- 07 5月, 2016 10 次提交
-
-
由 Alexei Starovoitov 提交于
add few tests for "pointer to packet" logic of the verifier Signed-off-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexei Starovoitov 提交于
parse_simple.c - packet parser exapmle with single length check that filters out udp packets for port 9 parse_varlen.c - variable length parser that understand multiple vlan headers, ipip, ipip6 and ip options to filter out udp or tcp packets on port 9. The packet is parsed layer by layer with multitple length checks. parse_ldabs.c - classic style of packet parsing using LD_ABS instruction. Same functionality as parse_simple. simple = 24.1Mpps per core varlen = 22.7Mpps ldabs = 21.4Mpps Parser with LD_ABS instructions is slower than full direct access parser which does more packet accesses and checks. These examples demonstrate the choice bpf program authors can make between flexibility of the parser vs speed. Signed-off-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexei Starovoitov 提交于
explain how verifier checks safety of packet access and update email addresses. Signed-off-by: NAlexei Starovoitov <ast@kernel.org> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexei Starovoitov 提交于
allow cls_bpf and act_bpf programs access skb->data and skb->data_end pointers. The bpf helpers that change skb->data need to update data_end pointer as well. The verifier checks that programs always reload data, data_end pointers after calls to such bpf helpers. We cannot add 'data_end' pointer to struct qdisc_skb_cb directly, since it's embedded as-is by infiniband ipoib, so wrapper struct is needed. Signed-off-by: NAlexei Starovoitov <ast@kernel.org> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexei Starovoitov 提交于
since UNKNOWN_VALUE type is weaker than CONST_IMM we can un-teach verifier its recognition of constants in conditional branches without affecting safety. Ex: if (reg == 123) { .. here verifier was marking reg->type as CONST_IMM instead keep reg as UNKNOWN_VALUE } Two verifier states with UNKNOWN_VALUE are equivalent, whereas CONST_IMM_X != CONST_IMM_Y, since CONST_IMM is used for stack range verification and other cases. So help search pruning by marking registers as UNKNOWN_VALUE where possible instead of CONST_IMM. Signed-off-by: NAlexei Starovoitov <ast@kernel.org> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexei Starovoitov 提交于
Extended BPF carried over two instructions from classic to access packet data: LD_ABS and LD_IND. They're highly optimized in JITs, but due to their design they have to do length check for every access. When BPF is processing 20M packets per second single LD_ABS after JIT is consuming 3% cpu. Hence the need to optimize it further by amortizing the cost of 'off < skb_headlen' over multiple packet accesses. One option is to introduce two new eBPF instructions LD_ABS_DW and LD_IND_DW with similar usage as skb_header_pointer(). The kernel part for interpreter and x64 JIT was implemented in [1], but such new insns behave like old ld_abs and abort the program with 'return 0' if access is beyond linear data. Such hidden control flow is hard to workaround plus changing JITs and rolling out new llvm is incovenient. Therefore allow cls_bpf/act_bpf program access skb->data directly: int bpf_prog(struct __sk_buff *skb) { struct iphdr *ip; if (skb->data + sizeof(struct iphdr) + ETH_HLEN > skb->data_end) /* packet too small */ return 0; ip = skb->data + ETH_HLEN; /* access IP header fields with direct loads */ if (ip->version != 4 || ip->saddr == 0x7f000001) return 1; [...] } This solution avoids introduction of new instructions. llvm stays the same and all JITs stay the same, but verifier has to work extra hard to prove safety of the above program. For XDP the direct store instructions can be allowed as well. The skb->data is NET_IP_ALIGNED, so for common cases the verifier can check the alignment. The complex packet parsers where packet pointer is adjusted incrementally cannot be tracked for alignment, so allow byte access in such cases and misaligned access on architectures that define efficient_unaligned_access [1] https://git.kernel.org/cgit/linux/kernel/git/ast/bpf.git/?h=ld_abs_dwSigned-off-by: NAlexei Starovoitov <ast@kernel.org> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexei Starovoitov 提交于
cleanup verifier code and prepare it for addition of "pointer to packet" logic Signed-off-by: NAlexei Starovoitov <ast@kernel.org> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue由 David S. Miller 提交于
Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2016-05-05 This series contains updates to i40e and i40evf. The theme behind this series is code reduction, yeah! Jesse provides most of the changes starting with a refactor of the interpretation of a tunnel which lets us start using the hardware's parsing. Removed the packet split receive routine and ancillary code in preparation for the Rx-refactor. The refactor of the receive routine, aligns the receive routine with the one in ixgbe which was highly optimized. The hardware supports a 16 byte descriptor for receive, but the driver was never using it in production. There was no performance benefit to the real driver of 16 byte descriptors, so drop a whole lot of complexity while getting rid of the code. Fixed a bug where while changing the number of descriptors using ethtool, the driver did not test the limits of the system memory before permanently assuming it would be able to get receive buffer memory. Mitch fixes a memory leak of one page each time the driver is opened by allocating the correct number of receive buffers and do not fiddle with next_to_use in the VF driver. Arnd Bergmann fixed a indentation issue by adding the appropriate curly braces in i40e_vc_config_promiscuous_mode_msg(). Julia Lawall fixed an issue found by Coccinelle, where i40e_client_ops structure can be const since it is never modified. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
Tables have to exist for VRFs to function. Ensure they exist when VRF device is created. Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Maxwell 提交于
We recently had a system crash in the cnic module. Vmcore analysis confirmed that "ip link up" was executed which failed due to an allocation failure because of memory fragmentation. Futher analysis revealed that the cnic irq vector was still allocated after the "ip link up" that failed. When "ip link down" was executed it called free_msi_irqs() which crashed the system because the cnic irq was still inuse. PANIC: "kernel BUG at drivers/pci/msi.c:411!" The code execution was: cnic_netdev_event() if (event == NETDEV_UP) { . . ▹ if (!cnic_start_hw(dev)) cnic_start_hw() calls cnic_cm_open() which failed with -ENOMEM cnic_start_hw() then took the err1 path: err1:
↩ cp->free_resc(dev);↩ <---- frees resources but not irq vector pci_dev_put(dev->pcidev);↩ return err;↩ }↩ This returns control back to cnic_netdev_event() but now the cnic irq vector is still allocated even although cnic_cm_open() failed. The next "ip link down" while trigger the crash. The cnic_start_hw() routine is not handling the allocation failure correctly. Fix this by checking whether CNIC_DRV_STATE_HANDLES_IRQ flag is set indicating that the hardware has been started in cnic_start_hw(). If it has then call cp->stop_hw() which frees the cnic irq vector and cnic resources. Otherwise just maintain the previous behaviour and free cnic resources. I reproduced this by injecting an ENOMEM error into cnic_cm_alloc_mem()s return code. # ip link set dev enpX down # ip link set dev enpX up <--- hit's allocation failure # ip link set dev enpX down <--- crashes here With this patch I confirmed there was no crash in the reproducer. Signed-off-by: NJon Maxwell <jmaxwell37@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 5月, 2016 12 次提交
-
-
由 Julia Lawall 提交于
The i40e_client_ops structure is never modified, so declare it as const. Done with the help of Coccinelle. Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Reviewed-by: NLeon Romanovsky <leonro@mellanox.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Arnd Bergmann 提交于
Newly added code in i40e_vc_config_promiscuous_mode_msg() is indented in a way that gcc rightly complains about: drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c: In function 'i40e_vc_config_promiscuous_mode_msg': drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:1543:4: error: this 'if' clause does not guard... [-Werror=misleading-indentation] if (f->vlan >= 0 && f->vlan <= I40E_MAX_VLANID) ^~ drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:1550:5: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the 'if' aq_err = pf->hw.aq.asq_last_status; From the context, it looks like the aq_err assignment was meant to be inside of the conditional expression, so I'm adding the appropriate curly braces now. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Fixes: 5676a8b9 ("i40e: Add VF promiscuous mode driver support") Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jesse Brandeburg 提交于
When testing on systems with very limited amounts of RAM, a bug was found where, while changing the number of descriptors using ethtool, the driver didn't test the limits of system memory before permanently assuming it would be able to get receive buffer memory. Work around this issue by pre-allocation of the receive buffer memory, in the "ghost" ring, which is then used during reinit using the new ring length. Change-Id: I92d7a5fb59a6c884b2efdd1ec652845f101c3359 Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mitch Williams 提交于
Allocate the correct number of RX buffers, and don't fiddle with next_to_use. The common RX code handles all of this. This fixes a memory leak of one page each time the driver is opened. Change-Id: Id06eca353086e084921f047acad28c14745684ee Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jesse Brandeburg 提交于
The hardware supports a 16 byte descriptor for receive, but the driver was never using it in production. There was no performance benefit to the real driver of 16 byte descriptors, so drop a whole lot of complexity while getting rid of the code. Also since the previous patch made us use no-split mode all the time, drop any support in the driver for any other value in dtype and assume it is always zero (aka no-split). Hooray for code removal! Change-ID: I2257e902e4dad84a07b94db6d2e6f4ce69b27bc0 Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jesse Brandeburg 提交于
This is part 2 of the Rx refactor series, just including changes to i40evf. This refactor aligns the receive routine with the one in ixgbe which was highly optimized. This reduces the code we have to maintain and allows for (hopefully) more readable and maintainable RX hot path. In order to do this: - consolidate the receive path into a single function that doesn't use packet split but *does* use pages for Rx buffers. - remove the old _1buf routine - consolidate several routines into helper functions - remove VF ethtool control over packet split - remove priv_flags interface since it is unused Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jesse Brandeburg 提交于
As part of preparation for the rx-refactor, remove the packet split receive routine and ancillary code. Some of the split related context set up code stays in i40e_virtchnl_pf.c in case an older VF driver tries to load and still wants to use packet split. Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jesse Brandeburg 提交于
This is part 1 of the Rx refactor series, just including changes to i40e. This refactor aligns the receive routine with the one in ixgbe which was highly optimized. This reduces the code we have to maintain and allows for (hopefully) more readable and maintainable RX hot path. In order to do this: - consolidate the receive path into a single function that doesn't use packet split but *does* use pages for Rx buffers. - remove the old _1buf routine - consolidate several routines into helper functions - remove ethtool control over packet split Change-ID: I5ca100721de65992aa0114f8b4bac844b84758e0 Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Haggai Abramovsky 提交于
The dma_alloc_coherent() function returns a virtual address which can be used for coherent access to the underlying memory. On some architectures, like arm64, undefined behavior results if this memory is also accessed via virtual mappings that are not coherent. Because of their undefined nature, operations like virt_to_page() return garbage when passed virtual addresses obtained from dma_alloc_coherent(). Any subsequent mappings via vmap() of the garbage page values are unusable and result in bad things like bus errors (synchronous aborts in ARM64 speak). The mlx4 driver contains code that does the equivalent of: vmap(virt_to_page(dma_alloc_coherent)), this results in an OOPs when the device is opened. Prevent Ethernet driver to run this problematic code by forcing it to allocate contiguous memory. As for the Infiniband driver, at first we are trying to allocate contiguous memory, but in case of failure roll back to work with fragmented memory. Signed-off-by: NHaggai Abramovsky <hagaya@mellanox.com> Signed-off-by: NYishai Hadas <yishaih@mellanox.com> Reported-by: NDavid Daney <david.daney@cavium.com> Tested-by: NSinan Kaya <okaya@codeaurora.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jesse Brandeburg 提交于
As part of the rx-refactor, the dtype variable in the i40e_ring struct is no longer used, so remove it. Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jesse Brandeburg 提交于
As part of preparation for the rx-refactor, remove the packet split receive routine and ancillary code. Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jesse Brandeburg 提交于
Refactor the interpretation of a tunnel. This removes some code and lets us start using the hardware's parsing. Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 05 5月, 2016 18 次提交
-
-
由 Jeff Kirsher 提交于
With the recent "retirements" and other changes, make the maintainers list a lot less confusing and a bit more straight forward. Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: NShannon Nelson <sln@onemain.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
percpu_counter only have protection against preemption. TCP stack uses them possibly from BH, so we need BH protection in contexts that could be run in process context Fixes: c10d9310 ("tcp: do not assume TCP code is non preemptible") Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue由 David S. Miller 提交于
Jeff Kirsher says: ==================== 10GbE Intel Wired LAN Driver Updates 2016-05-04 This series contains updates to ixgbe, ixgbevf and traffic class helpers. Sridhar adds helper functions to the tc_mirred header to access tcf_mirred information and then implements them for ixgbe to enable redirection to a SRIOV VF or an offloaded MACVLAN device queue via tc 'mirred' action. Amritha adds support to set filters with multiple header fields (L3,L4) to match on. KY Srinivasan from Microsoft add Hyper-V support into ixgbevf. Emil adds 82599 sub-device IDs that were missing from the list of parts that support WoL. Then simplified the logic we use to determine WoL support by reading the EEPROM bits for MACs X540 and newer. Preethi cleaned up duplicate and unused device IDs. Fixed our ethtool stat reporting where we were ignoring higher 32 bits of stats registers, so fill out 64 bit stat values into two 32 bit words. Babu Moger from Oracle improves VF performance issues on SPARC. Alex Duyck cleans up some of the Hyper-V implementation from KY so that we can just use function pointers instead of having to identify if a given VF is running on a Linux or Windows PF. Usha makes sure that DCB and FCoE is disabled for X550EM_x/a MACs and cleans up the DCB initialization in the process. Tony cleans up the API for ixgbevf_update_xcast_mode() so we do not have to pass in the netdev parameter, since it was never used in the function. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Westphal 提交于
kbuild test robot reported a build failure on s390. While at it, also fix missing conversion in the tilera driver. Fixes: 9b36627a ("net: remove dev->trans_start") Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Westphal 提交于
Drivers that use LLTX need to update trans_start of the netdev_queue. (Most drivers don't use LLTX; stack does this update if .ndo_start_xmit returned TX_OK). Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
If the call to fn() fails then "buf" is uninitialized. Just return the error code in that case. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
If the fn() calls fail then "buf" is uninitialized. Just return early in that situation. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
__inet_twsk_hashdance() might be called from process context, better block BH before acquiring bind hash and established locks Fixes: c10d9310 ("tcp: do not assume TCP code is non preemptible") Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
tcp_snd_una_update() and tcp_rcv_nxt_update() call u64_stats_update_begin() either from process context or BH handler. This triggers a lockdep splat on 32bit & SMP builds. We could add u64_stats_update_begin_bh() variant but this would slow down 32bit builds with useless local_disable_bh() and local_enable_bh() pairs, since we own the socket lock at this point. I add sock_owned_by_me() helper to have proper lockdep support even on 64bit builds, and new u64_stats_update_begin_raw() and u64_stats_update_end_raw methods. Fixes: c10d9310 ("tcp: do not assume TCP code is non preemptible") Reported-by: NFabio Estevam <festevam@gmail.com> Diagnosed-by: NFrancois Romieu <romieu@fr.zoreil.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Tested-by: NFabio Estevam <fabio.estevam@nxp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.open-mesh.org/linux-merge由 David S. Miller 提交于
Antonio Quartulli says: ==================== pull request: batman-adv 20160504 In this pull request you have: - two changes to the MAINTAINERS file where one marks our mailing list as moderated and the other adds a missing documentation file - kernel-doc fixes - code refactoring and various cleanups ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sergei Shtylyov 提交于
I've finally noticed that mdiobus_scan() also returns either NULL or error value on failure. Return ERR_PTR(-ENODEV) instead of NULL since this is the error value already filtered out by the callers that want to ignore the MDIO address scan failure... Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Florian Westphal says: ==================== net: remove trans_start from struct net_device We currently have two instances for trans_start, once in net_device and once in netdev_queue. This series removes trans_start from net_device. Updates to dev->trans_start are replaced with updates to netdev queue 0. This series is compile-tested only. Replacement is done in 3 steps: 1. Replace read-accesses: x = dev->trans_start gets replaced by x = dev_trans_start(dev) 2. Replace write accesses: dev->trans_start = jiffies; gets replaced with new helper: netif_trans_update(dev); 3. This helper is then changed to set netdev_get_tx_queue(dev, 0)->trans_start instead of dev->trans_start. After this dev->trans_start can be removed. It should be noted that after this series several instances of netif_trans_update() are useless (if they occur in .ndo_start_xmit and driver doesn't set LLTX flag -- stack already did an update). Comments welcome. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Westphal 提交于
previous patches removed all direct accesses to dev->trans_start, so change the netif_trans_update helper to update trans_start of netdev queue 0 instead and then remove trans_start from struct net_device. AFAICS a lot of the netif_trans_update() invocations are now useless because they occur in ndo_start_xmit and driver doesn't set LLTX (i.e. stack already took care of the update). As I can't test any of them it seems better to just leave them alone. Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Westphal 提交于
Replace all trans_start updates with netif_trans_update helper. change was done via spatch: struct net_device *d; @@ - d->trans_start = jiffies + netif_trans_update(d) Compile tested only. Cc: user-mode-linux-devel@lists.sourceforge.net Cc: linux-xtensa@linux-xtensa.org Cc: linux1394-devel@lists.sourceforge.net Cc: linux-rdma@vger.kernel.org Cc: netdev@vger.kernel.org Cc: MPT-FusionLinux.pdl@broadcom.com Cc: linux-scsi@vger.kernel.org Cc: linux-can@vger.kernel.org Cc: linux-parisc@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-hams@vger.kernel.org Cc: linux-usb@vger.kernel.org Cc: linux-wireless@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: devel@driverdev.osuosl.org Cc: b.a.t.m.a.n@lists.open-mesh.org Cc: linux-bluetooth@vger.kernel.org Signed-off-by: NFlorian Westphal <fw@strlen.de> Acked-by: NFelipe Balbi <felipe.balbi@linux.intel.com> Acked-by: NMugunthan V N <mugunthanvnm@ti.com> Acked-by: NAntonio Quartulli <a@unstable.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Westphal 提交于
trans_start exists twice: - as member of net_device (legacy) - as member of netdev_queue In order to get rid of the legacy case, add a helper for the dev->trans_update (this patch), then convert spots that do dev->trans_start = jiffies to use this helper (next patch). This would then allow us to change the helper so that it updates the trans_stamp of netdev queue 0 instead. Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Westphal 提交于
a trans_start struct member exists twice: - in struct net_device (legacy) - in struct netdev_queue Instead of open-coding dev->trans_start usage to obtain the current trans_start value, use dev_trans_start() instead. This is not exactly the same, as dev_trans_start also considers the trans_start values of the netdev queues owned by the device and provides the most recent one. For legacy devices this doesn't matter as dev_trans_start can cope with netdev trans_start values of 0 (they are ignored). This is a prerequisite to eventual removal of dev->trans_start. Cc: linux-rdma@vger.kernel.org Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Westphal 提交于
use net_device directly. Compile tested, objdiff shows no changes. Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnd Bergmann 提交于
The ipv6 gre implementation was cleaned up to share more code with the ipv4 version, but it can be enabled even when NET_IPGRE_DEMUX is disabled, resulting in a link error: net/built-in.o: In function `gre_rcv': :(.text+0x17f5d0): undefined reference to `gre_parse_header' ERROR: "gre_parse_header" [net/ipv6/ip6_gre.ko] undefined! This adds a Kconfig dependency to prevent that now invalid configuration. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Fixes: 308edfdf ("gre6: Cleanup GREv6 receive path, call common GRE functions") Acked-by: NTom Herbert <tom@herbertland.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-