Pull SELinux updates from Paul Moore:
 "SELinux is back with a quiet pull request for v4.18. Three patches,
  all small: two cleanups of the SELinux audit records, and one to
  migrate to a newly defined type (vm_fault_t).

  Everything passes our test suite, and as of about five minutes ago it
  merged cleanly with your tree"

* tag 'selinux-pr-20180605' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  audit: normalize MAC_POLICY_LOAD record
  audit: normalize MAC_STATUS record
  security: selinux: Change return type to vm_fault_t

Pull security system updates from James Morris:

 - incorporate new socketpair() hook into LSM and wire up the SELinux
   and Smack modules. From David Herrmann:

     "The idea is to allow SO_PEERSEC to be called on AF_UNIX sockets
      created via socketpair(2), and return the same information as if
      you emulated socketpair(2) via a temporary listener socket.

      Right now SO_PEERSEC will return the unlabeled credentials for a
      socketpair, rather than the actual credentials of the creating
      process."

 - remove the unused security_settime LSM hook (Sargun Dhillon).

 - remove some stack allocated arrays from the keys code (Tycho
   Andersen)

* 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  dh key: get rid of stack allocated array for zeroes
  dh key: get rid of stack allocated array
  big key: get rid of stack array allocation
  smack: provide socketpair callback
  selinux: provide socketpair callback
  net: hook socketpair() into LSM
  security: add hook for socketpair()
  security: remove security_settime

Pull printk updates from Petr Mladek:

 - Help userspace log daemons to catch up with a flood of messages. They
   will get woken after each message even if the console is far behind
   and handled by another process.

 - Flush printk safe buffers safely even when panic() happens in the
   normal context.

 - Fix possible va_list reuse when race happened in printk_safe().

 - Remove %pCr printf format to prevent sleeping in the atomic context.

 - Misc vsprintf code cleanup.

* tag 'printk-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
  printk: drop in_nmi check from printk_safe_flush_on_panic()
  lib/vsprintf: Remove atomic-unsafe support for %pCr
  serial: sh-sci: Stop using printk format %pCr
  thermal: bcm2835: Stop using printk format %pCr
  clk: renesas: cpg-mssr: Stop using printk format %pCr
  printk: fix possible reuse of va_list variable
  printk: wake up klogd in vprintk_emit
  vsprintf: Tweak pF/pf comment
  lib/vsprintf: Mark expected switch fall-through
  lib/vsprintf: Replace space with '_' before crng is ready
  lib/vsprintf: Deduplicate pointer_string()
  lib/vsprintf: Move pointer_string() upper
  lib/vsprintf: Make flag_spec global
  lib/vsprintf: Make strspec global
  lib/vsprintf: Make dec_spec global
  lib/test_printf: Mark big constant with UL

Pull IPMI updates from Corey Minyard:
 "It's been a busy release for the IPMI driver. Some notable changes:

   - A user was running into timeout issues doing maintenance commands
     over the IPMB network behind an IPMI controller.

     Extend the maintenance mode concept to messages over IPMB and allow
     the timeouts to be tuned.

   - Lots of cleanup, style fixing, some bugfixes, and such.

   - At least one user was having trouble with the way the IPMI driver
     would lock the i2c driver module it used.

     The IPMI driver was not designed for hotplug. However, hotplug is a
     reality now, so the IPMI driver was modified to support hotplug.

   - The proc interface code is now completely removed. Long live sysfs!"

* tag 'for-linus-4.18' of git://github.com/cminyard/linux-ipmi: (35 commits)
  ipmi: Properly release srcu locks on error conditions
  ipmi: NPCM7xx KCS BMC: enable interrupt to the host
  ipmi:bt: Set the timeout before doing a capabilities check
  ipmi: Remove the proc interface
  ipmi_ssif: Fix uninitialized variable issue
  ipmi: add an NPCM7xx KCS BMC driver
  ipmi_si: Clean up shutdown a bit
  ipmi_si: Rename intf_num to si_num
  ipmi: Remove smi->intf checks
  ipmi_ssif: Get rid of unused intf_num
  ipmi: Get rid of ipmi_user_t and ipmi_smi_t in include files
  ipmi: ipmi_unregister_smi() cannot fail, have it return void
  ipmi_devintf: Add an error return on invalid ioctls
  ipmi: Remove usecount function from interfaces
  ipmi_ssif: Remove usecount handling
  ipmi: Remove condition on interface shutdown
  ipmi_ssif: Convert over to a shutdown handler
  ipmi_si: Convert over to a shutdown handler
  ipmi: Rework locking and shutdown for hot remove
  ipmi: Fix some counter issues
  ...

Pull EDAC updates from Borislav Petkov:

 - Stratix10 SDRAM support to altera_edac (Thor Thayer)

 - the usual misc fixes all over the place

[ Also, shared branch for socfpga_stratix10.dtsi file changes with the
  socfpga tree ]

* tag 'edac_for_4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  EDAC, ghes: Make platform-based whitelisting x86-only
  EDAC, altera: Fix ARM64 build warning
  EDAC, skx: Fix skx_edac build error when ACPI_NFIT=m
  EDAC, ghes: Use BIT() macro
  EDAC, ghes: Add DDR4 and NVDIMM memory types
  EDAC, altera: Handle SDRAM Uncorrectable Errors on Stratix10
  Documentation: dt: edac: Move Altera SOCFPGA EDAC file
  EDAC, altera: Add support for Stratix10 SDRAM EDAC
  Documentation: dt: socfpga: Add Stratix10 ECC Manager binding
  EDAC, ghes: Remove unused argument to ghes_edac_report_mem_error()
  arm64: dts: stratix10: add sdram ecc
  EDAC, i7core: Fix spelling mistake: "redundacy" -> "redundancy"
  EDAC, ghes: Add a null pointer check in ghes_edac_unregister()
  ghes, EDAC: Fix ghes_edac registration
  arm64: dts: stratix10: Change pad skew values for EMAC0 PHY driver
  ARM: dts: consistently use 'atmel' as at24 manufacturer in cyclone5
  arm64: dts: stratix10: Add PL330 DMAC to Stratix10 dts
  arm64: dts: stratix10: enable i2c, add i2c periperals
  arm64: dts: stratix10: use clock bindings for the Stratix10 platform

Pull ARM updates from Russell King:

 - Initial round of Spectre variant 1 and variant 2 fixes for 32-bit ARM

 - Clang support improvements

 - nommu updates for v8 MPU

 - enable ARM_MODULE_PLTS by default to avoid problems loading modules
   with larger kernels

 - vmlinux.lds and dma-mapping cleanups

* 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (31 commits)
  ARM: spectre-v1: fix syscall entry
  ARM: spectre-v1: add array_index_mask_nospec() implementation
  ARM: spectre-v1: add speculation barrier (csdb) macros
  ARM: KVM: report support for SMCCC_ARCH_WORKAROUND_1
  ARM: KVM: Add SMCCC_ARCH_WORKAROUND_1 fast handling
  ARM: spectre-v2: KVM: invalidate icache on guest exit for Brahma B15
  ARM: KVM: invalidate icache on guest exit for Cortex-A15
  ARM: KVM: invalidate BTB on guest exit for Cortex-A12/A17
  ARM: spectre-v2: warn about incorrect context switching functions
  ARM: spectre-v2: add firmware based hardening
  ARM: spectre-v2: harden user aborts in kernel space
  ARM: spectre-v2: add Cortex A8 and A15 validation of the IBE bit
  ARM: spectre-v2: harden branch predictor on context switches
  ARM: spectre: add Kconfig symbol for CPUs vulnerable to Spectre
  ARM: bugs: add support for per-processor bug checking
  ARM: bugs: hook processor bug checking into SMP and suspend paths
  ARM: bugs: prepare processor bug infrastructure
  ARM: add more CPU part numbers for Cortex and Brahma B15 CPUs
  ARM: 8774/1: remove no-op macro VMLINUX_SYMBOL()
  ARM: 8773/1: amba: Export amba_bustype
  ...

Merge tag 'linux-kselftest-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kselftest update from Shuah Khan:

 - Work to restructure timers test suite to move PIE out of rtctest from
   Alexandre Belloni.

 - Several minor spelling and bug fixes.

 - New cgroup tests from Roman Gushchin and Mike Rapoport.

 - Kselftest framework changes to handle and report skipped tests
   correctly.

   Prior to these changes, framework treated all non-zero return codes
   from tests as failures. When tests are skipped with non-zero return
   code, due to unmet dependencies and/or unsupported configuration,
   reporting them as failed lead to false negatives on the tests that
   couldn't be run.

 - Fixes to test Makefiles to remove unnecessary RUN_TESTS and
   EMIT_TESTS overrides and use common defines from lib.mk.

 - Fixes to several tests to return correct Kselftest skip code.

 - Changes to improve test output.

* tag 'linux-kselftest-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (55 commits)
  selftests: lib: fix prime_numbers module search and skip logic
  selftests: intel_pstate: notification about privilege required to run intel_pstate testing script
  selftests: cgroup/memcontrol: add basic test for socket accounting
  selftest: intel_pstate: debug support message from aperf.c and return value
  kselftest/cgroup: fix variable dereferenced before check warning
  selftests/intel_pstate: Enhance table printing
  selftests/intel_pstate: Improve test, minor fixes
  selftests: cgroup/memcontrol: add basic test for swap controls
  selftests: cgroup: add memory controller self-tests
  selftests: memfd: split regular and hugetlbfs tests
  selftests: net: return Kselftest Skip code for skipped tests
  selftests: mqueue: return Kselftest Skip code for skipped tests
  selftests: memory-hotplug: return Kselftest Skip code for skipped tests
  selftests: memfd: return Kselftest Skip code for skipped tests
  selftests: membarrier: return Kselftest Skip code for skipped tests
  selftests: media_tests: return Kselftest Skip code for skipped tests
  selftests: locking: return Kselftest Skip code for skipped tests
  selftests: locking: add Makefile for locking test
  selftests: lib: return Kselftest Skip code for skipped tests
  selftests: lib: add prime_numbers.sh test to Makefile
  ...

Pull Kconfig updates from Masahiro Yamada:
 "Kconfig now supports new functionality to perform textual
  substitution. It has been a while since Linus suggested to move
  compiler option tests from makefiles to Kconfig. Finally, here it is.

  The implementation has been generalized into a Make-like macro
  language.

  Some built-in functions such as 'shell' are provided. Variables and
  user-defined functions are also supported so that 'cc-option',
  'ld-option', etc. are implemented as macros.

  Summary:

   - refactor package checks for building {m,n,q,g}conf

   - remove unused/unmaintained localization support

   - remove Kbuild cache

   - drop CONFIG_CROSS_COMPILE support

   - replace 'option env=' with direct variable expansion

   - add built-in functions such as 'shell'

   - support variables and user-defined functions

   - add helper macros as as 'cc-option'

   - add unit tests and a document of the new macro language

   - add 'testconfig' to help

   - fix warnings from GCC 8.1"

* tag 'kconfig-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (30 commits)
  kconfig: Avoid format overflow warning from GCC 8.1
  kbuild: Move last word of nconfig help to the previous line
  kconfig: Add testconfig into make help output
  kconfig: add basic helper macros to scripts/Kconfig.include
  kconfig: show compiler version text in the top comment
  kconfig: test: add Kconfig macro language tests
  Documentation: kconfig: document a new Kconfig macro language
  kconfig: error out if a recursive variable references itself
  kconfig: add 'filename' and 'lineno' built-in variables
  kconfig: add 'info', 'warning-if', and 'error-if' built-in functions
  kconfig: expand lefthand side of assignment statement
  kconfig: support append assignment operator
  kconfig: support simply expanded variable
  kconfig: support user-defined function and recursively expanded variable
  kconfig: begin PARAM state only when seeing a command keyword
  kconfig: replace $(UNAME_RELEASE) with function call
  kconfig: add 'shell' built-in function
  kconfig: add built-in function support
  kconfig: make default prompt of mainmenu less specific
  kconfig: remove sym_expand_string_value()
  ...

Pull Kbuild updates from Masahiro Yamada:

 - improve fixdep to coalesce consecutive slashes in dep-files

 - fix some issues of the maintainer string generation in deb-pkg script

 - remove unused CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX and clean-up
   several tools and linker scripts

 - clean-up modpost

 - allow to enable the dead code/data elimination for PowerPC in EXPERT
   mode

 - improve two coccinelle scripts for better performance

 - pass endianness and machine size flags to sparse for all architecture

 - misc fixes

* tag 'kbuild-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (25 commits)
  kbuild: add machine size to CHECKFLAGS
  kbuild: add endianness flag to CHEKCFLAGS
  kbuild: $(CHECK) doesnt need NOSTDINC_FLAGS twice
  scripts: Fixed printf format mismatch
  scripts/tags.sh: use `find` for $ALLSOURCE_ARCHS generation
  coccinelle: deref_null: improve performance
  coccinelle: mini_lock: improve performance
  powerpc: Allow LD_DEAD_CODE_DATA_ELIMINATION to be selected
  kbuild: Allow LD_DEAD_CODE_DATA_ELIMINATION to be selectable if enabled
  kbuild: LD_DEAD_CODE_DATA_ELIMINATION no -ffunction-sections/-fdata-sections for module build
  kbuild: Fix asm-generic/vmlinux.lds.h for LD_DEAD_CODE_DATA_ELIMINATION
  modpost: constify *modname function argument where possible
  modpost: remove redundant is_vmlinux() test
  modpost: use strstarts() helper more widely
  modpost: pass struct elf_info pointer to get_modinfo()
  checkpatch: remove VMLINUX_SYMBOL() check
  vmlinux.lds.h: remove no-op macro VMLINUX_SYMBOL()
  kbuild: remove CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX
  export.h: remove code for prefixing symbols with underscore
  depmod.sh: remove symbol prefix support
  ...

Pull sound updates from Takashi Iwai:
 "We've got many code additions at this cycle as a result of quite a few
  new drivers. Below are highlights:

  Core stuff:
   - Fix the long-standing issue with the device registration order; the
     control device is now registered at last
   - PCM locking code cleanups for RT kernels
   - Fixes for possible races in ALSA timer resolution accesses
   - TLV offset definitions in uapi

  ASoC:
   - Many fixes for the topology stuff, including fixes for v4 ABI
     compatibility
   - Lots of cleanups / quirks for Intel platforms based on Realtek
     CODECs
   - Continued componentization works, removing legacy CODEC stuff
   - Conversion of OMAP DMA to the new, more standard SDMA-PCM driver
   - Fixes and updates to Cirrus Logic SoC drivers
   - New Qualcomm DSP support
   - New drivers for Analog SSM2305, Atmel I2S controllers, Mediatek
     MT6351, MT6797 and MT7622, Qualcomm DSPs, Realtek RT1305, RT1306
     and RT5668 and TI TSCS454

  HD-audio:
   - Finally better support for some CA0132 boards, allowing Windows
     firmware
   - HP Spectre x360 support along with a bulk of COEF stuff
   - Blacklisting power save default some known boards reported on
     Fedora

  USB-audio:
   - Continued improvements on UAC3 support; now BADD is supported
   - Fixes / improvements for Dell WD15 dock
   - Allow DMA coherent pages for PCM buffers for ARCH, MIPS & co

  Others:
   - New Xen sound frontend driver support
   - Cache implementation and other improvements for FireWire DICE
   - Conversions to octal permissions in allover places"

* tag 'sound-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (386 commits)
  ASoC: dapm: delete dapm_kcontrol_data paths list before freeing it
  ALSA: usb-audio: remove redundant check on err
  ASoC: topology: Move skl-tplg-interface.h to uapi
  ASoC: topology: Move v4 manifest header data structures to uapi
  ASoC: topology: Improve backwards compatibility with v4 topology files
  ALSA: pci/hda: Remove unused, broken, header file
  ASoC: TSCS454: Add Support
  ASoC: Intel: kbl: Move codec sysclk config to codec_init function
  ASoC: simple-card: set cpu dai clk in hw_params
  ALSA: hda - Handle kzalloc() failure in snd_hda_attach_pcm_stream()
  ALSA: oxygen: use match_string() helper
  ASoC: dapm: use match_string() helper
  ASoC: max98095: use match_string() helper
  ASoC: max98088: use match_string() helper
  ASoC: Intel: bytcr_rt5651: Set card long_name based on quirks
  ASoC: mt6797-mt6351: add hostless phone call path
  ASoC: mt6797: add Hostless DAI
  ASoC: mt6797: add PCM interface
  ASoC: mediatek: export mtk-afe symbols as needed
  ASoC: codecs: PCM1789: include gpio/consumer.h
  ...

Pull drm updates from Dave Airlie:
 "This starts to support NVIDIA volta hardware with nouveau, and adds
  amdgpu support for the GPU in the Kabylake-G (the intel + radeon
  single package chip), along with some initial Intel icelake enabling.

  Summary:

  New Drivers:
   - v3d - driver for broadcom V3D V3.x+ hardware
   - xen-front - XEN PV display frontend

  core:
   - handle zpos normalization in the core
   - stop looking at legacy pointers in atomic paths
   - improved scheduler documentation
   - improved aspect ratio validation
   - aspect ratio support for 64:27 and 256:135
   - drop unused control node code.

  i915:
   - Icelake (ICL) enabling
   - GuC/HuC refactoring
   - PSR/PSR2 enabling and fixes
   - DPLL management refactoring
   - DP MST fixes
   - NV12 enabling
   - HDCP improvements
   - GEM/Execlist/reset improvements
   - GVT improvements
   - stolen memory first 4k fix

  amdgpu:
   - Vega 20 support
   - VEGAM support (Kabylake-G)
   - preOS scanout buffer reservation
   - power management gfxoff support for raven
   - SR-IOV fixes
   - Vega10 power profiles and clock voltage control
   - scatter/gather display support on CZ/ST

  amdkfd:
   - GFX9 dGPU support
   - userptr memory mapping

  nouveau:
   - major refactoring for Volta GV100 support

  tda998x:
   - HDMI i2c CEC support

  etnaviv:
   - removed unused logging code
   - license text cleanups
   - MMU handling improvements
   - timeout fence fix for 50 days uptime

  tegra:
   - IOMMU support in gr2d/gr3d drivers
   - zpos support

  vc4:
   - syncobj support
   - CTM, plane alpha and async cursor support

  analogix_dp:
   - HPD and aux chan fixes

  sun4i:
   - MIPI DSI support

  tilcdc:
   - clock divider fixes for OMAP-l138 LCDK board

  rcar-du:
   - R8A77965 support
   - dma-buf fences fixes
   - hardware indexed crtc/du group handling
   - generic zplane property support

  atmel-hclcdc:
   - generic zplane property support

  mediatek:
   - use generic video mode function

  exynos:
   - S5PV210 FIMD variant support
   - IPP v2 framework
   - more HW overlays support"

* tag 'drm-next-2018-06-06-1' of git://anongit.freedesktop.org/drm/drm: (1286 commits)
  drm/amdgpu: fix 32-bit build warning
  drm/exynos: fimc: signedness bug in fimc_setup_clocks()
  drm/exynos: scaler: fix static checker warning
  drm/amdgpu: Use dev_info() to report amdkfd is not supported for this ASIC
  drm/amd/display: Remove use of division operator for long longs
  drm/amdgpu: Update GFX info structure to match what vega20 used
  drm/amdgpu/pp: remove duplicate assignment
  drm/sched: add rcu_barrier after entity fini
  drm/amdgpu: move VM BOs on LRU again
  drm/amdgpu: consistenly use VM moved flag
  drm/amdgpu: kmap PDs/PTs in amdgpu_vm_update_directories
  drm/amdgpu: further optimize amdgpu_vm_handle_moved
  drm/amdgpu: cleanup amdgpu_vm_validate_pt_bos v2
  drm/amdgpu: rework VM state machine lock handling v2
  drm/amdgpu: Add runtime VCN PG support
  drm/amdgpu: Enable VCN static PG by default on RV
  drm/amdgpu: Add VCN static PG support on RV
  drm/amdgpu: Enable VCN CG by default on RV
  drm/amdgpu: Add static CG control for VCN on RV
  drm/exynos: Fix default value for zpos plane property
  ...

Pull workqueue updates from Tejun Heo:

 - make kworkers report the workqueue it is executing or has executed
   most recently in /proc/PID/comm (so they show up in ps/top)

 - CONFIG_SMP shuffle to move stuff which isn't necessary for UP builds
   inside CONFIG_SMP.

* 'for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: move function definitions within CONFIG_SMP block
  workqueue: Make sure struct worker is accessible for wq_worker_comm()
  workqueue: Show the latest workqueue name in /proc/PID/{comm,stat,status}
  proc: Consolidate task->comm formatting into proc_task_name()
  workqueue: Set worker->desc to workqueue name by default
  workqueue: Make worker_attach/detach_pool() update worker->pool
  workqueue: Replace pool->attach_mutex with global wq_pool_attach_mutex

Pull cgroup updates from Tejun Heo:

 - For cpustat, cgroup has a percpu hierarchical stat mechanism which
   propagates up the hierarchy lazily.

   This contains commits to factor out and generalize the mechanism so
   that it can be used for other cgroup stats too.

   The original intention was to update memcg stats to use it but memcg
   went for a different approach, so still the only user is cpustat. The
   factoring out and generalization still make sense and it's likely
   that this can be used for other purposes in the future.

 - cgroup uses kernfs_notify() (which uses fsnotify()) to inform user
   space of certain events. A rate limiting mechanism is added.

 - Other misc changes.

* 'for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: css_set_lock should nest inside tasklist_lock
  rdmacg: Convert to use match_string() helper
  cgroup: Make cgroup_rstat_updated() ready for root cgroup usage
  cgroup: Add memory barriers to plug cgroup_rstat_updated() race window
  cgroup: Add cgroup_subsys->css_rstat_flush()
  cgroup: Replace cgroup_rstat_mutex with a spinlock
  cgroup: Factor out and expose cgroup_rstat_*() interface functions
  cgroup: Reorganize kernel/cgroup/rstat.c
  cgroup: Distinguish base resource stat implementation from rstat
  cgroup: Rename stat to rstat
  cgroup: Rename kernel/cgroup/stat.c to kernel/cgroup/rstat.c
  cgroup: Limit event generation frequency
  cgroup: Explicitly remove core interface files

Pull libata updates from Tejun Heo:

 - libata has always been limiting the maximum queue depth to 31, with
   one entry set aside mostly for historical reasons. This didn't use to
   make much difference but Jens found out that modern hard drives can
   actually perform measurably better with the extra one queue depth.
   Jens updated libata core so that it can make use of full 32 queue
   depth

 - Damien updated command retry logic in error handling so that it
   doesn't unnecessarily retry when upper layer (SCSI) is gonna handle
   them

 - A couple misc changes

* 'for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  sata_fsl: use the right type for tag bitshift
  ahci: enable full queue depth of 32
  libata: don't clamp queue depth to ATA_MAX_QUEUE - 1
  libata: add extra internal command
  sata_nv: set host can_queue count appropriately
  libata: remove assumption that ATA_MAX_QUEUE - 1 is the max
  libata: use ata_tag_internal() consistently
  libata: bump ->qc_active to a 64-bit type
  libata: convert core and drivers to ->hw_tag usage
  libata: introduce notion of separate hardware tags
  libata: Fix command retry decision
  libata: Honor RQF_QUIET flag
  libata: Make ata_dev_set_mode() less verbose
  libata: Fix ata_err_string()
  libata: Fix comment typo in ata_eh_analyze_tf()
  sata_nv: don't use block layer bounce buffer
  ata: hpt37x: Convert to use match_string() helper

Pull libata fixes from Tejun Heo:
 "These two are fixes which missed v4.17.

  One is to remove an incorrect power management blacklist entry and the
  other to fix a cdb buffer overrun which has been there for a very long
  time"

* 'for-4.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  libata: Drop SanDisk SD7UB3Q*G1001 NOLPM quirk
  libata: zpodd: small read overflow in eject_tray()

Pull tty/serial updates from Greg KH:
 "Here is the big tty/serial driver update for 4.18-rc1.

  There's nothing major here, just lots of serial driver updates. Full
  details are in the shortlog, nothing anything specific to call out
  here.

  All have been in linux-next for a while with no reported issues"

* tag 'tty-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (55 commits)
  vt: Perform safe console erase only once
  serial: imx: disable UCR4_OREN on shutdown
  serial: imx: drop CTS/RTS handling from shutdown
  tty: fix typo in ASYNCB_FOURPORT comment
  serial: samsung: check DMA engine capabilities before using DMA mode
  tty: Fix data race in tty_insert_flip_string_fixed_flag
  tty: serial: msm_geni_serial: Fix TX infinite loop
  serial: 8250_dw: Fix runtime PM handling
  serial: 8250: omap: Fix idling of clocks for unused uarts
  tty: serial: drop ATH79 specific SoC symbols
  serial: 8250: Add missing rxtrig_bytes on Altera 16550 UART
  serial/aspeed-vuart: fix a couple mod_timer() calls
  serial: sh-sci: Use spin_{try}lock_irqsave instead of open coding version
  serial: 8250_of: Add IO space support
  tty/serial: atmel: use port->name as name in request_irq()
  serial: imx: dma_unmap_sg buffers on shutdown
  serial: imx: cleanup imx_uart_disable_dma()
  tty: serial: qcom_geni_serial: Add early console support
  tty: serial: qcom_geni_serial: Return IRQ_NONE for spurious interrupts
  tty: serial: qcom_geni_serial: Use iowrite32_rep to write to FIFO
  ...

Merge tag 'driver-core-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here is the driver core patchset for 4.18-rc1.

  The large chunk of these are firmware core documentation and api
  updates. Nothing major there, just better descriptions for others to
  be able to understand the firmware code better. There's also a user
  for a new firmware api call.

  Other than that, there are some minor updates for debugfs, kernfs, and
  the driver core itself.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'driver-core-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (23 commits)
  driver core: hold dev's parent lock when needed
  driver-core: return EINVAL error instead of BUG_ON()
  driver core: add __printf verification to device_create_groups_vargs
  mm: memory_hotplug: use put_device() if device_register fail
  base: core: fix typo 'can by' to 'can be'
  debugfs: inode: debugfs_create_dir uses mode permission from parent
  debugfs: Re-use kstrtobool_from_user()
  Documentation: clarify firmware_class provenance and why we can't rename the module
  Documentation: remove stale firmware API reference
  Documentation: fix few typos and clarifications for the firmware loader
  ath10k: re-enable the firmware fallback mechanism for testmode
  ath10k: use firmware_request_nowarn() to load firmware
  firmware: add firmware_request_nowarn() - load firmware without warnings
  firmware_loader: make firmware_fallback_sysfs() print more useful
  firmware_loader: move kconfig FW_LOADER entries to its own file
  firmware_loader: replace ---help--- with help
  firmware_loader: enhance Kconfig documentation over FW_LOADER
  firmware_loader: document firmware_sysfs_fallback()
  firmware: rename fw_sysfs_fallback to firmware_fallback_sysfs()
  firmware: use () to terminate kernel-doc function names
  ...

Pull char/misc driver updates from Greg KH:
 "Here is the "big" char and misc driver patches for 4.18-rc1.

  It's not a lot of stuff here, but there are some highlights:

   - coreboot driver updates

   - soundwire driver updates

   - android binder updates

   - fpga big sync, mostly documentation

   - lots of minor driver updates

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (81 commits)
  vmw_balloon: fixing double free when batching mode is off
  MAINTAINERS: Add driver-api/fpga path
  fpga: clarify that unregister functions also free
  documentation: fpga: move fpga-region.txt to driver-api
  documentation: fpga: add bridge document to driver-api
  documentation: fpga: move fpga-mgr.txt to driver-api
  Documentation: fpga: move fpga overview to driver-api
  fpga: region: kernel-doc fixes
  fpga: bridge: kernel-doc fixes
  fpga: mgr: kernel-doc fixes
  fpga: use SPDX
  fpga: region: change api, add fpga_region_create/free
  fpga: bridge: change api, don't use drvdata
  fpga: manager: change api, don't use drvdata
  fpga: region: don't use drvdata in common fpga code
  Drivers: hv: vmbus: Removed an unnecessary cast from void *
  ver_linux: Drop redundant calls to system() to test if file is readable
  ver_linux: Move stderr redirection from function parameter to function body
  misc: IBM Virtual Management Channel Driver (VMC)
  rpmsg: Correct support for MODULE_DEVICE_TABLE()
  ...

Pull USB and PHY updates from Greg KH:
 "Here is the big USB pull request for 4.18-rc1.

  Lots of stuff here, the highlights are:

   - phy driver updates and new additions

   - usual set of xhci driver updates

   - normal set of musb updates

   - gadget driver updates and new controllers

   - typec work, it's getting closer to getting fully out of the staging
     portion of the tree.

   - lots of minor cleanups and bugfixes.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (263 commits)
  Revert "xhci: Reset Renesas uPD72020x USB controller for 32-bit DMA issue"
  xhci: Add quirk to zero 64bit registers on Renesas PCIe controllers
  xhci: Allow more than 32 quirks
  usb: xhci: force all memory allocations to node
  selftests: add test for USB over IP driver
  USB: typec: fsusb302: no need to check return value of debugfs_create_dir()
  USB: gadget: udc: s3c2410_udc: no need to check return value of debugfs_create functions
  USB: gadget: udc: renesas_usb3: no need to check return value of debugfs_create functions
  USB: gadget: udc: pxa27x_udc: no need to check return value of debugfs_create functions
  USB: gadget: udc: gr_udc: no need to check return value of debugfs_create functions
  USB: gadget: udc: bcm63xx_udc: no need to check return value of debugfs_create functions
  USB: udc: atmel_usba_udc: no need to check return value of debugfs_create functions
  USB: dwc3: no need to check return value of debugfs_create functions
  USB: dwc2: no need to check return value of debugfs_create functions
  USB: core: no need to check return value of debugfs_create functions
  USB: chipidea: no need to check return value of debugfs_create functions
  USB: ehci-hcd: no need to check return value of debugfs_create functions
  USB: fhci-hcd: no need to check return value of debugfs_create functions
  USB: fotg210-hcd: no need to check return value of debugfs_create functions
  USB: imx21-hcd: no need to check return value of debugfs_create functions
  ...

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Decrease polling rate for erase/trim/discard
   - Allow non-sleeping GPIOs for card detect
   - Improve mmc block removal path
   - Enable support for mmc_sw_reset() for SDIO cards
   - Add mmc_sw_reset() to allow users to do a soft reset of the card
   - Allow power delay to be tunable via DT
   - Allow card detect debounce delay to be tunable via DT
   - Enable new quirk to limit clock rate for Marvell 8887 chip
   - Don't show eMMC RPMB and BOOT areas in /proc/partitions
   - Add capability to avoid 3.3V signaling for fragile HWs

  MMC host:
   - Improve/fixup support for handle highmem pages
   - Remove depends on HAS_DMA in case of platform dependency
   - mvsdio: Enable support for erase/trim/discard
   - rtsx_usb: Enable support for erase/trim/discard
   - renesas_sdhi: Fix WP logic regressions
   - renesas_sdhi: Add r8a77965 support
   - renesas_sdhi: Add R8A77980 to whitelist
   - meson: Add optional support for device reset
   - meson: Add support for the Meson-AXG platform
   - dw_mmc: Add new driver for BlueField DW variant
   - mediatek: Add support for 64G DRAM DMA
   - sunxi: Deploy runtime PM support
   - jz4740: Add support for JZ4780
   - jz4740: Enable support for DT based platforms
   - sdhci: Various improvement to timeout handling
   - sdhci: Disable support for HS200/HS400/UHS when no 1.8V support
   - sdhci-omap: Add support for controller in k2g SoC
   - sdhci-omap: Add workarounds for a couple of Erratas
   - sdhci-omap: Enable support for generic sdhci DT properties
   - sdhci-cadence: Re-send tune request to deal with errata
   - sdhci-pci: Fix 3.3V voltage switch for some BYT-based Intel controllers
   - sdhci-pci: Avoid 3.3V signaling on some NI 904x
   - sdhci-esdhc-imx: Use watermark levels for PIO access
   - sdhci-msm: Improve card detection handling
   - sdhci-msm: Add support voltage pad switching"

* tag 'mmc-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (104 commits)
  mmc: renesas_sdhi: really fix WP logic regressions
  mmc: mvsdio: Enable MMC_CAP_ERASE
  mmc: mvsdio: Respect card busy time out from mmc core
  mmc: sdhci-msm: Remove NO_CARD_NO_RESET quirk
  mmc: sunxi: Use ifdef rather than __maybe_unused
  mmc: mxmmc: Use ifdef rather than __maybe_unused
  mmc: mxmmc: include linux/highmem.h
  mmc: sunxi: mark PM functions as __maybe_unused
  mmc: Throttle calls to MMC_SEND_STATUS during mmc_do_erase()
  mmc: au1xmmc: handle highmem pages
  mmc: Allow non-sleeping GPIO cd
  mmc: sdhci-*: Don't emit error msg if sdhci_add_host() fails
  mmc: sd: Define name for default speed dtr
  mmc: core: Move calls to ->prepare_hs400_tuning() closer to mmc code
  mmc: sdhci-xenon: use match_string() helper
  mmc: wbsd: handle highmem pages
  mmc: ushc: handle highmem pages
  mmc: mxcmmc: handle highmem pages
  mmc: atmel-mci: use sg_copy_{from,to}_buffer
  mmc: android-goldfish: use sg_copy_{from,to}_buffer
  ...

Merge tag 'leds_for_4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds

Pull LED updates from Jacek Anaszewski:
 "This was quite a fruitful cycle, taking into account usual traffic on
  linux-leds list, as we managed to merge three new LED class drivers.

  New LED class drivers with related DT bindings:
   - add LED driver for CR0014114 board
   - add Spreadtrum SC27xx breathing light controller driver
   - introduce the lm3601x LED driver

  LED class fix:
   - ensure workqueue is initialized before setting brightness

  Improvements and fixes to existing LED class drivers:
   - fix return value check in sc27xx_led_probe()
   - use sysfs_match_string() helper in wm831x_status_src_store()"

* tag 'leds_for_4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
  leds: class: ensure workqueue is initialized before setting brightness
  leds: lm3601x: Introduce the lm3601x LED driver
  dt: bindings: lm3601x: Introduce the lm3601x driver
  leds: sc27xx: Fix return value check in sc27xx_led_probe()
  leds: Add Spreadtrum SC27xx breathing light controller driver
  dt-bindings: leds: Add SC27xx breathing light controller documentation
  leds: wm831x-status: Use sysfs_match_string() helper
  leds: add LED driver for CR0014114 board
  dt-bindings: Add vendor prefix and docs for CR0014114

Pull input updates from Dmitry Torokhov:

 - a new driver to ChipOne icn8505 based touchscreens

 - on certain systems with Elan touch controllers they will be switched
   away form PS/2 emulation and over to native SMbus mode

 - assorted driver fixups and improvements

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (24 commits)
  Input: elan_i2c - add ELAN0612 (Lenovo v330 14IKB) ACPI ID
  Input: goodix - add new ACPI id for GPD Win 2 touch screen
  Input: xpad - add GPD Win 2 Controller USB IDs
  Input: ti_am335x_tsc - prevent system suspend when TSC is in use
  Input: ti_am335x_tsc - ack pending IRQs at probe and before suspend
  Input: cros_ec_keyb - mark cros_ec_keyb driver as wake enabled device.
  Input: mk712 - update documentation web link
  Input: atmel_mxt_ts - fix reset-gpio for level based irqs
  Input: atmel_mxt_ts - require device properties present when probing
  Input: psmouse-smbus - allow to control psmouse_deactivate
  Input: elantech - detect new ICs and setup Host Notify for them
  Input: elantech - add support for SMBus devices
  Input: elantech - query the resolution in query_info
  Input: elantech - split device info into a separate structure
  Input: elan_i2c - add trackstick report
  Input: usbtouchscreen - add sysfs attribute for 3M MTouch firmware rev
  Input: ati_remote2 - fix typo 'can by' to 'can be'
  Input: replace hard coded string with __func__ in pr_err()
  Input: add support for ChipOne icn8505 based touchscreens
  Input: gamecon - avoid using __set_bit() for capabilities
  ...

Pull crypto updates from Herbert Xu:
 "API:

   - Decryption test vectors are now automatically generated from
     encryption test vectors.

  Algorithms:

   - Fix unaligned access issues in crc32/crc32c.

   - Add zstd compression algorithm.

   - Add AEGIS.

   - Add MORUS.

  Drivers:

   - Add accelerated AEGIS/MORUS on x86.

   - Add accelerated SM4 on arm64.

   - Removed x86 assembly salsa implementation as it is slower than C.

   - Add authenc(hmac(sha*), cbc(aes)) support in inside-secure.

   - Add ctr(aes) support in crypto4xx.

   - Add hardware key support in ccree.

   - Add support for new Centaur CPU in via-rng"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (112 commits)
  crypto: chtls - free beyond end rspq_skb_cache
  crypto: chtls - kbuild warnings
  crypto: chtls - dereference null variable
  crypto: chtls - wait for memory sendmsg, sendpage
  crypto: chtls - key len correction
  crypto: salsa20 - Revert "crypto: salsa20 - export generic helpers"
  crypto: x86/salsa20 - remove x86 salsa20 implementations
  crypto: ccp - Add GET_ID SEV command
  crypto: ccp - Add DOWNLOAD_FIRMWARE SEV command
  crypto: qat - Add MODULE_FIRMWARE for all qat drivers
  crypto: ccree - silence debug prints
  crypto: ccree - better clock handling
  crypto: ccree - correct host regs offset
  crypto: chelsio - Remove separate buffer used for DMA map B0 block in CCM
  crypt: chelsio - Send IV as Immediate for cipher algo
  crypto: chelsio - Return -ENOSPC for transient busy indication.
  crypto: caam/qi - fix warning in init_cgr()
  crypto: caam - fix rfc4543 descriptors
  crypto: caam - fix MC firmware detection
  crypto: clarify licensing of OpenSSL asm code
  ...

Pull fscrypt updates from Ted Ts'o:
 "Add bunch of cleanups, and add support for the Speck128/256
  algorithms.

  Yes, Speck is contrversial, but the intention is to use them only for
  the lowest end Android devices, where the alternative *really* is no
  encryption at all for data stored at rest"

* tag 'fscrypt_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt:
  fscrypt: log the crypto algorithm implementations
  fscrypt: add Speck128/256 support
  fscrypt: only derive the needed portion of the key
  fscrypt: separate key lookup from key derivation
  fscrypt: use a common logging function
  fscrypt: remove internal key size constants
  fscrypt: remove unnecessary check for non-logon key type
  fscrypt: make fscrypt_operations.max_namelen an integer
  fscrypt: drop empty name check from fname_decrypt()
  fscrypt: drop max_namelen check from fname_decrypt()
  fscrypt: don't special-case EOPNOTSUPP from fscrypt_get_encryption_info()
  fscrypt: don't clear flags on crypto transform
  fscrypt: remove stale comment from fscrypt_d_revalidate()
  fscrypt: remove error messages for skcipher_request_alloc() failure
  fscrypt: remove unnecessary NULL check when allocating skcipher
  fscrypt: clean up after fscrypt_prepare_lookup() conversions
  fs, fscrypt: only define ->s_cop when FS_ENCRYPTION is enabled
  fscrypt: use unbound workqueue for decryption

Pull xfs updates from Darrick Wong:
 "New features this cycle include the ability to relabel mounted
  filesystems, support for fallocated swapfiles, and using FUA for pure
  data O_DSYNC directio writes. With this cycle we begin to integrate
  online filesystem repair and refactor the growfs code in preparation
  for eventual subvolume support, though the road ahead for both
  features is quite long.

  There are also numerous refactorings of the iomap code to remove
  unnecessary log overhead, to disentangle some of the quota code, and
  to prepare for buffer head removal in a future upstream kernel.

  Metadata validation continues to improve, both in the hot path
  veifiers and the online filesystem check code. I anticipate sending a
  second pull request in a few days with more metadata validation
  improvements.

  This series has been run through a full xfstests run over the weekend
  and through a quick xfstests run against this morning's master, with
  no major failures reported.

  Summary:

   - Strengthen inode number and structure validation when allocating
     inodes.

   - Reduce pointless buffer allocations during cache miss

   - Use FUA for pure data O_DSYNC directio writes

   - Various iomap refactorings

   - Strengthen quota metadata verification to avoid unfixable broken
     quota

   - Make AGFL block freeing a deferred operation to avoid blowing out
     transaction reservations when running complex operations

   - Get rid of the log item descriptors to reduce log overhead

   - Fix various reflink bugs where inodes were double-joined to
     transactions

   - Don't issue discards when trimming unwritten extents

   - Refactor incore dquot initialization and retrieval interfaces

   - Fix some locking problmes in the quota scrub code

   - Strengthen btree structure checks in scrub code

   - Rewrite swapfile activation to use iomap and support unwritten
     extents

   - Make scrub exit to userspace sooner when corruptions or
     cross-referencing problems are found

   - Make scrub invoke the data fork scrubber directly on metadata
     inodes

   - Don't do background reclamation of post-eof and cow blocks when the
     fs is suspended

   - Fix secondary superblock buffer lifespan hinting

   - Refactor growfs to use table-dispatched functions instead of long
     stringy functions

   - Move growfs code to libxfs

   - Implement online fs label getting and setting

   - Introduce online filesystem repair (in a very limited capacity)

   - Fix unit conversion problems in the realtime freemap iteration
     functions

   - Various refactorings and cleanups in preparation to remove buffer
     heads in a future release

   - Reimplement the old bmap call with iomap

   - Remove direct buffer head accesses from seek hole/data

   - Various bug fixes"

* tag 'xfs-4.18-merge-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (121 commits)
  fs: use ->is_partially_uptodate in page_cache_seek_hole_data
  fs: remove the buffer_unwritten check in page_seek_hole_data
  fs: move page_cache_seek_hole_data to iomap.c
  xfs: use iomap_bmap
  iomap: add an iomap-based bmap implementation
  iomap: add a iomap_sector helper
  iomap: use __bio_add_page in iomap_dio_zero
  iomap: move IOMAP_F_BOUNDARY to gfs2
  iomap: fix the comment describing IOMAP_NOWAIT
  iomap: inline data should be an iomap type, not a flag
  mm: split ->readpages calls to avoid non-contiguous pages lists
  mm: return an unsigned int from __do_page_cache_readahead
  mm: give the 'ret' variable a better name __do_page_cache_readahead
  block: add a lower-level bio_add_page interface
  xfs: fix error handling in xfs_refcount_insert()
  xfs: fix xfs_rtalloc_rec units
  xfs: strengthen rtalloc query range checks
  xfs: xfs_rtbuf_get should check the bmapi_read results
  xfs: xfs_rtword_t should be unsigned, not signed
  dax: change bdev_dax_supported() to support boolean returns
  ...

Pull ext4 updates from Ted Ts'o:
 "A lot of cleanups and bug fixes, especially dealing with corrupted
  file systems"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (23 commits)
  ext4: fix fencepost error in check for inode count overflow during resize
  ext4: correctly handle a zero-length xattr with a non-zero e_value_offs
  ext4: bubble errors from ext4_find_inline_data_nolock() up to ext4_iget()
  ext4: do not allow external inodes for inline data
  ext4: report delalloc reserve as non-free in statfs for project quota
  ext4: remove NULL check before calling kmem_cache_destroy()
  jbd2: remove NULL check before calling kmem_cache_destroy()
  jbd2: remove bunch of empty lines with jbd2 debug
  ext4: handle errors on ext4_commit_super
  ext4: do not update s_last_mounted of a frozen fs
  ext4: factor out helper ext4_sample_last_mounted()
  vfs: add the sb_start_intwrite_trylock() helper
  ext4: update mtime in ext4_punch_hole even if no blocks are released
  ext4: add verifier check for symlink with append/immutable flags
  fs: ext4: add new return type vm_fault_t
  ext4: fix hole length detection in ext4_ind_map_blocks()
  ext4: mark block bitmap corrupted when found
  ext4: mark inode bitmap corrupted when found
  ext4: add new ext4_mark_group_bitmap_corrupted() helper
  ext4: fix wrong return value in ext4_read_inode_bitmap()
  ...

Pull s390 updates from Martin Schwidefsky:

 - A rework for the s390 arch random code, the TRNG instruction is
   rather slow and should not be used on the interrupt path

 - A fix for a memory leak in the zcrypt driver

 - Changes to the early boot code to add a compile time check for code
   that may not use the .bss section, with the goal to avoid initrd
   corruptions

 - Add an interface to get the physical network ID (pnetid), this is
   useful to group network devices that are attached to the same network

 - Some cleanup for the linker script

 - Some code improvement for the dasd driver

 - Two fixes for the perf sampling support

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/zcrypt: Fix CCA and EP11 CPRB processing failure memory leak.
  s390/archrandom: Rework arch random implementation.
  s390/net: add pnetid support
  s390/dasd: simplify locking in dasd_times_out
  s390/cio: add test for ccwgroup device
  s390/cio: add helper to query utility strings per given ccw device
  s390: remove no-op macro VMLINUX_SYMBOL()
  s390: remove closung punctuation from spectre messages
  s390: introduce compile time check for empty .bss section
  s390/early: move functions which may not access bss section to extra file
  s390/early: get rid of #ifdef CONFIG_BLK_DEV_INITRD
  s390/early: get rid of memmove_early
  s390/cpum_sf: Add data entry sizes to sampling trailer entry
  perf: fix invalid bit in diagnostic entry

Pull m68knommu updates from Greg Ungerer:
 "These changes all relate to converting the IO access functions for the
  ColdFire (and all other non-MMU m68k) platforms to use asm-generic IO
  instead.

  This makes the IO support the same on all ColdFire (regardless of MMU
  enabled or not) and means we can now support PCI in non-MMU mode.

  As a bonus these changes remove more code than they add"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k: fix ColdFire PCI config reads and writes
  m68k: introduce iomem() macro for __iomem conversions
  m68k: allow ColdFire PCI bus on MMU and non-MMU configuration
  m68k: fix ioremapping for internal ColdFire peripherals
  m68k: fix read/write multi-byte IO for PCI on ColdFire
  m68k: don't redefine access functions if we have PCI
  m68k: remove old ColdFire IO access support code
  m68k: use io_no.h for MMU and non-MMU enabled ColdFire
  m68k: setup PCI support code in io_no.h
  m68k: group io mapping definitions and functions
  m68k: rework raw access macros for the non-MMU case
  m68k: use asm-generic/io.h for non-MMU io access functions
  m68k: put definition guards around virt_to_phys and phys_to_virt
  m68k: move *_relaxed macros into io_no.h and io_mm.h

Pull reed-salomon library updates from Kees Cook:
 "Refactors rslib and callers to provide a per-instance allocation area
  instead of performing VLAs on the stack"

* tag 'rslib-v4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  rslib: Allocate decoder buffers to avoid VLAs
  mtd: rawnand: diskonchip: Allocate rs control per instance
  rslib: Split rs control struct
  rslib: Simplify error path
  rslib: Remove GPL boilerplate
  rslib: Add SPDX identifiers
  rslib: Cleanup top level comments
  rslib: Cleanup whitespace damage
  dm/verity_fec: Use GFP aware reed solomon init
  rslib: Add GFP aware init function

Pull device properties framework update from Rafael Wysocki:
 "Modify the device properties framework to remove union aliasing from
  it (Andy Shevchenko)"

* tag 'dp-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  device property: Get rid of union aliasing

Pull ACPI updates from Rafael Wysocki:
 "These update the ACPICA code in the kernel to the 20180508 upstream
  revision and make it support the RT patch, add CPPC v3 support to the
  ACPI CPPC library, add a WDAT-based watchdog quirk to prevent clashes
  with the RTC, add quirks to the ACPI AC and battery drivers, and
  update the ACPI SoC drivers.

  Specifics:

   - Update the ACPICA code in the kernel to the 20180508 upstream
     revision including:
       * iASL -tc option enhancement (Bob Moore).
       * Debugger improvements (Bob Moore).
       * Support for tables larger than 1 MB in acpidump/acpixtract (Bob
         Moore).
       * Minor fixes and cleanups (Colin Ian King, Toomas Soome).

   - Make the ACPICA code in the kernel support the RT patch (Sebastian
     Andrzej Siewior, Steven Rostedt).

   - Add a kmemleak annotation to the ACPICA code (Larry Finger).

   - Add CPPC v3 support to the ACPI CPPC library and fix two issues
     related to CPPC (Prashanth Prakash, Al Stone).

   - Add an ACPI WDAT-based watchdog quirk to prefer iTCO_wdt on systems
     where WDAT clashes with the RTC SRAM (Mika Westerberg).

   - Add some quirks to the ACPI AC and battery drivers (Carlo Caione,
     Hans de Goede).

   - Update the ACPI SoC drivers for Intel (LPSS) and AMD (APD)
     platforms (Akshu Agrawal, Hans de Goede).

   - Fix up some assorted minor issues (Al Stone, Laszlo Toth, Mathieu
     Malaterre)"

* tag 'acpi-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits)
  ACPICA: Mark acpi_ut_create_internal_object_dbg() memory allocations as non-leaks
  ACPI / watchdog: Prefer iTCO_wdt always when WDAT table uses RTC SRAM
  mailbox: PCC: erroneous error message when parsing ACPI PCCT
  ACPICA: Update version to 20180508
  ACPICA: acpidump/acpixtract: Support for tables larger than 1MB
  ACPI: APD: Add AMD misc clock handler support
  clk: x86: Add ST oscout platform clock
  ACPICA: Update version to 20180427
  ACPICA: Debugger: Removed direct support for EC address space in "Test Objects"
  ACPICA: Debugger: Add Package support for "test objects" command
  ACPICA: Improve error messages for the namespace root node
  ACPICA: Fix potential infinite loop in acpi_rs_dump_byte_list
  ACPICA: vsnprintf: this statement may fall through
  ACPICA: Tables: Fix spelling mistake in comment
  ACPICA: iASL: Enhance the -tc option (create AML hex file in C)
  ACPI: Add missing prototype_for arch_post_acpi_subsys_init()
  ACPI / tables: improve comments regarding acpi_parse_entries_array()
  ACPICA: Convert acpi_gbl_hardware lock back to an acpi_raw_spinlock
  ACPICA: provide abstraction for raw_spinlock_t
  ACPI / CPPC: Fix invalid PCC channel status errors
  ...

Pull power management updates from Rafael Wysocki:
 "These include a significant update of the generic power domains
  (genpd) and Operating Performance Points (OPP) frameworks, mostly
  related to the introduction of power domain performance levels,
  cpufreq updates (new driver for Qualcomm Kryo processors, updates of
  the existing drivers, some core fixes, schedutil governor
  improvements), PCI power management fixes, ACPI workaround for
  EC-based wakeup events handling on resume from suspend-to-idle, and
  major updates of the turbostat and pm-graph utilities.

  Specifics:

   - Introduce power domain performance levels into the the generic
     power domains (genpd) and Operating Performance Points (OPP)
     frameworks (Viresh Kumar, Rajendra Nayak, Dan Carpenter).

   - Fix two issues in the runtime PM framework related to the
     initialization and removal of devices using device links (Ulf
     Hansson).

   - Clean up the initialization of drivers for devices in PM domains
     (Ulf Hansson, Geert Uytterhoeven).

   - Fix a cpufreq core issue related to the policy sysfs interface
     causing CPU online to fail for CPUs sharing one cpufreq policy in
     some situations (Tao Wang).

   - Make it possible to use platform-specific suspend/resume hooks in
     the cpufreq-dt driver and make the Armada 37xx DVFS use that
     feature (Viresh Kumar, Miquel Raynal).

   - Optimize policy transition notifications in cpufreq (Viresh Kumar).

   - Improve the iowait boost mechanism in the schedutil cpufreq
     governor (Patrick Bellasi).

   - Improve the handling of deferred frequency updates in the schedutil
     cpufreq governor (Joel Fernandes, Dietmar Eggemann, Rafael Wysocki,
     Viresh Kumar).

   - Add a new cpufreq driver for Qualcomm Kryo (Ilia Lin).

   - Fix and clean up some cpufreq drivers (Colin Ian King, Dmitry
     Osipenko, Doug Smythies, Luc Van Oostenryck, Simon Horman, Viresh
     Kumar).

   - Fix the handling of PCI devices with the DPM_SMART_SUSPEND flag set
     and update stale comments in the PCI core PM code (Rafael Wysocki).

   - Work around an issue related to the handling of EC-based wakeup
     events in the ACPI PM core during resume from suspend-to-idle if
     the EC has been put into the low-power mode (Rafael Wysocki).

   - Improve the handling of wakeup source objects in the PM core (Doug
     Berger, Mahendran Ganesh, Rafael Wysocki).

   - Update the driver core to prevent deferred probe from breaking
     suspend/resume ordering (Feng Kan).

   - Clean up the PM core somewhat (Bjorn Helgaas, Ulf Hansson, Rafael
     Wysocki).

   - Make the core suspend/resume code and cpufreq support the RT patch
     (Sebastian Andrzej Siewior, Thomas Gleixner).

   - Consolidate the PM QoS handling in cpuidle governors (Rafael
     Wysocki).

   - Fix a possible crash in the hibernation core (Tetsuo Handa).

   - Update the rockchip-io Adaptive Voltage Scaling (AVS) driver (David
     Wu).

   - Update the turbostat utility (fixes, cleanups, new CPU IDs, new
     command line options, built-in "Low Power Idle" counters support,
     new POLL and POLL% columns) and add an entry for it to MAINTAINERS
     (Len Brown, Artem Bityutskiy, Chen Yu, Laura Abbott, Matt Turner,
     Prarit Bhargava, Srinivas Pandruvada).

   - Update the pm-graph to version 5.1 (Todd Brandt).

   - Update the intel_pstate_tracer utility (Doug Smythies)"

* tag 'pm-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (128 commits)
  tools/power turbostat: update version number
  tools/power turbostat: Add Node in output
  tools/power turbostat: add node information into turbostat calculations
  tools/power turbostat: remove num_ from cpu_topology struct
  tools/power turbostat: rename num_cores_per_pkg to num_cores_per_node
  tools/power turbostat: track thread ID in cpu_topology
  tools/power turbostat: Calculate additional node information for a package
  tools/power turbostat: Fix node and siblings lookup data
  tools/power turbostat: set max_num_cpus equal to the cpumask length
  tools/power turbostat: if --num_iterations, print for specific number of iterations
  tools/power turbostat: Add Cannon Lake support
  tools/power turbostat: delete duplicate #defines
  x86: msr-index.h: Correct SNB_C1/C3_AUTO_UNDEMOTE defines
  tools/power turbostat: Correct SNB_C1/C3_AUTO_UNDEMOTE defines
  tools/power turbostat: add POLL and POLL% column
  tools/power turbostat: Fix --hide Pk%pc10
  tools/power turbostat: Build-in "Low Power Idle" counters support
  tools/power turbostat: Don't make man pages executable
  tools/power turbostat: remove blank lines
  tools/power turbostat: a small C-states dump readability immprovement
  ...

Pull block fixes from Jens Axboe:
 "This just contains the dm kzalloc fix that was discussed, and a fix
  that I queued up yesterday for a case where blk-mq doesn't honor the
  stop bit appropriately"

* tag 'for-linus-20180605' of git://git.kernel.dk/linux-block:
  dm: Use kzalloc for all structs with embedded biosets/mempools
  blk-mq: return when hctx is stopped in blk_mq_run_work_fn

Merge faddr2line updates from Josh Poimboeuf:

 - revert faddr2line's default output to its original non-code-listing
   output, and make the code listing an optional feature

 - give faddr2line a real maintainer, so get_maintainer.pl will actually
   CC me on future patches

* emailed patches from Josh Poimboeuf <jpoimboe@redhat.com>:
  MAINTAINERS: add Josh Poimboeuf as faddr2line maintainer
  scripts/faddr2line: make the new code listing format optional

... so I finally get credit for my greatest accomplishment.

And, less importantly, so get_maintainer.pl will actually CC me on
future patches.
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 6870c016 ("scripts/faddr2line: show the code context")
radically altered the output format of the faddr2line tool.  And while
the new list output format might have merit it broke my vim usage and
was hard to read.

Make the new format optional; using a '--list' argument and attempt to
make the output slightly easier to read by adding a little whitespace to
separate the different files and explicitly mark the line in question.

Cc: Changbin Du <changbin.du@intel.com>
Fixes: 6870c016 ("scripts/faddr2line: show the code context")
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Merge tag 'asoc-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v4.18

This is a very big update, mainly due to a huge set of new drivers some
of which are individually very large.  We also have a lot of fixes for
the topology stuff, several of the users have stepped up and fixed some
the serious issues there, and continued progress on the transition away
from CODEC specific drivers to generic component drivers.

 - Many fixes for the topology code, including fixes for the half done
   v4 ABI compatibility from Guenter Roeck and other ABI fixes from
   Kirill Marinushkin.
 - Lots of cleanup for Intel platforms based on Realtek CODECs from Hans
   de Goode.
 - More followups on removing legacy CODEC things and transitioning to
   components from Morimoto-san.
 - Conversion of OMAP DMA to the new, more standard SDMA-PCM driver.
 - A series of fixes and updates to the rather elderly Cirrus Logic SoC
   drivers from Alexander Sverdlin.
 - Qualcomm DSP support from Srinivas Kandagatla.
 - New drivers for Analog SSM2305, Atmel I2S controllers, Mediatek
   MT6351, MT6797 and MT7622, Qualcomm DSPs, Realtek RT1305, RT1306 and
   RT5668 and TI TSCS454

mempool_init()/bioset_init() require that the mempools/biosets be zeroed
first; they probably should not _require_ this, but not allocating those
structs with kzalloc is a fairly nonsensical thing to do (calling
mempool_exit()/bioset_exit() on an uninitialized mempool/bioset is legal
and safe, but only works if said memory was zeroed.)
Acked-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NKent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

In file included from scripts/kconfig/zconf.tab.c:2485:
scripts/kconfig/confdata.c: In function ‘conf_write’:
scripts/kconfig/confdata.c:773:22: warning: ‘%s’ directive writing likely 7 or more bytes into a region of size between 1 and 4097 [-Wformat-overflow=]
  sprintf(newname, "%s%s", dirname, basename);
                      ^~
scripts/kconfig/confdata.c:773:19: note: assuming directive output of 7 bytes
  sprintf(newname, "%s%s", dirname, basename);
                   ^~~~~~
scripts/kconfig/confdata.c:773:2: note: ‘sprintf’ output 1 or more bytes (assuming 4104) into a destination of size 4097
  sprintf(newname, "%s%s", dirname, basename);
  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
scripts/kconfig/confdata.c:776:23: warning: ‘.tmpconfig.’ directive writing 11 bytes into a region of size between 1 and 4097 [-Wformat-overflow=]
   sprintf(tmpname, "%s.tmpconfig.%d", dirname, (int)getpid());
                       ^~~~~~~~~~~
scripts/kconfig/confdata.c:776:3: note: ‘sprintf’ output between 13 and 4119 bytes into a destination of size 4097
   sprintf(tmpname, "%s.tmpconfig.%d", dirname, (int)getpid());
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Increase the size of tmpname and newname to make GCC happy.

Cc: stable@vger.kernel.org
Signed-off-by: NNathan Chancellor <natechancellor@gmail.com>
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>