For some firmware variants - specifically 'capture packed stream' - RSS
filters are not valid. We must check if RSS is actually active rather
than merely enabled.

Fixes: 42356d9a ("sfc: support RSS spreading of ethtool ntuple filters")
Signed-off-by: NBert Kenward <bkenward@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Syzkaller spotted an old bug which leads to reading skb beyond tail by 4
bytes on vlan tagged packets.
This is caused because skb_vlan_tagged_multi() did not check
skb_headlen.

BUG: KMSAN: uninit-value in eth_type_vlan include/linux/if_vlan.h:283 [inline]
BUG: KMSAN: uninit-value in skb_vlan_tagged_multi include/linux/if_vlan.h:656 [inline]
BUG: KMSAN: uninit-value in vlan_features_check include/linux/if_vlan.h:672 [inline]
BUG: KMSAN: uninit-value in dflt_features_check net/core/dev.c:2949 [inline]
BUG: KMSAN: uninit-value in netif_skb_features+0xd1b/0xdc0 net/core/dev.c:3009
CPU: 1 PID: 3582 Comm: syzkaller435149 Not tainted 4.16.0+ #82
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
  __dump_stack lib/dump_stack.c:17 [inline]
  dump_stack+0x185/0x1d0 lib/dump_stack.c:53
  kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067
  __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:676
  eth_type_vlan include/linux/if_vlan.h:283 [inline]
  skb_vlan_tagged_multi include/linux/if_vlan.h:656 [inline]
  vlan_features_check include/linux/if_vlan.h:672 [inline]
  dflt_features_check net/core/dev.c:2949 [inline]
  netif_skb_features+0xd1b/0xdc0 net/core/dev.c:3009
  validate_xmit_skb+0x89/0x1320 net/core/dev.c:3084
  __dev_queue_xmit+0x1cb2/0x2b60 net/core/dev.c:3549
  dev_queue_xmit+0x4b/0x60 net/core/dev.c:3590
  packet_snd net/packet/af_packet.c:2944 [inline]
  packet_sendmsg+0x7c57/0x8a10 net/packet/af_packet.c:2969
  sock_sendmsg_nosec net/socket.c:630 [inline]
  sock_sendmsg net/socket.c:640 [inline]
  sock_write_iter+0x3b9/0x470 net/socket.c:909
  do_iter_readv_writev+0x7bb/0x970 include/linux/fs.h:1776
  do_iter_write+0x30d/0xd40 fs/read_write.c:932
  vfs_writev fs/read_write.c:977 [inline]
  do_writev+0x3c9/0x830 fs/read_write.c:1012
  SYSC_writev+0x9b/0xb0 fs/read_write.c:1085
  SyS_writev+0x56/0x80 fs/read_write.c:1082
  do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
  entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x43ffa9
RSP: 002b:00007fff2cff3948 EFLAGS: 00000217 ORIG_RAX: 0000000000000014
RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 000000000043ffa9
RDX: 0000000000000001 RSI: 0000000020000080 RDI: 0000000000000003
RBP: 00000000006cb018 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000217 R12: 00000000004018d0
R13: 0000000000401960 R14: 0000000000000000 R15: 0000000000000000

Uninit was created at:
  kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline]
  kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:188
  kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:314
  kmsan_slab_alloc+0x11/0x20 mm/kmsan/kmsan.c:321
  slab_post_alloc_hook mm/slab.h:445 [inline]
  slab_alloc_node mm/slub.c:2737 [inline]
  __kmalloc_node_track_caller+0xaed/0x11c0 mm/slub.c:4369
  __kmalloc_reserve net/core/skbuff.c:138 [inline]
  __alloc_skb+0x2cf/0x9f0 net/core/skbuff.c:206
  alloc_skb include/linux/skbuff.h:984 [inline]
  alloc_skb_with_frags+0x1d4/0xb20 net/core/skbuff.c:5234
  sock_alloc_send_pskb+0xb56/0x1190 net/core/sock.c:2085
  packet_alloc_skb net/packet/af_packet.c:2803 [inline]
  packet_snd net/packet/af_packet.c:2894 [inline]
  packet_sendmsg+0x6444/0x8a10 net/packet/af_packet.c:2969
  sock_sendmsg_nosec net/socket.c:630 [inline]
  sock_sendmsg net/socket.c:640 [inline]
  sock_write_iter+0x3b9/0x470 net/socket.c:909
  do_iter_readv_writev+0x7bb/0x970 include/linux/fs.h:1776
  do_iter_write+0x30d/0xd40 fs/read_write.c:932
  vfs_writev fs/read_write.c:977 [inline]
  do_writev+0x3c9/0x830 fs/read_write.c:1012
  SYSC_writev+0x9b/0xb0 fs/read_write.c:1085
  SyS_writev+0x56/0x80 fs/read_write.c:1082
  do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
  entry_SYSCALL_64_after_hwframe+0x3d/0xa2

Fixes: 58e998c6 ("offloading: Force software GSO for multiple vlan tags.")
Reported-and-tested-by: syzbot+0bbe42c764feafa82c5a@syzkaller.appspotmail.com
Signed-off-by: NToshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

To ensure that qrtr can be loaded automatically, when needed, if it is compiled
as module.
Signed-off-by: NNicolas Dechesne <nicolas.dechesne@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit c1eef220 ("vsock: always call
vsock_init_tables()") introduced a module_init() function without a
corresponding module_exit() function.

Modules with an init function can only be removed if they also have an
exit function.  Therefore the vsock module was considered "permanent"
and could not be removed.

This patch adds an empty module_exit() function so that "rmmod vsock"
works.  No explicit cleanup is required because:

1. Transports call vsock_core_exit() upon exit and cannot be removed
   while sockets are still alive.
2. vsock_diag.ko does not perform any action that requires cleanup by
   vsock.ko.

Fixes: c1eef220 ("vsock: always call vsock_init_tables()")
Reported-by: NXiumei Mu <xmu@redhat.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NJorgen Hansen <jhansen@vmware.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Make lib/textsearch.c usable as kernel-doc.
Add textsearch() function family to kernel-api documentation.
Fix kernel-doc warnings in <linux/textsearch.h>:
  ../include/linux/textsearch.h:65: warning: Incorrect use of kernel-doc format:
	* get_next_block - fetch next block of data
  ../include/linux/textsearch.h:82: warning: Incorrect use of kernel-doc format:
	* finish - finalize/clean a series of get_next_block() calls
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Eric Dumazet says:

====================
tipc: Better check user provided attributes

syzbot reported a crash in __tipc_nl_net_set()

While fixing it, I also had to fix an old bug involving TIPC_NLA_NET_ADDR
====================
Acked-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

syzbot reported a crash in __tipc_nl_net_set() caused by NULL dereference.

We need to check that both TIPC_NLA_NET_NODEID and TIPC_NLA_NET_NODEID_W1
are present.

We also need to make sure userland provided u64 attributes.

Fixes: d50ccc2d ("tipc: add 128-bit node identifier")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Jon Maloy <jon.maloy@ericsson.com>
Cc: Ying Xue <ying.xue@windriver.com>
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Before syzbot/KMSAN bites, add the missing policy for TIPC_NLA_NET_ADDR

Fixes: 27c21416 ("tipc: add net set to new netlink api")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Jon Maloy <jon.maloy@ericsson.com>
Cc: Ying Xue <ying.xue@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It would allocate memory in this function when the cork->opt is NULL. But
the memory isn't freed if failed in the latter rt check, and return error
directly. It causes the memleak if its caller is ip_make_skb which also
doesn't free the cork->opt when meet a error.

Now move the rt check ahead to avoid the memleak.
Signed-off-by: NGao Feng <gfree.wind@vip.163.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In order to remove the race caught by syzbot [1], we need
to lock the socket before using po->tp_version as this could
change under us otherwise.

This means lock_sock() and release_sock() must be done by
packet_set_ring() callers.

[1] :
BUG: KMSAN: uninit-value in packet_set_ring+0x1254/0x3870 net/packet/af_packet.c:4249
CPU: 0 PID: 20195 Comm: syzkaller707632 Not tainted 4.16.0+ #83
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:17 [inline]
 dump_stack+0x185/0x1d0 lib/dump_stack.c:53
 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067
 __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:676
 packet_set_ring+0x1254/0x3870 net/packet/af_packet.c:4249
 packet_setsockopt+0x12c6/0x5a90 net/packet/af_packet.c:3662
 SYSC_setsockopt+0x4b8/0x570 net/socket.c:1849
 SyS_setsockopt+0x76/0xa0 net/socket.c:1828
 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x449099
RSP: 002b:00007f42b5307ce8 EFLAGS: 00000246 ORIG_RAX: 0000000000000036
RAX: ffffffffffffffda RBX: 000000000070003c RCX: 0000000000449099
RDX: 0000000000000005 RSI: 0000000000000107 RDI: 0000000000000003
RBP: 0000000000700038 R08: 000000000000001c R09: 0000000000000000
R10: 00000000200000c0 R11: 0000000000000246 R12: 0000000000000000
R13: 000000000080eecf R14: 00007f42b53089c0 R15: 0000000000000001

Local variable description: ----req_u@packet_setsockopt
Variable was created at:
 packet_setsockopt+0x13f/0x5a90 net/packet/af_packet.c:3612
 SYSC_setsockopt+0x4b8/0x570 net/socket.c:1849

Fixes: f6fb8f10 ("af-packet: TPACKET_V3 flexible buffer implementation.")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Due to a firmware bug, the hypervisor can send an interrupt to a
transmit or receive queue just prior to a partition migration, not
allowing the device enough time to handle it and send an EOI. When
the partition migrates, the interrupt is lost but an "EOI-pending"
flag for the interrupt line is still set in firmware. No further
interrupts will be sent until that flag is cleared, effectively
freezing that queue. To workaround this, the driver will disable the
hardware interrupt and send an H_EOI signal prior to re-enabling it.
This will flush the pending EOI and allow the driver to continue
operation.
Signed-off-by: NThomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Clear tp->packets_out when purging the write queue, otherwise
tcp_rearm_rto() mistakenly assumes TCP write queue is not empty.
This results in NULL pointer dereference.

Also, remove the redundant `tp->packets_out = 0` from
tcp_disconnect(), since tcp_disconnect() calls
tcp_write_queue_purge().

Fixes: a27fd7a8 (tcp: purge write queue upon RST)
Reported-by: NSubash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Reported-by: NSami Farin <hvtaifwkbgefbaei@gmail.com>
Tested-by: NSami Farin <hvtaifwkbgefbaei@gmail.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NSoheil Hassas Yeganeh <soheil@google.com>
Acked-by: NYuchung Cheng <ycheng@google.com>
Acked-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When parsing the options provided by the user space,
team_nl_cmd_options_set() insert them in a temporary list to send
multiple events with a single message.
While each option's attribute is correctly validated, the code does
not check for duplicate entries before inserting into the event
list.

Exploiting the above, the syzbot was able to trigger the following
splat:

kernel BUG at lib/list_debug.c:31!
invalid opcode: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
    (ftrace buffer empty)
Modules linked in:
CPU: 0 PID: 4466 Comm: syzkaller556835 Not tainted 4.16.0+ #17
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
RIP: 0010:__list_add_valid+0xaa/0xb0 lib/list_debug.c:29
RSP: 0018:ffff8801b04bf248 EFLAGS: 00010286
RAX: 0000000000000058 RBX: ffff8801c8fc7a90 RCX: 0000000000000000
RDX: 0000000000000058 RSI: ffffffff815fbf41 RDI: ffffed0036097e3f
RBP: ffff8801b04bf260 R08: ffff8801b0b2a700 R09: ffffed003b604f90
R10: ffffed003b604f90 R11: ffff8801db027c87 R12: ffff8801c8fc7a90
R13: ffff8801c8fc7a90 R14: dffffc0000000000 R15: 0000000000000000
FS:  0000000000b98880(0000) GS:ffff8801db000000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000043fc30 CR3: 00000001afe8e000 CR4: 00000000001406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
  __list_add include/linux/list.h:60 [inline]
  list_add include/linux/list.h:79 [inline]
  team_nl_cmd_options_set+0x9ff/0x12b0 drivers/net/team/team.c:2571
  genl_family_rcv_msg+0x889/0x1120 net/netlink/genetlink.c:599
  genl_rcv_msg+0xc6/0x170 net/netlink/genetlink.c:624
  netlink_rcv_skb+0x172/0x440 net/netlink/af_netlink.c:2448
  genl_rcv+0x28/0x40 net/netlink/genetlink.c:635
  netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline]
  netlink_unicast+0x58b/0x740 net/netlink/af_netlink.c:1336
  netlink_sendmsg+0x9f0/0xfa0 net/netlink/af_netlink.c:1901
  sock_sendmsg_nosec net/socket.c:629 [inline]
  sock_sendmsg+0xd5/0x120 net/socket.c:639
  ___sys_sendmsg+0x805/0x940 net/socket.c:2117
  __sys_sendmsg+0x115/0x270 net/socket.c:2155
  SYSC_sendmsg net/socket.c:2164 [inline]
  SyS_sendmsg+0x29/0x30 net/socket.c:2162
  do_syscall_64+0x29e/0x9d0 arch/x86/entry/common.c:287
  entry_SYSCALL_64_after_hwframe+0x42/0xb7
RIP: 0033:0x4458b9
RSP: 002b:00007ffd1d4a7278 EFLAGS: 00000213 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 000000000000001b RCX: 00000000004458b9
RDX: 0000000000000010 RSI: 0000000020000d00 RDI: 0000000000000004
RBP: 00000000004a74ed R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000213 R12: 00007ffd1d4a7348
R13: 0000000000402a60 R14: 0000000000000000 R15: 0000000000000000
Code: 75 e8 eb a9 48 89 f7 48 89 75 e8 e8 d1 85 7b fe 48 8b 75 e8 eb bb 48
89 f2 48 89 d9 4c 89 e6 48 c7 c7 a0 84 d8 87 e8 ea 67 28 fe <0f> 0b 0f 1f
40 00 48 b8 00 00 00 00 00 fc ff df 55 48 89 e5 41
RIP: __list_add_valid+0xaa/0xb0 lib/list_debug.c:29 RSP: ffff8801b04bf248

This changeset addresses the avoiding list_add() if the current
option is already present in the event list.

Reported-and-tested-by: syzbot+4d4af685432dc0e56c91@syzkaller.appspotmail.com
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Fixes: 2fcdb2c9 ("team: allow to send multiple set events in one message")
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Marvell's PPv2 controller has a Packet Header parser, which uses a
fixed-size TCAM array of filter entries.

The mvpp2 driver reserves some ranges among the 256 TCAM entries to
perform MAC and VID filtering. The rest of the TCAM ids are freely usable
for other features, such as IPv4 proto matching.

This commit fixes the MVPP2_PE_LAST_FREE_TID define that sets the end of
the "free range", which included the MAC range. This could therefore allow
some other features to use entries dedicated to MAC filtering,
lowering the number of unicast/multicast addresses that could be allowed
before switching to promiscuous mode.

Fixes: 10fea26c ("net: mvpp2: Add support for unicast filtering")
Signed-off-by: NMaxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch is just wrong, sorry.  I was trying to fix a static checker
warning and misread the code.  The reference taken in macsec_newlink()
is released in macsec_free_netdev() when the netdevice is destroyed.

This reverts commit 5dcd8400.
Reported-by: NLaura Abbott <labbott@redhat.com>
Fixes: 5dcd8400 ("macsec: missing dev_put() on error in macsec_newlink()")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NSabrina Dubroca <sd@queasysnail.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The tools are located at tootls/bpf/ instead of tools/net/.
Update the filter.txt doc.
Signed-off-by: NWang Sheng-Hui <shhuiw@foxmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Edward Cree says:

====================
sfc: ARFS fixes

Three issues introduced by my recent asynchronous filter handling changes:
1. The old filter_rfs_insert would replace a matching filter of equal
   priority; we need to pass the appropriate argument to filter_insert to
   make it do the same.
2. We're lying to the kernel with our return value from ndo_rx_flow_steer,
   so we need to lie consistently when calling rps_may_expire_flow.  This
   is only a partial fix, as the lie still prevents us from steering
   multiple flows with the same ID to different queues; a proper fix that
   stops us lying at all will hopefully follow later.
3. It's possible to cause the kernel to hammer ndo_rx_flow_steer very
   hard, so make sure we don't build up too huge a backlog of workitems.

Possibly it would be better to fix #3 on the kernel side; I have a patch
 which I think does that but it's not a regression in 4.17 so isn't 'net'
 material.
There's also the issue that we come up in the bad configuration that
 triggers #3 by default, but that too is a problem for another time.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A misconfigured system (e.g. with all interrupts affinitised to all CPUs)
 may produce a storm of ARFS steering events.  With the existing sfc ARFS
 implementation, that could create a backlog of workitems that grinds the
 system to a halt.  To prevent this, limit the number of workitems that
 may be in flight for a given SFC device to 8 (EFX_RPS_MAX_IN_FLIGHT), and
 return EBUSY from our ndo_rx_flow_steer method if the limit is reached.
Given this limit, also store the workitems in an array of slots within the
 struct efx_nic, rather than dynamically allocating for each request.
The limit should not negatively impact performance, because it is only
 likely to be hit in cases where ARFS will be ineffective anyway.
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When we inserted an ARFS filter for ndo_rx_flow_steer(), we didn't know
 what the filter ID would be, so we just returned 0.  Thus, we must also
 pass 0 as the filter ID when calling rps_may_expire_flow() for it, and
 rely on the flow_id to identify what we're talking about.

Fixes: 3af0f342 ("sfc: replace asynchronous filter operations")
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Necessary to allow redirecting a flow when the application moves.

Fixes: 3af0f342 ("sfc: replace asynchronous filter operations")
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Guillaume Nault says:

====================
l2tp: remove unsafe calls to l2tp_tunnel_find_nth()

Using l2tp_tunnel_find_nth() is racy, because the returned tunnel can
go away as soon as this function returns. This series introduce
l2tp_tunnel_get_nth() as a safe replacement to fixes these races.

With this series, all unsafe tunnel/session lookups are finally gone.
====================
Acked-by: NJason Wang <jasowang@redhat.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use l2tp_tunnel_get_nth() instead of l2tp_tunnel_find_nth(), to be safe
against concurrent tunnel deletion.

Use the same mechanism as in l2tp_ppp.c for dropping the reference
taken by l2tp_tunnel_get_nth(). That is, drop the reference just
before looking up the next tunnel. In case of error, drop the last
accessed tunnel in l2tp_dfs_seq_stop().

That was the last use of l2tp_tunnel_find_nth().

Fixes: 0ad66140 ("l2tp: Add debugfs files for dumping l2tp debug info")
Signed-off-by: NGuillaume Nault <g.nault@alphalink.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use l2tp_tunnel_get_nth() instead of l2tp_tunnel_find_nth(), to be safe
against concurrent tunnel deletion.

Unlike sessions, we can't drop the reference held on tunnels in
pppol2tp_seq_show(). Tunnels are reused across several calls to
pppol2tp_seq_start() when iterating over sessions. These iterations
need the tunnel for accessing the next session. Therefore the only safe
moment for dropping the reference is just before searching for the next
tunnel.

Normally, the last invocation of pppol2tp_next_tunnel() doesn't find
any new tunnel, so it drops the last tunnel without taking any new
reference. However, in case of error, pppol2tp_seq_stop() is called
directly, so we have to drop the reference there.

Fixes: fd558d18 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts")
Signed-off-by: NGuillaume Nault <g.nault@alphalink.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

l2tp_tunnel_find_nth() is unsafe: no reference is held on the returned
tunnel, therefore it can be freed whenever the caller uses it.
This patch defines l2tp_tunnel_get_nth() which works similarly, but
also takes a reference on the returned tunnel. The caller then has to
drop it after it stops using the tunnel.

Convert netlink dumps to make them safe against concurrent tunnel
deletion.

Fixes: 309795f4 ("l2tp: Add netlink control API for L2TP")
Signed-off-by: NGuillaume Nault <g.nault@alphalink.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We tends to batch submitting packets during XDP_TX. This requires to
kick virtqueue after a batch, we tried to do it through
xdp_do_flush_map() which only makes sense for devmap not XDP_TX. So
explicitly kick the virtqueue in this case.
Reported-by: NKimitoshi Takahashi <ktaka@nii.ac.jp>
Tested-by: NKimitoshi Takahashi <ktaka@nii.ac.jp>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Fixes: 186b3c99 ("virtio-net: support XDP_REDIRECT")
Signed-off-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The DSA stack passes received PTP frames to this driver via
mv88e6xxx_port_rxtstamp() for deferred delivery.  The driver then
queues the frame and kicks the worker thread.  The work callback reads
out the latched receive time stamp and then works through the queue,
delivering any non-matching frames without a time stamp.

If a new frame arrives after the worker thread has read out the time
stamp register but enters the queue before the worker finishes
processing the queue, that frame will be delivered without a time
stamp.

This patch fixes the race by moving the queue onto a list on the stack
before reading out the latched time stamp value.

Fixes: c6fe0ad2 ("net: dsa: mv88e6xxx: add rx/tx timestamping support")
Signed-off-by: NRichard Cochran <richardcochran@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When coming from ndisc_netdev_event() in net/ipv6/ndisc.c,
neigh_ifdown() is called with &nd_tbl, locking this while
clearing the proxy neighbor entries when eg. deleting an
interface. Calling the table's pndisc_destructor() with the
lock still held, however, can cause a deadlock: When a
multicast listener is available an IGMP packet of type
ICMPV6_MGM_REDUCTION may be sent out. When reaching
ip6_finish_output2(), if no neighbor entry for the target
address is found, __neigh_create() is called with &nd_tbl,
which it'll want to lock.

Move the elements into their own list, then unlock the table
and perform the destruction.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199289
Fixes: 6fd6ce20 ("ipv6: Do not depend on rt->n in ip6_finish_output2().")
Signed-off-by: NWolfgang Bumiller <w.bumiller@proxmox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

pf->cmp_addr() is called before binding a v6 address to the sock. It
should not check ports, like in sctp_inet_cmp_addr.

But sctp_inet6_cmp_addr checks the addr by invoking af(6)->cmp_addr,
sctp_v6_cmp_addr where it also compares the ports.

This would cause that setsockopt(SCTP_SOCKOPT_BINDX_ADD) could bind
multiple duplicated IPv6 addresses after Commit 40b4f0fd ("sctp:
lack the check for ports in sctp_v6_cmp_addr").

This patch is to remove af->cmp_addr called in sctp_inet6_cmp_addr,
but do the proper check for both v6 addrs and v4mapped addrs.

v1->v2:
  - define __sctp_v6_cmp_addr to do the common address comparison
    used for both pf and af v6 cmp_addr.

Fixes: 40b4f0fd ("sctp: lack the check for ports in sctp_v6_cmp_addr")
Reported-by: NJianwen Ji <jiji@redhat.com>
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge branch 'nfp-improve-signal-handing-on-FW-waits-and-flower-control-message-Jakub Kicinski says:

====================
nfp: improve signal handing on FW waits and flower control message processing

The first part of this set aims to improve handling of interrupted
waits.  Patch 1 makes waiting for management FW responses
uninterruptible while patch 2 adds a message when signal arrives
while waiting for an NFP mutex.  We can't interrupt execution of
FW commands so uninterruptible sleep seems reasonable there.
Exiting a wait for a mutex should be clean and have no side affects
so we are allowing to abort it.  Note that both waits have rather
large timeouts (tens of seconds).

Patches 3 and 4 improve flower offload operation under heavy load.
Currently there is no cap on the number of queued FW notifications.
Some of the notifications have to be processed from a workqueue
which may lead to very large number of messages getting queued
if workqueue never gets a chance to run.  Pieter puts a limit
on number of queued messages, tries to drop some messages we ignore
without queuing and process more important messages first.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
processing'

Introduce a second skb list for handling control messages and limit the
number of allowed messages. Some control messages are considered more
crucial than others, resulting in the need for a second skb list. By
splitting the list into a separate high and low priority list we can
ensure that messages on the high list get added to the head of the list
that gets processed, this however has no functional impact. Previously
there was no limit on the number of messages allowed on the queue, this
could result in the queue growing boundlessly and eventually the host
running out of memory.

Fixes: b985f870 ("nfp: process control messages in workqueue in flower app")
Signed-off-by: NPieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NSimon Horman <simon.horman@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Previously we processed the route ack control messages in the workqueue,
this unnecessarily loads the workqueue. We can deal with these messages
sooner as we know we are going to drop them.

Fixes: 8e6a9046 ("nfp: flower vxlan neighbour offload")
Signed-off-by: NPieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NSimon Horman <simon.horman@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When waiting for an NFP mutex is interrupted print a message
to make root causing later error messages easier.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NDirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We currently allow signals to interrupt the wait for management FW
commands.  Exiting the wait should not cause trouble, the FW will
just finish executing the command in the background and new commands
will wait for the old one to finish.

However, this may not be what users expect (Ctrl-C not actually stopping
the command).  Moreover some systems routinely request link information
with signals pending (Ubuntu 14.04 runs a landscape-sysinfo python tool
from MOTD) worrying users with errors like these:

nfp 0000:04:00.0: nfp_nsp: Error -512 waiting for code 0x0007 to start
nfp 0000:04:00.0: nfp: reading port table failed -512

Make the wait for management FW responses non-interruptible.

Fixes: 1a64821c ("nfp: add support for service processor access")
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NDirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The stack variable 'dnode' in __tipc_sendmsg() may theoretically
end up tipc_node_get_mtu() as an unitilalized variable.

We fix this by intializing the variable at declaration. We also add
a default else clause to the two conditional ones already there, so
that we never end up in the named function if the given address
type is illegal.

Reported-by: syzbot+b0975ce9355b347c1546@syzkaller.appspotmail.com
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

strp_data_ready resets strp->need_bytes to 0 if strp_peek_len indicates
that the remainder of the message has been received. However,
do_strp_work does not reset strp->need_bytes to 0. If do_strp_work
completes a partial message, the value of strp->need_bytes will continue
to reflect the needed bytes of the previous message, causing
future invocations of strp_data_ready to return early if
strp->need_bytes is less than strp_peek_len. Resetting strp->need_bytes
to 0 in __strp_recv on handing a full message to the upper layer solves
this problem.

__strp_recv also calculates strp->need_bytes using stm->accum_len before
stm->accum_len has been incremented by cand_len. This can cause
strp->need_bytes to be equal to the full length of the message instead
of the full length minus the accumulated length. This, in turn, causes
strp_data_ready to return early, even when there is sufficient data to
complete the partial message. Incrementing stm->accum_len before using
it to calculate strp->need_bytes solves this problem.

Found while testing net/tls_sw recv path.

Fixes: 43a0c675 ("strparser: Stream parser for messages")
Signed-off-by: NDoron Roberts-Kedes <doronrk@fb.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Script in_netns.sh isn't installed.
--------------------
running psock_fanout test
--------------------
./run_afpackettests: line 12: ./in_netns.sh: No such file or directory
[FAIL]
--------------------
running psock_tpacket test
--------------------
./run_afpackettests: line 22: ./in_netns.sh: No such file or directory
[FAIL]

In current code added in_netns.sh to be installed.

Fixes: cc30c93f ("selftests/net: ignore background traffic in psock_fanout")
Signed-off-by: NAnders Roxell <anders.roxell@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Nathan Fontenot says:

====================
ibmvnic: Fix parameter change request handling

When updating parameters for the ibmvnic driver there is a possibility
of entering an infinite loop if a return value other that a partial
success is received from sending the login CRQ.

Also, a deadlock can occur on the rtnl lock if netdev_notify_peers()
is called during driver reset for a parameter change reset.

This patch set corrects both of these issues by updating the return
code handling in ibmvnic_login() nand gaurding against calling
netdev_notify_peers() for parameter change requests.

Updates for V2: Correct spelling mistakes in commit messages.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When attempting to change the driver parameters, such as the MTU
value or number of queues, do not call netdev_notify_peers().
Doing so will deadlock on the rtnl_lock.
Signed-off-by: NNathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is a bug in handling the possible return codes from sending the
login CRQ. The current code treats any non-success return value,
minus failure to send the crq and a timeout waiting for a login response,
as a need to re-send the login CRQ. This can put the drive in an
infinite loop of trying to login when getting return values other
that a partial success such as a return code of aborted. For these
scenarios the login will not ever succeed at this point and the
driver would need to be reset again.

To resolve this loop trying to login is updated to only retry the
login if the driver gets a return code of a partial success. Other
return codes are treated as an error and the driver returns an error
from ibmvnic_login().

To avoid infinite looping in the partial success return cases, the
number of retries is capped at the maximum number of supported
queues. This value was chosen because the driver does a renegotiation
of capabilities which sets the number of queues possible and allows
the driver to attempt a login for possible value for the number
of queues supported.
Signed-off-by: NNathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since neigh_dump_table() calls nlmsg_parse() without giving policy
constraints, attributes can have arbirary size that we must validate

Reported by syzbot/KMSAN :

BUG: KMSAN: uninit-value in neigh_master_filtered net/core/neighbour.c:2292 [inline]
BUG: KMSAN: uninit-value in neigh_dump_table net/core/neighbour.c:2348 [inline]
BUG: KMSAN: uninit-value in neigh_dump_info+0x1af0/0x2250 net/core/neighbour.c:2438
CPU: 1 PID: 3575 Comm: syzkaller268891 Not tainted 4.16.0+ #83
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:17 [inline]
 dump_stack+0x185/0x1d0 lib/dump_stack.c:53
 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067
 __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:676
 neigh_master_filtered net/core/neighbour.c:2292 [inline]
 neigh_dump_table net/core/neighbour.c:2348 [inline]
 neigh_dump_info+0x1af0/0x2250 net/core/neighbour.c:2438
 netlink_dump+0x9ad/0x1540 net/netlink/af_netlink.c:2225
 __netlink_dump_start+0x1167/0x12a0 net/netlink/af_netlink.c:2322
 netlink_dump_start include/linux/netlink.h:214 [inline]
 rtnetlink_rcv_msg+0x1435/0x1560 net/core/rtnetlink.c:4598
 netlink_rcv_skb+0x355/0x5f0 net/netlink/af_netlink.c:2447
 rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:4653
 netlink_unicast_kernel net/netlink/af_netlink.c:1311 [inline]
 netlink_unicast+0x1672/0x1750 net/netlink/af_netlink.c:1337
 netlink_sendmsg+0x1048/0x1310 net/netlink/af_netlink.c:1900
 sock_sendmsg_nosec net/socket.c:630 [inline]
 sock_sendmsg net/socket.c:640 [inline]
 ___sys_sendmsg+0xec0/0x1310 net/socket.c:2046
 __sys_sendmsg net/socket.c:2080 [inline]
 SYSC_sendmsg+0x2a3/0x3d0 net/socket.c:2091
 SyS_sendmsg+0x54/0x80 net/socket.c:2087
 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x43fed9
RSP: 002b:00007ffddbee2798 EFLAGS: 00000213 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 000000000043fed9
RDX: 0000000000000000 RSI: 0000000020005000 RDI: 0000000000000003
RBP: 00000000006ca018 R08: 00000000004002c8 R09: 00000000004002c8
R10: 00000000004002c8 R11: 0000000000000213 R12: 0000000000401800
R13: 0000000000401890 R14: 0000000000000000 R15: 0000000000000000

Uninit was created at:
 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline]
 kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:188
 kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:314
 kmsan_slab_alloc+0x11/0x20 mm/kmsan/kmsan.c:321
 slab_post_alloc_hook mm/slab.h:445 [inline]
 slab_alloc_node mm/slub.c:2737 [inline]
 __kmalloc_node_track_caller+0xaed/0x11c0 mm/slub.c:4369
 __kmalloc_reserve net/core/skbuff.c:138 [inline]
 __alloc_skb+0x2cf/0x9f0 net/core/skbuff.c:206
 alloc_skb include/linux/skbuff.h:984 [inline]
 netlink_alloc_large_skb net/netlink/af_netlink.c:1183 [inline]
 netlink_sendmsg+0x9a6/0x1310 net/netlink/af_netlink.c:1875
 sock_sendmsg_nosec net/socket.c:630 [inline]
 sock_sendmsg net/socket.c:640 [inline]
 ___sys_sendmsg+0xec0/0x1310 net/socket.c:2046
 __sys_sendmsg net/socket.c:2080 [inline]
 SYSC_sendmsg+0x2a3/0x3d0 net/socket.c:2091
 SyS_sendmsg+0x54/0x80 net/socket.c:2087
 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x3d/0xa2

Fixes: 21fdd092 ("net: Add support for filtering neigh dump by master device")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: David Ahern <dsa@cumulusnetworks.com>
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Acked-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>