- 18 12月, 2018 17 次提交
-
-
由 Vasundhara Volam 提交于
Currently firmware specific errors are returned directly in flash_device and reset ethtool hooks. Modify it to return linux standard errors to userspace when flashing operations fail. Signed-off-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Currently, the code allows ETS bandwidth weight 0 to be set on unused TCs. We should not set any DCB parameters on unused TCs at all. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Display the CoS counters as additional priority counters by looking up the priority to CoS queue mapping. If the TX extended port statistics block size returned by firmware is big enough to cover the CoS counters, then we will display the new priority counters. We call firmware to get the up-to-date pri2cos mapping to convert the CoS counters to priority counters. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
There are some minor differences when assigning VF resources on the new chips. The MSIX (NQ) resource has to be assigned and ring group is not needed on the new chips. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
When bringing up a device, the code checks to see if the number of MSIX has changed. pci_disable_msix() should be called first before changing the number of reserved NQs/CMPL rings. This ensures that the MSIX vectors associated with the NQs/CMPL rings are still properly mapped when pci_disable_msix() masks the vectors. This patch will prevent errors when RDMA support is added for the new 57500 chips. When the RDMA driver shuts down, the number of NQs is decreased and we must use the new sequence to prevent MSIX errors. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vasundhara Volam 提交于
bnxt_en requires same number of stat_ctxs as CP rings but RDMA requires only 1 stat_ctx. Also add a new parameter resv_stat_ctxs to better keep track of stat_ctxs reserved including resources used by RDMA. Add a stat_ctxs parameter to all the relevant resource reservation functions so we can reserve the correct number of stat_ctxs. Prior to this patch, we were not reserving the extra stat_ctx for RDMA and RDMA would not work on the new 57500 chips. Signed-off-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vasundhara Volam 提交于
Calling bnxt_set_max_func_stat_ctxs() to modify max stat_ctxs requested or freed by the RDMA driver is wrong. After introducing reservation of resources recently, the driver has to keep track of all stat_ctxs including the ones used by the RDMA driver. This will provide a better foundation for accurate accounting of the stat_ctxs. Signed-off-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vasundhara Volam 提交于
For bnxt_en driver, stat_ctxs created will always be same as cp_nr_rings. Remove extra variable that duplicates the value. Also introduce bnxt_get_avail_stat_ctxs_for_en() helper to get available stat_ctxs and bnxt_get_ulp_stat_ctxs() helper to return number of stat_ctxs used by RDMA. Signed-off-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
The available CP rings are calculated differently on the new 57500 chips, so add this helper to do this calculation correctly. The VFs will be assigned these available CP rings. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
The PF has a pool of NQs and MSIX vectors assigned to it based on NVRAM configurations. The number of usable MSIX vectors on the PF is the minimum of the NQs and MSIX vectors. Any excess NQs without associated MSIX may be used for the VFs, so we need to store this max_nqs value. max_nqs minus the NQs used by the PF will be the available NQs for the VFs. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stefano Brivio 提交于
Handling exceptions for direct UDP encapsulation in GUE (that is, UDP-in-UDP) leads to unbounded recursion in the GUE exception handler, syzbot reported. While draft-ietf-intarea-gue-06 doesn't explicitly forbid direct encapsulation of UDP in GUE, it probably doesn't make sense to set up GUE this way, and it's currently not even possible to configure this. Skip exception handling if the GUE proto/ctype field is set to the UDP protocol number. Should we need to handle exceptions for UDP-in-GUE one day, we might need to either explicitly set a bound for recursion, or implement a special iterative handling for these cases. Reported-and-tested-by: syzbot+43f6755d1c2e62743468@syzkaller.appspotmail.com Fixes: b8a51b38 ("fou, fou6: ICMP error handlers for FoU and GUE") Signed-off-by: NStefano Brivio <sbrivio@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joakim Tjernlund 提交于
This allows to control carrier from /sys/class/net/ethX/carrier for Fixed PHYs. Signed-off-by: NJoakim Tjernlund <joakim.tjernlund@infinera.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joakim Tjernlund 提交于
This allows to control carrier from /sys/class/net/ethX/carrier for Fixed PHYs. Signed-off-by: NJoakim Tjernlund <joakim.tjernlund@infinera.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joakim Tjernlund 提交于
This allows to control carrier from /sys/class/net/ethX/carrier for Fixed PHYs. Signed-off-by: NJoakim Tjernlund <joakim.tjernlund@infinera.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joakim Tjernlund 提交于
Drivers can use this as .ndo_change_carrier() to change carrier via /sys/class/net/ethX/carrier. Signed-off-by: NJoakim Tjernlund <joakim.tjernlund@infinera.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
kzalloc_node(..., GFP_KERNEL, node) will attempt to allocate memory as close as possible to the node. There is no need to fallback to kzalloc() if this has failed. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paolo Abeni 提交于
The kbuild bot reported a build breakage with CONFIG_RETPOLINE=n due to commit aaa5d90b ("net: use indirect call wrappers at GRO network layer"). I screwed the wrapper implementation for such config. Fix the issue properly ignoring the builtin symbols arguments, when retpoline is not enabled. Reported-by: Nkbuild test robot <lkp@intel.com> Fixes: aaa5d90b ("net: use indirect call wrappers at GRO network layer") Signed-off-by: NPaolo Abeni <pabeni@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 12月, 2018 23 次提交
-
-
由 David S. Miller 提交于
Ido Schimmel says: ==================== mlxsw: spectrum_acl: Add Bloom filter support Nir says: Spectrum-2 uses Bloom filter to reduce the number of lookups in the algorithmic TCAM (A-TCAM). HW performs multiple exact match lookups in a given region using a key composed of { packet & mask, mask ID, region ID }. The masks which are used in a region are called rule patterns or RP. When such multiple masks are used, the A-TCAM region uses an eRP (extended RP) table that describes which rule patterns are in use and defines the order of the lookup. When eRP table is used in a region, one way to reduce the number of the lookups is to consult a Bloom filter before doing the lookup. A Bloom filter is a space-efficient probabilistic data structure, on which a query returns either "possibly in set" or "definitely not in set". HW can skip a lookup if a query on the Bloom filter results a "definitely not set" response. The mlxsw driver implements a "counting filter" and when either a new entry is marked or the last entry is removed it will update the HW. Update of this counting filter occurs when rule is configured or deleted from a region. Patch #1 adds PEABFE register which is used for setting Bloom filter entries. Patch #2 adds Bloom filter resources. Patch #3 and patch #4 provide Bloom filter handling within mlxsw, by adding initialization and logic for updating the Bloom bit vector in HW. Patch #5 and patch #6 add required calls for Bloom filter update as part of rule configuration flow. Patch #7 handles transitions to and from eRP table. It uses a list to keep A-TCAM rules in order to update rules in Bloom filter, in cases of transitions from master mask based A-TCAM region to an eRP table based region and vice versa. Patch #8 removes a trick done on master RP index to a remaining RP, since Bloom filter is updated on eRP transitions. Finally, patch #9 activates Bloom filter mechanism in HW, by cancelling the bypass that was configured before and the remaining three patches are selftests that exercise the new code. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nir Dotan 提交于
The eRP table is active when there is more than a single rule pattern. It may be that the patterns are close enough and use delta mechanism. Bloom filter index computation is based on the values of {rule & mask, mask ID, region ID} where the rule delta bits must be cleared. Add a test that exercises Bloom filter with delta mechanism. Configure rules within delta range and pass a packet which is supposed to hit the correct rule. Signed-off-by: NNir Dotan <nird@mellanox.com> Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nir Dotan 提交于
Bloom filter index computation is based on the values of {rule & mask, mask ID, region ID} and the computation also varies according to the region key size. Add a test that exercises the possible combinations by creating multiple chains using different key sizes and then pass a frame that is supposed to to produce a hit on all of the regions. Signed-off-by: NNir Dotan <nird@mellanox.com> Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nir Dotan 提交于
Add a test that exercises Bloom filter code. Activate eRP table in the region by adding multiple rule patterns which with very high probability use different entries in the Bloom filter. Then send packets in order to check lookup hits on all relevant rules. Signed-off-by: NNir Dotan <nird@mellanox.com> Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nir Dotan 提交于
Now that mlxsw driver handles all aspects of updating the Bloom filter mechanism, set bf_bypass value to false and allow HW to use Bloom filter. Signed-off-by: NNir Dotan <nird@mellanox.com> Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nir Dotan 提交于
Bloom filter is updated on transitions from a single rule pattern, also called master RP, to eRP table and vice versa. Since rules are being written to or deleted from the Bloom filter on such transitions, it is not required to keep the same eRP bank ID for the master RP. Change master RP index assignment so it will be assigned with zero. This is consistent with the assignment of the first available spot that is used for allocating eRP's indices. Signed-off-by: NNir Dotan <nird@mellanox.com> Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nir Dotan 提交于
Bloom filter update is required only for rules which reside on an eRP. When the region has only a single rule pattern then eRP table is not used, however insertion of another pattern would trigger a move to an active eRP table so it is imperative to update the Bloom filter with all previously configured rules. Add a method that updates Bloom filter entries for all rules currently configured in the region, on the event of a transition from master mask to eRP, or vice versa. For that purpose, maintain a list of all A-TCAM rules within mlxsw_sp_acl_atcam_region. Signed-off-by: NNir Dotan <nird@mellanox.com> Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nir Dotan 提交于
Add calls to eRP module for updating Bloom filter when a rule is added or removed from the A-TCAM. eRP module will update the Bloom filter only for cases in which the region has an active eRP table. Signed-off-by: NNir Dotan <nird@mellanox.com> Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nir Dotan 提交于
Add Bloom filter update for rule insertion and rule removal scenarios. This is done within eRP module in order to assure that Bloom filter updates are done only for rules which are part of an eRP, as HW does not consult Bloom filter for entries when there is a single (master) mask in the region. Signed-off-by: NNir Dotan <nird@mellanox.com> Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nir Dotan 提交于
Spectrum-2 HW uses Bloom filter in order to skip lookups on specific eRPs. It uses crc-16-Msbit-first calculation over a specific layout of a rule's key fields combined with eRP ID as well as region ID. Per potential lookup, iff the Bloom filter entry of the calculated index is empty, then the lookup can be skipped. Hence, the mlxsw driver should update the Bloom filter entry per each rule insertion or deletion when rules are part of an eRP. Add functions for adding and deleting entries in the Bloom filter. In order to do so also add crc-16 computation based on the specific Spectrum-2 polynomial and a function for encoding the crc-16 input in the manner dictated by HW implementation. Signed-off-by: NNir Dotan <nird@mellanox.com> Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nir Dotan 提交于
Lay the foundations for Bloom filter handling. Introduce a new file for Bloom filter actions. Add struct mlxsw_sp_acl_bf to struct mlxsw_sp_acl_erp_core and initialize the Bloom filter data structure. Also take care of proper destruction when terminating. Signed-off-by: NNir Dotan <nird@mellanox.com> Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nir Dotan 提交于
Add the maximum Bloom filter logarithmic size per eRP table bank. Signed-off-by: NNir Dotan <nird@mellanox.com> Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nir Dotan 提交于
Bloom filter is a bit vector which allows the HW a fast lookup on a small size bit vector, that may reduce the number of lookups on the A-TCAM memory. PEABFE register allows setting values to the bits of the bit vector mentioned above. Add the register to be later used in A-TCAM optimizations. Signed-off-by: NNir Dotan <nird@mellanox.com> Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Roopa Prabhu says: ==================== rtnl fdb get This series adds support for rtnl fdb get similar to route get. v2: add nda_policy, fixes to exact msgs, strict nlmsg parsing v3: remove unnecessary attribute length checks + simplify code as pointed out by david ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Roopa Prabhu 提交于
tests the below three cases of bridge fdb get: [bridge, mac, vlan] [bridge_port, mac, vlan, flags=[NTF_MASTER]] [vxlandev, mac, flags=NTF_SELF] depends on iproute2 support for bridge fdb get. Signed-off-by: NRoopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Roopa Prabhu 提交于
This patch implements ndo_fdb_get for a vxlan device. Signed-off-by: NRoopa Prabhu <roopa@cumulusnetworks.com> Reviewed-by: NDavid Ahern <dsa@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Roopa Prabhu 提交于
This patch implements ndo_fdb_get for the bridge fdb. Signed-off-by: NRoopa Prabhu <roopa@cumulusnetworks.com> Acked-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com> Reviewed-by: NDavid Ahern <dsa@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Roopa Prabhu 提交于
This patch adds support for fdb get similar to route get. arguments can be any of the following (similar to fdb add/del/dump): [bridge, mac, vlan] or [bridge_port, mac, vlan, flags=[NTF_MASTER]] or [dev, mac, [vni|vlan], flags=[NTF_SELF]] Signed-off-by: NRoopa Prabhu <roopa@cumulusnetworks.com> Reviewed-by: NDavid Ahern <dsa@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Marek Vasut says: ==================== net: dsa: ksz: Clean up the tag code in prep for more switches Clean up the KSZ DSA tag code in preparation for adding more switches. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Marek Vasut 提交于
In case the destination address is link local, add override bit into the switch tag to let such a packet through the switch even if the port is blocked. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Tristram Ha <Tristram.Ha@microchip.com> Cc: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Cc: Woojung Huh <woojung.huh@microchip.com> Cc: David S. Miller <davem@davemloft.net> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tristram Ha 提交于
Factor out common code from the tag_ksz , so that the code can be used with other KSZ family switches which use differenly sized tags. Signed-off-by: NTristram Ha <Tristram.Ha@microchip.com> Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Cc: Woojung Huh <woojung.huh@microchip.com> Cc: David S. Miller <davem@davemloft.net> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tristram Ha 提交于
Rename the tag Kconfig option and related macros in preparation for addition of new KSZ family switches with different tag formats. Signed-off-by: NTristram Ha <Tristram.Ha@microchip.com> Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Cc: Woojung Huh <woojung.huh@microchip.com> Cc: David S. Miller <davem@davemloft.net> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jakub Kicinski 提交于
FW team asks to be able to not support RED even if NIC is capable of buffering for testing and experimentation. Add an opt-out flag. Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: NDirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-