- 23 7月, 2016 30 次提交
-
-
由 Mauro Carvalho Chehab 提交于
add card Hauppauge WinTV-QuadHD-DVB to the list. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
References at the rst files for C functions generated via kernel-doc should use :c:func:. Fix it. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
This struct is mentioned at the kAPI docbook. So, let's document it. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
Reorganize the order of the document, putting the chapters on a more logical order and renaming some sections. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
Now that the only remaining chapters at v4l2-framework are the introduction ones, let' s rename the file. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
Move the v4l2 clocks stuff from v4l2-framework to a separate file and adds an attention that came from the v4l2-clk.h. Note: as this is meant to be a temporary kAPI, and it is used only by two drivers (soc_camera and em28xx), where the first one is in deprecation process, it probably not a worth effort to document its header. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
Add cross-references with the kernel-doc functions/structs and improve the markups. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
Move the v4l2_fh specific content from v4l2-framework.rst to v4l2-fh.rst. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
This header file was undocumented. Add documentation for it. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
Improve events documentation by adding cross references, sub-titles and other markup elements. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
Move the v4l2 event-specific text from v4l2-framework.rst to v4l2-event.rst. That helps to keep the text together with the functions it describes, and makes easier to identify documentation gaps. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
As we merged the videobuf chapter at the kABI section, and it is a way more complete, just remove the small videobuf chapter that came from framework.txt. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
Add cross-references for the functions/structs and add the markup tags to improve its display. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
Move the documentation for video device node creation to a separate file. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
Add documentation for v4l2-dev.h, and put it at v4l2-framework.rst, where struct video_device is currently documented. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
The v4l2_subdev reference was using the wrong tag. Fix it. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
There are some subdev-specific functions at v4l2-common.h that are mentioned at v4l2-subdev.rst. Document them. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
The two new sections were missing cross-references, and had some other minor issues with the markups. Add such things. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
There are two additional subdev-specific sections at the v4l2-framework file. Move them to the subdev chapter, in order to better organize the book. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
The Async API is actually part of the v4l2 subdev. Move its declarations to it. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
Enrich the subdevice description by linking it to the functions and structs from v4l2-subdev.h. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
There are lots of documentation about V4L2 subdevices at v4l2-framework.rst. Move them to its specific chapter at v4l2-subdev.rst. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
This document describes the main kAPI interfaces for the v4l2-device.h header. Add cross references to the documentation produced via kernel-doc. While here, also use monotonic font for constants. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
Part of the contents of v4l2-framework is related to the kAPI defined by v4l2-device. Move such contents to the v4l2-device.rst. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
Sphinx produce a 1:1 mapping between a rst file and an html file. So, we need to split the kernel-doc tags on multiple documents. A side effect is that we're now having a better name for each section of the kAPI documentation. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
The functions at v4l2-device.h are not using the proper markups. Add it, and include at the v4l2-core.rst. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
The kAPI, v4l-drivers and dvb-drivers never used the GNU FDL license. The addition of such license header were just due to copy-and-paste. So, let's fix it. As the media_kapi were part of device-drivers.tmp, it is under GPL v2+. The other two books is an agregation of files without any license explicitly specified. So, they're all bound to the Kernel's COPYING license. So, they're GPL v2 only. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
The uAPI book has 5 parts, but they lost numeration after conversion to rst. Manually number those parts, and make the main index with 1 depth, to only show the parts and the annexes. At each part, use :maxwidth: 5, in order to show a more complete index. While here, fix the cross-references between different books. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
Fix all remaining media warnings with ReST that are fixable without changing at the Sphinx code. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Andreas Herrmann 提交于
This reverts commit 790d849b. Using a v4.7-rc7 kernel on a HP ProLiant triggered following messages pcc-cpufreq: (v1.10.00) driver loaded with frequency limits: 1200 MHz, 2800 MHz cpufreq: ondemand governor failed, too long transition latency of HW, fallback to performance governor The last line was shown for each CPU in the system. Testing v4.5 (where commit 790d849b was integrated) triggered similar messages. Same behaviour on a 2nd HP Proliant system. So commit 790d849b (cpufreq: pcc-cpufreq: update default value of cpuinfo_transition_latency) causes the system to use performance governor which, I guess, was not the intention of the patch. Enabling debug output in pcc-cpufreq provides following verbose output: pcc-cpufreq: (v1.10.00) driver loaded with frequency limits: 1200 MHz, 2800 MHz pcc_get_offset: for CPU 0: pcc_cpu_data input_offset: 0x44, pcc_cpu_data output_offset: 0x48 init: policy->max is 2800000, policy->min is 1200000 get: get_freq for CPU 0 get: SUCCESS: (virtual) output_offset for cpu 0 is 0xffffc9000d7c0048, contains a value of: 0xff06. Speed is: 168000 MHz cpufreq: ondemand governor failed, too long transition latency of HW, fallback to performance governor target: CPU 0 should go to target freq: 2800000 (virtual) input_offset is 0xffffc9000d7c0044 target: was SUCCESSFUL for cpu 0 I am asking to revert 790d849b to re-enable usage of ondemand governor with pcc-cpufreq. Fixes: 790d849b (cpufreq: pcc-cpufreq: update default value of cpuinfo_transition_latency) CC: <stable@vger.kernel.org> # 4.5+ Signed-off-by: NAndreas Herrmann <aherrmann@suse.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 22 7月, 2016 1 次提交
-
-
由 hotran 提交于
This patch adds the APM X-Gene hwmon device tree node documentation. Signed-off-by: NHoan Tran <hotran@apm.com> Acked-by: NRob Herring <robh@kernel.org> Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
-
- 21 7月, 2016 3 次提交
-
-
由 Jonathan Corbet 提交于
This reverts commit 47d6d752. Commit f42ddca7 (doc-rst: kernel-doc directive, fix state machine reporter) from Marcus Heiser provides a better fix, so this configuration change is no longer needed.
-
由 Markus Heiser 提交于
Add a reporter replacement that assigns the correct source name and line number to a system message, as recorded in a ViewList. [1] http://mid.gmane.org/CAKMK7uFMQ2wOp99t-8v06Om78mi9OvRZWuQsFJD55QA20BB3iw@mail.gmail.comSigned-off-by: NMarkus Heiser <markus.heiser@darmarIT.de> Tested-by: NMauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: NJonathan Corbet <corbet@lwn.net>
-
由 Jonathan Corbet 提交于
Now that the new Sphinx world order is taking over, the information in kernel-doc-nano-HOWTO.txt is outmoded. I hate to remove it altogether, since it's one of those files that people expect to find. But we can add a warning and fix all the other pointers to it. Reminded-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NJonathan Corbet <corbet@lwn.net>
-
- 20 7月, 2016 3 次提交
-
-
由 Thilo Cestonaro 提交于
This driver implements hardware monitoring and watchdog support for the FTS BMC Chip "Teutates". Signed-off-by: NThilo Cestonaro <thilo@cestona.ro> [groeck: Updated subject and description; fixed dependencies] Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
-
由 Daniel Vetter 提交于
Unfortunately warnings generated after parsing in sphinx can end up with entirely bogus files and line numbers as sources. Strangely for outright errors this is not a problem. Trying to convert warnings to errors also doesn't fix it. The only way to get useful output out of sphinx to be able to root cause the error seems to be enabling keep_warnings, which inserts a System Message into the actual output. Not pretty at all, but I don't really want to fix up core rst/sphinx code, and this gets the job done meanwhile. Cc: Markus Heiser <markus.heiser@darmarit.de> Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-doc@vger.kernel.org Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Signed-off-by: NJonathan Corbet <corbet@lwn.net>
-
由 Hans Verkuil 提交于
Update and expand the CEC documentation. Especially w.r.t. non-blocking mode. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
- 19 7月, 2016 3 次提交
-
-
由 Mauro Carvalho Chehab 提交于
Sphinx is really evil when an older version finds an extra attribute for the :toctree: tag: it simply ignores everything and produce documents without any chapter inside! As we're now using tags available only on Sphinx 1.4.x, we need to use some creative ways to add a title before the table of contents. Do that by using a css class. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
The titles at the media books were misleading, and some books were not numbered. Rename the kAPI book to better reflect its contents, be more consistent on the initial rst file for each book and better name them. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
I ended by adding twice each media header, because I saw some missing stuff at the documents. It seems it was my mistake, as everything seems to be there. So, remove those extra stuff, to avoid duplicating the documentation of the functions. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-