- 22 5月, 2008 24 次提交
-
-
由 Pavel Emelyanov 提交于
Some places iterate over the checked list right after the check itself, so even if the list is empty, the list_for_each_xxx iterator will make everything right by himself. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Acked-by: NJay Vosburgh <fubar@us.ibm.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Pavel Emelyanov 提交于
Many places either do not modify the list under the list_for_each_xxx, or break out of the loop as soon as the first element is removed. Thus, this _safe iteration just occupies some unneeded .text space and requires an additional variable. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Acked-by: NJay Vosburgh <fubar@us.ibm.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Pavel Emelyanov 提交于
While we're fixing the bond_create, I hope it's OK to polish it a bit after the fixes. The third argument is NULL at the first caller and is ignored by the second one, so remove it. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Acked-by: NJay Vosburgh <fubar@us.ibm.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Jay Vosburgh 提交于
Remove bond_has_ip and all references to it. With this change, the ARP monitor will always send ARP probes if the master is up and has at least one slave. If the bond has an IP address, it is used in the ARP probe; if not, the probes are sent with all zeros in the sender's IP address (which is consistent with an RFC 2131 4.4.1 duplicate address probe). This is useful for cases when bonding itself is hidden underneath a layer of virtual devices, e.g., with Xen. Change suggested by Tsutomu Fujii <t-fujii@nb.jp.nec.com>, who included a one-line patch that only affected active-backup mode. Signed-off-by: NJay Vosburgh <fubar@us.ibm.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Jay Vosburgh 提交于
Convert bonding to use msecs_to_jiffies instead of doing the math. For the ARP monitor, there was an underflow problem that could result in an infinite loop. The miimon already had that worked around, but this is cleaner. Originally by Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Jay Vosburgh corrected a math error in the original; Nicolas' original commit message is: When setting arp_interval parameter to a very low value, delta_in_ticks for next arp might become 0, causing an infinite loop. See http://bugzilla.kernel.org/show_bug.cgi?id=10680 Same problem for miimon parameter already fixed, but fix might be enhanced, by using msecs_to_jiffies() function. Signed-off-by: NNicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: NJay Vosburgh <fubar@us.ibm.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Divy Le Ray 提交于
Add LRO support. Signed-off-by: NDivy Le Ray <divy@chelsio.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Divy Le Ray 提交于
Add page support to Jumbo frame Rx queues. Signed-off-by: NDivy Le Ray <divy@chelsio.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Divy Le Ray 提交于
Take potential dma mapping errors in account. Signed-off-by: NDivy Le Ray <divy@chelsio.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Allan Stephens 提交于
This patch ensures that TIPC's topology service and configuration service are shut down before switching into "network mode". This ensures that TIPC does not mistakenly try to send unnecessary "publication withdraw" messages to other nodes before it is fully initialized for sending off-node messages. Note that the node's current network address is now updated only after the two services are shut down; this ensures that any existing connections to the topology server are terminated correctly using the old address. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Allan Stephens 提交于
This patch ensures that the "previous node" field in any existing TIPC port message header templates is updated properly when a TIPC network address is assigned to the node. (Previously, only the "originating node" field was updated.) Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Allan Stephens 提交于
This patch optimizes TIPC neighbor discovery code to avoid testing for a null node pointer when the pointer is already known to be non-null. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Allan Stephens 提交于
This patch ensures that the simultaneous discovery of the same neighboring node by multiple interfaces does not cause TIPC to add the node into its internal data structures more than once. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Allan Stephens 提交于
This patch prevents a TIPC configuration command requiring network administrator privileges from triggering an skbuff underrun if it is issued by a process lacking those privileges. The revised error handling code avoids the use of a potentially uninitialized global variable by transforming the unauthorized command into a new command, then following the standard command processing path to generate the required error message. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Similar to ipmr. [ Fix build failures -DaveM ] Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
These devices use the private area of appropriate size for statistics. Turning them to use on-device ones make them "privless" and thus - really small wrt kmalloc cache, they are allocated from. Besides, code looks nicer, because of absence of multi-braced type casts and dereferences. [ Fix build failures -DaveM ] Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
This tunnel uses its own private structure and requires separate patch to switch from private stats to on-device ones. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
All users already use on-device statistics, so this field can be safely removed. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
The ipmr uses ipip tunnels for its purposes and updates the tunnels' stats, but the ipip driver is already switched to use on-device ones. Actually, this is a part of the patch #4 from this set. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Just switch from tunnel->stat to tunnel->dev->stats. The ip_tunnel->stat member itself will be removed after I fix its other users (very soon). Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Even though bridges require 6 fields from struct net_device_stats, the on-device stats are always there, so we may just use them. The br_dev_get_stats is no longer required after this. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
And so does the pointer is returns, but sysfs and netlinks still check for both cases. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 5月, 2008 11 次提交
-
-
由 Pavel Emelyanov 提交于
There are some sysctls left to be switched to read-only, but they are all in ipv6, so complete with them. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Parts of fragments-related sysctls are read-only, but this is done by cloning all the tables and dropping write-bits from mode. Do the same but with read-only root. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
The error code is ignored now, but ipv6 is a module and one can be loaded under memory pressure, so the error may occur (in theory). Besides, I'm going to handle error returned from registering a read-only part of the table, so ignoring this one, while handing the other one would look strange. (However, this possibility of error is rather small, so I'm not sure whether this is a candidate for current net tree). Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
The fragments sysctls also contains some, that are to be visible, but read-only in net namespaces. The naming in net/core/sysctl_net_core.c is - tables, that are to be registered in namespaces have a "ns" word in their names. So rename ones in ipv4/ip_fragment.c and ipv6/reassembly.c to fit this. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Most of the net/core/xxx sysctls are read-only now, but this goal is achieved with excessive memory consumption in each namespace - the whole table is cloned and most of the entries in it are ~= 0222. Split it into two parts and register (the largest) one at the read-only root. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
This one stores all ctl-heads in one list and restricts the permissions not give write access to non-init net namespaces. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Allan Stephens 提交于
This patch contains a set of cosmetic changes to TIPC's network topology service subsystem, including: - updates to comments (including copyright dates) - re-ordering structure fields to group them more logically - removal of optional debugging code that is no longer required - minor changes to whitespace to conform to Linux coding conventions Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Allan Stephens 提交于
This patch modifies TIPC's network topology service so that it only requires a single reference table entry per subscriber connection, rather than two. This is achieved by letting the reference to the server port communicating with the subscriber act as the reference to the subscriber object itself. (Since the subscriber cannot exist without its port, and vice versa, this dual role for the reference is perfectly natural.) This consolidation reduces the size of the reference table by 50% in the default configuration. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Allan Stephens 提交于
This patch fixes TIPC's topology server so that it does byte swapping correctly when endianness conversion is required. (Note: This bug only impacted an application if it issues a subscription request to a topology server on another node, rather than the server on it's own node; since the topology server is normally not accessible by off-node applications, most TIPC applications were not impacted by the bug.) Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Allan Stephens 提交于
This patch enables TIPC's topology server code to do customized endianness conversions on a per-subscription basis. (This capability is needed to support the upcoming consolidation of subscriber and subscription object references.) Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Allan Stephens 提交于
This patch enables TIPC's topology server code to do customized overlap detection handling on a per-subscription basis. (This capability is needed to support the upcoming introduction of multi-cluster TIPC networks.) Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 5月, 2008 5 次提交
-
-
由 Michael Chan 提交于
Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Benjamin Li 提交于
Instead of assigning values for the struct cpu_reg's at runtime, we already know these values at compile time. Therefore, we can use designated initializers, to initialize these structures and not have to incur this assignment cost at run-time. Signed-off-by: NBenjamin Li <benli@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Benjamin Li 提交于
To make the bnx2 code more consistent, all instances of RX_COPY_THRESH have been changed to BNX2_RX_COPY_THRESH. Signed-off-by: NBenjamin Li <benli@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Benjamin Li 提交于
The rx_offset field is set to a constant value and initialized only once. By replacing all references to the rx_offset field, we can eliminate rx_offset from the bnx2 structure. This will save 4 bytes for every bnx2 instance. [Added parentheses to the definition of BNX2_RX_OFFSET, as noted by Ben Hutchings.] Signed-off-by: NBenjamin Li <benli@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wendy Xiong 提交于
Add PCI recovery functions to the driver. The initial pci state is also saved so the the MSI state can be restored during PCI recovery. Signed-off-by: NWendy Xiong <wendyx@us.ibm.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-