- 21 1月, 2009 1 次提交
-
-
由 Huang Weiyi 提交于
Removed unused #include <version.h>'s in btrfs Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 06 1月, 2009 3 次提交
-
-
由 Yan Zheng 提交于
btrfs_drop_extents doesn't change file extent's ram_bytes in the case of booked extent. To be consistent, we should also not change ram_bytes when truncating existing extent. Signed-off-by: NYan Zheng <zheng.yan@oracle.com>
-
由 Chris Mason 提交于
There were many, most are fixed now. struct-funcs.c generates some warnings but these are bogus. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 yanhai zhu 提交于
Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 12 12月, 2008 1 次提交
-
-
由 Yan Zheng 提交于
Checksums on data can be disabled by mount option, so it's possible some data extents don't have checksums or have invalid checksums. This causes trouble for data relocation. This patch contains following things to make data relocation work. 1) make nodatasum/nodatacow mount option only affects new files. Checksums and COW on data are only controlled by the inode flags. 2) check the existence of checksum in the nodatacow checker. If checksums exist, force COW the data extent. This ensure that checksum for a given block is either valid or does not exist. 3) update data relocation code to properly handle the case of checksum missing. Signed-off-by: NYan Zheng <zheng.yan@oracle.com>
-
- 09 12月, 2008 2 次提交
-
-
由 Chris Mason 提交于
The fsync logging code makes sure to onl copy the relevant checksum for each extent based on the file extent pointers it finds. But for compressed extents, it needs to copy the checksum for the entire extent. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
This adds a sequence number to the btrfs inode that is increased on every update. NFS will be able to use that to detect when an inode has changed, without relying on inaccurate time fields. While we're here, this also: Puts reserved space into the super block and inode Adds a log root transid to the super so we can pick the newest super based on the fsync log as well as the main transaction ID. For now the log root transid is always zero, but that'll get fixed. Adds a starting offset to the dev_item. This will let us do better alignment calculations if we know the start of a partition on the disk. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 02 12月, 2008 1 次提交
-
-
由 Christoph Hellwig 提交于
Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 13 11月, 2008 1 次提交
-
-
由 Yan Zheng 提交于
When extent needs to be split, btrfs_mark_extent_written truncates the extent first, then inserts a new extent and increases the reference count. The race happens if someone else deletes the old extent before the new extent is inserted. The fix here is increase the reference count in advance. This race is similar to the race in btrfs_drop_extents that was recently fixed. Signed-off-by: NYan Zheng <zheng.yan@oracle.com>
-
- 11 11月, 2008 2 次提交
-
-
由 Yan Zheng 提交于
btrfs_drop_extents will drop paths and search again when it needs to force COW of higher nodes. It was using the key it found during the last search as the offset for the next search. But, this wasn't always correct. The key could be from before our desired range, and because we're dropping the path, it is possible for file's items to change while we do the search again. The fix here is to make sure we don't search for something smaller than the offset btrfs_drop_extents was called with. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
This makes sure the orig_start field in struct extent_map gets set everywhere the extent_map structs are created or modified. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 10 11月, 2008 1 次提交
-
-
由 Yan Zheng 提交于
The decompress code doesn't take the logical offset in extent pointer into account. If the logical offset isn't zero, data will be decompressed into wrong pages. The solution used here is to record the starting offset of the extent in the file separately from the logical start of the extent_map struct. This allows us to avoid problems inserting overlapping extents. Signed-off-by: NYan Zheng <zheng.yan@oracle.com>
-
- 07 11月, 2008 1 次提交
-
-
由 Chris Mason 提交于
When reading compressed extents, try to put pages into the page cache for any pages covered by the compressed extent that readpages didn't already preload. Add an async work queue to handle transformations at delayed allocation processing time. Right now this is just compression. The workflow is: 1) Find offsets in the file marked for delayed allocation 2) Lock the pages 3) Lock the state bits 4) Call the async delalloc code The async delalloc code clears the state lock bits and delalloc bits. It is important this happens before the range goes into the work queue because otherwise it might deadlock with other work queue items that try to lock those extent bits. The file pages are compressed, and if the compression doesn't work the pages are written back directly. An ordered work queue is used to make sure the inodes are written in the same order that pdflush or writepages sent them down. This changes extent_write_cache_pages to let the writepage function update the wbc nr_written count. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 01 11月, 2008 1 次提交
-
-
由 Chris Mason 提交于
Make sure we keep page->mapping NULL on the pages we're getting via alloc_page. It gets set so a few of the callbacks can do the right thing, but in general these pages don't have a mapping. Don't try to truncate compressed inline items in btrfs_drop_extents. The whole compressed item must be preserved. Don't try to create multipage inline compressed items. When we try to overwrite just the first page of the file, we would have to read in and recow all the pages after it in the same compressed inline items. For now, only create single page inline items. Make sure we lock pages in the correct order during delalloc. The search into the state tree for delalloc bytes can return bytes before the page we already have locked. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 31 10月, 2008 3 次提交
-
-
由 Yan Zheng 提交于
This patch updates btrfs-progs for fallocate support. fallocate is a little different in Btrfs because we need to tell the COW system that a given preallocated extent doesn't need to be cow'd as long as there are no snapshots of it. This leverages the -o nodatacow checks. Signed-off-by: NYan Zheng <zheng.yan@oracle.com>
-
由 Yan Zheng 提交于
When dropping middle part of an extent, btrfs_drop_extents truncates the extent at first, then inserts a bookend extent. Since truncation and insertion can't be done atomically, there is a small period that the bookend extent isn't in the tree. This causes problem for functions that search the tree for file extent item. The way to fix this is lock the range of the bookend extent before truncation. Signed-off-by: NYan Zheng <zheng.yan@oracle.com>
-
由 Yan Zheng 提交于
This patch splits the hole insertion code out of btrfs_setattr into btrfs_cont_expand and updates btrfs_get_extent to properly handle the case that file extent items are not continuous. Signed-off-by: NYan Zheng <zheng.yan@oracle.com>
-
- 30 10月, 2008 1 次提交
-
-
由 Chris Mason 提交于
This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 09 10月, 2008 2 次提交
-
-
由 Yan Zheng 提交于
The offset field in struct btrfs_extent_ref records the position inside file that file extent is referenced by. In the new back reference system, tree leaves holding references to file extent are recorded explicitly. We can scan these tree leaves very quickly, so the offset field is not required. This patch also makes the back reference system check the objectid when extents are in deleting. Signed-off-by: NYan Zheng <zheng.yan@oracle.com>
-
由 Yan Zheng 提交于
This patch makes btrfs count space allocated to file in bytes instead of 512 byte sectors. Everything else in btrfs uses a byte count instead of sector sizes or blocks sizes, so this fits better. Signed-off-by: NYan Zheng <zheng.yan@oracle.com>
-
- 04 10月, 2008 1 次提交
-
-
由 Chris Mason 提交于
This reworks the btrfs O_DIRECT write code a bit. It had always fallen back to buffered IO and done an invalidate, but needed to be updated for the data=ordered code. The invalidate wasn't actually removing pages because they were still inside an ordered extent. This also combines the O_DIRECT/O_SYNC paths where possible, and kicks off IO in the main btrfs_file_write loop to keep the pipe down the the disk full as we process long writes. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 30 9月, 2008 1 次提交
-
-
由 Chris Mason 提交于
This improves the comments at the top of many functions. It didn't dive into the guts of functions because I was trying to avoid merging problems with the new allocator and back reference work. extent-tree.c and volumes.c were both skipped, and there is definitely more work todo in cleaning and commenting the code. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 26 9月, 2008 2 次提交
-
-
由 Zheng Yan 提交于
* Add an EXTENT_BOUNDARY state bit to keep the writepage code from merging data extents that are in the process of being relocated. This allows us to do accounting for them properly. * The balancing code relocates data extents indepdent of the underlying inode. The extent_map code was modified to properly account for things moving around (invalidating extent_map caches in the inode). * Don't take the drop_mutex in the create_subvol ioctl. It isn't required. * Fix walking of the ordered extent list to avoid races with sys_unlink * Change the lock ordering rules. Transaction start goes outside the drop_mutex. This allows btrfs_commit_transaction to directly drop the relocation trees. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
Btrfs had compatibility code for kernels back to 2.6.18. These have been removed, and will be maintained in a separate backport git tree from now on. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 25 9月, 2008 16 次提交
-
-
由 Zheng Yan 提交于
This patch makes the back reference system to explicit record the location of parent node for all types of extents. The location of parent node is placed into the offset field of backref key. Every time a tree block is balanced, the back references for the affected lower level extents are updated. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
Drop i_mutex during the commit Don't bother doing the fsync at all unless the dir is marked as dirtied and needing fsync in this transaction. For directories, this means that someone has unlinked a file from the dir without fsyncing the file. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
File syncs and directory syncs are optimized by copying their items into a special (copy-on-write) log tree. There is one log tree per subvolume and the btrfs super block points to a tree of log tree roots. After a crash, items are copied out of the log tree and back into the subvolume. See tree-log.c for all the details. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
While dropping snapshots, walk_down_tree does most of the work of checking reference counts and limiting tree traversal to just the blocks that we are freeing. It dropped and held the allocation mutex in strange and confusing ways, this commit changes it to only hold the mutex while actually freeing a block. The rest of the checks around reference counts should be safe without the lock because we only allow one process in btrfs_drop_snapshot at a time. Other processes dropping reference counts should not drop it to 1 because their tree roots already have an extra ref on the block. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
This avoids waiting for transactions with pages locked by breaking out the code to wait for the current transaction to close into a function called by btrfs_throttle. It also lowers the limits for where we start throttling. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Sven Wegener 提交于
Add a couple of #if's to follow API changes. Signed-off-by: NSven Wegener <sven.wegener@stealer.net> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Yan 提交于
The memory reclaiming issue happens when snapshot exists. In that case, some cache entries may not be used during old snapshot dropping, so they will remain in the cache until umount. The patch adds a field to struct btrfs_leaf_ref to record create time. Besides, the patch makes all dead roots of a given snapshot linked together in order of create time. After a old snapshot was completely dropped, we check the dead root list and remove all cache entries created before the oldest dead root in the list. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
A large reference cache is directly related to a lot of work pending for the cleaner thread. This throttles back new operations based on the size of the reference cache so the cleaner thread will be able to keep up. Overall, this actually makes the FS faster because the cleaner thread will be more likely to find things in cache. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
This changes the reference cache to make a single cache per root instead of one cache per transaction, and to key by the byte number of the disk block instead of the keys inside. This makes it much less likely to have cache misses if a snapshot or something has an extra reference on a higher node or a leaf while the first transaction that added the leaf into the cache is dropping. Some throttling is added to functions that free blocks heavily so they wait for old transactions to drop. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
Stress testing was showing data checksum errors, most of which were caused by a lookup bug in the extent_map tree. The tree was caching the last pointer returned, and searches would check the last pointer first. But, search callers also expect the search to return the very first matching extent in the range, which wasn't always true with the last pointer usage. For now, the code to cache the last return value is just removed. It is easy to fix, but I think lookups are rare enough that it isn't required anymore. This commit also replaces do_sync_mapping_range with a local copy of the related functions. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
* In btrfs_delete_inode, wait for ordered extents after calling truncate_inode_pages. This is much faster, and more correct * Properly clear our the PageChecked bit everywhere we redirty the page. * Change the writepage fixup handler to lock the page range and check to see if an ordered extent had been inserted since the improperly dirtied page was discovered * Wait for ordered extents outside the transaction. This isn't required for locking rules but does improve transaction latencies * Reduce contention on the alloc_mutex by dropping it while incrementing refs on a node/leaf and while dropping refs on a leaf. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
It was possible for stale mappings from disk to be used instead of the new pending ordered extent. This adds a flag to the extent map struct to keep it pinned until the pending ordered extent is actually on disk. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
btrfs_drop_extents is always called with a range lock held on the inode. But, it may operate on extents outside that range as it drops and splits them. This patch adds a per-inode mutex that is held while calling btrfs_drop_extents and while inserting new extents into the tree. It prevents races from two procs working against adjacent ranges in the tree. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-