- 15 3月, 2016 9 次提交
-
-
由 Ingo Molnar 提交于
Conflicts: kernel/rcu/tree.c Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull NOHZ updates from Ingo Molnar: "NOHZ enhancements, by Frederic Weisbecker, which reorganizes/refactors the NOHZ 'can the tick be stopped?' infrastructure and related code to be data driven, and harmonizes the naming and handling of all the various properties" [ This makes the ugly "fetch_or()" macro that the scheduler used internally a new generic helper, and does a bad job at it. I'm pulling it, but I've asked Ingo and Frederic to get this fixed up ] * 'timers-nohz-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched-clock: Migrate to use new tick dependency mask model posix-cpu-timers: Migrate to use new tick dependency mask model sched: Migrate sched to use new tick dependency mask model sched: Account rr tasks perf: Migrate perf to use new tick dependency mask model nohz: Use enum code for tick stop failure tracing message nohz: New tick dependency mask nohz: Implement wide kick on top of irq work atomic: Export fetch_or()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull scheduler updates from Ingo Molnar: "The main changes in this cycle are: - Make schedstats a runtime tunable (disabled by default) and optimize it via static keys. As most distributions enable CONFIG_SCHEDSTATS=y due to its instrumentation value, this is a nice performance enhancement. (Mel Gorman) - Implement 'simple waitqueues' (swait): these are just pure waitqueues without any of the more complex features of full-blown waitqueues (callbacks, wake flags, wake keys, etc.). Simple waitqueues have less memory overhead and are faster. Use simple waitqueues in the RCU code (in 4 different places) and for handling KVM vCPU wakeups. (Peter Zijlstra, Daniel Wagner, Thomas Gleixner, Paul Gortmaker, Marcelo Tosatti) - sched/numa enhancements (Rik van Riel) - NOHZ performance enhancements (Rik van Riel) - Various sched/deadline enhancements (Steven Rostedt) - Various fixes (Peter Zijlstra) - ... and a number of other fixes, cleanups and smaller enhancements" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (29 commits) sched/cputime: Fix steal_account_process_tick() to always return jiffies sched/deadline: Remove dl_new from struct sched_dl_entity Revert "kbuild: Add option to turn incompatible pointer check into error" sched/deadline: Remove superfluous call to switched_to_dl() sched/debug: Fix preempt_disable_ip recording for preempt_disable() sched, time: Switch VIRT_CPU_ACCOUNTING_GEN to jiffy granularity time, acct: Drop irq save & restore from __acct_update_integrals() acct, time: Change indentation in __acct_update_integrals() sched, time: Remove non-power-of-two divides from __acct_update_integrals() sched/rt: Kick RT bandwidth timer immediately on start up sched/debug: Add deadline scheduler bandwidth ratio to /proc/sched_debug sched/debug: Move sched_domain_sysctl to debug.c sched/debug: Move the /sys/kernel/debug/sched_features file setup into debug.c sched/rt: Fix PI handling vs. sched_setscheduler() sched/core: Remove duplicated sched_group_set_shares() prototype sched/fair: Consolidate nohz CPU load update code sched/fair: Avoid using decay_load_missed() with a negative value sched/deadline: Always calculate end of period on sched_yield() sched/cgroup: Fix cgroup entity load tracking tear-down rcu: Use simple wait queues where possible in rcutree ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull RAS updates from Ingo Molnar: "Various RAS updates: - AMD MCE support updates for future CPUs, fixes and 'SMCA' (Scalable MCA) error decoding support (Aravind Gopalakrishnan) - x86 memcpy_mcsafe() support, to enable smart(er) hardware error recovery in NVDIMM drivers, based on an extension of the x86 exception handling code. (Tony Luck)" * 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: EDAC/sb_edac: Fix computation of channel address x86/mm, x86/mce: Add memcpy_mcsafe() x86/mce/AMD: Document some functionality x86/mce: Clarify comments regarding deferred error x86/mce/AMD: Fix logic to obtain block address x86/mce/AMD, EDAC: Enable error decoding of Scalable MCA errors x86/mce: Move MCx_CONFIG MSR definitions x86/mce: Check for faults tagged in EXTABLE_CLASS_FAULT exception table entries x86/mm: Expand the exception table logic to allow new handling options x86/mce/AMD: Set MCAX Enable bit x86/mce/AMD: Carve out threshold block preparation x86/mce/AMD: Fix LVT offset configuration for thresholding x86/mce/AMD: Reduce number of blocks scanned per bank x86/mce/AMD: Do not perform shared bank check for future processors x86/mce: Fix order of AMD MCE init function call
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf updates from Ingo Molnar: "Main kernel side changes: - Big reorganization of the x86 perf support code. The old code grew organically deep inside arch/x86/kernel/cpu/perf* and its naming became somewhat messy. The new location is under arch/x86/events/, using the following cleaner hierarchy of source code files: perf/x86: Move perf_event.c .................. => x86/events/core.c perf/x86: Move perf_event_amd.c .............. => x86/events/amd/core.c perf/x86: Move perf_event_amd_ibs.c .......... => x86/events/amd/ibs.c perf/x86: Move perf_event_amd_iommu.[ch] ..... => x86/events/amd/iommu.[ch] perf/x86: Move perf_event_amd_uncore.c ....... => x86/events/amd/uncore.c perf/x86: Move perf_event_intel_bts.c ........ => x86/events/intel/bts.c perf/x86: Move perf_event_intel.c ............ => x86/events/intel/core.c perf/x86: Move perf_event_intel_cqm.c ........ => x86/events/intel/cqm.c perf/x86: Move perf_event_intel_cstate.c ..... => x86/events/intel/cstate.c perf/x86: Move perf_event_intel_ds.c ......... => x86/events/intel/ds.c perf/x86: Move perf_event_intel_lbr.c ........ => x86/events/intel/lbr.c perf/x86: Move perf_event_intel_pt.[ch] ...... => x86/events/intel/pt.[ch] perf/x86: Move perf_event_intel_rapl.c ....... => x86/events/intel/rapl.c perf/x86: Move perf_event_intel_uncore.[ch] .. => x86/events/intel/uncore.[ch] perf/x86: Move perf_event_intel_uncore_nhmex.c => x86/events/intel/uncore_nmhex.c perf/x86: Move perf_event_intel_uncore_snb.c => x86/events/intel/uncore_snb.c perf/x86: Move perf_event_intel_uncore_snbep.c => x86/events/intel/uncore_snbep.c perf/x86: Move perf_event_knc.c .............. => x86/events/intel/knc.c perf/x86: Move perf_event_p4.c ............... => x86/events/intel/p4.c perf/x86: Move perf_event_p6.c ............... => x86/events/intel/p6.c perf/x86: Move perf_event_msr.c .............. => x86/events/msr.c (Borislav Petkov) - Update various x86 PMU constraint and hw support details (Stephane Eranian) - Optimize kprobes for BPF execution (Martin KaFai Lau) - Rewrite, refactor and fix the Intel uncore PMU driver code (Thomas Gleixner) - Rewrite, refactor and fix the Intel RAPL PMU code (Thomas Gleixner) - Various fixes and smaller cleanups. There are lots of perf tooling updates as well. A few highlights: perf report/top: - Hierarchy histogram mode for 'perf top' and 'perf report', showing multiple levels, one per --sort entry: (Namhyung Kim) On a mostly idle system: # perf top --hierarchy -s comm,dso Then expand some levels and use 'P' to take a snapshot: # cat perf.hist.0 - 92.32% perf 58.20% perf 22.29% libc-2.22.so 5.97% [kernel] 4.18% libelf-0.165.so 1.69% [unknown] - 4.71% qemu-system-x86 3.10% [kernel] 1.60% qemu-system-x86_64 (deleted) + 2.97% swapper # - Add 'L' hotkey to dynamicly set the percent threshold for histogram entries and callchains, i.e. dynamicly do what the --percent-limit command line option to 'top' and 'report' does. (Namhyung Kim) perf mem: - Allow specifying events via -e in 'perf mem record', also listing what events can be specified via 'perf mem record -e list' (Jiri Olsa) perf record: - Add 'perf record' --all-user/--all-kernel options, so that one can tell that all the events in the command line should be restricted to the user or kernel levels (Jiri Olsa), i.e.: perf record -e cycles:u,instructions:u is equivalent to: perf record --all-user -e cycles,instructions - Make 'perf record' collect CPU cache info in the perf.data file header: $ perf record usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.017 MB perf.data (7 samples) ] $ perf report --header-only -I | tail -10 | head -8 # CPU cache info: # L1 Data 32K [0-1] # L1 Instruction 32K [0-1] # L1 Data 32K [2-3] # L1 Instruction 32K [2-3] # L2 Unified 256K [0-1] # L2 Unified 256K [2-3] # L3 Unified 4096K [0-3] Will be used in 'perf c2c' and eventually in 'perf diff' to allow, for instance running the same workload in multiple machines and then when using 'diff' show the hardware difference. (Jiri Olsa) - Improved support for Java, using the JVMTI agent library to do jitdumps that then will be inserted in synthesized PERF_RECORD_MMAP2 events via 'perf inject' pointed to synthesized ELF files stored in ~/.debug and keyed with build-ids, to allow symbol resolution and even annotation with source line info, see the changeset comments to see how to use it (Stephane Eranian) perf script/trace: - Decode data_src values (e.g. perf.data files generated by 'perf mem record') in 'perf script': (Jiri Olsa) # perf script perf 693 [1] 4.088652: 1 cpu/mem-loads,ldlat=30/P: ffff88007d0b0f40 68100142 L1 hit|SNP None|TLB L1 or L2 hit|LCK No <SNIP> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - Improve support to 'data_src', 'weight' and 'addr' fields in 'perf script' (Jiri Olsa) - Handle empty print fmts in 'perf script -s' i.e. when running python or perl scripts (Taeung Song) perf stat: - 'perf stat' now shows shadow metrics (insn per cycle, etc) in interval mode too. E.g: # perf stat -I 1000 -e instructions,cycles sleep 1 # time counts unit events 1.000215928 519,620 instructions # 0.69 insn per cycle 1.000215928 752,003 cycles <SNIP> - Port 'perf kvm stat' to PowerPC (Hemant Kumar) - Implement CSV metrics output in 'perf stat' (Andi Kleen) perf BPF support: - Support converting data from bpf events in 'perf data' (Wang Nan) - Print bpf-output events in 'perf script': (Wang Nan). # perf record -e bpf-output/no-inherit,name=evt/ -e ./test_bpf_output_3.c/map:channel.event=evt/ usleep 1000 # perf script usleep 4882 21384.532523: evt: ffffffff810e97d1 sys_nanosleep ([kernel.kallsyms]) BPF output: 0000: 52 61 69 73 65 20 61 20 Raise a 0008: 42 50 46 20 65 76 65 6e BPF even 0010: 74 21 00 00 t!.. BPF string: "Raise a BPF event!" # - Add API to set values of map entries in a BPF object, be it individual map slots or ranges (Wang Nan) - Introduce support for the 'bpf-output' event (Wang Nan) - Add glue to read perf events in a BPF program (Wang Nan) - Improve support for bpf-output events in 'perf trace' (Wang Nan) ... and tons of other changes as well - see the shortlog and git log for details!" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (342 commits) perf stat: Add --metric-only support for -A perf stat: Implement --metric-only mode perf stat: Document CSV format in manpage perf hists browser: Check sort keys before hot key actions perf hists browser: Allow thread filtering for comm sort key perf tools: Add sort__has_comm variable perf tools: Recalc total periods using top-level entries in hierarchy perf tools: Remove nr_sort_keys field perf hists browser: Cleanup hist_browser__fprintf_hierarchy_entry() perf tools: Remove hist_entry->fmt field perf tools: Fix command line filters in hierarchy mode perf tools: Add more sort entry check functions perf tools: Fix hist_entry__filter() for hierarchy perf jitdump: Build only on supported archs tools lib traceevent: Add '~' operation within arg_num_eval() perf tools: Omit unnecessary cast in perf_pmu__parse_scale perf tools: Pass perf_hpp_list all the way through setup_sort_list perf tools: Fix perf script python database export crash perf jitdump: DWARF is also needed perf bench mem: Prepare the x86-64 build for upstream memcpy_mcsafe() changes ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull read-only kernel memory updates from Ingo Molnar: "This tree adds two (security related) enhancements to the kernel's handling of read-only kernel memory: - extend read-only kernel memory to a new class of formerly writable kernel data: 'post-init read-only memory' via the __ro_after_init attribute, and mark the ARM and x86 vDSO as such read-only memory. This kind of attribute can be used for data that requires a once per bootup initialization sequence, but is otherwise never modified after that point. This feature was based on the work by PaX Team and Brad Spengler. (by Kees Cook, the ARM vDSO bits by David Brown.) - make CONFIG_DEBUG_RODATA always enabled on x86 and remove the Kconfig option. This simplifies the kernel and also signals that read-only memory is the default model and a first-class citizen. (Kees Cook)" * 'mm-readonly-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: ARM/vdso: Mark the vDSO code read-only after init x86/vdso: Mark the vDSO code read-only after init lkdtm: Verify that '__ro_after_init' works correctly arch: Introduce post-init read-only memory x86/mm: Always enable CONFIG_DEBUG_RODATA and remove the Kconfig option mm/init: Add 'rodata=off' boot cmdline parameter to disable read-only kernel mappings asm-generic: Consolidate mark_rodata_ro()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull dma_*_writecombine rename from Ingo Molnar: "Rename dma_*_writecombine() to dma_*_wc() This is a tree-wide API rename, to move the dma_*() write-combining APIs closer in name to their usual API families. (The old API names are kept as compatibility wrappers to not introduce extra breakage.) The patch was Coccinelle generated" * 'mm-pat-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: dma, mm/pat: Rename dma_*_writecombine() to dma_*_wc()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull locking changes from Ingo Molnar: "Various updates: - Futex scalability improvements: remove page lock use for shared futex get_futex_key(), which speeds up 'perf bench futex hash' benchmarks by over 40% on a 60-core Westmere. This makes anon-mem shared futexes perform close to private futexes. (Mel Gorman) - lockdep hash collision detection and fix (Alfredo Alvarez Fernandez) - lockdep testing enhancements (Alfredo Alvarez Fernandez) - robustify lockdep init by using hlists (Andrew Morton, Andrey Ryabinin) - mutex and csd_lock micro-optimizations (Davidlohr Bueso) - small x86 barriers tweaks (Michael S Tsirkin) - qspinlock updates (Waiman Long)" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits) locking/csd_lock: Use smp_cond_acquire() in csd_lock_wait() locking/csd_lock: Explicitly inline csd_lock*() helpers futex: Replace barrier() in unqueue_me() with READ_ONCE() locking/lockdep: Detect chain_key collisions locking/lockdep: Prevent chain_key collisions tools/lib/lockdep: Fix link creation warning tools/lib/lockdep: Add tests for AA and ABBA locking tools/lib/lockdep: Add userspace version of READ_ONCE() tools/lib/lockdep: Fix the build on recent kernels locking/qspinlock: Move __ARCH_SPIN_LOCK_UNLOCKED to qspinlock_types.h locking/mutex: Allow next waiter lockless wakeup locking/pvqspinlock: Enable slowpath locking count tracking locking/qspinlock: Use smp_cond_acquire() in pending code locking/pvqspinlock: Move lock stealing count tracking code into pv_queued_spin_steal_lock() locking/mcs: Fix mcs_spin_lock() ordering futex: Remove requirement for lock_page() in get_futex_key() futex: Rename barrier references in ordering guarantees locking/atomics: Update comment about READ_ONCE() and structures locking/lockdep: Eliminate lockdep_init() locking/lockdep: Convert hash tables to hlists ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull ram resource handling changes from Ingo Molnar: "Core kernel resource handling changes to support NVDIMM error injection. This tree introduces a new I/O resource type, IORESOURCE_SYSTEM_RAM, for System RAM while keeping the current IORESOURCE_MEM type bit set for all memory-mapped ranges (including System RAM) for backward compatibility. With this resource flag it no longer takes a strcmp() loop through the resource tree to find "System RAM" resources. The new resource type is then used to extend ACPI/APEI error injection facility to also support NVDIMM" * 'core-resources-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: ACPI/EINJ: Allow memory error injection to NVDIMM resource: Kill walk_iomem_res() x86/kexec: Remove walk_iomem_res() call with GART type x86, kexec, nvdimm: Use walk_iomem_res_desc() for iomem search resource: Add walk_iomem_res_desc() memremap: Change region_intersects() to take @flags and @desc arm/samsung: Change s3c_pm_run_res() to use System RAM type resource: Change walk_system_ram() to use System RAM type drivers: Initialize resource entry to zero xen, mm: Set IORESOURCE_SYSTEM_RAM to System RAM kexec: Set IORESOURCE_SYSTEM_RAM for System RAM arch: Set IORESOURCE_SYSTEM_RAM flag for System RAM ia64: Set System RAM type and descriptor x86/e820: Set System RAM type and descriptor resource: Add I/O resource descriptor resource: Handle resource flags properly resource: Add System RAM resource type
-
- 14 3月, 2016 2 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linus由 Linus Torvalds 提交于
Pull MIPS fixes from Ralf Baechle: "Another round of MIPS fixes for 4.5: - Fix JZ4780 build with DEBUG_ZBOOT and MACH_JZ4780 - Fix build with DEBUG_ZBOOT and MACH_JZ4780 - Fix issue with uninitialised temp_foreign_map - Fix awk regex compile failure with certain versions of awk. At this time, the sole user, ld-ifversion, is only used on MIPS" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: smp.c: Fix uninitialised temp_foreign_map MIPS: Fix build error when SMP is used without GIC ld-version: Fix awk regex compile failure MIPS: Fix build with DEBUG_ZBOOT and MACH_JZ4780
-
- 13 3月, 2016 8 次提交
-
-
由 James Hogan 提交于
When calculate_cpu_foreign_map() recalculates the cpu_foreign_map cpumask it uses the local variable temp_foreign_map without initialising it to zero. Since the calculation only ever sets bits in this cpumask any existing bits at that memory location will remain set and find their way into cpu_foreign_map too. This could potentially lead to cache operations suboptimally doing smp calls to multiple VPEs in the same core, even though the VPEs share primary caches. Therefore initialise temp_foreign_map using cpumask_clear() before use. Fixes: cccf34e9 ("MIPS: c-r4k: Fix cache flushing for MT cores") Signed-off-by: NJames Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12759/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Hauke Mehrtens 提交于
The MIPS_GIC_IPI should only be selected when MIPS_GIC is also selected, otherwise it results in a compile error. smp-gic.c uses some functions from include/linux/irqchip/mips-gic.h like plat_ipi_call_int_xlate() which are only added to the header file when MIPS_GIC is set. The Lantiq SoC does not use the GIC, but supports SMP. The calls top the functions from smp-gic.c are already protected by some #ifdefs The first part of this was introduced in commit 72e20142 ("MIPS: Move GIC IPI functions out of smp-cmp.c") Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de> Cc: Paul Burton <paul.burton@imgtec.com> Cc: stable@vger.kernel.org # v3.15+ Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12774/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 James Hogan 提交于
The ld-version.sh script fails on some versions of awk with the following error, resulting in build failures for MIPS: awk: scripts/ld-version.sh: line 4: regular expression compile failed (missing '(') This is due to the regular expression ".*)", meant to strip off the beginning of the ld version string up to the close bracket, however brackets have a meaning in regular expressions, so lets escape it so that awk doesn't expect a corresponding open bracket. Fixes: ccbef167 ("Kbuild, lto: add ld-version and ld-ifversion ...") Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NJames Hogan <james.hogan@imgtec.com> Tested-by: NMichael S. Tsirkin <mst@redhat.com> Acked-by: NMichael S. Tsirkin <mst@redhat.com> Tested-by: NSudip Mukherjee <sudip.mukherjee@codethink.co.uk> Cc: Michal Marek <mmarek@suse.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: linux-mips@linux-mips.org Cc: linux-kbuild@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org # 4.4.x- Patchwork: https://patchwork.linux-mips.org/patch/12838/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Aaro Koskinen 提交于
Ingenic SoC declares ZBOOT support, but debug definitions are missing for MACH_JZ4780 resulting in a build failure when DEBUG_ZBOOT is set. The UART addresses are same as with JZ4740, so fix by covering JZ4780 with those as well. Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12830/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull block merge fix from Jens Axboe. This fixes the block segment counting bug and resulting sg overrun reported by Kent Overstreet, introduced with the last block pull. * 'for-linus' of git://git.kernel.dk/linux-block: block: don't optimize for non-cloned bio in bio_get_last_bvec()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Ingo Molnar: "This fixes 3 FPU handling related bugs, an EFI boot crash and a runtime warning. The EFI fix arrived late but I didn't want to delay it to after v4.5 because the effects are pretty bad for the systems that are affected by it" [ Actually, I don't think the EFI fix really matters yet, because we haven't switched to the separate EFI page tables in mainline yet ] * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/efi: Fix boot crash by always mapping boot service regions into new EFI page tables x86/fpu: Fix eager-FPU handling on legacy FPU machines x86/delay: Avoid preemptible context checks in delay_mwaitx() x86/fpu: Revert ("x86/fpu: Disable AVX when eagerfpu is off") x86/fpu: Fix 'no387' regression
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending由 Linus Torvalds 提交于
Pull SCSI target bug fix from Nicholas Bellinger: "Here is an outstanding target-core bug-fix for v4.5 code." This patch addresses a recent Task Management (TMR) regression related to larger set of multi-port LUN_RESET bug-fixes in v4.5-rc5. It drops a left-over target_put_sess_cmd() of se_cmd->cmd_kref within ABORT_TASK failure path, once a se_cmd descriptor has already completed posting response to fabric driver logic, and must be skipped during normal ABORT_TASK se_cmd->tag lookup" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target: Drop incorrect ABORT_TASK put for completed commands
-
由 Ming Lei 提交于
For !BIO_CLONED bio, we can use .bi_vcnt safely, but it doesn't mean we can just simply return .bi_io_vec[.bi_vcnt - 1] because the start postion may have been moved in the middle of the bvec, such as splitting in the middle of bvec. Fixes: 7bcd79ac(block: bio: introduce helpers to get the 1st and last bvec) Cc: stable@vger.kernel.org Reported-by: NKent Overstreet <kent.overstreet@gmail.com> Signed-off-by: NMing Lei <ming.lei@canonical.com> Signed-off-by: NJens Axboe <axboe@fb.com>
-
- 12 3月, 2016 12 次提交
-
-
由 Matt Fleming 提交于
Some machines have EFI regions in page zero (physical address 0x00000000) and historically that region has been added to the e820 map via trim_bios_range(), and ultimately mapped into the kernel page tables. It was not mapped via efi_map_regions() as one would expect. Alexis reports that with the new separate EFI page tables some boot services regions, such as page zero, are not mapped. This triggers an oops during the SetVirtualAddressMap() runtime call. For the EFI boot services quirk on x86 we need to memblock_reserve() boot services regions until after SetVirtualAddressMap(). Doing that while respecting the ownership of regions that may have already been reserved by the kernel was the motivation behind this commit: 7d68dc3f ("x86, efi: Do not reserve boot services regions within reserved areas") That patch was merged at a time when the EFI runtime virtual mappings were inserted into the kernel page tables as described above, and the trick of setting ->numpages (and hence the region size) to zero to track regions that should not be freed in efi_free_boot_services() meant that we never mapped those regions in efi_map_regions(). Instead we were relying solely on the existing kernel mappings. Now that we have separate page tables we need to make sure the EFI boot services regions are mapped correctly, even if someone else has already called memblock_reserve(). Instead of stashing a tag in ->numpages, set the EFI_MEMORY_RUNTIME bit of ->attribute. Since it generally makes no sense to mark a boot services region as required at runtime, it's pretty much guaranteed the firmware will not have already set this bit. For the record, the specific circumstances under which Alexis triggered this bug was that an EFI runtime driver on his machine was responding to the EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGE event during SetVirtualAddressMap(). The event handler for this driver looks like this, sub rsp,0x28 lea rdx,[rip+0x2445] # 0xaa948720 mov ecx,0x4 call func_aa9447c0 ; call to ConvertPointer(4, & 0xaa948720) mov r11,QWORD PTR [rip+0x2434] # 0xaa948720 xor eax,eax mov BYTE PTR [r11+0x1],0x1 add rsp,0x28 ret Which is pretty typical code for an EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGE handler. The "mov r11, QWORD PTR [rip+0x2424]" was the faulting instruction because ConvertPointer() was being called to convert the address 0x0000000000000000, which when converted is left unchanged and remains 0x0000000000000000. The output of the oops trace gave the impression of a standard NULL pointer dereference bug, but because we're accessing physical addresses during ConvertPointer(), it wasn't. EFI boot services code is stored at that address on Alexis' machine. Reported-by: NAlexis Murzeau <amurzeau@gmail.com> Signed-off-by: NMatt Fleming <matt@codeblueprint.co.uk> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Raphael Hertzog <hertzog@debian.org> Cc: Roger Shimizu <rogershimizu@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/1457695163-29632-2-git-send-email-matt@codeblueprint.co.uk Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=815125Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Borislav Petkov 提交于
i486 derived cores like Intel Quark support only the very old, legacy x87 FPU (FSAVE/FRSTOR, CPUID bit FXSR is not set), and our FPU code wasn't handling the saving and restoring there properly in the 'eagerfpu' case. So after we made eagerfpu the default for all CPU types: 58122bf1 x86/fpu: Default eagerfpu=on on all CPUs these old FPU designs broke. First, Andy Shevchenko reported a splat: WARNING: CPU: 0 PID: 823 at arch/x86/include/asm/fpu/internal.h:163 fpu__clear+0x8c/0x160 which was us trying to execute FXRSTOR on those machines even though they don't support it. After taking care of that, Bryan O'Donoghue reported that a simple FPU test still failed because we weren't initializing the FPU state properly on those machines. Take care of all that. Reported-and-tested-by: NBryan O'Donoghue <pure.logic@nexus-software.ie> Reported-by: NAndy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: NBorislav Petkov <bp@suse.de> Acked-by: NLinus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yu-cheng <yu-cheng.yu@intel.com> Link: http://lkml.kernel.org/r/20160311113206.GD4312@pd.tnicSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
git://git.infradead.org/linux-mtd由 Linus Torvalds 提交于
Pull MTD fixes from Brian Norris: "Late MTD fix for v4.5: - A simple error code handling fix for the NAND ECC test; this was a regression in v4.5-rc1 - A MAINTAINERS update, which might as well go in ASAP" * tag 'for-linus-20160311' of git://git.infradead.org/linux-mtd: MAINTAINERS: add a maintainer for the NAND subsystem mtd: nand: tests: fix regression introduced in mtd_nandectest
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm/i915 fixes from Dave Airlie: "Just two i915 regression fixes, that should be it from me" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/i915: Actually retry with bit-banging after GMBUS timeout drm/i915: Fix bogus dig_port_map[] assignment for pre-HSW
-
由 Matthew Dawson 提交于
When removing an element from the mempool, mark it as unpoisoned in KASAN before verifying its contents for SLUB/SLAB debugging. Otherwise KASAN will flag the reads checking the element use-after-free writes as use-after-free reads. Signed-off-by: NMatthew Dawson <matthew@mjdsystems.ca> Acked-by: NAndrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC fixes from Olof Johansson: "Two more fixes for 4.5: - One is a fix for OMAP that is urgently needed to avoid DRA7xx chips from premature aging, by always keeping the Ethernet clock enabled. - The other solves a I/O memory layout issue on Armada, where SROM and PCI memory windows were conflicting in some configurations" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: mvebu: fix overlap of Crypto SRAM with PCIe memory window ARM: dts: dra7: do not gate cpsw clock due to errata i877 ARM: OMAP2+: hwmod: Introduce ti,no-idle dt property
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media由 Linus Torvalds 提交于
Pull media fix from Mauro Carvalho Chehab: "One last time fix: It adds a code that prevents some media tools like media-ctl to hide some entities that have their IDs out of the range expected by those apps" * tag 'media/v4.5-5' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] media-device: map new functions into old types for legacy API
-
由 Thomas Petazzoni 提交于
When the Crypto SRAM mappings were added to the Device Tree files describing the Armada XP boards in commit c466d997 ("ARM: mvebu: define crypto SRAM ranges for all armada-xp boards"), the fact that those mappings were overlaping with the PCIe memory aperture was overlooked. Due to this, we currently have for all Armada XP platforms a situation that looks like this: Memory mapping on Armada XP boards with internal registers at 0xf1000000: - 0x00000000 -> 0xf0000000 3.75G RAM - 0xf0000000 -> 0xf1000000 16M NOR flashes (AXP GP / AXP DB) - 0xf1000000 -> 0xf1100000 1M internal registers - 0xf8000000 -> 0xffe0000 126M PCIe memory aperture - 0xf8100000 -> 0xf8110000 64KB Crypto SRAM #0 => OVERLAPS WITH PCIE ! - 0xf8110000 -> 0xf8120000 64KB Crypto SRAM #1 => OVERLAPS WITH PCIE ! - 0xffe00000 -> 0xfff00000 1M PCIe I/O aperture - 0xfff0000 -> 0xffffffff 1M BootROM The overlap means that when PCIe devices are added, depending on their memory window needs, they might or might not be mapped into the physical address space. Indeed, they will not be mapped if the area allocated in the PCIe memory aperture by the PCI core overlaps with one of the Crypto SRAM. Typically, a Intel IGB PCIe NIC that needs 8MB of PCIe memory will see its PCIe memory window allocated from 0xf80000000 for 8MB, which overlaps with the Crypto SRAM windows. Due to this, the PCIe window is not created, and any attempt to access the PCIe window makes the kernel explode: [ 3.302213] igb: Copyright (c) 2007-2014 Intel Corporation. [ 3.307841] pci 0000:00:09.0: enabling device (0140 -> 0143) [ 3.313539] mvebu_mbus: cannot add window '4:f8', conflicts with another window [ 3.320870] mvebu-pcie soc:pcie-controller: Could not create MBus window at [mem 0xf8000000-0xf87fffff]: -22 [ 3.330811] Unhandled fault: external abort on non-linefetch (0x1008) at 0xf08c0018 This problem does not occur on Armada 370 boards, because we use the following memory mapping (for boards that have internal registers at 0xf1000000): - 0x00000000 -> 0xf0000000 3.75G RAM - 0xf0000000 -> 0xf1000000 16M NOR flashes (AXP GP / AXP DB) - 0xf1000000 -> 0xf1100000 1M internal registers - 0xf1100000 -> 0xf1110000 64KB Crypto SRAM #0 => OK ! - 0xf8000000 -> 0xffe0000 126M PCIe memory - 0xffe00000 -> 0xfff00000 1M PCIe I/O - 0xfff0000 -> 0xffffffff 1M BootROM Obviously, the solution is to align the location of the Crypto SRAM mappings of Armada XP to be similar with the ones on Armada 370, i.e have them between the "internal registers" area and the beginning of the PCIe aperture. However, we have a special case with the OpenBlocks AX3-4 platform, which has a 128 MB NOR flash. Currently, this NOR flash is mapped from 0xf0000000 to 0xf8000000. This is possible because on OpenBlocks AX3-4, the internal registers are not at 0xf1000000. And this explains why the Crypto SRAM mappings were not configured at the same place on Armada XP. Hence, the solution is two-fold: (1) Move the NOR flash mapping on Armada XP OpenBlocks AX3-4 from 0xe8000000 to 0xf0000000. This frees the 0xf0000000 -> 0xf80000000 space. (2) Move the Crypto SRAM mappings on Armada XP to be similar to Armada 370 (except of course that Armada XP has two Crypto SRAM and not one). After this patch, the memory mapping on Armada XP boards with registers at 0xf1 is: - 0x00000000 -> 0xf0000000 3.75G RAM - 0xf0000000 -> 0xf1000000 16M NOR flashes (AXP GP / AXP DB) - 0xf1000000 -> 0xf1100000 1M internal registers - 0xf1100000 -> 0xf1110000 64KB Crypto SRAM #0 - 0xf1110000 -> 0xf1120000 64KB Crypto SRAM #1 - 0xf8000000 -> 0xffe0000 126M PCIe memory - 0xffe00000 -> 0xfff00000 1M PCIe I/O - 0xfff0000 -> 0xffffffff 1M BootROM And the memory mapping for the special case of the OpenBlocks AX3-4 (internal registers at 0xd0000000, NOR of 128 MB): - 0x00000000 -> 0xc0000000 3G RAM - 0xd0000000 -> 0xd1000000 1M internal registers - 0xe800000 -> 0xf0000000 128M NOR flash - 0xf1100000 -> 0xf1110000 64KB Crypto SRAM #0 - 0xf1110000 -> 0xf1120000 64KB Crypto SRAM #1 - 0xf8000000 -> 0xffe0000 126M PCIe memory - 0xffe00000 -> 0xfff00000 1M PCIe I/O - 0xfff0000 -> 0xffffffff 1M BootROM Fixes: c466d997 ("ARM: mvebu: define crypto SRAM ranges for all armada-xp boards") Reported-by: NPhil Sutter <phil@nwl.cc> Cc: Phil Sutter <phil@nwl.cc> Cc: <stable@vger.kernel.org> Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: NGregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
git://git.infradead.org/users/vkoul/slave-dma由 Linus Torvalds 提交于
Pull dmaengine fixes from Vinod Koul: "Two fixes showed up in last few days, and they should be included in 4.5. Summary: Two more late fixes to drivers, nothing major here: - A memory leak fix in fsdma unmap the dma descriptors on freeup - A fix in xdmac driver for residue calculation of dma descriptor" * tag 'dmaengine-fix-4.5' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: at_xdmac: fix residue computation dmaengine: fsldma: fix memory leak
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull power management and ACPI fixes from Rafael Wysocki: "Two more fixes for issues introduced recently, one in the generic device properties framework and one in ACPICA. Specifics: - Revert a recent ACPICA commit that has been reverted upstream, because it caused problems to happen on user systems and the problem it attempted to address will not be relevant any more after upcoming ACPI specification changes (Bob Moore). - Fix crash in the generic device properties framework introduced by a recent change that forgot to check pointers against error values in addition to checking them against NULL (Heikki Krogerus)" * tag 'pm+acpi-4.5-final' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: device property: fwnode->secondary may contain ERR_PTR(-ENODEV) ACPICA: Revert "Parser: Fix for SuperName method invocation"
-
git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs由 Linus Torvalds 提交于
Pull xfs fixes from Dave Chinner: "This is a fix for a regression introduced in 4.5-rc1 by the new torn log write detection code. The regression only affects people moving a clean filesystem between machines/kernels of different architecture (such as changing between 32 bit and 64 bit kernels), but this is the recommended (and only!) safe way to migrate a filesystem between architectures so we really need to ensure it works. The changes are larger than I'd prefer right at the end of the release cycle, but the majority of the change is just factoring code to enable the detection of a clean log at the correct time to avoid this issue. Changes: - Only perform torn log write detection on dirty logs. This prevents failures being detected due to a clean filesystem being moved between machines or kernels of different architectures (e.g. 32 -> 64 bit, BE -> LE, etc). This fixes a regression introduced by the torn log write detection in 4.5-rc1" * tag 'xfs-for-linus-4.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: xfs: only run torn log write detection on dirty logs xfs: refactor in-core log state update to helper xfs: refactor unmount record detection into helper xfs: separate log head record discovery from verification
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull vfs fixes from Al Viro: "A couple of fixes: Fix for my dumb braino in ncpfs and a long-standing breakage on recovery from failed rename() in jffs2" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: jffs2: reduce the breakage on recovery from halfway failed rename() ncpfs: fix a braino in OOM handling in ncp_fill_cache()
-
- 11 3月, 2016 9 次提交
-
-
由 Rafael J. Wysocki 提交于
* device-properties-fixes: device property: fwnode->secondary may contain ERR_PTR(-ENODEV) * acpica-fixes: ACPICA: Revert "Parser: Fix for SuperName method invocation"
-
由 Ingo Molnar 提交于
Merge tag 'perf-core-for-mingo-20160310' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: User visible changes: - Implement 'perf stat --metric-only' (Andi Kleen) - Fix perf script python database export crash (Chris Phlipot) Infrastructure changes: - perf top/report --hierarchy assorted fixes for problems introduced in this perf/core cycle (Namhyung Kim) - Support '~' operation in libtraceevent (Steven Rosted) Build fixes: - Fix bulding of jitdump on opensuse on ubuntu systems when the DWARF devel files are not installed (Arnaldo Carvalho de Melo) - Do not try building jitdump on unsupported arches (Jiri Olsa) Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Ville Syrjälä 提交于
After the GMBUS transfer times out, we set force_bit=1 and return -EAGAIN expecting the i2c core to call the .master_xfer hook again so that we will retry the same transfer via bit-banging. This is in case the gmbus hardware is somehow faulty. Unfortunately we left adapter->retries to 0, meaning the i2c core didn't actually do the retry. Let's tell the core we want one retry when we return -EAGAIN. Note that i2c-algo-bit also uses this retry count for some internal retries, so we'll end up increasing those a bit as well. Cc: Jani Nikula <jani.nikula@intel.com> Cc: drm-intel-fixes@lists.freedesktop.org Fixes: bffce907 ("drm/i915: abstract i2c bit banging fallback in gmbus xfer") Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1457366220-29409-2-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NJani Nikula <jani.nikula@intel.com> (cherry picked from commit 8b1f165a) Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
由 Andi Kleen 提交于
Add metric only support for -A too. This requires a new print function that prints the metrics in the right order. v2: Fix manpage v3: Simplify nrcpus computation Signed-off-by: NAndi Kleen <ak@linux.intel.com> Acked-by: NJiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/1457049458-28956-7-git-send-email-andi@firstfloor.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Andi Kleen 提交于
Add a new mode to only print metrics. Sometimes we don't care about the raw values, just want the computed metrics. This allows more compact printing, so with -I each sample is only a single line. This also allows easier plotting and processing with other tools. The main target is with using --topdown, but it also works with -T and standard perf stat. A few metrics are not supported. To avoiding having to hardcode all the metrics in the code it uses a two pass approach: first compute dummy metrics and only print the headers in the print_metric callback. Then use the callback to print the actual values. There are some additional changes in the stat printout code to handle all metrics being on a single line. One issue is that the column code doesn't know in advance what events are not supported by the CPU, and it would be hard to find out as this could change based on dynamic conditions. That causes empty columns in some cases. The output can be fairly wide, often you may need more than 80 columns. Example: % perf stat -a -I 1000 --metric-only 1.001452803 frontend cycles idle insn per cycle stalled cycles per insn branch-misses of all branches 1.001452803 158.91% 0.66 2.39 2.92% 2.002192321 180.63% 0.76 2.08 2.96% 3.003088282 150.59% 0.62 2.57 2.84% 4.004369835 196.20% 0.98 1.62 3.79% 5.005227314 231.98% 0.84 1.90 4.71% v2: Lots of updates. v3: Use slightly narrower columns v4: Add comment Signed-off-by: NAndi Kleen <ak@linux.intel.com> Acked-by: NJiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/1457049458-28956-6-git-send-email-andi@firstfloor.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Andi Kleen 提交于
With all the recently added fields in the perf stat CSV output we should finally document them in the man page. Do this here. v2: Fix fields in documentation (Jiri) v3: fix order of fields again (Jiri) v4: Change order again. v5: Document more fields (Jiri) v6: Move time stamp first v7: More fixes (Jiri) Signed-off-by: NAndi Kleen <ak@linux.intel.com> Acked-by: NJiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/1457049458-28956-5-git-send-email-andi@firstfloor.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Namhyung Kim 提交于
The context menu in TUI hists browser checks corresponding sort keys when creating the menu item. But hotkey actions lacks these checks so it can filter using incorrect info. For example, default sort key of 'perf top' doesn't contain 'comm' or 'pid' sort key so each hist entry's thread info is not reliable. Thus it should prohibit using thread filter on 't' key. Signed-off-by: NNamhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1457533253-21419-3-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Namhyung Kim 提交于
The commit 2eafd410 ("perf hists browser: Only 'Zoom into thread' only when sort order has 'pid'") disabled thread filtering in hist browser for the default sort key. However the he->thread is still valid even if 'pid' sort key is not given. Only thing it should not use is the pid (or tid) of the thread. So allow to filter by thread when 'comm' sort key is given and show pid only if 'pid' sort key is given. Signed-off-by: NNamhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1457536490-24084-1-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Namhyung Kim 提交于
The sort__has_comm variable is to check whether the comm sort key is given. This is necessary to support thread filtering in the TUI hists browser later. Signed-off-by: NNamhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1457533253-21419-1-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-