- 10 9月, 2005 40 次提交
-
-
由 NeilBrown 提交于
This allows a device in a raid1 to be marked as "write mostly". Read requests will only be sent if there is no other option. Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
Both file-bitmaps and superblock bitmaps are supported. If you add a bitmap file on the array device, you lose. This introduces a 'default_bitmap_offset' field in mddev, as the ioctl used for adding a superblock bitmap doesn't have room for giving an offset. Later, this value will be setable via sysfs. Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
When we find a 'stale' bitmap, possibly because it is new, we should just assume every bit needs to be set, but rather base the setting of bits on the current state of the array (degraded and recovery_cp). Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
... otherwise we loose a reference and can never free the file. Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jun'ichi Nomura 提交于
Fix another bug in dm-raid1.c that the dirty region may stay in or be moved to clean list and freed while in use. It happens as follows: CPU0 CPU1 ------------------------------------------------------------------------------ rh_dec() if (atomic_dec_and_test(pending)) <the region is still marked dirty> rh_inc() if the region is clean mark the region dirty and remove from clean list mark the region clean and move to clean list atomic_inc(pending) At this stage, the region is in clean list and will be mistakenly reclaimed by rh_update_states() later. Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
md does not yet support BIO_RW_BARRIER, so be honest about it and fail (-EOPNOTSUPP) any such requests. Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
'this_sector' is a virtual (array) address while 'head_position' is a physical (device) address, so substraction doesn't make any sense. devs[slot].addr should be used instead of this_sector. However, this patch doesn't make much practical different to the read balancing due to the effects of later code. Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 viro@ZenIV.linux.org.uk 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 viro@ZenIV.linux.org.uk 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 viro@ZenIV.linux.org.uk 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 viro@ZenIV.linux.org.uk 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 viro@ZenIV.linux.org.uk 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ingo Molnar 提交于
This converts the final 20 DEFINE_SPINLOCK holdouts. (another 580 places are already using DEFINE_SPINLOCK). Build tested on x86. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ingo Molnar 提交于
Clean up timer initialization by introducing DEFINE_TIMER a'la DEFINE_SPINLOCK. Build and boot-tested on x86. A similar patch has been been in the -RT tree for some time. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Arnaud Patard 提交于
This set of two patches add support for the framebuffer of the Samsung S3C2410 ARM SoC. This driver was started about one year ago and is now used on iPAQ h1930/h1940, Acer n30 and probably other s3c2410-based machines I'm not aware of. I've also heard yesterday that it's working also on iPAQ rx3715/rx3115 (s3c2440-based machines). Signed-Off-By: NArnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NBen Dooks <ben@trinity.fluff.org> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Olaf Hering 提交于
Quiet an incorrect warning in aty128fb and radeonfb about the PCI ROM content. Macs work just find without that signature. Signed-off-by: NOlaf Hering <olh@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Antonino A. Daplas 提交于
Stop LCD displays from flickering during high loads. Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Antonino A. Daplas 提交于
Add ddc/i2c support for i810fb. This will allow the driver to get display information, especially for monitors with fickle timings. The i2c support depends on CONFIG_FB_I810_GTF. Changed __init* to __devinit* Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAlexander Nyberg <alexn@telia.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Antonino A. Daplas 提交于
The function bit_putcs() in drivers/video/console/bitblit.c is becoming large. Break it up into its component functions (bit_putcs_unaligned and bit_putcs_aligned). Incorporated fb_pad_aligned_buffer() optimization by Roman Zippel. Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Richard Purdie 提交于
To solve touchscreen interference problems devices like the Sharp Zaurus SL-C3000 need to know the length of the horitzontal sync pulses. This patch adds a hook to pxafb so the touchscreen driver can function correctly. Signed-Off-By: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Antonino A. Daplas 提交于
The var structure in calc_mode_timings is not properly initialized (zero set) which leads to undefined behavior when it is passed to fb_get_mode(). Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Antonino A. Daplas 提交于
nvidiafb_imageblit converts the bitdata stream from big_endian to little endian. This produces mirrored characters when machine is big_endian. Do not endian convert on big endian machines. Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Antonino A. Daplas 提交于
If console is blanked or in KD_GRAPHICS mode, delete cursor timer. No sense flashing the cursor when there's nothing to be seen. Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Antonino A. Daplas 提交于
Make "mode_option" available when compiled as a module. Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Antonino A. Daplas 提交于
If no EDID block is probed, if the display is digital and if no mode option is specified by the user, get the timings by CVT instead of using the global mode database. Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Antonino A. Daplas 提交于
The Coordinated Video Timings (CVT) is the latest standard approved by VESA concerning video timings generation. It addresses the limitation of GTF which is designed mainly for CRT displays. CRT's have a high blanking requirement (as much as 25% of the horizontal frame length) which artificially increases the pixelclock. Digital displays, on the other hand, needs to conserve the pixelclock as much as possible. The GTF also does not take into account the different aspect ratios in its calculation. The new function added is fb_find_mode_cvt(). It is called by fb_find_mode() if it recognizes a mode option string formatted for CVT. The format is: <xres>x<yres>[M][R][-<bpp>][<at-sign><refresh>][i][m] The 'M' tells the function to calculate using CVT. On it's own, it will compute a timing for CRT displays at 60Hz. If the 'R' is specified, 'reduced blanking' computation will be used, best for flatpanels. The 'i' and the 'm' is for 'interlaced mode' and 'with margins' respectively. To determine if CVT was used, check for dmesg for something like this: CVT Mode - <pix>M<n>[-R], ie: .480M3-R (800x600 reduced blanking) where: pix - product of xres and yres, in MB M - is a CVT mode n - the aspect ratio (3 - 4:3; 4 - 5:4; 9 - 16:9, 15:9; A - 16:10) -R - reduced blanking Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Paul Mackerras 提交于
This patch makes some small rearrangements of the PCI probing code in order to make it possible for arch code to set up the PCI tree without needing to duplicate code from the PCI layer unnecessarily. PPC64 will use this to set up the PCI tree from the Open Firmware device tree, which we need to do on logically-partitioned pSeries systems. Signed-off-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Rumen Ivanov Zarev 提交于
Trivial patch against 2.6.13 to unhide SMBus on Compaq Evo N620c laptop using Intel 82855PM chipset. Signed-off-by: NRumen Zarev <rzarev@caltech.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Rajesh Shah 提交于
Martin Franc reported that the pciehp driver was not enabling bus master capability on his hot-plugged card. pciehprm_enable_card() was updating the PCI command register only if _HPP indicated a value for SERR or PERR that was different from the current setting. I don't have hardware that reproduces this problem, but Martin reports that this patch fixes the problem for him. Signed-off-by: NRajesh Shah <rajesh.shah@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> From rzarev@its.caltech.edu Tue Sep 6 18:29:50 2005 Date: Tue, 6 Sep 2005 13:39:32 -0700 (PDT) From: Rumen Ivanov Zarev <rzarev@its.caltech.edu> Message-Id: <200509062039.j86KdWMr014934@inky.its.caltech.edu> To: gregkh@suse.de Subject: PCI: Unhide SMBus on Compaq Evo N620c Cc: linux-kernel@vger.kernel.org Trivial patch against 2.6.13 to unhide SMBus on Compaq Evo N620c laptop using Intel 82855PM chipset. Signed-off-by: NRumen Zarev <rzarev@caltech.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> --- drivers/pci/quirks.c | 6 ++++++ 1 file changed, 6 insertions(+) --- gregkh-2.6.orig/drivers/pci/quirks.c 2005-09-09 10:28:55.000000000 -0700 +++ gregkh-2.6/drivers/pci/quirks.c 2005-09-09 13:51:44.000000000 -0700 @@ -876,6 +876,12 @@ static void __init asus_hides_smbus_host case 0xC00C: /* Samsung P35 notebook */ asus_hides_smbus = 1; } + } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_COMPAQ)) { + if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB) + switch(dev->subsystem_device) { + case 0x0058: /* Compaq Evo N620c */ + asus_hides_smbus = 1; + } } } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82845_HB, asus_hides_smbus_hostbridge );
-
由 Daniel Burcaw 提交于
This patch changes radeon to request only resources 0 and 2 instead of all 3. This works around problems with some setups where BAR 1 (IO BAR) has not been assigned by the firmware since it's not used on the machine and the kernel fails to assign something to it due to the card being between a P2P bridge that was configured without an IO range at all. This typically fixes radeonfb on some Apple Xserve G5 machines Signed-off-by: NDaniel Burcaw <dburcaw@terrasoftsolutions.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Knut Petersen 提交于
This trivial patch gives a performance boost to the framebuffer console Constructing the bitmaps that are given to the bitblit functions of the framebuffer drivers is time consuming. Here we avoide a call to the slow fb_pad_aligned_buffer(). The patch replaces that call with a simple but much more efficient bytewise copy. The kernel spends a significant time at this place if you use 8x* fonts. Every pixel displayed on your screen is prepared here. Some benchmark results: Displaying a file of 2000 lines with 160 characters each takes 889 ms system time using cyblafb on my system (I´m using a 1280x1024 video mode, resulting in a 160x64 character console) Displaying the same file with the enclosed patch applied to 2.6.13 only takes 760 ms system time, saving 129 ms or 14.5%. Font widths other than 8 are not affected. The advantage and correctness of this patch should be obvious. Signed-off-by: NKnut Petersen <Knut_Petersen@t-online.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Knut Petersen 提交于
This is a framebuffer driver for the Cyberblade/i1 graphics core. Currently tridenfb claims to support the cyberblade/i1 graphics core. This is of very limited truth. Even vesafb is faster and provides more working modes and a much better quality of the video signal. There is a great number of bugs in tridentfb ... but most often it is impossible to decide if these bugs are real bugs or if fixing them for the cyberblade/i1 core would break support for one of the other supported chips. Tridentfb seems to be unmaintained,and documentation for most of the supported chips is not available. So "fixing" cyberblade/i1 support inside of tridentfb was not an option, it would have caused numerous if(CYBERBLADEi1) else ... cases and would have rendered the code to be almost unmaintainable. A first version of this driver was published on 2005-07-31. A fix for a bug reported by Jochen Hein was integrated as well as some changes requested by Antonino A. Daplas. A message has been added to tridentfb to inform current users of tridentfb to switch to cyblafb if the cyberblade/i1 graphics core is detected. This patch is one logical change, but because of the included documentation it is bigger than 70kb. Therefore it is not sent to lkml and linux-fbdev-devel, Signed-off-by: NKnut Petersen <Knut_Petersen@t-online.de> Cc: Muli Ben-Yehuda <mulix@mulix.org> Acked-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Olaf Hering 提交于
err remains uninitialized of pci_request_regions fails. Found by Thorsten Kukuk, I added a few more checks. Signed-off-by: NOlaf Hering <olh@suse.de> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Thomas Winischhofer 提交于
This lifts sisfb from version 1.7.17 to version 1.8.9. Changes include: - Added support for XGI V3XT, V5, V8, Z7 chipsets, including POSTing of all of these chipsets. - Added support for latest SiS chipsets (761). - Added support for SiS76x memory "hybrid" mode. - Added support for new LCD resolutions (eg 1280x854, 856x480). - Fixed support for 320x240 STN panels (for embedded devices). - Fixed many HDTV modes (525p, 750p, 1080i). - Fixed PCI config register reading/writing to use proper kernel functions for this purpose. - Fixed PCI ROM handling to use the kernel's proper functions. - Removed lots of "typedef"s. - Removed lots of code which was for X.org/XFree86 only. - Fixed coding style in many places. - Removed lots of 2.4 cruft. - Reduced stack size by unifying two previously separate structs into one. - Added new hooks for memory allocation (for DRM). Now the driver can truly handle multiple cards, including memory management. - Fixed numerous minor bugs. Signed-off-by: NThomas Winischhofer <thomas@winischhofer.net> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ian Romanick 提交于
This updates the matroxfb code so that it can find the PInS data embedded in the BIOS on PowerPC cards. The process for finding the data is different on OpenFirmware cards than on x86 cards, and the code for doing so was missing. After patching, building, installing, and booting a kernel, you should grep for "PInS" in /var/log/messages. You should see two messages in the log: PInS data found at offset XXXXX PInS memtype = X On the GXT135p card I get "31168" and "5". The first value is irrelevant, but it's presence lets me know that the PInS data was actually found. On a GXT130p, the second value should be 3. Since I don't have access to that hardware, if someone can verify that, I will submit a follow-on patch that rips out all the memtype parameter stuff. Signed-off-by: NIan Romanick <idr@us.ibm.com> Signed-off-by: NPetr Vandrovec <vandrove@vc.cvut.cz> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Antonino A. Daplas 提交于
The link for ATI's product page in drivers/video/Kconfig for FB_RADEON is broken. Replace with a product comparison page. Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alexander Kern 提交于
Currently, atyfb has code that sets the hsync and vsync polarity based on the current video mode, without letting the user override the settings. Remove this particular code. The sync polarities are set by the PROM, the user or by the videomode. Signed-off-by: NAlexander Kern <alex.kern@gmx.de> Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Antonino A. Daplas 提交于
On a vc resize, the contents of the old screen buffer are transferred to the new screenbuffer. If the new screenbuffer is smaller than the old one, only the contents from the bottom are copied to new. If the contents of the old buffer are located at the top, then the contents will not be copied to the new buffer resulting in a blank screen. This bug will happen only if the vc in question is not in the foreground. Doing an fbset -a or con2fbmap will trigger this bug. To fix this problem, base the start of the copy from the location of the current cursor. If the cursor is near the top of the buffer, copy the contents at the top, and if the cursor is near the bottom of the buffer, then copy the contents at the bottom. In the unlikely case where the new row size is greater than 2x smaller than the old one, and the cursor is in the middle, copy 1/2 screenful from the top and bottom of the cursor position. Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Antonino A. Daplas 提交于
Currently, the default linux 16-colors are converted to 4-colors by simply dividing the values by 4. However, this is not necessarily correct since the first 4 colors are converted to black, rendering them invisible. So, for black, no conversion; for light colors, convert to gray, for normal text color, no conversion, and for bright colors, convert to intense white. Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Antonino A. Daplas 提交于
Currently, fbcon assumes that the visual FB_VISUAL_MONO* is always 1 bit. According to Geert, there are old hardware where it's possible to have monochrome at 8-bit, but has only 2 colors, black - 0x00 and white - 0xff. Fix color handlers (fb_get_color_depth, and get_color) for this special case. Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-