They were globals, and since we support multiple hists and sessions
at the same time, it doesn't make sense to calculate those values
considereing all symbols in all sessions.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

And don't consider them in hists__inc_nr_entries.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

and fix the broken case if a core's frequency depends on others.

trace_power_frequency was only implemented in a rather ungeneric
way in acpi-cpufreq driver's target() function only.

-> Move the call to trace_power_frequency to
   cpufreq.c:cpufreq_notify_transition() where CPUFREQ_POSTCHANGE
   notifier is triggered.
   This will support power frequency tracing by all cpufreq
   drivers.

trace_power_frequency did not trace frequency changes correctly
when the userspace governor was used or when CPU cores'
frequency depend on each other.

-> Moving this into the CPUFREQ_POSTCHANGE notifier and pass the cpu
   which gets switched automatically fixes this.

Robert Schoene provided some important fixes on top of my
initial quick shot version which are integrated in this patch:
- Forgot some changes in power_end trace (TP_printk/variable names)
- Variable dummy in power_end must now be cpu_id
- Use static 64 bit variable instead of unsigned int for cpu_id

[akpm@linux-foundation.org: build fix]
Signed-off-by: NThomas Renninger <trenn@suse.de>
Cc: davej@codemonkey.org.uk
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Cc: Dave Jones <davej@codemonkey.org.uk>
Acked-by: NArjan van de Ven <arjan@infradead.org>
Cc: Robert Schoene <robert.schoene@tu-dresden.de>
Tested-by: NRobert Schoene <robert.schoene@tu-dresden.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>

Introducing hists__remove_entry_filter.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Right now ENTER doesn't always exits the newt tree widget, as it is used
for expanding/collapsing branches, but with the new tree widget being
developed we need to regain control to handle it, expanding/collapsing
branches.

In fact its really up to the ui_browser user to state what extra keys
should stop ui_browser__run, and it should handle just the ones needed
for basic browsing.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Invert the return value of die_compare_name(), because it returns a 'bool'
result which should be expeced true if the die's name is same as compared
string.

LKML-Reference: <4C36EBED.1000006@hitachi.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Gcc generates DW_AT_comp_dir and stores relative source path if building kernel
without O= option. In that case, perf probe --line sometimes doesn't work
without --source option, because it tries to access relative source path.

This adds DW_AT_comp_dir support to perf probe for finding an absolute source
path when no --source option.

LKML-Reference: <4C36EBE7.3060802@hitachi.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Perf probe -L shows incorrect error message (Dwarf error) if it fails to find
source file. This can confuse users.

# ./perf probe -s /nowhere -L vfs_read
Debuginfo analysis failed. (-2)
  Error: Failed to show lines. (-2)

With this patch, it shows correct message.

# ./perf probe -s /nowhere -L vfs_read
Failed to find source file. (-2)
  Error: Failed to show lines. (-2)

LKML-Reference: <4C36EBDB.4020308@hitachi.com>
Cc: Chase Douglas <chase.douglas@canonical.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: NChase Douglas <chase.douglas@canonical.com>
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Implement get_arch_regstr() for SH so that, given a DWARF register number, the
corresponding symbolic name of that register can be looked up.
Acked-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Ian Munsie <imunsie@au.ibm.com>
LKML-Reference: <e55812819ad18c2ceca5651ac7698a2af46180d7.1278774279.git.matt@console-pimps.org>
Signed-off-by: NMatt Fleming <matt@console-pimps.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Hists have their hits increased by the event period. And this
period based counting is the foundation of all the stats in
perf report.

But callchains still use the raw number of hits, without taking
the period into account. So when we compute the percentage,
absolute based percentages are totally broken, and relative ones
too in the first parent level. Because we pass the number of events
muliplied by their period as the total number of hits to the
callchain filtering, while callchains expect this number to be
the number of raw hits.

perf report -g graph was simply not working, showing no graph unless
the min percent was zero. And even there the percentage of the
branches was always 0. And may be fractal filtering was broken on
the first branch level too.

flat also was broken, but it was hidden because of other breakages.

Anyway fix this by counting using periods on callchains.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>

Initialize the callchain radix tree root correctly.

When we walk through the parents, we must stop after the root, but
since it wasn't well initialized, its parent pointer was random.

Also the number of hits was random because uninitialized, hence it
was part of the callchain while the root doesn't contain anything.

This fixes segfaults and percentages followed by empty callchains
while running:

	perf report -g flat
Reported-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: 2.6.31.x-2.6.34.x <stable@kernel.org>

Add static and global variables support to perf probe.
This allows user to trace non-local variables (and
structure members) at probe points.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20100519195749.2885.17451.stgit@localhost6.localdomain6>
Signed-off-by: NMasami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add array-entry tracing support to perf probe. This enables to trace an entry
of array which is indexed by constant value, e.g. array[0].

For example:

  $ perf probe -a 'bio_split bi->bi_io_vec[0]'

Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20100519195742.2885.5344.stgit@localhost6.localdomain6>
Signed-off-by: NMasami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Support string type casting to event argument. If perf-probe finds an argument
casted as string, it ensures the target variable is "(unsigned/signed) char
*(or []). perf-probe also adds dereference if the target is a pointer.

So, both of 'char buf[10];' and 'char *buf;' can be accessed by 'buf:string'

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20100519195734.2885.1666.stgit@localhost6.localdomain6>
Signed-off-by: NMasami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This gets rid of the default version fallback for Perf and
changes it so that it returns the version of the kernel from
it's Makefile (if sources were not from git, ie. if it was
downloaded from a tarball)
Signed-off-by: NThavidu Ranatunga <tharan@au1.ibm.com>
Acked-by: NIan Munsie <imunsie@au1.ibm.com>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1278316815-6099-2-git-send-email-tharan@au1.ibm.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Changes the Perf --version string such that it shows the kernel
version as suggested by Ingo as follows:

That way the perf that comes with v2.6.34 will be:

  perf version v2.6.34

while interim versions will have the version of the interim
kernel - for example:

 perf version v2.6.35-rc4-70-g39ef13a4

This functionality was already in the perf version generator
file except that it was looking for a .git in the perf directory
instead of the kernel directory.
Signed-off-by: NThavidu Ranatunga <tharan@au1.ibm.com>
Acked-by: NIan Munsie <imunsie@au1.ibm.com>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1278316815-6099-1-git-send-email-tharan@au1.ibm.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

make version 3.80 doesn't support "else ifdef" on the same line, also it
doesn't support unindented nested constructs.

Build fails with:
Makefile:608: Extraneous text after `else' directive
Makefile:611: *** only one `else' per conditional.  Stop.

This patch fixes the build for make 3.80.

Cc: Borislav Petkov <borislav.petkov@amd.com>
LKML-Reference: <1277990366-1462-1-git-send-email-conny.seidel@amd.com>
Signed-off-by: NConny Seidel <conny.seidel@.amd.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Introduce a filter function to skip "." and ".." directories when calculating
tid number, otherwise tid 0 will be included in the all_tid result array.

Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <4C185F68.1020505@cn.fujitsu.com>
Signed-off-by: NGui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When compiling perf on latest tip/master I see the following
error:

  cc1: warnings being treated as errors
  util/newt.c: In function 'hist_entry__tui_annotate':
  util/newt.c:764: warning: 'ret' is used uninitialized in
  this function make: *** [util/newt.o] Error 1

I think the problem was introduced by commit
13f499f0

Below is a patch that fixes the problem.
Signed-off-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20100629173226.GC23231@linux.vnet.ibm.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

guest_kallsyms is redundant here, remove it.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Yanmin Zhang <yanmin_zhang@linux.intel.com>
LKML-Reference: <4C241140.9090008@cn.fujitsu.com>
Signed-off-by: NGui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Account and report lost events in perf trace debugging mode,
useful to check the reliability of the traces.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Tom Zanussi <tzanussi@gmail.com>

Errors due to ordering bugs are easily lost in the middle
of traces.

When we are in this mode, don't print the traces so that
we don't miss the debugging messages.
But display a comforting message if we didn't encounter any
ordering problem.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>

4 bytes is fine as a default access for data breakpoints. But
instruction breakpoints should take the native pointer length,
otherwise we get a -EINVAL in x86-64.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Cc: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Jason Wessel <jason.wessel@windriver.com>

By adding a ui_browser->refresh_entries() pure virtual member.

Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Another patch eroding the changes I had to move to a tree widget that
doesn't requires adding all entries in an existing list/tree structure
to a generic tree widget, but instead allows traversing just the entries
that should appear on the screen on a given moment.

Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

So that we can use the ui_browser on things like an rb_tree, etc.

Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Will be used in more places in the new tree widget.

Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Fix a typo introduced by recent Makefile changes, in f9af3a4c.  Without it, Perl
scripting support won't get compiled in.

Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <1276836006.7762.15.camel@tropicana>
Signed-off-by: NTom Zanussi <tzanussi@gmail.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

At exit, perf record will kill the process it was profiling by sending a
SIGTERM to child_pid (if it had been initialised), but in certain situations
child_pid may be 0 and perf would mistakenly kill more processes than intended.

child_pid is set to the return of fork() to either 0 or the pid of the child.
Ordinarily this would not present an issue as the child calls execvp to spawn
the process to be profiled and would therefore never run it's sig_atexit and
never attempt to kill pid 0.

However, if a nonexistant binary had been passed in to perf record the call to
execvp would fail and child_pid would be left set to 0. The child would then
exit and it's atexit handler, finding that child_pid was initialised to 0,
would call kill(0, SIGTERM), resulting in every process within it's process
group being killed.

In the case that perf was being run directly from the shell this typically
would not be an issue as the shell isolates the process.  However, if perf was
being called from another program it could kill unexpected processes, which may
even include X.

This patch changes the logic of the test for whether child_pid was initialised
to only consider positive pids as valid, thereby never attempting to kill pid
0.

Cc: David S. Miller <davem@davemloft.net>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <1276072680-17378-1-git-send-email-imunsie@au1.ibm.com>
Signed-off-by: NIan Munsie <imunsie@au1.ibm.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

If we cannot open our data file, print strerror(errno) for a more
comprehensible error message; and only suggest 'perf record' on ENOENT.

In particular, this fixes the nonsensical advice when:

    % sudo perf record sleep 1
    [ perf record: Woken up 1 times to write data ]
    [ perf record: Captured and wrote 0.009 MB perf.data (~381 samples) ]
    % perf trace
    failed to open file: perf.data  (try 'perf record' first)
    %

Cc: Ingo Molnar <mingo@elte.hu>
LPU-Reference: <20100612033615.GA24731@hexapodia.org>
Signed-off-by: NAndy Isaacson <adi@hexapodia.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The loop counter math in trace_event was much more complicated than
necessary, resulting in incorrectly decoding the human-readable
portion of the partial last line of hexdump in "perf trace -D" output:

.  0020:  00 00 00 00 00 00 00 00 2f 73 62 69 6e 2f 69 6e  ......../sbin/i
.  0030:  69 74 00 00 00 00 00 00                          /sbin/i

With this fixed (and simpler!) code, we get the correct output:

.  0020:  00 00 00 00 00 00 00 00 2f 73 62 69 6e 2f 69 6e  ......../sbin/in
.  0030:  69 74 00 00 00 00 00 00                          it......

Cc: Ingo Molnar <mingo@elte.hu>
LPU-Reference: <20100612024404.GA24469@hexapodia.org>
Signed-off-by: NAndy Isaacson <adi@hexapodia.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The probe plugin requires access to the source code for some operations.  The
source code must be in the exact same location as specified by the DWARF tags,
but sometimes the location is an absolute path that cannot be replicated by a
normal user. This change adds the -s|--source option to allow the user to
specify the root of the kernel source tree.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
LKML-Reference: <1276543590-10486-1-git-send-email-chase.douglas@canonical.com>
Signed-off-by: NChase Douglas <chase.douglas@canonical.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

These are local-configuration files and should be ignored.

LKML-Reference: <1276516847-25817-1-git-send-email-kirr@landau.phys.spbu.ru>
Signed-off-by: NKirill Smelkov <kirr@landau.phys.spbu.ru>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

There are situations where there is enough information in the perf.data
to process the samples. Updating the buildid cache may add unecessary
overhead in terms of disk space and time (copying large elf images).

A persistent option to do this already exists via the perfconfig file,
simply do:

[buildid]
dir = /dev/null

This patch provides a way to suppress builid cache updates on a per-run
basis.  It addds a new option, -N, to perf record. Buildids are still
generated in the perf.data file.

Cc: David S. Miller <davem@davemloft.net>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <4c19ef89.93ecd80a.40dc.fffff8e9@mx.google.com>
Signed-off-by: NStephane Eranian <eranian@google.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Currently symbol resolution does not work for 64-bit programs on architectures
that use function descriptors such as ppc64.

The problem is that a symbol doesn't point to a text address, it points to a
data area that contains (amongst other things) a pointer to the text address.

We look for a section called ".opd" which is the function descriptor area. To
create the full symbol table, when we see a symbol in the function descriptor
section we load the first pointer and use that as the text address.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1276523793-15422-1-git-send-email-ebmunson@us.ibm.com>
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NEric B Munson <ebmunson@us.ibm.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

A bug was introduced by commit c45c6ea2.

Perf record was scanning /proc/PID to create synthetic PERF_RECOR_MMAP
entries even though it was running in per-thread mode. There was a bogus
check to select what mmaps to synthesize. We only need all processes in
system-wide mode.

Cc: David S. Miller <davem@davemloft.net>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <4c192107.4f1ee30a.4316.fffff98e@mx.google.com>
Signed-off-by: NStephane Eranian <eranian@google.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Move them to a session->dead_threads list just like we do with maps that
are replaced, because we may have hist_entries pointing to them.

This fixes a bug when inserting maps for a new thread that reused the
TID, mixing maps for two different threads, causing an endless loop.

The code for insering maps should be made more robust but for .35 this
is the minimalistic patch.
Reported-by: NIngo Molnar <mingo@elte.hu>
Cc: David S. Miller <davem@davemloft.net>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When processing events we want to give visual feedback to the user when
using the newt browser, so there are ui_progress calls in
__perf_session__process_events, but those should check if newt is being
used.
Reported-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>
Tested-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>,
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <20100609123530.GB9471@ghostprotocols.net>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>