1. 10 5月, 2007 8 次提交
    • B
      ide: add "initializing" argument to ide_register_hw() · 869c56ee
      Bartlomiej Zolnierkiewicz 提交于
      Add "initializing" argument to ide_register_hw() and use it instead of ide.c
      wide variable of the same name.  Update all users of ide_register_hw()
      accordingly.
      Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      869c56ee
    • B
      ide: cable detection fixes (take 2) · 7f8f48af
      Bartlomiej Zolnierkiewicz 提交于
      Tejun's recent eighty_ninty_three() fix has inspired me to do more thorough
      review of the cable detection code...
      
      * print user-friendly warning about limiting the maximum transfer speed
        to UDMA33 (and the reason behind it) when 80-wire cable is not detected,
        also while at it cleanup eighty_ninty_three() a bit
      
      * use eighty_ninty_three() in ide_ata66_check(), this actually fixes 3 bugs:
        - bit 14 (word 93 validity check) == 1 && bit 13 (80-wire cable test) == 1
          were used as 80-wire cable present test for CONFIG_IDEDMA_IVB=n case
          (please see FIXME comment in eighty_ninty_three() for more details)
        - CONFIG_IDEDMA_IVB=y/n cases were interchanged
        - check for SATA devices was missing
      
      * remove private cable warnings from pdc_202xx{old,new} drivers now that core
        code provides this functionality (plus, in pdc202xx_new case the test could
        give false warnings for ATAPI devices because pdc202xx_new driver doesn't
        even support ATAPI DMA)
      
      Cc: Tejun Heo <htejun@gmail.com>
      Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      7f8f48af
    • B
      ide: move IDE settings handling to ide-proc.c · 7662d046
      Bartlomiej Zolnierkiewicz 提交于
      * move
      	__ide_add_setting()
      	ide_add_setting()
      	__ide_remove_setting()
      	auto_remove_settings()
      	ide_find_setting_by_name()
      	ide_read_setting()
      	ide_write_setting()
      	set_xfer_rate()
      	ide_add_generic_settings()
      	ide_register_subdriver()
      	ide_unregister_subdriver()
      
        from ide.c to ide-proc.c
      
      * set_{io_32bit,pio_mode,using_dma}() cannot be marked static now, fix it
      
      * rename ide_[un]register_subdriver() to ide_proc_[un]register_driver(),
        update device drivers to use new names
      
      * add CONFIG_IDE_PROC_FS=n versions of ide_proc_[un]register_driver()
        and ide_add_generic_settings()
      
      * make ide_find_setting_by_name(), ide_{read,write}_setting()
        and ide_{add,remove}_proc_entries() static
      
      * cover IDE settings code in device drivers with CONFIG_IDE_PROC_FS #ifdef,
        also while at it cover with CONFIG_IDE_PROC_FS #ifdef ide_driver_t.proc
      
      * remove bogus comment from ide.h
      
      * cover with CONFIG_IDE_PROC_FS #ifdef .proc and .settings in ide_drive_t
      
      Besides saner code this patch results in the IDE core smaller by ~2 kB
      (on x86-32) and IDE disk driver by ~1 kB (ditto) when CONFIG_IDE_PROC_FS=n.
      Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      7662d046
    • B
      ide: split off ioctl handling from IDE settings (v2) · 1497943e
      Bartlomiej Zolnierkiewicz 提交于
      * do write permission and min/max checks in ide_procset_t functions
      
      * ide-disk.c: drive->id is always available so cleanup "multcount" setting
        accordingly
      
      * ide-disk.c: "address" setting was incorrectly defined as type TYPE_INTA,
        fix it by using type TYPE_BYTE and updating ide_drive_t->adressing field,
        the bug didn't trigger because this IDE setting uses custom ->set function
      
      * ide.c: add set_ksettings() for handling HDIO_SET_KEEPSETTINGS ioctl
      
      * ide.c: add set_unmaskirq() for handling HDIO_SET_UNMASKINTR ioctl
      
      * handle ioctls directly in generic_ide_ioclt() and idedisk_ioctl()
        instead of using IDE settings to deal with them
      
      * remove no longer needed ide_find_setting_by_ioctl() and {read,write}_ioctl
        fields from ide_settings_t, also remove now unused TYPE_INTA handling
      
      v2:
      * add missing EXPORT_SYMBOL_GPL(ide_setting_sem) needed now for ide-disk
      Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      1497943e
    • B
      ide: make /proc/ide/ optional · ecfd80e4
      Bartlomiej Zolnierkiewicz 提交于
      All important information/features should be already available through
      sysfs and ioctl interfaces.
      
      Add CONFIG_IDE_PROC_FS (CONFIG_SCSI_PROC_FS rip-off) config option,
      disabling it makes IDE driver ~5 kB smaller (on x86-32).
      
      While at it add CONFIG_PROC_FS=n versions of proc_ide_{create,destroy}()
      and remove no longer needed #ifdefs.
      Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      ecfd80e4
    • B
      ide: add ide_tune_dma() helper · 29e744d0
      Bartlomiej Zolnierkiewicz 提交于
      After reworking the code responsible for selecting the best DMA
      transfer mode it is now possible to add generic ide_tune_dma() helper.
      
      Convert some IDE PCI host drivers to use it (the ones left need more work).
      Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      29e744d0
    • B
      ide: rework the code for selecting the best DMA transfer mode (v3) · 2d5eaa6d
      Bartlomiej Zolnierkiewicz 提交于
      Depends on the "ide: fix UDMA/MWDMA/SWDMA masks" patch.
      
      * add ide_hwif_t.udma_filter hook for filtering UDMA mask
        (use it in alim15x3, hpt366, siimage and serverworks drivers)
      * add ide_max_dma_mode() for finding best DMA mode for the device
        (loosely based on some older libata-core.c code)
      * convert ide_dma_speed() users to use ide_max_dma_mode()
      * make ide_rate_filter() take "ide_drive_t *drive" as an argument instead
        of "u8 mode" and teach it to how to use UDMA mask to do filtering
      * use ide_rate_filter() in hpt366 driver
      * remove no longer needed ide_dma_speed() and *_ratemask()
      * unexport eighty_ninty_three()
      
      v2:
      * rename ->filter_udma_mask to ->udma_filter
        [ Suggested by Sergei Shtylyov <sshtylyov@ru.mvista.com>. ]
      
      v3:
      * updated for scc_pata driver (fixes XFER_UDMA_6 filtering for user-space
        originated transfer mode change requests when 100MHz clock is used)
      Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      2d5eaa6d
    • B
      ide: fix UDMA/MWDMA/SWDMA masks (v3) · 18137207
      Bartlomiej Zolnierkiewicz 提交于
      * use 0x00 instead of 0x80 to disable ->{ultra,mwdma,swdma}_mask
      * add udma_mask field to ide_pci_device_t and use it to initialize
        ->ultra_mask in aec62xx, cmd64x, pdc202xx_{new,old} and piix drivers
      * fix UDMA masks to match with chipset specific *_ratemask()
        (alim15x3, hpt366, serverworks and siimage drivers need UDMA mask
         filtering method - done in the next patch)
      
      v2:
      * piix: fix cable detection for 82801AA_1 and 82372FB_1
        [ Noticed by Sergei Shtylyov <sshtylyov@ru.mvista.com>. ]
      * cmd64x: use hwif->cds->udma_mask
        [ Suggested by Sergei Shtylyov <sshtylyov@ru.mvista.com>. ]
      * aec62xx: fix newly introduced bug - check DMA status not command register
        [ Noticed by Sergei Shtylyov <sshtylyov@ru.mvista.com>. ]
      
      v3:
      * piix: use hwif->cds->udma_mask
        [ Suggested by Sergei Shtylyov <sshtylyov@ru.mvista.com>. ]
      Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      18137207
  2. 09 5月, 2007 32 次提交