- 21 2月, 2010 8 次提交
-
-
由 Ben Dooks 提交于
Remove the Kconfig and PLAT_S3C64XX defines for the previous S3C64XX directory structure now that the code is moved into mach-s3c64xx. Note, we cannot currently remove plat-s3c64xx directory as we have a pair of include files used within plat-s3c and plat-samsung that need to find a new home. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
Turn the init sequence of s3c24xx_register_baseclocks(xtal); s3c64xx_register_clocks(); s3c6400_register_clocks(S3C6410_CLKDIV0_ARM_MASK); into a single call as this is now contained within one file. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
Merge plat-s3c64xx/s3c6400-clock.c mach-s3c64xx/clock.c placing all the clock code into one place. Note, no effort is made in this patch to squash the init functions together. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
Since this file is small, and is compiled for both systems in this architecture merge it into the cpu support file and remove the original instead of moving it. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
Move the core S3C64XX support to mach-s3c64xx as it is unlikely to be used outside of this directory. Also move the SoC header files in with it. This includes the clock, cpu, cpufreq, dma, gpiolib and pll support. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
Move the S3C64XX specific device and setup files into mach-s3c64xx as they are unlikely to be used outside of this code. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
Move IRQ support to mach-s3c64xx as it is unlikely to be re-used outside this machine. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
Move the register and GPIO definition files from plat-s3c64xx into the machine include direcotry as they are unlikely to be reused outside mach-s3c64xx. This move includes removing the empty <mach/regs-clock.h> and replacing it with the <plat/regs-clock.h> implementation. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
- 26 1月, 2010 6 次提交
-
-
由 Ben Dooks 提交于
Squash the SDHCI setup for both the S3C6400 and S3C6410 into one file and make the S3C6410 case use the S3C6400 code. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
The iotable in arch/arm/mach-s3c64xx/s3c6410.c is currently empty and therefore can be removed from the build. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
As per discussions with Russell King on linux-arm-kernel, it appears that both mach-s3c6400 and mach-s3c6410 are so close together that they should simply be merged into mach-s3c64xx. Note, this patch does not eliminate any of the bits that are still common, it is simply a move of the two directories together, any further common code will be eliminated or moved in further patches. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
Functions should be marked __init, not __initdata. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Maurus Cuelenaere 提交于
ARM: SAMSUNG: Fix null pointer dereference in ADC driver Use struct adc_device instead of relying on client (which could be NULL) when checking for SoC type. Signed-off-by: NMaurus Cuelenaere <mcuelenaere@gmail.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Thomas Abraham 提交于
This patch adds UART serial port support for S5PV210. Signed-off-by: NThomas Abraham <thomas.ab@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
- 21 1月, 2010 10 次提交
-
-
由 Ben Dooks 提交于
Add the HSOTG and HSMMC block addresses to the map.h file. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
The s3c64xx_spi_set_info() sets one of two platform data structures depending on which controller is being specified. Change to taking a pointer to the relevant platform data structure and then having one set of code to place the data into the area being pointed to. Cc: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Maurus Cuelenaere 提交于
ARM: S3C64XX: Fix typo in s3c-hsotg platform data Signed-off-by: NMaurus Cuelenaere <mcuelenaere@gmail.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Mark Brown 提交于
They are not exported, they are referenced via vtables. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Mark Brown 提交于
It's not exported. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Mark Brown 提交于
As reported when the patch was posted commit 71269364 ("ARM: S3C64XX: Add I2S resources in platform code") uses pin names for the IISv4 data output pins which are not present in mainline, causing dev-audio to fail to build. Fix this by using the defines which are actually present in the kernel source. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Mark Brown 提交于
The WM835x driver won't actually use this yet but it will in the future when the changes converting it to genirq are merged. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
Move the pm-check.c file to plat-samsung for all Samsung SoC users, and update Kconfig names to make them SAMSUNG_ instead of S3C2410_ Sed expresions used to make the change: s/S3C2410_PM_DEBUG/SAMSUNG_PM_DEBUG/g s/S3C2410_PM_CHECK/SAMSUNG_PM_CHECK/g Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
Move the PWM driver support to plat-samsung, as these PWM blocks are close enough across the current range to be supported by this driver. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
Move header files which are not likely to be touched in any further support addition out of plat-s3c's include directory into plat-samsung. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
- 19 1月, 2010 11 次提交
-
-
由 Kukjin Kim 提交于
This patch adds the IO descriptor for ChipID block in S5P6440. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
Rename mach-s3c2410/include/mach/gpio-core.h to mach/gpio-track.h so that it can be included by <plat/gpio-core.h> when needed. Eliminate all other empty gpio-core.h files and just include the <plat/gpio-core.h> as necessary. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
Move the GPIO and GPIO configuration headers into arch/arm/plat-samsung as they are common to all the Samsung SoCs. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
Move the gpio.c code containing the core gpiolib and GPIO support to plat-samsung from plat-s3c as it is used by all current Samsung SoCs. Note, we didn't move this to gpiolib.c as it contains code that is not strictly for gpiolib support and the 4bit code is already called gpiolib.c so make the change easier by not renaming both files in one go. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
Move the pm-gpio code into plat-samsung. Note, this should be changed later to properly compile the 4bit code if the 4bit settings are enabled. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Kukjin Kim 提交于
This patch adds Samsung's S5P6440 GPIO support. Signed-off-by: NAdityapratap Sharma <aditya.ps@samsung.com> Signed-off-by: NAtul Dahiya <atul.dahiya@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Kukjin Kim 提交于
This patch moves GPIO common functions (from plat-s3c64xx) into plat-samsung. and adds the config option to build the plat-samsung/gpiolib for Samsung SoCs. Signed-off-by: NAdityapratap Sharma <aditya.ps@samsung.com> Signed-off-by: NAtul Dahiya <atul.dahiya@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
Add a s3c24xx_mci_set_platdata() call for all the machine files that have platform data for the MCI driver. This brings the MCI device into line with the other devices with __initdata and a specific call to ensure the right structure type is being passed. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
There's no point in having these in until there is proper support for them, so remove as they only confuse the device changing script. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
Add a platform data helper for the OHCI device Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
Move s3c24xx_uart_devs, s3c24xx_uart_src and the platform devices to a common entry in plat-samsung since they are the same in all the current implementations. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
- 18 1月, 2010 5 次提交
-
-
由 Jassi Brar 提交于
Platform devices for SPI Controller of S3C64XX are defined and exported for machines to include. Also, controller setup helper functions are defined for machine code to set runtime configuration of the controller and the bus. Signed-off-by: NJassi Brar <jassi.brar@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Jassi Brar 提交于
We need a way to pass controller specific information to the SPI driver. For that purpose new headers are made. SPI Controller is assumed 'type-s3c64xx' and can be defined for newer SoCs. Hence, that part is placed under plat-samsung to be shared across newer SoCs. SoC specific part - spi source clocks, will be placed under plat-<soc>/include/plat/ Signed-off-by: NJassi Brar <jassi.brar@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Jassi Brar 提交于
Defined special 48MHz clock sources for SPI-0,1. Signed-off-by: NJassi Brar <jassi.brar@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Jassi Brar 提交于
Added SPI controller register base. Signed-off-by: NJassi Brar <jassi.brar@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
The call has been assuming all clksrc-clks' divider size is 4 bits, but this may not be the case anymore. Use the reg_div.size parameter to calculate the maximum value it can take and check against that. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-