This patch sets the timer IRQ at run-time by moving the sys_timer
structure and the timer_init function to the realview_eb.c file. This
allows multiple RealView platforms to be compiled in the same kernel
image.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch modifies the get_irqnr_preamble macro to work with multiple
platforms at run-time by reading the address of the GIC controller from
the gic_cpu_base_addr variable. This variable is defined in core.c and
intialised in realview_eb.c (gic_init_irq).
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch adds the core-tile detection and only enables devices if the
corresponding tile is present. It currently detects the ARM11MPCore via
the core_tile_eb11mp() macro.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch moves the IRQ and DMA definitions from core.h into
realview_eb.c since they are platform-specific. It adds a
realview_eb11mp_fixup function to adjust the IRQ numbers if the
ARM11MPCore tile is fitted. The realview_smc91x_device is also moved
from core.c into realview_eb.c.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch moves the platform specific definitions from platform.h into
the board-eb.h file. It drops the INT_* definitions as they are no
longer used in irqs.h (moved to board-eb.h). It renames REALVIEW_*
macros to REALVIEW_EB_* or REALVIEW_EB11MP_* to distinguish between
standard EB and EB + the ARM11MPCore tile. The platform.h file contains
common definitions to the RealView platforms and it is only directly
included in board-*.h files.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch registers the local timers on ARM11MPCore as clock event
devices. The clock device can be set up as periodic or oneshot.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch adds dummy local timers for each CPU so that the board clock
device is used to broadcast events to the other CPUs. The patch also
adds the declaration for the dummy_timer_setup function (the equivalent
of local_timer_setup when CONFIG_LOCAL_TIMERS is not set).

Due to the way clockevents work, the dummy timer on the first CPU has to
be registered before the board timer.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch adds the smp_call_function_single and smp_timer_broadcast
functions and modifies ipi_timer to call the platform-specific function
local_timer_interrupt.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The patch updates the RealView code to the clockevents infrastructure.
The SMP support is implemented in subsequent patches. Based on the
Versatile implementation by Kevin Hilman.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The patch updates the RealView platform code to use the generic
clocksource infrastructure for basic time keeping. Based on the
Versatile implementation by Kevin Hilman.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

* git://git.infradead.org/battery-2.6:
  apm_power: check I.intval for zero value, we use it as the divisor
  MAINTAINERS: remove kernel-discuss@handhelds.org list
  pda_power: implement polling
  pda_power: various cleanups
  apm_power: support using VOLTAGE_* properties for apm calculations
  pda_power: add suspend/resume support
  power_supply: add few more values and props
  pda_power: only register available psu
  power: fix incorrect unregistration in power_supply_create_attrs error path
  power: remove POWER_SUPPLY_PROP_CAPACITY_LEVEL
  [BATTERY] power_supply_leds: use kasprintf
  [BATTERY] Every file should include the headers containing the prototypes for its global functions.

* 'for-linus' of git://linux-nfs.org/~bfields/linux: (100 commits)
  SUNRPC: RPC program information is stored in unsigned integers
  SUNRPC: Move exported symbol definitions after function declaration part 2
  NLM: tear down RPC clients in nlm_shutdown_hosts
  SUNRPC: spin svc_rqst initialization to its own function
  nfsd: more careful input validation in nfsctl write methods
  lockd: minor log message fix
  knfsd: don't bother mapping putrootfh enoent to eperm
  rdma: makefile
  rdma: ONCRPC RDMA protocol marshalling
  rdma: SVCRDMA sendto
  rdma: SVCRDMA recvfrom
  rdma: SVCRDMA Core Transport Services
  rdma: SVCRDMA Transport Module
  rdma: SVCRMDA Header File
  svc: Add svc_xprt_names service to replace svc_sock_names
  knfsd: Support adding transports by writing portlist file
  svc: Add svc API that queries for a transport instance
  svc: Add /proc/sys/sunrpc/transport files
  svc: Add transport hdr size for defer/revisit
  svc: Move the xprt independent code to the svc_xprt.c file
  ...

* 'suspend' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (38 commits)
  suspend: cleanup reference to swsusp_pg_dir[]
  PM: Remove obsolete /sys/devices/.../power/state docs
  Hibernation: Invoke suspend notifications after console switch
  Suspend: Invoke suspend notifications after console switch
  Suspend: Clean up suspend_64.c
  Suspend: Add config option to disable the freezer if architecture wants that
  ACPI: Print message before calling _PTS
  ACPI hibernation: Call _PTS before suspending devices
  Hibernation: Introduce begin() and end() callbacks
  ACPI suspend: Call _PTS before suspending devices
  ACPI: Separate disabling of GPEs from _PTS
  ACPI: Separate invocations of _GTS and _BFS from _PTS and _WAK
  Suspend: Introduce begin() and end() callbacks
  suspend: fix ia64 allmodconfig build
  ACPI: clear GPE earily in resume to avoid warning
  Suspend: Clean up Kconfig (V2)
  Hibernation: Clean up Kconfig (V2)
  Hibernation: Update messages
  Suspend: Use common prefix in messages
  Hibernation: Remove unnecessary variable declaration
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6: (64 commits)
  PCI: make pci_bus a struct device
  PCI: fix codingstyle issues in include/linux/pci.h
  PCI: fix codingstyle issues in drivers/pci/pci.h
  PCI: PCIE ASPM support
  PCI: Fix fakephp deadlock
  PCI: modify SB700 SATA MSI quirk
  PCI: Run ACPI _OSC method on root bridges only
  PCI ACPI: AER driver should only register PCIe devices with _OSC
  PCI ACPI: Added a function to register _OSC with only PCIe devices.
  PCI: constify function pointer tables
  PCI: Convert drivers/pci/proc.c to use unlocked_ioctl
  pciehp: block new requests from the device before power off
  pciehp: workaround against Bad DLLP during power off
  pciehp: wait for 1000ms before LED operation after power off
  PCI: Remove pci_enable_device_bars() from documentation
  PCI: Remove pci_enable_device_bars()
  PCI: Remove users of pci_enable_device_bars()
  PCI: Add pci_enable_device_{io,mem} intefaces
  PCI: avoid save the same type of cap multiple times
  PCI: correctly initialize a structure for pcie_save_pcix_state()
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (128 commits)
  USB: fix codingstyle issues in drivers/usb/core/*.c
  USB: fix codingstyle issues in drivers/usb/core/message.c
  USB: fix codingstyle issues in drivers/usb/core/hcd-pci.c
  USB: fix codingstyle issues in drivers/usb/core/devio.c
  USB: fix codingstyle issues in drivers/usb/core/devices.c
  USB: fix codingstyle issues in drivers/usb/core/*.h
  USB: fix codingstyle issues in include/linux/usb/
  USB: fix codingstyle issues in include/linux/usb.h
  USB: mark USB drivers as being GPL only
  USB: use a real vendor and product id for root hubs
  USB: mount options: fix usbfs
  USB: Fix usb_serial_driver structure for Kobil cardreader driver.
  usb: ehci should use u16 for isochronous intervals
  usb: ehci, remove false clear-reset path
  USB: Use menuconfig objects
  usb: ohci-sm501 driver
  usb: dma bounce buffer support
  USB: last abuses of intfdata in close for usb-serial drivers
  USB: kl5kusb105 don't flush to logically disconnected devices
  USB: oti6858: cleanup
  ...

Rafael J. Wysocki reported weird, multi-seconds delays during
suspend/resume and bisected it back to:

  commit 82a1fcb9
  Author: Ingo Molnar <mingo@elte.hu>
  Date:   Fri Jan 25 21:08:02 2008 +0100

      softlockup: automatically detect hung TASK_UNINTERRUPTIBLE tasks

fix it:

 - restore the old wakeup mechanism
 - fix break usage in do_each_thread() { } while_each_thread().
 - fix the hotplug switch stmt, a fall-through case was broken.
Bisected-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Tested-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAnton Vorontsov <cbou@mail.ru>

kernel-discuss at handhelds.org is down for months, and nobody
knows why. So remove it for now.
Signed-off-by: NAnton Vorontsov <cbou@mail.ru>

Signed-off-by: NAnton Vorontsov <cbou@mail.ru>

- handle spurious interrupts correctly;
- get rid of pda_power_supplies array, use two variables instead;
- factor out psy_changed() function, it will be used for polling.
Signed-off-by: NAnton Vorontsov <cbou@mail.ru>

It's pretty dummy, but useful for batteries for which we can only
get voltages.
Signed-off-by: NDmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: NAnton Vorontsov <cbou@mail.ru>

Add suspend/resume/wakeup support for pda_power.
Signed-off-by: NDmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: NAnton Vorontsov <cbou@mail.ru>

Add LiMn (one of the most common for small non-rechargable batteries)
battery technology and voltage_min/_max properties support.
Signed-off-by: NDmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: NAnton Vorontsov <cbou@mail.ru>

Currently pda-power adds both ac and usb power supply units.
This patch fixes it so that psu are added only if they are enabled.
Signed-off-by: NDmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: NAnton Vorontsov <cbou@mail.ru>

In power_supply_create_attrs(), we create static attributes as referenced
by power_supply_static_attrs[i].  After that, if we fail, we unregister
via power_supply_static_attrs[psy->properties[i]].  This is incorrect, as
psy->properties has absolutely no bearing on static attribs.  This patch
fixes it to unregister the correct attrib.

Another line which was unnecessarily line wrapped is also unwrapped.
Signed-off-by: NAndres Salomon <dilinger@debian.org>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

The CAPACITY_LEVEL stuff defines various levels of charge; however, what
is the difference between them?  What differentiates between HIGH and NORMAL,
LOW and CRITICAL, etc?

As it appears that these are fairly arbitrary, we end up making such policy
decisions in the kernel (or in hardware).  This is the sort of decision that
should be made in userspace, not in the kernel.

If the hardware does not support _CAPACITY and it cannot be easily calculated,
then perhaps the driver should register a custom CAPACITY_LEVEL attribute;
however, userspace should not become accustomed to looking for such a thing,
and we should certainly not encourage drivers to provide CAPACITY_LEVEL
stubs.

The following removes support for POWER_SUPPLY_PROP_CAPACITY_LEVEL.  The
OLPC battery driver is the only driver making use of this, so it's
removed from there as well.
Signed-off-by: NAndres Salomon <dilinger@debian.org>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Use kasprintf instead of kmalloc()-strcpy()-strcat().

Cc: Anton Vorontsov <cbou@mail.ru>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: NAnton Vorontsov <cbou@mail.ru>

Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAnton Vorontsov <cbou@mail.ru>

swsusp_pg_dir[] is used for suspend, but not for hibernation.
clean-up the ifdefs which worked by accident, while implying the opposite.
Delete the __nosavedata, which also implied the opposite.

Some day we may optimize CONFIG_ACPI_SLEEP to build minimal kernels
for just hibernate or just suspend but not both,
but today isn't that day.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NLen Brown <len.brown@intel.com>

The /sys/devices/.../power/state files have been gone for a while
now, but I just noticed some documentation that still refers to
them.  (Fortunately described as DEPRECATED and WILL REMOVE).

Time to remove that obsolete documentation too ...
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Acked-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NLen Brown <len.brown@intel.com>

Following the recent change in the suspend code path, switch consoles before
calling PM notifiers during hibernation.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NLen Brown <len.brown@intel.com>

In order to fix APM emulation it is necessary to enable apm-emulation
notifications for suspends triggered in various ways via the suspend
notifiers.  However, this will cause the systems using APM emulation
to lock up between X being needed to switch away from the VT and X
already waiting for resume in the APM ioctl.

This patch moves the console switch (if enabled) before the suspend
notification (and after the resume notification) to avoid this issue.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NLen Brown <len.brown@intel.com>

There's a freakishly long comment in suspend_64.c, shorten it.
Signed-off-by: NBorislav Petkov <bbpetkov@yahoo.de>
Acked-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NLen Brown <len.brown@intel.com>

This patch makes the freezer optional for suspend to allow the
system to work (or not work) like the original PMU suspend.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Acked-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NLen Brown <len.brown@intel.com>

Make acpi_sleep_prepare() static and cause it to print a message
specifying the ACPI system sleep state to be entered (helpful for
debugging the suspend/hibernation code).
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NLen Brown <len.brown@intel.com>

The ACPI 1.0 specification wants us to put devices into low power
states after executing the _PTS global control method, while ACPI
2.0 and later want us to do that in the reverse order.  The current
hibernation code follows ACPI 2.0 in that respect which may cause some
ACPI 1.0x systems to hang during hibernation (ref.
http://bugzilla.kernel.org/show_bug.cgi?id=9528).

Make the hibernation code execute _PTS before putting devices into
low power states (ie. in accordance with ACPI 1.0x) with the
possibility to override that using the 'acpi_new_pts_ordering' kernel
command line option.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NLen Brown <len.brown@intel.com>

Introduce global hibernation callback .end() and rename global
hibernation callback .start() to .begin(), in analogy with the
recent modifications of the global suspend callbacks.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NLen Brown <len.brown@intel.com>

The ACPI 1.0 specification wants us to put devices into low power
states after executing the _PTS global control method, while ACPI
2.0 and later want us to do that in the reverse order.  The current
suspend code follows ACPI 2.0 in that respect which causes some
ACPI 1.0x systems to hang during suspend (ref.
http://bugzilla.kernel.org/show_bug.cgi?id=9528).

Make the suspend code execute _PTS before putting devices into low
power states (ie. in accordance with ACPI 1.0x) and provide a command
line option to override the default if need be.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NLen Brown <len.brown@intel.com>

The preparation to enter an ACPI system sleep state is now tied to
the disabling of GPEs, but the GPEs should not be disabled before
suspending devices.  Since on ACPI 1.0x systems the _PTS global
control method should be executed before suspending devices, we
need to disable GPEs separately.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NLen Brown <len.brown@intel.com>

The execution of ACPI global control methods _GTS and _BFS is
currently tied to the preparation to enter a sleep state and to the
leaving of the sleep state, respectively.  However, these functions
are called before disabling the nonboot CPUs and after enabling
them, respectively (in fact, on ACPI 1.0x systems the first of them
ought to be called before suspending devices), while according to the
ACPI specification, _GTS is to be executed right prior to entering
the system sleep state and _BFS is to be executed right after the
platfor firmware has returned control to the OS on wake up.

Move the execution of _GTS and _BFS to the right places.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NLen Brown <len.brown@intel.com>