hmi.c functions are unused unless sibling_subcore_state is nonzero, and
that in turn happens only if KVM is in use.  So move the code to
arch/powerpc/kvm/, putting it under CONFIG_KVM_BOOK3S_HV_POSSIBLE
rather than CONFIG_PPC_BOOK3S_64.  The sibling_subcore_state is also
included in struct paca_struct only if KVM is supported by the kernel.

Cc: Daniel Axtens <dja@axtens.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: kvm-ppc@vger.kernel.org
Cc: kvm@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

of_mm_gpiochip_add_data() calls mm_gc->save_regs() before
setting the data. Therefore ->save_regs() cannot use
gpiochip_get_data()

[    0.275940] Unable to handle kernel paging request for data at address 0x00000130
[    0.283120] Faulting instruction address: 0xc01b44cc
[    0.288175] Oops: Kernel access of bad area, sig: 11 [#1]
[    0.293343] PREEMPT CMPC885
[    0.296141] CPU: 0 PID: 1 Comm: swapper Not tainted 4.7.0-g65124df-dirty #68
[    0.304131] task: c6074000 ti: c6080000 task.ti: c6080000
[    0.309459] NIP: c01b44cc LR: c0011720 CTR: c0011708
[    0.314372] REGS: c6081d90 TRAP: 0300   Not tainted  (4.7.0-g65124df-dirty)
[    0.322267] MSR: 00009032 <EE,ME,IR,DR,RI>  CR: 24000028  XER: 20000000
[    0.328813] DAR: 00000130 DSISR: c0000000
GPR00: c01b6d0c c6081e40 c6074000 c6017000 c9028000 c601d028 c6081dd8 00000000
GPR08: c601d028 00000000 ffffffff 00000001 24000044 00000000 c0002790 00000000
GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 c05643b0 00000083
GPR24: c04a1a6c c0560000 c04a8308 c04c6480 c0012498 c6017000 c7ffcc78 c6017000
[    0.360806] NIP [c01b44cc] gpiochip_get_data+0x4/0xc
[    0.365684] LR [c0011720] cpm1_gpio16_save_regs+0x18/0x44
[    0.370972] Call Trace:
[    0.373451] [c6081e50] [c01b6d0c] of_mm_gpiochip_add_data+0x70/0xdc
[    0.379624] [c6081e70] [c00124c0] cpm_init_par_io+0x28/0x118
[    0.385238] [c6081e80] [c04a8ac0] do_one_initcall+0xb0/0x17c
[    0.390819] [c6081ef0] [c04a8cbc] kernel_init_freeable+0x130/0x1dc
[    0.396924] [c6081f30] [c00027a4] kernel_init+0x14/0x110
[    0.402177] [c6081f40] [c000b424] ret_from_kernel_thread+0x5c/0x64
[    0.408233] Instruction dump:
[    0.411168] 4182fafc 3f80c040 48234c6d 3bc0fff0 3b9c5ed0 4bfffaf4 81290020 712a0004
[    0.418825] 4182fb34 48234c51 4bfffb2c 81230004 <80690130> 4e800020 7c0802a6 9421ffe0
[    0.426763] ---[ end trace fe4113ee21d72ffa ]---

fixes: e65078f1 ("powerpc: sysdev: cpm1: use gpiochip data pointer")
fixes: a14a2d48 ("powerpc: cpm_common: use gpiochip data pointer")
Cc: stable@vger.kernel.org
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

MCE must not enable MSR_RI until PACA_EXMC is no longer being used.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

MCE must not use PACA_EXGEN. When a general exception enables MSR_RI,
that means SPRN_SRR[01] and SPRN_SPRG are no longer used. However the
PACA save area is still in use.
Acked-by: NMahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

When booting from an OpenFirmware which supports it, we use the
"ibm,client-architecture-support" firmware call to communicate
our capabilities to firmware.

The format of the structure we pass to firmware is specified in
PAPR (Power Architecture Platform Requirements), or the public version
LoPAPR (Linux on Power Architecture Platform Reference).

Referring to table 244 in LoPAPR v1.1, option vector 5 contains a 4 byte
field at bytes 17-20 for the "Platform Facilities Enable". This is
followed by a 1 byte field at byte 21 for "Sub-Processor Represenation
Level".

Comparing to the code, there we have the Platform Facilities
options (OV5_PFO_*) at byte 17, but we fail to pad that field out to its
full width of 4 bytes. This means the OV5_SUB_PROCESSORS option is
incorrectly placed at byte 18.

Fix it by adding zero bytes for bytes 18, 19, 20, and comment the bytes
to hopefully make it clearer in future.

As far as I'm aware nothing actually consumes this value at this time,
so the effect of this bug is nil in practice.

It does mean we've been incorrectly setting bit 15 of the "Platform
Facilities Enable" option for the past ~3 1/2 years, so we should avoid
allocating that bit to anything else in future.

Fixes: df77c799 ("powerpc/pseries: Update ibm,architecture.vec for PAPR 2.7/POWER8")
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

We observed a kernel oops when running a PPC guest with config NR_CPUS=4
and qemu option "-smp cores=1,threads=8":

[   30.634781] Unable to handle kernel paging request for data at
address 0xc00000014192eb17
[   30.636173] Faulting instruction address: 0xc00000000003e5cc
[   30.637069] Oops: Kernel access of bad area, sig: 11 [#1]
[   30.637877] SMP NR_CPUS=4 NUMA pSeries
[   30.638471] Modules linked in:
[   30.638949] CPU: 3 PID: 27 Comm: migration/3 Not tainted
4.7.0-07963-g9714b26 #1
[   30.640059] task: c00000001e29c600 task.stack: c00000001e2a8000
[   30.640956] NIP: c00000000003e5cc LR: c00000000003e550 CTR:
0000000000000000
[   30.642001] REGS: c00000001e2ab8e0 TRAP: 0300   Not tainted
(4.7.0-07963-g9714b26)
[   30.643139] MSR: 8000000102803033 <SF,VEC,VSX,FP,ME,IR,DR,RI,LE,TM[E]>  CR: 22004084  XER: 00000000
[   30.644583] CFAR: c000000000009e98 DAR: c00000014192eb17 DSISR: 40000000 SOFTE: 0
GPR00: c00000000140a6b8 c00000001e2abb60 c0000000016dd300 0000000000000003
GPR04: 0000000000000000 0000000000000004 c0000000016e5920 0000000000000008
GPR08: 0000000000000004 c00000014192eb17 0000000000000000 0000000000000020
GPR12: c00000000140a6c0 c00000000ffffc00 c0000000000d3ea8 c00000001e005680
GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR20: 0000000000000000 c00000001e6b3a00 0000000000000000 0000000000000001
GPR24: c00000001ff85138 c00000001ff85130 000000001eb6f000 0000000000000001
GPR28: 0000000000000000 c0000000017014e0 0000000000000000 0000000000000018
[   30.653882] NIP [c00000000003e5cc] __cpu_disable+0xcc/0x190
[   30.654713] LR [c00000000003e550] __cpu_disable+0x50/0x190
[   30.655528] Call Trace:
[   30.655893] [c00000001e2abb60] [c00000000003e550] __cpu_disable+0x50/0x190 (unreliable)
[   30.657280] [c00000001e2abbb0] [c0000000000aca0c] take_cpu_down+0x5c/0x100
[   30.658365] [c00000001e2abc10] [c000000000163918] multi_cpu_stop+0x1a8/0x1e0
[   30.659617] [c00000001e2abc60] [c000000000163cc0] cpu_stopper_thread+0xf0/0x1d0
[   30.660737] [c00000001e2abd20] [c0000000000d8d70] smpboot_thread_fn+0x290/0x2a0
[   30.661879] [c00000001e2abd80] [c0000000000d3fa8] kthread+0x108/0x130
[   30.662876] [c00000001e2abe30] [c000000000009968] ret_from_kernel_thread+0x5c/0x74
[   30.664017] Instruction dump:
[   30.664477] 7bde1f24 38a00000 787f1f24 3b600001 39890008 7d204b78 7d05e214 7d0b07b4
[   30.665642] 796b1f24 7d26582a 7d204a14 7d29f214 <7d4048a8> 7d4a3878 7d4049ad 40c2fff4
[   30.666854] ---[ end trace 32643b7195717741 ]---

The reason of this is that in __cpu_disable(), when we try to set the
cpu_sibling_mask or cpu_core_mask of the sibling CPUs of the disabled
one, we don't check whether the current configuration employs those
sibling CPUs(hw threads). And if a CPU is not employed by a
configuration, the percpu structures cpu_{sibling,core}_mask are not
allocated, therefore accessing those cpumasks will result in problems as
above.

This patch fixes this problem by adding an addition check on whether the
id is no less than nr_cpu_ids in the sibling CPU iteration code.
Signed-off-by: NBoqun Feng <boqun.feng@gmail.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

These files were only including module.h for exception table
related functions.  We've now separated that content out into its
own file "extable.h" so now move over to that and avoid all the
extra header content in module.h that we don't really need to compile
these files.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Unsigned type is always non-negative, so the loop could not end in case
condition is never true.

The problem has been detected using semantic patch
scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This patch leverages 'struct pci_host_bridge' from the PCI subsystem
in order to free the pci_controller only after the last reference to
its devices is dropped (avoiding an oops in pcibios_release_device()
if the last reference is dropped after pcibios_free_controller()).

The patch relies on pci_host_bridge.release_fn() (and .release_data),
which is called automatically by the PCI subsystem when the root bus
is released (i.e., the last reference is dropped).  Those fields are
set via pci_set_host_bridge_release() (e.g. in the platform-specific
implementation of pcibios_root_bridge_prepare()).

It introduces the 'pcibios_free_controller_deferred()' .release_fn()
and it expects .release_data to hold a pointer to the pci_controller.

The function implictly calls 'pcibios_free_controller()', so an user
must *NOT* explicitly call it if using the new _deferred() callback.

The functionality is enabled for pseries (although it isn't platform
specific, and may be used by cxl).

Details on not-so-elegant design choices:

 - Use 'pci_host_bridge.release_data' field as pointer to associated
   'struct pci_controller' so *not* to 'pci_bus_to_host(bridge->bus)'
   in pcibios_free_controller_deferred().

   That's because pci_remove_root_bus() sets 'host_bridge->bus = NULL'
   (so, if the last reference is released after pci_remove_root_bus()
   runs, which eventually reaches pcibios_free_controller_deferred(),
   that would hit a null pointer dereference).

   The cxl/vphb.c code calls pci_remove_root_bus(), and the cxl folks
   are interested in this fix.

Test-case #1 (hold references)

  # ls -ld /sys/block/sd* | grep -m1 0021:01:00.0
  <...> /sys/block/sdaa -> ../devices/pci0021:01/0021:01:00.0/<...>

  # ls -ld /sys/block/sd* | grep -m1 0021:01:00.1
  <...> /sys/block/sdab -> ../devices/pci0021:01/0021:01:00.1/<...>

  # cat >/dev/sdaa & pid1=$!
  # cat >/dev/sdab & pid2=$!

  # drmgr -w 5 -d 1 -c phb -s 'PHB 33' -r
  Validating PHB DLPAR capability...yes.
  [  594.306719] pci_hp_remove_devices: PCI: Removing devices on bus 0021:01
  [  594.306738] pci_hp_remove_devices:    Removing 0021:01:00.0...
  ...
  [  598.236381] pci_hp_remove_devices:    Removing 0021:01:00.1...
  ...
  [  611.972077] pci_bus 0021:01: busn_res: [bus 01-ff] is released
  [  611.972140] rpadlpar_io: slot PHB 33 removed

  # kill -9 $pid1
  # kill -9 $pid2
  [  632.918088] pcibios_free_controller_deferred: domain 33, dynamic 1

Test-case #2 (don't hold references)

  # drmgr -w 5 -d 1 -c phb -s 'PHB 33' -r
  Validating PHB DLPAR capability...yes.
  [  916.357363] pci_hp_remove_devices: PCI: Removing devices on bus 0021:01
  [  916.357386] pci_hp_remove_devices:    Removing 0021:01:00.0...
  ...
  [  920.566527] pci_hp_remove_devices:    Removing 0021:01:00.1...
  ...
  [  933.955873] pci_bus 0021:01: busn_res: [bus 01-ff] is released
  [  933.955977] pcibios_free_controller_deferred: domain 33, dynamic 1
  [  933.955999] rpadlpar_io: slot PHB 33 removed
Suggested-By: NGavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: NMauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com>
Reviewed-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com>
Tested-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> # cxl
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

When cxl removes a vPHB, it's possible that the pci_controller may be freed
before all references to the devices on the vPHB have been released. This
in turn causes an invalid memory access when the devices are eventually
released, as pcibios_release_device() attempts to call the phb's
release_device hook.

In cxl_pci_vphb_remove(), remove the existing call to
pcibios_free_controller(). Instead, use
pcibios_free_controller_deferred() to free the pci_controller after all
devices have been released. Export pci_set_host_bridge_release() so we can
do this.

Cc: stable@vger.kernel.org
Signed-off-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com>
Reviewed-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Acked-by: NIan Munsie <imunsie@au1.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The field "owner" is set by the core.
Thus delete an unneeded initialisation.

Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The field "owner" is set by the core.
Thus delete an unneeded initialisation.

Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The field "owner" is set by core. Thus delete an extra initialisation.

Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Powerpc builds may fail with the following build error.

Error log:
In file included from ./arch/powerpc/include/asm/mmu_context.h:11:0,
                 from ./include/linux/mmu_context.h:4,
		 from mm/mmu_context.c:8:
./arch/powerpc/include/asm/cputhreads.h: In function 'get_tensr':
./arch/powerpc/include/asm/cputhreads.h:101:2: error:
	implicit declaration of function 'cpu_has_feature'

The problem can be triggered by configuring ppc64e_defconfig and selecting
CONFIG_TICK_CPU_ACCOUNTING instead of CONFIG_VIRT_CPU_ACCOUNTING_NATIVE.

Fixes: b92a226e ("powerpc: Move cpu_has_feature() to a separate file")
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Pull two parisc fixes from Helge Deller:
 "The first patch ensures that the high-res cr16 clocksource (which was
  added in kernel 4.7) gets choosen as default clocksource for parisc.

  The second patch moves the #define of EREFUSED down inside errno.h and
  thus unbreaks building the gccgo compiler"

* 'parisc-4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Fix order of EREFUSED define in errno.h
  parisc: Fix automatic selection of cr16 clocksource

This is an entirely new driver instead of yet another set of patches
to sb_edac.c because:

1) Mapping from PCI devices to socket/memory controller is significantly
   different. Skylake scatters devices on a socket across a number of
   PCI buses.
2) There is an extra level of interleaving via the "mcroute" register
   that would be a little messy to squeeze into the old driver.
3) Validation is getting too expensive. Changes to sb_edac need to
   be checked against Sandy Bridge, Ivy Bridge, Haswell, Broadwell and
   Knights Landing.
Acked-by: NAristeu Rozanski <aris@redhat.com>
Acked-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When building gccgo in userspace, errno.h gets parsed and the go include file
sysinfo.go is generated.

Since EREFUSED is defined to the same value as ECONNREFUSED, and ECONNREFUSED
is defined later on in errno.h, this leads to go complaining that EREFUSED
isn't defined yet.

Fix this trivial problem by moving the define of EREFUSED down after
ECONNREFUSED in errno.h (and clean up the indenting while touching this line).
Signed-off-by: NHelge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org

Commit 54b66800 (parisc: Add native high-resolution sched_clock()
implementation) added support to use the CPU-internal cr16 counters as reliable
clocksource with the help of HAVE_UNSTABLE_SCHED_CLOCK.

Sadly the commit missed to remove the hack which prevented cr16 to become the
default clocksource even on SMP systems.
Signed-off-by: NHelge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # 4.7+

The kernel test robot reported a usercopy failure in the new hardened
sanity checks, due to a page-crossing copy of the FPU state into the
task structure.

This happened because the kernel test robot was testing with SLOB, which
doesn't actually do the required book-keeping for slab allocations, and
as a result the hardening code didn't realize that the task struct
allocation was one single allocation - and the sanity checks fail.

Since SLOB doesn't even claim to support hardening (and you really
shouldn't use it), the straightforward solution is to just make the
usercopy hardening code depend on the allocator supporting it.
Reported-by: Nkernel test robot <xiaolong.ye@intel.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull i2c fixes from Wolfram Sang:
 "I2C has some pretty standard driver bugfixes and one minor cleanup"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: meson: Use complete() instead of complete_all()
  i2c: brcmstb: Use complete() instead of complete_all()
  i2c: bcm-kona: Use complete() instead of complete_all()
  i2c: bcm-iproc: Use complete() instead of complete_all()
  i2c: at91: fix support of the "alternative command" feature
  i2c: ocores: add missed clk_disable_unprepare() on failure paths
  i2c: cros-ec-tunnel: Fix usage of cros_ec_cmd_xfer()
  i2c: mux: demux-pinctrl: properly roll back when adding adapter fails

Pull device mapper fixes from Mike Snitzer:

 - a stable fix for DM round robin multipath path selector to disable
   preemption before using this_cpu_ptr()

 - a slight increase in DM crypt's mempool reserves to make swap ontop
   of DM crypt more performant

 - a few DM raid fixes to issues found while testing changes that were
   merged in v4.8-rc1

* tag 'dm-4.8-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm raid: support raid0 with missing metadata devices
  dm raid: enhance attempt_restore_of_faulty_devices() to support more devices
  dm raid: fix restoring of failed devices regression
  dm raid: fix frozen recovery regression
  dm crypt: increase mempool reserve to better support swapping
  dm round robin: do not use this_cpu_ptr() without having preemption disabled

Pull SCSI fixes from James Bottomley:
 "Six fairly small fixes.  The ipr, mpt3sas and ses ones all trigger
  oopses.  The megaraid one fixes an attach failure on io mapped only
  cards, the fcoe one is an obvious problem in the error path and the
  aacraid one is a theoretical security issue (ability to trick the
  kernel into a buffer overrun)"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  ses: Fix racy cleanup of /sys in remove_dev()
  mpt3sas: Fix resume on WarpDrive flash cards
  ipr: Fix sync scsi scan
  megaraid_sas: Fix probing cards without io port
  aacraid: Check size values after double-fetch from user
  fcoe: Use kfree_skb() instead of kfree()

Pull USB fixes from Greg KH:
 "Here are a number of USB fixes for reported issues for your tree.

  The normal amount of gadget fixes, xhci fixes, new device ids, and a
  few other minor things.  All of them have been in linux-next for a
  while, the full details are in the shortlog below"

* tag 'usb-4.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (43 commits)
  xhci: don't dereference a xhci member after removing xhci
  usb: xhci: Fix panic if disconnect
  xhci: really enqueue zero length TRBs.
  xhci: always handle "Command Ring Stopped" events
  cdc-acm: fix wrong pipe type on rx interrupt xfers
  usb: misc: usbtest: add fix for driver hang
  usb: dwc3: gadget: stop processing on HWO set
  usb: dwc3: don't set last bit for ISOC endpoints
  usb: gadget: rndis: free response queue during REMOTE_NDIS_RESET_MSG
  usb: udc: core: fix error handling
  usb: gadget: fsl_qe_udc: off by one in setup_received_handle()
  usb/gadget: fix gadgetfs aio support.
  usb: gadget: composite: Fix return value in case of error
  usb: gadget: uvc: Fix return value in case of error
  usb: gadget: fix check in sync read from ep in gadgetfs
  usb: misc: usbtest: usbtest_do_ioctl may return positive integer
  usb: dwc3: fix missing platform_set_drvdata() in dwc3_of_simple_probe()
  usb: phy: omap-otg: Fix missing platform_set_drvdata() in omap_otg_probe()
  usb: gadget: configfs: add mutex lock before unregister gadget
  usb: gadget: u_ether: fix dereference after null check coverify warning
  ...

Merge tag 'xfs-iomap-for-linus-4.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs

Pull xfs and iomap fixes from Dave Chinner:
 "Changes in this update:

  Regression fixes for XFS changes introduce in 4.8-rc1:
   - buffer IO accounting assert failure
   - ENOSPC block accounting reservation issue
   - DAX IO path page cache invalidation fix
   - rmapbt on-disk block count in agf
   - correct classification of rmap block type when updating AGFL.
   - iomap support for attribute fork mapping

  Regression fixes for iomap infrastructure in 4.8-rc1:
   - fiemap: honor FIEMAP_FLAG_SYNC
   - fiemap: implement FIEMAP_FLAG_XATTR support to fix XFS regression
   - make mark_page_accessed and pagefault_disable usage consistent with
     other IO paths"

* tag 'xfs-iomap-for-linus-4.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs:
  xfs: remove OWN_AG rmap when allocating a block from the AGFL
  xfs: (re-)implement FIEMAP_FLAG_XATTR
  xfs: simplify xfs_file_iomap_begin
  iomap: mark ->iomap_end as optional
  iomap: prepare iomap_fiemap for attribute mappings
  iomap: fiemap should honor the FIEMAP_FLAG_SYNC flag
  iomap: remove superflous pagefault_disable from iomap_write_actor
  iomap: remove superflous mark_page_accessed from iomap_write_actor
  xfs: store rmapbt block count in the AGF
  xfs: don't invalidate whole file on DAX read/write
  xfs: fix bogus space reservation in xfs_iomap_write_allocate
  xfs: don't assert fail on non-async buffers on ioacct decrement

Merge tag 'hwmon-for-linus-v4.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:
 "Fix a bug in it87 driver and URLs in ftsteutates driver"

* tag 'hwmon-for-linus-v4.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (ftsteutates) Correct ftp urls in driver documentation
  hwmon: (it87) Features mask must be 32 bit wide

Pull more drm fixes from Dave Airlie:
 "Daniel pointed out I'd missed some i915 fixes, and I also found a
  single etnaviv fix I missed.

  So here they are"

* tag 'drm-fixes-for-4.8-rc3-2' of git://people.freedesktop.org/~airlied/linux:
  drm/etnaviv: take GPU lock later in the submit process
  drm/i915: Fix modeset handling during gpu reset, v5.
  drm/i915: fix aliasing_ppgtt leak
  drm/i915: fix WaInsertDummyPushConstPs
  drm/i915: Fix iboost setting for SKL Y/U DP DDI buffer translation entry 2
  drm/i915/gen9: Give one extra block per line for SKL plane WM calculations
  drm/i915: Acquire audio powerwell for HD-Audio registers
  drm/i915: Add missing rpm wakelock to GGTT pread
  drm/i915/fbc: FBC causes display flicker when VT-d is enabled on Skylake
  drm/i915: Clean up the extra RPM ref on CHV with i915.enable_rc6=0
  drm/i915: Program iboost settings for HDMI/DVI on SKL
  drm/i915: Fix iboost setting for DDI with 4 lanes on SKL
  drm/i915: Handle ENOSPC after failing to insert a mappable node
  drm/i915: Flush GT idle status upon reset

Pull DeviceTree fixes from Rob Herring:

 - a couple of DT node ref counting fixes

 - fix __unflatten_device_tree for PPC PCI hotplug case

 - rework marking irq controllers as OF_POPULATED in cases where real
   driver is used.

 - disable of_platform_default_populate_init on PPC.  The change in
   initcall order causes problems which need to be sorted out later.

* tag 'devicetree-fixes-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  of: fix reference counting in of_graph_get_endpoint_by_regs
  of/platform: disable the of_platform_default_populate_init() for all the ppc boards
  ARM: imx6: mark GPC node as not populated after irq init to probe pm domain driver
  of/irq: Mark interrupt controllers as populated before initialisation
  drivers/of: Validate device node in __unflatten_device_tree()
  of: Delete an unnecessary check before the function call "of_node_put"

Pull documentation fixes from Jonathan Corbet:
 "Three small fixes for Sphinx-formatted documentation generation"

* tag '4.8-doc-fixes' of git://git.lwn.net/linux:
  doc-rst: customize RTD theme, drop padding of inline literal
  docs: kernel-documentation: remove some highlight directives
  docs: Set the Sphinx default highlight language to "guess"

Collection of i915 fixes.

* tag 'drm-intel-fixes-2016-08-15' of git://anongit.freedesktop.org/drm-intel:
  drm/i915: Fix modeset handling during gpu reset, v5.
  drm/i915: fix aliasing_ppgtt leak
  drm/i915: fix WaInsertDummyPushConstPs
  drm/i915: Fix iboost setting for SKL Y/U DP DDI buffer translation entry 2
  drm/i915/gen9: Give one extra block per line for SKL plane WM calculations
  drm/i915: Acquire audio powerwell for HD-Audio registers
  drm/i915: Add missing rpm wakelock to GGTT pread
  drm/i915/fbc: FBC causes display flicker when VT-d is enabled on Skylake
  drm/i915: Clean up the extra RPM ref on CHV with i915.enable_rc6=0
  drm/i915: Program iboost settings for HDMI/DVI on SKL
  drm/i915: Fix iboost setting for DDI with 4 lanes on SKL
  drm/i915: Handle ENOSPC after failing to insert a mappable node
  drm/i915: Flush GT idle status upon reset

Single GPU recovery fix
* 'drm-etnaviv-fixes' of git://git.pengutronix.de/git/lst/linux:
  drm/etnaviv: take GPU lock later in the submit process

Pull x86 fixes from Ingo Molnar:
 "An initrd microcode loading fix, and an SMP bootup topology setup fix
  to resolve crashes on SGI/UV systems if the BIOS is configured in a
  certain way"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/smp: Fix __max_logical_packages value setup
  x86/microcode/AMD: Fix initrd loading with CONFIG_RANDOMIZE_MEMORY=y

Pull timer fixes from Ingo Molnar:
 "Three clocksource driver fixes"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource/drivers/mips-gic-timer: Make gic_clocksource_of_init() return int
  clocksource/drivers/kona: Fix get_counter() error handling
  clocksource/drivers/time-armada-370-xp: Fix the clock reference

Pull scheduler fixes from Ingo Molnar:
 "Two cputime fixes - hopefully the last ones"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/cputime: Resync steal time when guest & host lose sync
  sched/cputime: Fix NO_HZ_FULL getrusage() monotonicity regression

Pull perf fixes from Ingo Molnar:
 "Mostly tooling fixes, but also start/stop filter related fixes, a perf
  event read() fix, a fix uncovered by fuzzing, and an uprobes leak fix"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Check return value of the perf_event_read() IPI
  perf/core: Enable mapping of the stop filters
  perf/core: Update filters only on executable mmap
  perf/core: Fix file name handling for start/stop filters
  perf/core: Fix event_function_local()
  uprobes: Fix the memcg accounting
  perf intel-pt: Fix occasional decoding errors when tracing system-wide
  tools: Sync kvm related header files for arm64 and s390
  perf probe: Release resources on error when handling exit paths
  perf probe: Check for dup and fdopen failures
  perf symbols: Fix annotation of objects with debuginfo files
  perf script: Don't disable use_callchain if input is pipe
  perf script: Show proper message when failed list scripts
  perf jitdump: Add the right header to get the major()/minor() definitions
  perf ppc64le: Fix build failure when libelf is not present
  perf tools mem: Fix -t store option for record command
  perf intel-pt: Fix ip compression

Pull locking fixes from Ingo Molnar:
 "Two lockless_dereference() related fixes"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/barriers: Suppress sparse warnings in lockless_dereference()
  Revert "drm/fb-helper: Reduce READ_ONCE(master) to lockless_dereference"

Pull arm64 fixes from Catalin Marinas:

 - Avoid a literal load with the MMU off on the CPU resume path
   (potential inconsistency between cache and RAM)

 - Build error with CONFIG_ACPI=n fixed

 - Compiler warning in the arch/arm64/mm/dump.c code fixed

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: Fix shift warning in arch/arm64/mm/dump.c
  arm64: kernel: avoid literal load of virtual address with MMU off
  arm64: Fix NUMA build error when !CONFIG_ACPI

Pull ARM fixes from Russell King:
 "Only three fixes this time:

   - Emil found an overflow problem with the memory layout sanity check.

   - Ard Biesheuvel noticed that late-allocated page tables (for EFI)
     weren't being properly constructed.

   - Guenter Roeck reported a problem found on qemu caused by the recent
     addr_limit changes"

* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: fix address limit restoration for undefined instructions
  ARM: 8591/1: mm: use fully constructed struct pages for EFI pgd allocations
  ARM: 8590/1: sanity_check_meminfo(): avoid overflow on vmalloc_limit

Pull power management fixes from Rafael Wysocki:
 "More hibernation-related material: one fix for a recent regression in
  the core, one small cleanup of the x86-64 resume code and a
  documentation update.

  Specifics:

   - Fix a hibernate core regression resulting from uncovering a latent
     bug in its implementation of memory bitmaps by a recent commit
     (James Morse).

   - Use __pa() to compute a physical address in the x86-64 code
     finalizing resume from hibernation (Rafael Wysocki).

   - Update power management documentation related to system sleep
     states to remove outdated information from it and to add a
     description of a recently introduced hibernation debug feature to
     it (Rafael Wysocki)"

* tag 'pm-4.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM / hibernate: Fix rtree_next_node() to avoid walking off list ends
  x86/power/64: Use __pa() for physical address computation
  PM / sleep: Update some system sleep documentation

Pull drm fixes from Dave Airlie:
 "Pretty quiet so far:

   - a few amdgpu/radeon fixup for pcie pm changes
   - a couple of amdgpu fixes
   - some build fixes
   - printk fix"

* tag 'drm-fixes-for-4.8-rc3' of git://people.freedesktop.org/~airlied/linux:
  drm/amdgpu: Change GART offset to 64-bit
  drm/mediatek: add ARM_SMCCC dependency
  drm/mediatek: add CONFIG_OF dependency
  drm/mediatek: add COMMON_CLK dependency
  drm/amdgpu: Fix memory trashing if UVD ring test fails
  drm/amdgpu: fix vm init error path
  drm/amdkfd: print doorbell offset as a hex value
  Revert "drm/radeon: work around lack of upstream ACPI support for D3cold"
  Revert "drm/amdgpu: work around lack of upstream ACPI support for D3cold"