stable@vger.kernel.org Signed-off-by: NDavid Rientjes <rientjes@google.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 05 4月, 2019 6 次提交
-
-
由 Steven Rostedt (VMware) 提交于
After removing the start and count arguments of syscall_get_arguments() it seems reasonable to remove them from syscall_set_arguments(). Note, as of today, there are no users of syscall_set_arguments(). But we are told that there will be soon. But for now, at least make it consistent with syscall_get_arguments(). Link: http://lkml.kernel.org/r/20190327222014.GA32540@altlinux.org Cc: Oleg Nesterov <oleg@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Dave Martin <dave.martin@arm.com> Cc: "Dmitry V. Levin" <ldv@altlinux.org> Cc: x86@kernel.org Cc: linux-snps-arc@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-c6x-dev@linux-c6x.org Cc: uclinux-h8-devel@lists.sourceforge.jp Cc: linux-hexagon@vger.kernel.org Cc: linux-ia64@vger.kernel.org Cc: linux-mips@vger.kernel.org Cc: nios2-dev@lists.rocketboards.org Cc: openrisc@lists.librecores.org Cc: linux-parisc@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-riscv@lists.infradead.org Cc: linux-s390@vger.kernel.org Cc: linux-sh@vger.kernel.org Cc: sparclinux@vger.kernel.org Cc: linux-um@lists.infradead.org Cc: linux-xtensa@linux-xtensa.org Cc: linux-arch@vger.kernel.org Acked-by: Max Filippov <jcmvbkbc@gmail.com> # For xtensa changes Acked-by: Will Deacon <will.deacon@arm.com> # For the arm64 bits Reviewed-by: Thomas Gleixner <tglx@linutronix.de> # for x86 Reviewed-by: NDmitry V. Levin <ldv@altlinux.org> Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
-
由 Steven Rostedt (Red Hat) 提交于
At Linux Plumbers, Andy Lutomirski approached me and pointed out that the function call syscall_get_arguments() implemented in x86 was horribly written and not optimized for the standard case of passing in 0 and 6 for the starting index and the number of system calls to get. When looking at all the users of this function, I discovered that all instances pass in only 0 and 6 for these arguments. Instead of having this function handle different cases that are never used, simply rewrite it to return the first 6 arguments of a system call. This should help out the performance of tracing system calls by ptrace, ftrace and perf. Link: http://lkml.kernel.org/r/20161107213233.754809394@goodmis.org Cc: Oleg Nesterov <oleg@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Dave Martin <dave.martin@arm.com> Cc: "Dmitry V. Levin" <ldv@altlinux.org> Cc: x86@kernel.org Cc: linux-snps-arc@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-c6x-dev@linux-c6x.org Cc: uclinux-h8-devel@lists.sourceforge.jp Cc: linux-hexagon@vger.kernel.org Cc: linux-ia64@vger.kernel.org Cc: linux-mips@vger.kernel.org Cc: nios2-dev@lists.rocketboards.org Cc: openrisc@lists.librecores.org Cc: linux-parisc@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-riscv@lists.infradead.org Cc: linux-s390@vger.kernel.org Cc: linux-sh@vger.kernel.org Cc: sparclinux@vger.kernel.org Cc: linux-um@lists.infradead.org Cc: linux-xtensa@linux-xtensa.org Cc: linux-arch@vger.kernel.org Acked-by: Paul Burton <paul.burton@mips.com> # MIPS parts Acked-by: Max Filippov <jcmvbkbc@gmail.com> # For xtensa changes Acked-by: Will Deacon <will.deacon@arm.com> # For the arm64 bits Reviewed-by: Thomas Gleixner <tglx@linutronix.de> # for x86 Reviewed-by: NDmitry V. Levin <ldv@altlinux.org> Reported-by: NAndy Lutomirski <luto@amacapital.net> Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
-
由 Dan Carpenter 提交于
The "call" variable comes from the user in privcmd_ioctl_hypercall(). It's an offset into the hypercall_page[] which has (PAGE_SIZE / 32) elements. We need to put an upper bound on it to prevent an out of bounds access. Cc: stable@vger.kernel.org Fixes: 1246ae0b ("xen: add variable hypercall caller") Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Reviewed-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: NJuergen Gross <jgross@suse.com>
-
由 Max Filippov 提交于
Use %lu instead of %zu to fix the following warning introduced with recent memblock refactoring: xtensa/mm/mmu.c:36:9: warning: format '%zu' expects argument of type 'size_t', but argument 3 has type 'long unsigned int Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
-
由 Max Filippov 提交于
return_address returns the address that is one level higher in the call stack than requested in its argument, because level 0 corresponds to its caller's return address. Use requested level as the number of stack frames to skip. This fixes the address reported by might_sleep and friends. Cc: stable@vger.kernel.org Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
-
由 Horatiu Vultur 提交于
Some of the configuration were not selected by default anymore, therefore enable them again. Also remove some configs which are used for MSCC Ocelot. Signed-off-by: NHoratiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: NPaul Burton <paul.burton@mips.com> Cc: <alexandre.belloni@bootlin.com> Cc: <UNGLinuxDriver@microchip.com> Cc: <ralf@linux-mips.org> Cc: <jhogan@kernel.org> Cc: <linux-mips@vger.kernel.org> Cc: <linux-kernel@vger.kernel.org>
-
- 04 4月, 2019 6 次提交
-
-
由 Wei Li 提交于
When doing unwind_frame() in the context of pseudo nmi (need enable CONFIG_ARM64_PSEUDO_NMI), reaching the bottom of the stack (fp == 0, pc != 0), function on_sdei_stack() will return true while the sdei acpi table is not inited in fact. This will cause a "NULL pointer dereference" oops when going on. Reviewed-by: NJulien Thierry <julien.thierry@arm.com> Signed-off-by: NWei Li <liwei391@huawei.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Dmitry V. Levin 提交于
C-SKY syscall arguments are located in orig_a0,a1,a2,a3,regs[0],regs[1] fields of struct pt_regs. Due to an off-by-one bug and a bug in pointer arithmetic syscall_get_arguments() was reading orig_a0,regs[1..5] fields instead. Likewise, syscall_set_arguments() was writing orig_a0,regs[1..5] fields instead. Link: http://lkml.kernel.org/r/20190329171230.GB32456@altlinux.org Fixes: 4859bfca ("csky: System Call") Cc: Ingo Molnar <mingo@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Will Drewry <wad@chromium.org> Cc: stable@vger.kernel.org # v4.20+ Tested-by: NGuo Ren <ren_guo@c-sky.com> Acked-by: NGuo Ren <ren_guo@c-sky.com> Signed-off-by: NDmitry V. Levin <ldv@altlinux.org> Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
-
由 Dmitry V. Levin 提交于
RISC-V syscall arguments are located in orig_a0,a1..a5 fields of struct pt_regs. Due to an off-by-one bug and a bug in pointer arithmetic syscall_get_arguments() was reading s3..s7 fields instead of a1..a5. Likewise, syscall_set_arguments() was writing s3..s7 fields instead of a1..a5. Link: http://lkml.kernel.org/r/20190329171221.GA32456@altlinux.org Fixes: e2c0cdfb ("RISC-V: User-facing API") Cc: Ingo Molnar <mingo@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Will Drewry <wad@chromium.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: linux-riscv@lists.infradead.org Cc: stable@vger.kernel.org # v4.15+ Acked-by: NPalmer Dabbelt <palmer@sifive.com> Signed-off-by: NDmitry V. Levin <ldv@altlinux.org> Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
-
由 Peng Hao 提交于
of_find_device_by_node() takes a reference to the struct device when it finds a match via get_device. When returning error we should call put_device. Reviewed-by: NMukesh Ojha <mojha@codeaurora.org> Signed-off-by: NPeng Hao <peng.hao2@zte.com.cn> Signed-off-by: NLudovic Desroches <ludovic.desroches@microchip.com>
-
由 Max Filippov 提交于
New pt_regs should indicate that there's no syscall, not that there's syscall #0. While at it wrap macro body in do/while and parenthesize macro arguments. Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
-
由 Max Filippov 提交于
Syscall may alter pt_regs structure passed to it, resulting in a mismatch between syscall entry end syscall exit entries in the ftrace. Temporary restore syscall field of the pt_regs for the duration of do_syscall_trace_leave. Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
-
- 29 3月, 2019 14 次提交
-
-
由 Matteo Croce 提交于
Remove the unused @size argument and move it into a header file, so it can be inlined. [ bp: Massage. ] Signed-off-by: NMatteo Croce <mcroce@redhat.com> Signed-off-by: NBorislav Petkov <bp@suse.de> Reviewed-by: NMukesh Ojha <mojha@codeaurora.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: linux-efi <linux-efi@vger.kernel.org> Cc: platform-driver-x86@vger.kernel.org Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20190328114233.27835-1-mcroce@redhat.com
-
由 Joe Perches 提交于
IS_ENABLED should generally use CONFIG_ prefaced symbols and it doesn't appear as if there is a CMODEL_MEDLOW define. Signed-off-by: NJoe Perches <joe@perches.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NPalmer Dabbelt <palmer@sifive.com>
-
由 Anup Patel 提交于
The FIXMAP area overlaps with VMALLOC area in Linux-5.1-rc1 hence we get below warning in Linux RISC-V 32bit kernel. This warning does not show-up in Linux RISC-V 64bit kernel due to large VMALLOC area. WARNING: CPU: 0 PID: 22 at mm/vmalloc.c:150 vmap_page_range_noflush+0x134/0x15c Modules linked in: CPU: 0 PID: 22 Comm: kworker/0:1 Not tainted 5.1.0-rc1-00005-gebc2f658040e #1 Workqueue: events pcpu_balance_workfn Call Trace: [<c002b950>] walk_stackframe+0x0/0xa0 [<c002baac>] show_stack+0x28/0x32 [<c0587354>] dump_stack+0x62/0x7e [<c002fdee>] __warn+0x98/0xce [<c002fe52>] warn_slowpath_null+0x2e/0x3c [<c00e71ce>] vmap_page_range_noflush+0x134/0x15c [<c00e7886>] map_kernel_range_noflush+0xc/0x14 [<c00d54b8>] pcpu_populate_chunk+0x19e/0x236 [<c00d610e>] pcpu_balance_workfn+0x448/0x464 [<c00408d6>] process_one_work+0x16c/0x2ea [<c0040b46>] worker_thread+0xf2/0x3b2 [<c004519a>] kthread+0xce/0xdc [<c002a974>] ret_from_exception+0x0/0xc This patch fixes above warning by placing FIXMAP area below VMALLOC area. Fixes: f2c17aab ("RISC-V: Implement compile-time fixed mappings") Signed-off-by: NAnup Patel <anup.patel@wdc.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NPalmer Dabbelt <palmer@sifive.com>
-
由 Mahesh Salgaonkar 提交于
On pseries, TLB multihit are reported as D-Cache Multihit. This is because the wrongly populated mc_err_types[] array. Per PAPR, TLB error type is 0x04 and mc_err_types[4] points to "D-Cache" instead of "TLB" string. Fixup the mc_err_types[] array. Machine check error type per PAPR: 0x00 = Uncorrectable Memory Error (UE) 0x01 = SLB error 0x02 = ERAT Error 0x04 = TLB error 0x05 = D-Cache error 0x07 = I-Cache error Fixes: 8f0b8056 ("powerpc/pseries: Display machine check error details.") Cc: stable@vger.kernel.org # v4.20+ Reported-by: NAneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: NMahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Thomas Bogendoerfer 提交于
smatch complaint: arch/mips/sgi-ip27/ip27-irq.c:123 shutdown_bridge_irq() warn: variable dereferenced before check 'hd' (see line 121) Fix it by removing local variable and use hd->pin directly. Fixes: 69a07a41 ("MIPS: SGI-IP27: rework HUB interrupts") Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NThomas Bogendoerfer <tbogendoerfer@suse.de> Reviewed-by: NMukesh Ojha <mojha@codeaurora.org> Signed-off-by: NPaul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
-
由 Chong Qiao 提交于
KGDB_call_nmi_hook is called by other cpu through smp call. MIPS smp call is processed in ipi irq handler and regs is saved in handle_int. So kgdb_call_nmi_hook get regs by get_irq_regs and regs will be passed to kgdb_cpu_enter. Signed-off-by: NChong Qiao <qiaochong@loongson.cn> Reviewed-by: NDouglas Anderson <dianders@chromium.org> Acked-by: NDaniel Thompson <daniel.thompson@linaro.org> Signed-off-by: NPaul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: QiaoChong <qiaochong@loongson.cn>
-
由 Sean Christopherson 提交于
Most (all?) x86 platforms provide a port IO based reset mechanism, e.g. OUT 92h or CF9h. Userspace may emulate said mechanism, i.e. reset a vCPU in response to KVM_EXIT_IO, without explicitly announcing to KVM that it is doing a reset, e.g. Qemu jams vCPU state and resumes running. To avoid corruping %rip after such a reset, commit 0967b7bf ("KVM: Skip pio instruction when it is emulated, not executed") changed the behavior of PIO handlers, i.e. today's "fast" PIO handling to skip the instruction prior to exiting to userspace. Full emulation doesn't need such tricks becase re-emulating the instruction will naturally handle %rip being changed to point at the reset vector. Updating %rip prior to executing to userspace has several drawbacks: - Userspace sees the wrong %rip on the exit, e.g. if PIO emulation fails it will likely yell about the wrong address. - Single step exits to userspace for are effectively dropped as KVM_EXIT_DEBUG is overwritten with KVM_EXIT_IO. - Behavior of PIO emulation is different depending on whether it goes down the fast path or the slow path. Rather than skip the PIO instruction before exiting to userspace, snapshot the linear %rip and cancel PIO completion if the current value does not match the snapshot. For a 64-bit vCPU, i.e. the most common scenario, the snapshot and comparison has negligible overhead as VMCS.GUEST_RIP will be cached regardless, i.e. there is no extra VMREAD in this case. All other alternatives to snapshotting the linear %rip that don't rely on an explicit reset announcenment suffer from one corner case or another. For example, canceling PIO completion on any write to %rip fails if userspace does a save/restore of %rip, and attempting to avoid that issue by canceling PIO only if %rip changed then fails if PIO collides with the reset %rip. Attempting to zero in on the exact reset vector won't work for APs, which means adding more hooks such as the vCPU's MP_STATE, and so on and so forth. Checking for a linear %rip match technically suffers from corner cases, e.g. userspace could theoretically rewrite the underlying code page and expect a different instruction to execute, or the guest hardcodes a PIO reset at 0xfffffff0, but those are far, far outside of what can be considered normal operation. Fixes: 432baf60 ("KVM: VMX: use kvm_fast_pio_in for handling IN I/O") Cc: <stable@vger.kernel.org> Reported-by: NJim Mattson <jmattson@google.com> Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Vitaly Kuznetsov 提交于
When userspace initializes guest vCPUs it may want to zero all supported MSRs including Hyper-V related ones including HV_X64_MSR_STIMERn_CONFIG/ HV_X64_MSR_STIMERn_COUNT. With commit f3b138c5 ("kvm/x86: Update SynIC timers on guest entry only") we began doing stimer_mark_pending() unconditionally on every config change. The issue I'm observing manifests itself as following: - Qemu writes 0 to STIMERn_{CONFIG,COUNT} MSRs and marks all stimers as pending in stimer_pending_bitmap, arms KVM_REQ_HV_STIMER; - kvm_hv_has_stimer_pending() starts returning true; - kvm_vcpu_has_events() starts returning true; - kvm_arch_vcpu_runnable() starts returning true; - when kvm_arch_vcpu_ioctl_run() gets into (vcpu->arch.mp_state == KVM_MP_STATE_UNINITIALIZED) case: - kvm_vcpu_block() gets in 'kvm_vcpu_check_block(vcpu) < 0' and returns immediately, avoiding normal wait path; - -EAGAIN is returned from kvm_arch_vcpu_ioctl_run() immediately forcing userspace to retry. So instead of normal wait path we get a busy loop on all secondary vCPUs before they get INIT signal. This seems to be undesirable, especially given that this happens even when Hyper-V extensions are not used. Generally, it seems to be pointless to mark an stimer as pending in stimer_pending_bitmap and arm KVM_REQ_HV_STIMER as the only thing kvm_hv_process_stimers() will do is clear the corresponding bit. We may just not mark disabled timers as pending instead. Fixes: f3b138c5 ("kvm/x86: Update SynIC timers on guest entry only") Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Xiaoyao Li 提交于
Since MSR_IA32_ARCH_CAPABILITIES is emualted unconditionally even if host doesn't suppot it. We should move it to array emulated_msrs from arry msrs_to_save, to report to userspace that guest support this msr. Signed-off-by: NXiaoyao Li <xiaoyao.li@linux.intel.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Sean Christopherson 提交于
The CPUID flag ARCH_CAPABILITIES is unconditioinally exposed to host userspace for all x86 hosts, i.e. KVM advertises ARCH_CAPABILITIES regardless of hardware support under the pretense that KVM fully emulates MSR_IA32_ARCH_CAPABILITIES. Unfortunately, only VMX hosts handle accesses to MSR_IA32_ARCH_CAPABILITIES (despite KVM_GET_MSRS also reporting MSR_IA32_ARCH_CAPABILITIES for all hosts). Move the MSR_IA32_ARCH_CAPABILITIES handling to common x86 code so that it's emulated on AMD hosts. Fixes: 1eaafe91 ("kvm: x86: IA32_ARCH_CAPABILITIES is always supported") Cc: stable@vger.kernel.org Reported-by: NXiaoyao Li <xiaoyao.li@linux.intel.com> Cc: Jim Mattson <jmattson@google.com> Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Ben Gardon 提交于
Replace kvm_flush_remote_tlbs with kvm_flush_remote_tlbs_with_address in slot_handle_level_range. When range based flushes are not enabled kvm_flush_remote_tlbs_with_address falls back to kvm_flush_remote_tlbs. This changes the behavior of many functions that indirectly use slot_handle_level_range, iff the range based flushes are enabled. The only potential problem I see with this is that kvm->tlbs_dirty will be cleared less often, however the only caller of slot_handle_level_range that checks tlbs_dirty is kvm_mmu_notifier_invalidate_range_start which checks it and does a kvm_flush_remote_tlbs after calling kvm_unmap_hva_range anyway. Tested: Ran all kvm-unit-tests on a Intel Haswell machine with and without this patch. The patch introduced no new failures. Signed-off-by: NBen Gardon <bgardon@google.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Masahiro Yamada 提交于
I do not see any consistency about headers_install of <linux/kvm_para.h> and <asm/kvm_para.h>. According to my analysis of Linux 5.1-rc1, there are 3 groups: [1] Both <linux/kvm_para.h> and <asm/kvm_para.h> are exported alpha, arm, hexagon, mips, powerpc, s390, sparc, x86 [2] <asm/kvm_para.h> is exported, but <linux/kvm_para.h> is not arc, arm64, c6x, h8300, ia64, m68k, microblaze, nios2, openrisc, parisc, sh, unicore32, xtensa [3] Neither <linux/kvm_para.h> nor <asm/kvm_para.h> is exported csky, nds32, riscv This does not match to the actual KVM support. At least, [2] is half-baked. Nor do arch maintainers look like they care about this. For example, commit 0add5371 ("microblaze: Add missing kvm_para.h to Kbuild") exported <asm/kvm_para.h> to user-space in order to fix an in-kernel build error. We have two ways to make this consistent: [A] export both <linux/kvm_para.h> and <asm/kvm_para.h> for all architectures, irrespective of the KVM support [B] Match the header export of <linux/kvm_para.h> and <asm/kvm_para.h> to the KVM support My first attempt was [A] because the code looks cleaner, but Paolo suggested [B]. So, this commit goes with [B]. For most architectures, <asm/kvm_para.h> was moved to the kernel-space. I changed include/uapi/linux/Kbuild so that it checks generated asm/kvm_para.h as well as check-in ones. After this commit, there will be two groups: [1] Both <linux/kvm_para.h> and <asm/kvm_para.h> are exported arm, arm64, mips, powerpc, s390, x86 [2] Neither <linux/kvm_para.h> nor <asm/kvm_para.h> is exported alpha, arc, c6x, csky, h8300, hexagon, ia64, m68k, microblaze, nds32, nios2, openrisc, parisc, riscv, sh, sparc, unicore32, xtensa Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Acked-by: NCornelia Huck <cohuck@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Wei Yang 提交于
* nr_mmu_pages would be non-zero only if kvm->arch.n_requested_mmu_pages is non-zero. * nr_mmu_pages is always non-zero, since kvm_mmu_calculate_mmu_pages() never return zero. Based on these two reasons, we can merge the two *if* clause and use the return value from kvm_mmu_calculate_mmu_pages() directly. This simplify the code and also eliminate the possibility for reader to believe nr_mmu_pages would be zero. Signed-off-by: NWei Yang <richard.weiyang@gmail.com> Reviewed-by: NSean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Krish Sadhukhan 提交于
According to section "Checks on VMX Controls" in Intel SDM vol 3C, the following check is performed on vmentry of L2 guests: On processors that support Intel 64 architecture, the IA32_SYSENTER_ESP field and the IA32_SYSENTER_EIP field must each contain a canonical address. Signed-off-by: NKrish Sadhukhan <krish.sadhukhan@oracle.com> Reviewed-by: NMihai Carabas <mihai.carabas@oracle.com> Reviewed-by: NJim Mattson <jmattson@google.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-