- 19 10月, 2013 2 次提交
-
-
由 Pratik Pujar 提交于
o Updated ethtool -d <ethX> option to display ring indices for Transmit(Tx), Receive(Rx), and Status(St) rings. o Updated ethtool -d <ethX> option to display ring interrupt mask for Transmit(Tx), and Status(St) rings. Signed-off-by: NPratik Pujar <pratik.pujar@qlogic.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sucheta Chakraborty 提交于
Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 9月, 2013 3 次提交
-
-
由 Sony Chacko 提交于
There is an embedded switch per physical port on the adapter. Add support for enabling and disabling the embedded switch on per port basis. Signed-off-by: NSony Chacko <sony.chacko@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pratik Pujar 提交于
Signed-off-by: NPratik Pujar <pratik.pujar@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Manish Chopra 提交于
o Remove inline keyword from function prototypes wherever it is not appropriate. Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 8月, 2013 3 次提交
-
-
由 Sucheta Chakraborty 提交于
o Adapter sends Asynchronous Event Notifications to the driver when there are changes in the switch or adapter DCBX configuration. AEN handler updates the driver DCBX parameters. Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sucheta Chakraborty 提交于
o Populate driver data structures with local, operational, and peer DCB parameters. Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sucheta Chakraborty 提交于
o Query adapter DCB capabilities and populate local data structures with relevant information. o Add QLCNIC_DCB to Kconfig for enabling/disabling DCB. Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 8月, 2013 3 次提交
-
-
由 Shahed Shaikh 提交于
Each function driver instance uses the MAC address of the lowest function belonging to that physical port as a unique port identifier. This port identifier is read and cached in driver during probe and provided to user space through ndo_get_phys_port_id() Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Himanshu Madhani 提交于
o using ethtool {set|get}_channel option, user can change number of Tx queues for 82xx Series adapter. o updated ethtool -S <ethX> option to display stats from each Tx queue. Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Himanshu Madhani 提交于
o 82xx firmware allows support for multiple Tx queues. This patch will enable multi Tx queue support for 82xx series adapter. Max number of Tx queues supported will be 8. Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 8月, 2013 2 次提交
-
-
由 Masanari Iida 提交于
Correct spelling typo in printk Signed-off-by: NMasanari Iida <standby24x7@gmail.com> Acked-by: NRandy Dunlap <rdunlap@infradead.org> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Manish Chopra 提交于
o Loopback initiator function drivers should process loopback time extend AEN. These AENs are triggered by the loopback time extend mailbox command issued by the target function drivers. Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 8月, 2013 3 次提交
-
-
由 Manish Chopra 提交于
Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Manish Chopra 提交于
o Driver was hitting a panic at the time of adapter reset due to invalid command access from the list which had been already freed by the queuing thread. Flush all the pending commands from the list before proceeding with adapter reset Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Manish Chopra 提交于
o Do not allow interrupt test when adapter is resetting. Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 8月, 2013 2 次提交
-
-
由 Himanshu Madhani 提交于
Flash update routine was improperly checking register read API return value. Modify register read API and perform proper error check. Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rajesh Borundia 提交于
o Set link speed and duplex to unknown when link is not up. Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 8月, 2013 4 次提交
-
-
由 Manish Chopra 提交于
Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Manish Chopra 提交于
Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Manish Chopra 提交于
o Driver firmware mailbox interface was operating in polling mode because of limitations with the earlier versions of 83xx adapter firmware. These issues are resolved and we are implementing interrupt based mailbox mechanism. o Data structures and API's for interrupt mode mailbox mechanism. Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jitendra Kalsaria 提交于
o Enhanced the driver to use standard Linux error codes o Return a unique error code to indicate loopback is in progress Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 7月, 2013 1 次提交
-
-
由 Himanshu Madhani 提交于
o Commit b938662d ("qlcnic: Fix ethtool supported port status for 83xx") introduced regression for display of link status for 83xx adapter while refactoring port status display. This patch is to fix the link status display for 83xx adapter. Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 6月, 2013 5 次提交
-
-
由 Rajesh Borundia 提交于
o Implement shutdown and resume handlers for 83xx. o Refactor 82xx shutdown and resume handlers. Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pratik Pujar 提交于
Issue 'set driver version' during driver load and after reset recovery to notify the driver version to the firmware. Signed-off-by: NPratik Pujar <pratik.pujar@qlogic.com> Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jitendra Kalsaria 提交于
o Minimize sleep duration and check for adapter status. o Exit from loopback test if adapter reset is detected. Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jitendra Kalsaria 提交于
Add support for configuring secondary unicast address which will use existing HW filters to store all the unicast MAC addresses and prevent device going into promiscuous mode. Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shahed Shaikh 提交于
qlcnic_alloc_mbx_args() may fail due to failure in memory allocation. This patch checks for failure of qlcnic_alloc_mbx_args() to avoid potential invalid memory access. Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 5月, 2013 4 次提交
-
-
由 Manish Chopra 提交于
Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sony Chacko 提交于
Test and set diagnostics mode bit before starting diagnostics tests. Stop diagnostics tests if adapter is resetting. Signed-off-by: NSony Chacko <sony.chacko@qlogic.com> Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Himanshu Madhani 提交于
o Updated IRQ name for 8200 and 8300 Series adapter as per format used by other multiqueue drivers. Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Himanshu Madhani 提交于
o Set HW mask for 8300 Series adapter, in INT-x mode, to stop generating interrupt during driver unload. Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 5月, 2013 3 次提交
-
-
由 Rajesh Borundia 提交于
o Fix mailbox response poll time to maximum 5 seconds which includes mailbox response time as well as time required for processing AEN if any. o Driver need to read firmware control mailbox register instead of host control mailbox register. Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Manish Chopra 提交于
o In order to perform reset recovery during diagnostics tests, current device status information need to be preserved. This patch makes the required changes in diagnostics routines Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Himanshu Madhani 提交于
o Fix display for interface while using 'ethtool <device>' for 83xx adapter Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 4月, 2013 2 次提交
-
-
由 Himanshu Madhani 提交于
Enable Interrupt coalescing through ethtool on 83xx adapter. Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shahed Shaikh 提交于
o Read eSwitch statistics from adapter and display them as part of ethtool statistics. Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 4月, 2013 3 次提交
-
-
由 Rajesh Borundia 提交于
o When mailbox interrupt is disabled PF should be able to process request from VF. Enable polling for such cases. Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rajesh Borundia 提交于
o Do not disable mailbox interrupts while running loopback test through SR-IOV PF. Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rajesh Borundia 提交于
o Add support for VLAN id configuration per VF using iproute2 tool. o VLAN id's 1-4094 are treated as PVID by the PF and Guest VLAN tagging is not allowed by default. o PVID is disabled when the VLAN id is set to 0 o Guest VLAN tagging is allowed when the VLAN id is set to 4095. o Only one Guest VLAN id is supported. o VLAN id can be changed only when the VF driver is not loaded. Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-