- 20 10月, 2016 4 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull scheduler fix from Ingo Molnar: "This fixes a group scheduling related performance/interactivity regression introduced in v4.8, which affects certain hardware environments where cpu_possible_mask != cpu_present_mask" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/fair: Fix incorrect task group ->load_avg
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid由 Linus Torvalds 提交于
Pull HID fixes from Jiri Kosina: - hid-dr regression fix for certain dragonrise gamepads (device ID 0079:0006), from Ioan-Adrian Ratiu - dma-on-stack fix for hid-led driver, from Heiner Kallweit - quirk for Akai MIDImix device * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: add quirk for Akai MIDImix. Revert "HID: dragonrise: fix HID Descriptor for 0x0006 PID" HID: hid-dr: add input mapping for axis selection HID: hid-led: fix issue with transfer buffer not being dma capable
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl由 Linus Torvalds 提交于
Pull first round of pin control fixes from Linus Walleij: - a bunch of barnsjukdomar/kinderkrankheiten/maladie infantile in the Aspeed driver. (Why doesn't English have a word for this?) [ Maybe "teething problems" is the closest English idiom? - Linus T ] - fix a lockdep bug on the Intel BayTrail. - fix a few special laptop issues on the Intel pin controller solving suspend issues. * tag 'pinctrl-v4.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: intel: Only restore pins that are used by the driver pinctrl: baytrail: Fix lockdep pinctrl: aspeed-g5: Fix pin association of SPI1 function pinctrl: aspeed-g5: Fix GPIOE1 typo pinctrl: aspeed-g5: Fix names of GPID2 pins pinctrl: aspeed: "Not enabled" is a significant mux state
-
由 Linus Torvalds 提交于
We have a fairly common pattern where you print several things as continuations on one single line in a loop, and then at the end you do printk(KERN_CONT "\n"); to flush the buffered output. But if the output was flushed by something else (concurrent printk activity, or just system logging), we don't want that final flushing to just print an empty line. So just suppress empty continuation lines when they couldn't be merged into the line they are a continuation of. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 19 10月, 2016 20 次提交
-
-
由 Linus Torvalds 提交于
Merge the gup_flags cleanups from Lorenzo Stoakes: "This patch series adjusts functions in the get_user_pages* family such that desired FOLL_* flags are passed as an argument rather than implied by flags. The purpose of this change is to make the use of FOLL_FORCE explicit so it is easier to grep for and clearer to callers that this flag is being used. The use of FOLL_FORCE is an issue as it overrides missing VM_READ/VM_WRITE flags for the VMA whose pages we are reading from/writing to, which can result in surprising behaviour. The patch series came out of the discussion around commit 38e08854 ("mm: check VMA flags to avoid invalid PROT_NONE NUMA balancing"), which addressed a BUG_ON() being triggered when a page was faulted in with PROT_NONE set but having been overridden by FOLL_FORCE. do_numa_page() was run on the assumption the page _must_ be one marked for NUMA node migration as an actual PROT_NONE page would have been dealt with prior to this code path, however FOLL_FORCE introduced a situation where this assumption did not hold. See https://marc.info/?l=linux-mm&m=147585445805166 for the patch proposal" Additionally, there's a fix for an ancient bug related to FOLL_FORCE and FOLL_WRITE by me. [ This branch was rebased recently to add a few more acked-by's and reviewed-by's ] * gup_flag-cleanups: mm: replace access_process_vm() write parameter with gup_flags mm: replace access_remote_vm() write parameter with gup_flags mm: replace __access_remote_vm() write parameter with gup_flags mm: replace get_user_pages_remote() write/force parameters with gup_flags mm: replace get_user_pages() write/force parameters with gup_flags mm: replace get_vaddr_frames() write/force parameters with gup_flags mm: replace get_user_pages_locked() write/force parameters with gup_flags mm: replace get_user_pages_unlocked() write/force parameters with gup_flags mm: remove write/force parameters from __get_user_pages_unlocked() mm: remove write/force parameters from __get_user_pages_locked() mm: remove gup_flags FOLL_WRITE games from __get_user_pages()
-
由 Lorenzo Stoakes 提交于
This removes the 'write' argument from access_process_vm() and replaces it with 'gup_flags' as use of this function previously silently implied FOLL_FORCE, whereas after this patch callers explicitly pass this flag. We make this explicit as use of FOLL_FORCE can result in surprising behaviour (and hence bugs) within the mm subsystem. Signed-off-by: NLorenzo Stoakes <lstoakes@gmail.com> Acked-by: NJesper Nilsson <jesper.nilsson@axis.com> Acked-by: NMichal Hocko <mhocko@suse.com> Acked-by: NMichael Ellerman <mpe@ellerman.id.au> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Lorenzo Stoakes 提交于
This removes the 'write' argument from access_remote_vm() and replaces it with 'gup_flags' as use of this function previously silently implied FOLL_FORCE, whereas after this patch callers explicitly pass this flag. We make this explicit as use of FOLL_FORCE can result in surprising behaviour (and hence bugs) within the mm subsystem. Signed-off-by: NLorenzo Stoakes <lstoakes@gmail.com> Acked-by: NMichal Hocko <mhocko@suse.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Lorenzo Stoakes 提交于
This removes the 'write' argument from __access_remote_vm() and replaces it with 'gup_flags' as use of this function previously silently implied FOLL_FORCE, whereas after this patch callers explicitly pass this flag. We make this explicit as use of FOLL_FORCE can result in surprising behaviour (and hence bugs) within the mm subsystem. Signed-off-by: NLorenzo Stoakes <lstoakes@gmail.com> Acked-by: NMichal Hocko <mhocko@suse.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Lorenzo Stoakes 提交于
This removes the 'write' and 'force' from get_user_pages_remote() and replaces them with 'gup_flags' to make the use of FOLL_FORCE explicit in callers as use of this flag can result in surprising behaviour (and hence bugs) within the mm subsystem. Signed-off-by: NLorenzo Stoakes <lstoakes@gmail.com> Acked-by: NMichal Hocko <mhocko@suse.com> Reviewed-by: NJan Kara <jack@suse.cz> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Lorenzo Stoakes 提交于
This removes the 'write' and 'force' from get_user_pages() and replaces them with 'gup_flags' to make the use of FOLL_FORCE explicit in callers as use of this flag can result in surprising behaviour (and hence bugs) within the mm subsystem. Signed-off-by: NLorenzo Stoakes <lstoakes@gmail.com> Acked-by: NChristian König <christian.koenig@amd.com> Acked-by: NJesper Nilsson <jesper.nilsson@axis.com> Acked-by: NMichal Hocko <mhocko@suse.com> Reviewed-by: NJan Kara <jack@suse.cz> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Lorenzo Stoakes 提交于
This removes the 'write' and 'force' from get_vaddr_frames() and replaces them with 'gup_flags' to make the use of FOLL_FORCE explicit in callers as use of this flag can result in surprising behaviour (and hence bugs) within the mm subsystem. Signed-off-by: NLorenzo Stoakes <lstoakes@gmail.com> Acked-by: NMichal Hocko <mhocko@suse.com> Reviewed-by: NJan Kara <jack@suse.cz> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Lorenzo Stoakes 提交于
This removes the 'write' and 'force' use from get_user_pages_locked() and replaces them with 'gup_flags' to make the use of FOLL_FORCE explicit in callers as use of this flag can result in surprising behaviour (and hence bugs) within the mm subsystem. Signed-off-by: NLorenzo Stoakes <lstoakes@gmail.com> Acked-by: NMichal Hocko <mhocko@suse.com> Reviewed-by: NJan Kara <jack@suse.cz> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vincent Guittot 提交于
A scheduler performance regression has been reported by Joseph Salisbury, which he bisected back to: 3d30544f ("sched/fair: Apply more PELT fixes) The regression triggers when several levels of task groups are involved (read: SystemD) and cpu_possible_mask != cpu_present_mask. The root cause is that group entity's load (tg_child->se[i]->avg.load_avg) is initialized to scale_load_down(se->load.weight). During the creation of a child task group, its group entities on possible CPUs are attached to parent's cfs_rq (tg_parent) and their loads are added to the parent's load (tg_parent->load_avg) with update_tg_load_avg(). But only the load on online CPUs will then be updated to reflect real load, whereas load on other CPUs will stay at the initial value. The result is a tg_parent->load_avg that is higher than the real load, the weight of group entities (tg_parent->se[i]->load.weight) on online CPUs is smaller than it should be, and the task group gets a less running time than what it could expect. ( This situation can be detected with /proc/sched_debug. The ".tg_load_avg" of the task group will be much higher than sum of ".tg_load_avg_contrib" of online cfs_rqs of the task group. ) The load of group entities don't have to be intialized to something else than 0 because their load will increase when an entity is attached. Reported-by: NJoseph Salisbury <joseph.salisbury@canonical.com> Tested-by: NDietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: NVincent Guittot <vincent.guittot@linaro.org> Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: <stable@vger.kernel.org> # 4.8.x Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: joonwoop@codeaurora.org Fixes: 3d30544f ("sched/fair: Apply more PELT fixes) Link: http://lkml.kernel.org/r/1476881123-10159-1-git-send-email-vincent.guittot@linaro.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs由 Linus Torvalds 提交于
Pull f2fs bugfix from Jaegeuk Kim: "This fixes a bug which referenced the wrong pointer, sum_page, in f2fs_gc. It was newly introduced in 4.9-rc1. * tag 'for-f2fs-4.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: f2fs: fix wrong sum_page pointer in f2fs_gc
-
由 Lorenzo Stoakes 提交于
This removes the 'write' and 'force' use from get_user_pages_unlocked() and replaces them with 'gup_flags' to make the use of FOLL_FORCE explicit in callers as use of this flag can result in surprising behaviour (and hence bugs) within the mm subsystem. Signed-off-by: NLorenzo Stoakes <lstoakes@gmail.com> Reviewed-by: NJan Kara <jack@suse.cz> Acked-by: NMichal Hocko <mhocko@suse.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Lorenzo Stoakes 提交于
This removes the redundant 'write' and 'force' parameters from __get_user_pages_unlocked() to make the use of FOLL_FORCE explicit in callers as use of this flag can result in surprising behaviour (and hence bugs) within the mm subsystem. Signed-off-by: NLorenzo Stoakes <lstoakes@gmail.com> Acked-by: NPaolo Bonzini <pbonzini@redhat.com> Reviewed-by: NJan Kara <jack@suse.cz> Acked-by: NMichal Hocko <mhocko@suse.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Lorenzo Stoakes 提交于
This removes the redundant 'write' and 'force' parameters from __get_user_pages_locked() to make the use of FOLL_FORCE explicit in callers as use of this flag can result in surprising behaviour (and hence bugs) within the mm subsystem. Signed-off-by: NLorenzo Stoakes <lstoakes@gmail.com> Reviewed-by: NJan Kara <jack@suse.cz> Acked-by: NMichal Hocko <mhocko@suse.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
This is an ancient bug that was actually attempted to be fixed once (badly) by me eleven years ago in commit 4ceb5db9 ("Fix get_user_pages() race for write access") but that was then undone due to problems on s390 by commit f33ea7f4 ("fix get_user_pages bug"). In the meantime, the s390 situation has long been fixed, and we can now fix it by checking the pte_dirty() bit properly (and do it better). The s390 dirty bit was implemented in abf09bed ("s390/mm: implement software dirty bits") which made it into v3.9. Earlier kernels will have to look at the page state itself. Also, the VM has become more scalable, and what used a purely theoretical race back then has become easier to trigger. To fix it, we introduce a new internal FOLL_COW flag to mark the "yes, we already did a COW" rather than play racy games with FOLL_WRITE that is very fundamental, and then use the pte dirty flag to validate that the FOLL_COW flag is still valid. Reported-and-tested-by: NPhil "not Paul" Oester <kernel@linuxace.com> Acked-by: NHugh Dickins <hughd@google.com> Reviewed-by: NMichal Hocko <mhocko@suse.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Nick Piggin <npiggin@gmail.com> Cc: Greg Thelen <gthelen@google.com> Cc: stable@vger.kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Ingo Molnar: "Misc fixes, plus hw-enablement changes: - fix persistent RAM handling - remove pkeys warning - remove duplicate macro - fix debug warning in irq handler - add new 'Knights Mill' CPU related constants and enable the perf bits" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel/uncore: Add Knights Mill CPUID perf/x86/intel/rapl: Add Knights Mill CPUID perf/x86/intel: Add Knights Mill CPUID x86/cpu/intel: Add Knights Mill to Intel family x86/e820: Don't merge consecutive E820_PRAM ranges pkeys: Remove easily triggered WARN x86: Remove duplicate rtit status MSR macro x86/smp: Add irq_enter/exit() in smp_reschedule_interrupt()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull timer fixlet from Ingo Molnar: "Remove an unused variable" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: alarmtimer: Remove unused but set variable
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull scheduler fix from Ingo Molnar: "Fix a crash that can trigger when racing with CPU hotplug: we didn't use sched-domains data structures carefully enough in select_idle_cpu()" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/fair: Fix sched domains NULL dereference in select_idle_sibling()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf fixes from Ingo Molnar: "Four tooling fixes, two kprobes KASAN related fixes and an x86 PMU driver fix/cleanup" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf jit: Fix build issue on Ubuntu perf jevents: Handle events including .c and .o perf/x86/intel: Remove an inconsistent NULL check kprobes: Unpoison stack in jprobe_return() for KASAN kprobes: Avoid false KASAN reports during stack copy perf header: Set nr_numa_nodes only when we parsed all the data perf top: Fix refreshing hierarchy entries on TUI
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull locking fixes from Ingo Molnar: "Two fixes: - a file locks fix (missing critical section, bug introduced in this merge window) - an x86 down_write() stack frame annotation" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking, fs/locks: Add missing file_sem locks locking/rwsem/x86: Add stack frame dependency for ____down_write()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull irq fixes from Ingo Molnar: "Three irqchip driver fixes" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gicv3: Handle loop timeout proper irqchip/jcore: Fix lost per-cpu interrupts irqchip/eznps: Acknowledge NPS_IPI before calling the handler
-
- 18 10月, 2016 14 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull misc fixes from Ingo Molnar: "A CPU hotplug debuggability fix and three objtool false positive warnings fixes for new GCC6 code generation patterns" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: cpu/hotplug: Use distinct name for cpu_hotplug.dep_map objtool: Skip all "unreachable instruction" warnings for gcov kernels objtool: Improve rare switch jump table pattern detection objtool: Support '-mtune=atom' stack frame setup instruction
-
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394由 Linus Torvalds 提交于
Pull firewire fixlet from Stefan Richter: "IEEE 1394 subsystem patch: catch an initialization error in the packet sniffer nosy" * tag 'firewire-update' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: nosy: do not ignore errors in ioremap_nocache()
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "Just had a couple of amdgpu fixes and one core fix I wanted to get out early to fix some regressions. I'm sure I'll have more stuff this week for -rc2" * tag 'drm-fixes-for-v4.9-rc2' of git://people.freedesktop.org/~airlied/linux: (22 commits) drm: Print device information again in debugfs drm/amd/powerplay: fix bug stop dpm can't work on Vi. drm/amd/powerplay: notify smu no display by default. drm/amdgpu/dpm: implement thermal sensor for CZ/ST drm/amdgpu/powerplay: implement thermal sensor for CZ/ST drm/amdgpu: disable smu hw first on tear down drm/amdgpu: fix amdgpu_need_full_reset (v2) drm/amdgpu/si_dpm: Limit clocks on HD86xx part drm/amd/powerplay: fix static checker warnings in smu7_hwmgr.c drm/amdgpu: potential NULL dereference in debugfs code drm/amd/powerplay: fix static checker warnings in smu7_hwmgr.c drm/amd/powerplay: fix static checker warnings in iceland_smc.c drm/radeon: change vblank_time's calculation method to reduce computational error. drm/amdgpu: change vblank_time's calculation method to reduce computational error. drm/amdgpu: clarify UVD/VCE special handling for CG drm/amd/amdgpu: enable clockgating only after late init drm/radeon: allow TA_CS_BC_BASE_ADDR on SI drm/amdgpu: initialize the context reset_counter in amdgpu_ctx_init drm/amdgpu/gfx8: fix CGCG_CGLS handling drm/radeon: fix modeset tear down code ...
-
由 Mika Westerberg 提交于
Dell XPS 13 (and maybe some others) uses a GPIO (CPU_GP_1) during suspend to explicitly disable USB touchscreen interrupt. This is done to prevent situation where the lid is closed the touchscreen is left functional. The pinctrl driver (wrongly) assumes it owns all pins which are owned by host and not locked down. It is perfectly fine for BIOS to use those pins as it is also considered as host in this context. What happens is that when the lid of Dell XPS 13 is closed, the BIOS configures CPU_GP_1 low disabling the touchscreen interrupt. During resume we restore all host owned pins to the known state which includes CPU_GP_1 and this overwrites what the BIOS has programmed there causing the touchscreen to fail as no interrupts are reaching the CPU anymore. Fix this by restoring only those pins we know are explicitly requested by the kernel one way or other. Cc: stable@vger.kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=176361Reported-by: NAceLan Kao <acelan.kao@canonical.com> Tested-by: NAceLan Kao <acelan.kao@canonical.com> Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Ville Syrjälä 提交于
Initialize the spinlock before using it. INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 2 PID: 1 Comm: swapper/0 Not tainted 4.8.0-dwc-bisect #4 Hardware name: Intel Corp. VALLEYVIEW C0 PLATFORM/BYT-T FFD8, BIOS BLAKFF81.X64.0088.R10.1403240443 FFD8_X64_R_2014_13_1_00 03/24/2014 0000000000000000 ffff8800788ff770 ffffffff8133d597 0000000000000000 0000000000000000 ffff8800788ff7e0 ffffffff810cfb9e 0000000000000002 ffff8800788ff7d0 ffffffff8205b600 0000000000000002 ffff8800788ff7f0 Call Trace: [<ffffffff8133d597>] dump_stack+0x67/0x90 [<ffffffff810cfb9e>] register_lock_class+0x52e/0x540 [<ffffffff810d2081>] __lock_acquire+0x81/0x16b0 [<ffffffff810cede1>] ? save_trace+0x41/0xd0 [<ffffffff810d33b2>] ? __lock_acquire+0x13b2/0x16b0 [<ffffffff810cf05a>] ? __lock_is_held+0x4a/0x70 [<ffffffff810d3b1a>] lock_acquire+0xba/0x220 [<ffffffff8136f1fe>] ? byt_gpio_get_direction+0x3e/0x80 [<ffffffff81631567>] _raw_spin_lock_irqsave+0x47/0x60 [<ffffffff8136f1fe>] ? byt_gpio_get_direction+0x3e/0x80 [<ffffffff8136f1fe>] byt_gpio_get_direction+0x3e/0x80 [<ffffffff813740a9>] gpiochip_add_data+0x319/0x7d0 [<ffffffff81631723>] ? _raw_spin_unlock_irqrestore+0x43/0x70 [<ffffffff8136fe3b>] byt_pinctrl_probe+0x2fb/0x620 [<ffffffff8142fb0c>] platform_drv_probe+0x3c/0xa0 ... Based on the diff it looks like the problem was introduced in commit 71e6ca61 ("pinctrl: baytrail: Register pin control handling") but I wasn't able to verify that empirically as the parent commit just oopsed when I tried to boot it. Cc: Cristina Ciocan <cristina.ciocan@intel.com> Cc: stable@vger.kernel.org Fixes: 71e6ca61 ("pinctrl: baytrail: Register pin control handling") Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Acked-by: NMika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Andrew Jeffery 提交于
The SPI1 function was associated with the wrong pins: The functions that those pins provide is either an SPI debug or passthrough function coupled to SPI1. Make the SPI1 mux function configure the relevant pins and associate new SPI1DEBUG and SPI1PASSTHRU functions with the pins that were already defined. The notation used in the datasheet's multi-function pin table for the SoC is often creative: in this case the SYS* signals are enabled by a single bit, which is nothing unusual on its own, but in this case the bit was also participating in a multi-bit bitfield and therefore represented multiple functions. This fact was overlooked in the original patch. Fixes: 56e57cb6 (pinctrl: Add pinctrl-aspeed-g5 driver) Signed-off-by: NAndrew Jeffery <andrew@aj.id.au> Reviewed-by: NJoel Stanley <joel@jms.id.au> Acked-by: NRob Herring <robh@kernel.org> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Andrew Jeffery 提交于
This prevented C20 from successfully being muxed as GPIO. Fixes: 56e57cb6 (pinctrl: Add pinctrl-aspeed-g5 driver) Signed-off-by: NAndrew Jeffery <andrew@aj.id.au> Reviewed-by: NJoel Stanley <joel@jms.id.au> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Andrew Jeffery 提交于
Fixes simple typos in the initial commit. There is no behavioural change. Fixes: 56e57cb6 (pinctrl: Add pinctrl-aspeed-g5 driver) Reported-by: NXo Wang <xow@google.com> Signed-off-by: NAndrew Jeffery <andrew@aj.id.au> Reviewed-by: NJoel Stanley <joel@jms.id.au> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Andrew Jeffery 提交于
Consider a scenario with one pin P that has two signals A and B, where A is defined to be higher priority than B: That is, if the mux IP is in a state that would consider both A and B to be active on P, then A will be the active signal. To instead configure B as the active signal we must configure the mux so that A is inactive. The mux state for signals can be described by logical operations on one or more bits from one or more registers (a "signal expression"), which in some cases leads to aliased mux states for a particular signal. Further, signals described by multi-bit bitfields often do not only need to record the states that would make them active (the "enable" expressions), but also the states that makes them inactive (the "disable" expressions). All of this combined leads to four possible states for a signal: 1. A signal is active with respect to an "enable" expression 2. A signal is not active with respect to an "enable" expression 3. A signal is inactive with respect to a "disable" expression 4. A signal is not inactive with respect to a "disable" expression In the case of P, if we are looking to activate B without explicitly having configured A it's enough to consider A inactive if all of A's "enable" signal expressions evaluate to "not active". If any evaluate to "active" then the corresponding "disable" states must be applied so it becomes inactive. For example, on the AST2400 the pins composing GPIO bank H provide signals ROMD8 through ROMD15 (high priority) and those for UART6 (low priority). The mux states for ROMD8 through ROMD15 are aliased, i.e. there are two mux states that result in the respective signals being configured: A. SCU90[6]=1 B. Strap[4,1:0]=100 Further, the second mux state is a 3-bit bitfield that explicitly defines the enabled state but the disabled state is implicit, i.e. if Strap[4,1:0] is not exactly "100" then ROMD8 through ROMD15 are not considered active. This requires the mux function evaluation logic to use approach 2. above, however the existing code was using approach 3. The problem was brought to light on the Palmetto machines where the strap register value is 0x120ce416, and prevented GPIO requests in bank H from succeeding despite the hardware being in a position to allow them. Fixes: 318398c09a8d ("pinctrl: Add core pinctrl support for Aspeed SoCs") Signed-off-by: NAndrew Jeffery <andrew@aj.id.au> Reviewed-by: NJoel Stanley <joel@jms.id.au> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Peter Zijlstra 提交于
I overlooked a few code-paths that can lead to locks_delete_global_locks(). Reported-by: NDmitry Vyukov <dvyukov@google.com> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: NJeff Layton <jlayton@poochiereds.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Bruce Fields <bfields@fieldses.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-fsdevel@vger.kernel.org Cc: syzkaller <syzkaller@googlegroups.com> Link: http://lkml.kernel.org/r/20161008081228.GF3142@twins.programming.kicks-ass.netSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Josh Poimboeuf 提交于
Arnd reported the following objtool warning: kernel/locking/rwsem.o: warning: objtool: down_write_killable()+0x16: call without frame pointer save/setup The warning means gcc placed the ____down_write() inline asm (and its call instruction) before the frame pointer setup in down_write_killable(), which breaks frame pointer convention and can result in incorrect stack traces. Force the stack frame to be created before the call instruction by listing the stack pointer as an output operand in the inline asm statement. Reported-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1188b7015f04baf361e59de499ee2d7272c59dce.1476393828.git.jpoimboe@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Junjie Mao 提交于
Fixes: 4246a0b6 ("block: add a bi_error field to struct bio") Signed-off-by: NJunjie Mao <junjie.mao@enight.me> Acked-by: NDavid Sterba <dsterba@suse.cz> Cc: stable@vger.kernel.org # 4.3+ Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dave Hansen 提交于
pkey_set() and pkey_get() were syscalls present in older versions of the protection keys patches. The syscall number definitions were inadvertently left in place. This patch removes them. I did a git grep and verified that these are the last places in the tree that these appear, save for the protection_keys.c tests and Documentation. Those spots talk about functions called pkey_get/set() which are wrappers for the direct PKRU instructions, not the syscalls. Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: mgorman@techsingularity.net Cc: arnd@arndb.de Cc: linux-api@vger.kernel.org Cc: linux-mm@kvack.org Cc: luto@kernel.org Cc: akpm@linux-foundation.org Fixes: f9afc619 ("x86: Wire up protection keys system calls") Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dave Hansen 提交于
pkey_set() and pkey_get() were syscalls present in older versions of the protection keys patches. They were fully excised from the x86 code, but some cruft was left in the generic syscall code. The C++ comments were intended to help to make it more glaring to me to fix them before actually submitting them. That technique worked, but later than I would have liked. I test-compiled this for arm64. Fixes: a60f7b69 ("generic syscalls: Wire up memory protection keys syscalls") Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86@kernel.org Cc: linux-arch@vger.kernel.org Cc: mgorman@techsingularity.net Cc: linux-api@vger.kernel.org Cc: linux-mm@kvack.org Cc: luto@kernel.org Cc: akpm@linux-foundation.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 17 10月, 2016 2 次提交
-
-
由 Ingo Molnar 提交于
Merge tag 'perf-urgent-for-mingo-20161017' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: - Fix handling of NUMA nodes in perf.data files (Jiri Olsa) - Fix scrolling when refreshing 'perf top --tui --hierarchy' entries (Namhyung Kim) - Fix building of JIT support on Ubuntu 16.04 (Anton Blanchard) - Fix handling of events including .c and .o, that were being treated as BPF scripts instead of vendor ones (Wang Nan) Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Anton Blanchard 提交于
When building on Ubuntu 16.04, I get the following error: Makefile:49: *** the openjdk development package appears to me missing, install and try again. Stop. The problem is that update-java-alternatives has multiple spaces between fields, and cut treats each space as a new delimiter: java-1.8.0-openjdk-ppc64el 1081 /usr/lib/jvm/java-1.8.0-openjdk-ppc64el Fix this by using awk, which handles this fine. Signed-off-by: NAnton Blanchard <anton@samba.org> Reviewed-by: NStephane Eranian <eranian@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1476325243-15788-1-git-send-email-anton@ozlabs.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-