- 04 9月, 2009 8 次提交
-
-
由 Steven Rostedt 提交于
During development of the tracer, we would copy information from the live tracer to the max tracer with one memcpy. Since then we added a generic ring buffer and we handle the copies differently now. Unfortunately, we never copied the critical section information, and we lost the output: # => started at: kmem_cache_alloc # => ended at: kmem_cache_alloc This patch adds back the critical start and end copying as well as removes the unused "trace_idx" and "overrun" fields of the trace_array_cpu structure. Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
由 Steven Rostedt 提交于
Currently the way RB_WARN_ON works, is to disable either the current CPU buffer or all CPU buffers, depending on whether a ring_buffer or ring_buffer_per_cpu struct was passed into the macro. Most users of the RB_WARN_ON pass in the CPU buffer, so only the one CPU buffer gets disabled but the rest are still active. This may confuse users even though a warning is sent to the console. This patch changes the macro to disable the entire buffer even if the CPU buffer is passed in. Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
由 Steven Rostedt 提交于
The latency tracers report the number of items in the trace buffer. This uses the ring buffer data to calculate this. Because discarded events are also counted, the numbers do not match the number of items that are printed. The ring buffer also adds a "padding" item to the end of each buffer page which also gets counted as a discarded item. This patch decrements the counter to the page entries on a discard. This allows us to ignore discarded entries while reading the buffer. Decrementing the counter is still safe since it can only happen while the committing flag is still set. Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
由 Steven Rostedt 提交于
The function ring_buffer_event_discard can be used on any item in the ring buffer, even after the item was committed. This function provides no safety nets and is very race prone. An item may be safely removed from the ring buffer before it is committed with the ring_buffer_discard_commit. Since there are currently no users of this function, and because this function is racey and error prone, this patch removes it altogether. Note, removing this function also allows the counters to ignore all discarded events (patches will follow). Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
由 Steven Rostedt 提交于
When the ring buffer uses an iterator (static read mode, not on the fly reading), when it crosses a page boundery, it will skip the first entry on the next page. The reason is that the last entry of a page is usually padding if the page is not full. The padding will not be returned to the user. The problem arises on ring_buffer_read because it also increments the iterator. Because both the read and peek use the same rb_iter_peek, the rb_iter_peak will return the padding but also increment to the next item. This is because the ring_buffer_peek will not incerment it itself. The ring_buffer_read will increment it again and then call rb_iter_peek again to get the next item. But that will be the second item, not the first one on the page. The reason this never showed up before, is because the ftrace utility always calls ring_buffer_peek first and only uses ring_buffer_read to increment to the next item. The ring_buffer_peek will always keep the pointer to a valid item and not padding. This just hid the bug. Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
由 Steven Rostedt 提交于
The loops in the ring buffer that use cpu_relax are not dependent on other CPUs. They simply came across some padding in the ring buffer and are skipping over them. It is a normal loop and does not require a cpu_relax. Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
由 Steven Rostedt 提交于
If a commit is taking place on a CPU ring buffer, do not allow it to be swapped. Return -EBUSY when this is detected instead. Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
由 Steven Rostedt 提交于
The callers of reset must ensure that no commit can be taking place at the time of the reset. If it does then we may corrupt the ring buffer. Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
- 31 8月, 2009 1 次提交
-
-
由 Li Zefan 提交于
init_preds() allocates about 5392 bytes of memory (on x86_32) for a TRACE_EVENT. With my config, at system boot total memory occupied is: 5392 * (642 + 15) == 3459KB 642 == cat available_events | wc -l 15 == number of dirs in events/ftrace That's quite a lot, so we'd better defer memory allocation util it's needed, that's when filter is used. Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> LKML-Reference: <4A9B8EA5.6020700@cn.fujitsu.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 28 8月, 2009 2 次提交
-
-
由 Steven Rostedt 提交于
The tracing_max_latency file should only be present when one of the latency tracers ({preempt|irqs}off, wakeup*) are enabled. This patch also removes tracing_thresh when latency tracers are not enabled, as well as compiles out code that is only used for latency tracers. Reported-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
由 Steven Rostedt 提交于
The context switch tracer was made before tracepoints were mature, and the original version used markers. This is no longer true and this patch removes the select. Reported-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
- 27 8月, 2009 3 次提交
-
-
由 Jason Baron 提交于
Convert the syscalls event tracing code to use NR_syscalls, instead of FTRACE_SYSCALL_MAX. NR_syscalls is standard accross most arches, and reduces code confusion/complexity. Signed-off-by: NJason Baron <jbaron@redhat.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Martin Bligh <mbligh@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Josh Stone <jistone@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: H. Peter Anwin <hpa@zytor.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> LKML-Reference: <9b4f1a84ecae57cc6599412772efa36f0d2b815b.1251146513.git.jbaron@redhat.com> Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
-
由 Hendrik Brueckner 提交于
Kernel threads don't call syscalls using the sysenter/sysexit path. Instead they directly call the sys_* or do_* functions that implement the syscalls inside the kernel. The current syscall tracepoints only bind the sysenter/sysexit path, then it has no effect to trace the kernel thread calls to syscalls in that path. Setting the TIF_SYSCALL_TRACEPOINT flag is then useless for these. Actually there is only one case when a kernel thread can reach the usual syscall exit tracing path: when we create a kernel thread, the child comes to ret_from_fork and is the fork() return is then traced. But this information alone is useless, then we don't want to set the TIF flags for these threads. Kernel threads have task_struct->mm set to NULL. (Thanks to Heiko for that hint ;-) The idea is then to check the mm field in syscall_regfunc() and set the flag accordingly. Signed-off-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Martin Bligh <mbligh@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> LKML-Reference: <20090825160237.GG4639@cetus.boeblingen.de.ibm.com> Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
-
由 Hendrik Brueckner 提交于
Most arch syscall_get_nr() implementations returns -1 if the syscall number is not valid. Accessing the bit field without a check might result in a kernel oops (at least I saw it on s390 for ftrace selftest). Before this change, this problem did not occur, because the invalid syscall number (-1) caused syscall_nr_to_meta() to return NULL. There are at least two scenarios where syscall_get_nr() can return -1: 1. For example, ptrace stores an invalid syscall number, and thus, tracing code resets it. (see do_syscall_trace_enter in arch/s390/kernel/ptrace.c) 2. The syscall_regfunc() (kernel/tracepoint.c) sets the TIF_SYSCALL_FTRACE (now: TIF_SYSCALL_TRACEPOINT) flag for all threads which include kernel threads. However, the ftrace selftest triggers a kernel oops when testing syscall trace points: - The kernel thread is started as ususal (do_fork()), - tracing code sets TIF_SYSCALL_FTRACE, - the ret_from_fork() function is triggered and starts ftrace_syscall_exit() with an invalid syscall number. To avoid these scenarios, I suggest to check the syscall_nr. For instance, the ftrace selftest fails for s390 (with config option CONFIG_FTRACE_SYSCALLS set) and produces the following kernel oops. Unable to handle kernel pointer dereference at virtual kernel address 2000000000 Oops: 0038 [#1] PREEMPT SMP Modules linked in: CPU: 0 Not tainted 2.6.31-rc6-next-20090819-dirty #18 Process kthreadd (pid: 818, task: 000000003ea207e8, ksp: 000000003e813eb8) Krnl PSW : 0704100180000000 00000000000ea54c (ftrace_syscall_exit+0x58/0xdc) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:0 CC:1 PM:0 EA:3 Krnl GPRS: 0000000000000000 00000000000e0000 ffffffffffffffff 20000000008c2650 0000000000000007 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 ffffffffffffffff 000000003e813d78 000000003e813f58 0000000000505ba8 000000003e813e18 000000003e813d78 Krnl Code: 00000000000ea540: e330d0000008 ag %r3,0(%r13) 00000000000ea546: a7480007 lhi %r4,7 00000000000ea54a: 1442 nr %r4,%r2 >00000000000ea54c: e31030000090 llgc %r1,0(%r3) 00000000000ea552: 5410d008 n %r1,8(%r13) 00000000000ea556: 8a104000 sra %r1,0(%r4) 00000000000ea55a: 5410d00c n %r1,12(%r13) 00000000000ea55e: 1211 ltr %r1,%r1 Call Trace: ([<0000000000000000>] 0x0) [<000000000001fa22>] do_syscall_trace_exit+0x132/0x18c [<000000000002d0c4>] sysc_return+0x0/0x8 [<000000000001c738>] kernel_thread_starter+0x0/0xc Last Breaking-Event-Address: [<00000000000ea51e>] ftrace_syscall_exit+0x2a/0xdc Signed-off-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com> Acked-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Martin Bligh <mbligh@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> LKML-Reference: <20090825125027.GE4639@cetus.boeblingen.de.ibm.com> Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
-
- 26 8月, 2009 8 次提交
-
-
由 Zhaolei 提交于
There are many clock sources for the tracing system but we can only enable/disable one at a time with the trace/options file. We can move the setting of clock-source out of options and add a separate file for it: # cat trace_clock [local] global # echo global > trace_clock # cat trace_clock local [global] Signed-off-by: NZhao Lei <zhaolei@cn.fujitsu.com> LKML-Reference: <4A939D08.6050604@cn.fujitsu.com> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
由 Li Zefan 提交于
Usually, char * entries are dangerous in traces because the string can be released whereas a pointer to it can still wait to be read from the ring buffer. But sometimes we can assume it's safe, like in case of RO data (eg: __file__ or __line__, used in bkl trace event). If these RO data are in a module and so is the call to the trace event, then it's safe, because the ring buffer will be flushed once this module get unloaded. To allow char * to be treated as a string: TRACE_EVENT(..., TP_STRUCT__entry( __field_ext(const char *, name, FILTER_PTR_STRING) ... ) ... ); The filtering will not dereference "char *" unless the developer explicitly sets FILTER_PTR_STR in __field_ext. Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> LKML-Reference: <4A7B9287.90205@cn.fujitsu.com> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
由 Li Zefan 提交于
Add __field_ext(), so a field can be assigned to a specific filter_type, which matches a corresponding filter function. For example, a later patch will allow this: __field_ext(const char *, str, FILTER_PTR_STR); Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> LKML-Reference: <4A7B9272.60507095@cn.fujitsu.com> [ Fixed a -1 to FILTER_OTHER Forward ported to latest kernel. ] Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
由 Li Zefan 提交于
The type of a field is stored as a string in @type, and here we add @filter_type which is an enum value. This prepares for later patches, so we can specifically assign different @filter_type for the same @type. For example normally a "char *" field is treated as a ptr, but we may want it to be treated as a string when doing filting. Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> LKML-Reference: <4A7B925E.9030605@cn.fujitsu.com> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
由 Josh Stone 提交于
This converts the syscall_enter/exit tracepoints into TRACE_EVENTs, so you can have generic ftrace events that capture all system calls with arguments and return values. These generic events are also renamed to sys_enter/exit, so they're more closely aligned to the specific sys_enter_foo events. Signed-off-by: NJosh Stone <jistone@redhat.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Martin Bligh <mbligh@google.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> LKML-Reference: <1251150194-1713-5-git-send-email-jistone@redhat.com> Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
-
由 Josh Stone 提交于
It's not strictly correct for the tracepoint reg/unreg callbacks to occur when a client is hooking up, because the actual tracepoint may not be present yet. This happens to be fine for syscall, since that's in the core kernel, but it would cause problems for tracepoints defined in a module that hasn't been loaded yet. It also means the reg/unreg has to be EXPORTed for any modules to use the tracepoint (as in SystemTap). This patch removes DECLARE_TRACE_WITH_CALLBACK, and instead introduces DEFINE_TRACE_FN which stores the callbacks in struct tracepoint. The callbacks are used now when the active state of the tracepoint changes in set_tracepoint & disable_tracepoint. This also introduces TRACE_EVENT_FN, so ftrace events can also provide registration callbacks if needed. Signed-off-by: NJosh Stone <jistone@redhat.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Martin Bligh <mbligh@google.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> LKML-Reference: <1251150194-1713-4-git-send-email-jistone@redhat.com> Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
-
由 Josh Stone 提交于
The syscall enter/exit tracepoints are only supported on archs that HAVE_SYSCALL_TRACEPOINTS, so the declarations should be #ifdef'ed. Also, the definition of syscall_regfunc and syscall_unregfunc should depend on this same config, rather than the ftrace-specific one. Signed-off-by: NJosh Stone <jistone@redhat.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Martin Bligh <mbligh@google.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> LKML-Reference: <1251150194-1713-3-git-send-email-jistone@redhat.com> Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
-
由 Josh Stone 提交于
s/HAVE_FTRACE_SYSCALLS/HAVE_SYSCALL_TRACEPOINTS/g s/TIF_SYSCALL_FTRACE/TIF_SYSCALL_TRACEPOINT/g The syscall enter/exit tracing is no longer specific to just ftrace, so they now have names that reflect their tie to tracepoints instead. Signed-off-by: NJosh Stone <jistone@redhat.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Martin Bligh <mbligh@google.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> LKML-Reference: <1251150194-1713-2-git-send-email-jistone@redhat.com> Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
-
- 25 8月, 2009 1 次提交
-
-
由 Anirban Sinha 提交于
Signed-off-by: NAnirban Sinha <asinha@zeugmasystems.com> Reviewed-by: NLi Zefan <lizf@cn.fujitsu.com> Cc: "Oleg Nesterov" <oleg@tv-sign.ru> LKML-Reference: <DDFD17CC94A9BD49A82147DDF7D545C501EA9047@exchange.ZeugmaSystems.local> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 20 8月, 2009 1 次提交
-
-
由 Li Zefan 提交于
Before: # echo 1 > events/syscalls/sys_enter_sync/enable # cat events/syscalls/sys_enter_sync/format ... field:int nr; offset:12; size:4; print fmt: "# sync # cat trace ... sync-8950 [000] 2366.087670: sys_sync( After: # echo 1 > events/syscalls/sys_enter_sync/enable # cat events/syscalls/sys_enter_sync/format ... field:int nr; offset:12; size:4; print fmt: "" # sync # cat trace sync-2134 [001] 136.780735: sys_sync() Reported-by: NMasami Hiramatsu <mhiramat@redhat.com> Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> LKML-Reference: <4A8D05AF.20103@cn.fujitsu.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 19 8月, 2009 5 次提交
-
-
由 Li Zefan 提交于
Add filtering support for syscall events: # echo 'mode == 0666' > events/syscalls/sys_enter_open # echo 'ret == 0' > events/syscalls/sys_exit_open # echo 1 > events/syscalls/sys_enter_open # echo 1 > events/syscalls/sys_exit_open # cat trace ... modprobe-3084 [001] 117.463140: sys_open(filename: 917d3e8, flags: 0, mode: 1b6) modprobe-3084 [001] 117.463176: sys_open -> 0x0 less-3086 [001] 117.510455: sys_open(filename: 9c6bdb8, flags: 8000, mode: 1b6) sendmail-2574 [001] 122.145840: sys_open(filename: b807a365, flags: 0, mode: 1b6) ... Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <4A8BAFCB.1040006@cn.fujitsu.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Li Zefan 提交于
Extract duplicate code. Also prepare for the later patch. Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <4A8BAFB8.1010304@cn.fujitsu.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Li Zefan 提交于
This parameter is needed by syscall events to add define_fields() handler. Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <4A8BAF90.6060801@cn.fujitsu.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Li Zefan 提交于
Add "format" file for syscall exit events: # cat events/syscalls/sys_exit_open/format name: sys_exit_open ID: 344 format: field:unsigned short common_type; offset:0; size:2; field:unsigned char common_flags; offset:2; size:1; field:unsigned char common_preempt_count; offset:3; size:1; field:int common_pid; offset:4; size:4; field:int common_tgid; offset:8; size:4; field:int nr; offset:12; size:4; field:unsigned long ret; offset:16; size:4; Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <4A8BAF61.3060307@cn.fujitsu.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Li Zefan 提交于
The "format" file of a trace event is originally for parsers to parse ftrace binary output. But the "format" file of a syscall event can only be used by perfcounter, because it describes the format of struct syscall_enter_record not struct syscall_trace_enter. To fix this, we remove struct syscall_enter_record, and then struct syscall_trace_enter will be used by both perf profile and ftrace. Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <4A8BAF39.1030404@cn.fujitsu.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 17 8月, 2009 5 次提交
-
-
由 Li Zefan 提交于
Use seq_release_private(). Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Li Zefan <lizf@cn.fujitsu.com> LKML-Reference: <4A891AAB.8090701@cn.fujitsu.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Li Zefan 提交于
Extract duplicate code in t_start() and t_next(). Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <4A891A91.4030602@cn.fujitsu.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Li Zefan 提交于
One entry is missing in the output of a stat file. The cause is, when stat_seq_start() is called the 2nd time, we should start from the (pos-1)th elem in the rbtree but not pos, because pos == 0 is the header. Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <4A891A65.70009@cn.fujitsu.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Li Zefan 提交于
When syscall tracing was implemented as a tracer, "syscall_arg_type" trace option could be set to enable the display of syscall parameter types. Now this option is gone since it's no longer a tracer, but the code is still there but dead. So we remove dead code and re-enable the printing of paramete types via the verbose option: # echo verbose > trace_options # echo syscalls > set_event # cat trace ... bash-3331 [000] 95.348937: sys_fcntl64 -> 0x1 bash-3331 [000] 95.348942: sys_close(unsigned int fd: a) ... Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jason Baron <jbaron@redhat.com> LKML-Reference: <4A891AF6.5050102@cn.fujitsu.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Li Zefan 提交于
Add trace points to trace module_load, module_free, module_get, module_put and module_request, and use trace_event facility to get the trace output. Here's the sample output: TASK-PID CPU# TIMESTAMP FUNCTION | | | | | <...>-42 [000] 1.758380: module_request: fb0 wait=1 call_site=fb_open ... <...>-60 [000] 3.269403: module_load: scsi_wait_scan <...>-60 [000] 3.269432: module_put: scsi_wait_scan call_site=sys_init_module refcnt=0 <...>-61 [001] 3.273168: module_free: scsi_wait_scan ... <...>-1021 [000] 13.836081: module_load: sunrpc <...>-1021 [000] 13.840589: module_put: sunrpc call_site=sys_init_module refcnt=-1 <...>-1027 [000] 13.848098: module_get: sunrpc call_site=try_module_get refcnt=0 <...>-1027 [000] 13.848308: module_get: sunrpc call_site=get_filesystem refcnt=1 <...>-1027 [000] 13.848692: module_put: sunrpc call_site=put_filesystem refcnt=0 ... modprobe-2587 [001] 1088.437213: module_load: trace_events_sample F modprobe-2587 [001] 1088.437786: module_put: trace_events_sample call_site=sys_init_module refcnt=0 Note: - the taints flag can be 'F', 'C' and/or 'P' if mod->taints != 0 - the module refcnt is percpu, so it can be negative in a specific cpu Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Acked-by: NRusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Rusty Russell <rusty@rustcorp.com.au> LKML-Reference: <4A891B3C.5030608@cn.fujitsu.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 14 8月, 2009 1 次提交
-
-
由 Ingo Molnar 提交于
The new syscall_regfunc()/unregfunc() functions rely on the existence of TIF_SYSCALL_FTRACE - but that TIF flag is only offered by HAVE_FTRACE_SYSCALLS. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 12 8月, 2009 5 次提交
-
-
由 Frederic Weisbecker 提交于
This bring the support for raw syscall events in perfcounters. The arguments or exit value are saved as a raw sample using the PERF_SAMPLE_RAW attribute in a perf counter. Example (for now you must explicitly set the PERF_SAMPLE_RAW flag in perf record): perf record -e syscalls:sys_enter_open -f -F 1 -a perf report -D 0x2cbb8 [0x50]: event: 9 . . ... raw event: size 80 bytes . 0000: 09 00 00 00 02 00 50 00 20 e9 39 ab 0a 7f 00 00 ......P. .9.... . 0010: bc 14 00 00 bc 14 00 00 01 00 00 00 00 00 00 00 ............... . 0020: 2c 00 00 00 15 01 01 00 bc 14 00 00 bc 14 00 00 ,.............. ^ ^ ^ ^ ^ ^ ^ .......................... Event Size struct trace_entry . 0030: 00 00 00 00 46 98 43 02 00 00 00 00 80 08 00 00 ....F.C........ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ptr to file name open flags . 0040: 00 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00 ............... ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ . open mode padding 0x2cbb8 [0x50]: PERF_EVENT_SAMPLE (IP, 2): 5308: 0x7f0aab39e920 period: 1 Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Martin Bligh <mbligh@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Masami Hiramatsu <mhiramat@redhat.com>
-
由 Frederic Weisbecker 提交于
Define the format of the syscall trace fields to parse the binary values from a raw trace using the syscall events "format" file. This is defined dynamically using the syscalls metadata. It prepares the export of syscall event raw records to perf counters. Example: $ cat /debug/tracing/events/syscalls/sys_enter_sched_getparam/format name: sys_enter_sched_getparam ID: 39 format: field:unsigned short common_type; offset:0; size:2; field:unsigned char common_flags; offset:2; size:1; field:unsigned char common_preempt_count; offset:3; size:1; field:int common_pid; offset:4; size:4; field:int common_tgid; offset:8; size:4; field:pid_t pid; offset:12; size:8; field:struct sched_param * param; offset:20; size:8; print fmt: "pid: 0x%08lx, param: 0x%08lx", ((unsigned long)(REC->pid)), ((unsigned long)(REC->param)) Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Martin Bligh <mbligh@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Jason Baron <jbaron@redhat.com>
-
由 Frederic Weisbecker 提交于
Add the struct ftrace_event_call as a parameter of its show_format() callback. This way we can use it from the syscall trace events to retrieve the syscall name from the ftrace event call parameter and describe its fields using the syscalls metadata. Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Martin Bligh <mbligh@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Jason Baron <jbaron@redhat.com>
-
由 Jason Baron 提交于
The perf counter support is automated for usual trace events. But we have to define specific callbacks for this to handle syscalls trace events Make 'perf stat -e syscalls:sys_enter_blah' work with syscall style tracepoints. Signed-off-by: NJason Baron <jbaron@redhat.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Martin Bligh <mbligh@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
-
由 Jason Baron 提交于
The current state of syscalls tracepoints generates only one event id for every syscall events. This patch associates an id with each syscall trace event, so that we can identify each syscall trace event using the 'perf' tool. Signed-off-by: NJason Baron <jbaron@redhat.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Martin Bligh <mbligh@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
-