- 09 7月, 2019 29 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux由 Linus Torvalds 提交于
Pull selinux updates from Paul Moore: "Like the audit pull request this is a little early due to some upcoming vacation plans and uncertain network access while I'm away. Also like the audit PR, the list of patches here is pretty minor, the highlights include: - Explicitly use __le variables to make sure "sparse" can verify proper byte endian handling. - Remove some BUG_ON()s that are no longer needed. - Allow zero-byte writes to the "keycreate" procfs attribute without requiring key:create to make it easier for userspace to reset the keycreate label. - Consistently log the "invalid_context" field as an untrusted string in the AUDIT_SELINUX_ERR audit records" * tag 'selinux-pr-20190702' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: format all invalid context as untrusted selinux: fix empty write to keycreate file selinux: remove some no-op BUG_ONs selinux: provide __le variables explicitly
-
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit由 Linus Torvalds 提交于
Pull audit updates from Paul Moore: "This pull request is a bit early, but with some vacation time coming up I wanted to send this out now just in case the remote Internet Gods decide not to smile on me once the merge window opens. The patchset for v5.3 is pretty minor this time, the highlights include: - When the audit daemon is sent a signal, ensure we deliver information about the sender even when syscall auditing is not enabled/supported. - Add the ability to filter audit records based on network address family. - Tighten the audit field filtering restrictions on string based fields. - Cleanup the audit field filtering verification code. - Remove a few BUG() calls from the audit code" * tag 'audit-pr-20190702' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: audit: remove the BUG() calls in the audit rule comparison functions audit: enforce op for string fields audit: add saddr_fam filter field audit: re-structure audit field valid checks audit: deliver signal_info regarless of syscall
-
git://git.infradead.org/users/jjs/linux-tpmdd由 Linus Torvalds 提交于
Pull tpm updates from Jarkko Sakkinen: "This contains two critical bug fixes and support for obtaining TPM events triggered by ExitBootServices(). For the latter I have to give a quite verbose explanation not least because I had to revisit all the details myself to remember what was going on in Matthew's patches. The preboot software stack maintains an event log that gets entries every time something gets hashed to any of the PCR registers. What gets hashed could be a component to be run or perhaps log of some actions taken just to give couple of coarse examples. In general, anything relevant for the boot process that the preboot software does gets hashed and a log entry with a specific event type [1]. The main application for this is remote attestation and the reason why it is useful is nicely put in the very first section of [1]: "Attestation is used to provide information about the platform’s state to a challenger. However, PCR contents are difficult to interpret; therefore, attestation is typically more useful when the PCR contents are accompanied by a measurement log. While not trusted on their own, the measurement log contains a richer set of information than do the PCR contents. The PCR contents are used to provide the validation of the measurement log." Because EFI_TCG2_PROTOCOL.GetEventLog() is not available after calling ExitBootServices(), Linux EFI stub copies the event log to a custom configuration table. Unfortunately, ExitBootServices() also generates events and obviously these events do not get copied to that table. Luckily firmware does this for us by providing a configuration table identified by EFI_TCG2_FINAL_EVENTS_TABLE_GUID. This essentially contains necessary changes to provide the full event log for the use the user space that is concatenated from these two partial event logs [2]" [1] https://trustedcomputinggroup.org/resource/pc-client-specific-platform-firmware-profile-specification/ [2] The final concatenation is done in drivers/char/tpm/eventlog/efi.c * tag 'tpmdd-next-20190625' of git://git.infradead.org/users/jjs/linux-tpmdd: tpm: Don't duplicate events from the final event log in the TCG2 log Abstract out support for locating an EFI config table tpm: Fix TPM 1.2 Shutdown sequence to prevent future TPM operations efi: Attempt to get the TCG2 event log in the boot stub tpm: Append the final event log to the TPM event log tpm: Reserve the TPM final events table tpm: Abstract crypto agile event size calculations tpm: Actually fail on TPM errors during "get random"
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 topology updates from Ingo Molnar: "Implement multi-die topology support on Intel CPUs and expose the die topology to user-space tooling, by Len Brown, Kan Liang and Zhang Rui. These changes should have no effect on the kernel's existing understanding of topologies, i.e. there should be no behavioral impact on cache, NUMA, scheduler, perf and other topologies and overall system performance" * 'x86-topology-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel/rapl: Cosmetic rename internal variables in response to multi-die/pkg support perf/x86/intel/uncore: Cosmetic renames in response to multi-die/pkg support hwmon/coretemp: Cosmetic: Rename internal variables to zones from packages thermal/x86_pkg_temp_thermal: Cosmetic: Rename internal variables to zones from packages perf/x86/intel/cstate: Support multi-die/package perf/x86/intel/rapl: Support multi-die/package perf/x86/intel/uncore: Support multi-die/package topology: Create core_cpus and die_cpus sysfs attributes topology: Create package_cpus sysfs attribute hwmon/coretemp: Support multi-die/package powercap/intel_rapl: Update RAPL domain name and debug messages thermal/x86_pkg_temp_thermal: Support multi-die/package powercap/intel_rapl: Support multi-die/package powercap/intel_rapl: Simplify rapl_find_package() x86/topology: Define topology_logical_die_id() x86/topology: Define topology_die_id() cpu/topology: Export die_id x86/topology: Create topology_max_die_per_package() x86/topology: Add CPUID.1F multi-die/package support
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 platform updayes from Ingo Molnar: "Most of the commits add ACRN hypervisor guest support, plus two cleanups" * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/jailhouse: Mark jailhouse_x2apic_available() as __init x86/platform/geode: Drop <linux/gpio.h> includes x86/acrn: Use HYPERVISOR_CALLBACK_VECTOR for ACRN guest upcall vector x86: Add support for Linux guests on an ACRN hypervisor x86/Kconfig: Add new X86_HV_CALLBACK_VECTOR config symbol
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 paravirt updates from Ingo Molnar: "A handful of paravirt patching code enhancements to make it more robust against patching failures, and related cleanups and not so related cleanups - by Thomas Gleixner and myself" * 'x86-paravirt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/paravirt: Rename paravirt_patch_site::instrtype to paravirt_patch_site::type x86/paravirt: Standardize 'insn_buff' variable names x86/paravirt: Match paravirt patchlet field definition ordering to initialization ordering x86/paravirt: Replace the paravirt patch asm magic x86/paravirt: Unify the 32/64 bit paravirt patching code x86/paravirt: Detect over-sized patching bugs in paravirt_patch_call() x86/paravirt: Detect over-sized patching bugs in paravirt_patch_insns() x86/paravirt: Remove bogus extern declarations
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 AVX512 status update from Ingo Molnar: "This adds a new ABI that the main scheduler probably doesn't want to deal with but HPC job schedulers might want to use: the AVX512_elapsed_ms field in the new /proc/<pid>/arch_status task status file, which allows the user-space job scheduler to cluster such tasks, to avoid turbo frequency drops" * 'x86-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Documentation/filesystems/proc.txt: Add arch_status file x86/process: Add AVX-512 usage elapsed time to /proc/pid/arch_status proc: Add /proc/<pid>/arch_status
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 cleanups from Ingo Molnar: "Misc small cleanups: removal of superfluous code and coding style cleanups mostly" * 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/kexec: Make variable static and config dependent x86/defconfigs: Remove useless UEVENT_HELPER_PATH x86/amd_nb: Make hygon_nb_misc_ids static x86/tsc: Move inline keyword to the beginning of function declarations x86/io_delay: Define IO_DELAY macros in C instead of Kconfig x86/io_delay: Break instead of fallthrough in switch statement
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 cache resource control update from Ingo Molnar: "Two cleanup patches" * 'x86-cache-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/resctrl: Cleanup cbm_ensure_valid() x86/resctrl: Use _ASM_BX to avoid ifdeffery
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 build updates from Ingo Molnar: "Two kbuild enhancements by Masahiro Yamada" * 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/build: Remove redundant 'clean-files += capflags.c' x86/build: Add 'set -e' to mkcapflags.sh to delete broken capflags.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 asm updates from Ingo Molnar: "Most of the changes relate to Peter Zijlstra's cleanup of ptregs handling, in particular the i386 part is now much simplified and standardized - no more partial ptregs stack frames via the esp/ss oddity. This simplifies ftrace, kprobes, the unwinder, ptrace, kdump and kgdb. There's also a CR4 hardening enhancements by Kees Cook, to make the generic platform functions such as native_write_cr4() less useful as ROP gadgets that disable SMEP/SMAP. Also protect the WP bit of CR0 against similar attacks. The rest is smaller cleanups/fixes" * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/alternatives: Add int3_emulate_call() selftest x86/stackframe/32: Allow int3_emulate_push() x86/stackframe/32: Provide consistent pt_regs x86/stackframe, x86/ftrace: Add pt_regs frame annotations x86/stackframe, x86/kprobes: Fix frame pointer annotations x86/stackframe: Move ENCODE_FRAME_POINTER to asm/frame.h x86/entry/32: Clean up return from interrupt preemption path x86/asm: Pin sensitive CR0 bits x86/asm: Pin sensitive CR4 bits Documentation/x86: Fix path to entry_32.S x86/asm: Remove unused TASK_TI_flags from asm-offsets.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull scheduler updates from Ingo Molnar: - Remove the unused per rq load array and all its infrastructure, by Dietmar Eggemann. - Add utilization clamping support by Patrick Bellasi. This is a refinement of the energy aware scheduling framework with support for boosting of interactive and capping of background workloads: to make sure critical GUI threads get maximum frequency ASAP, and to make sure background processing doesn't unnecessarily move to cpufreq governor to higher frequencies and less energy efficient CPU modes. - Add the bare minimum of tracepoints required for LISA EAS regression testing, by Qais Yousef - which allows automated testing of various power management features, including energy aware scheduling. - Restructure the former tsk_nr_cpus_allowed() facility that the -rt kernel used to modify the scheduler's CPU affinity logic such as migrate_disable() - introduce the task->cpus_ptr value instead of taking the address of &task->cpus_allowed directly - by Sebastian Andrzej Siewior. - Misc optimizations, fixes, cleanups and small enhancements - see the Git log for details. * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits) sched/uclamp: Add uclamp support to energy_compute() sched/uclamp: Add uclamp_util_with() sched/cpufreq, sched/uclamp: Add clamps for FAIR and RT tasks sched/uclamp: Set default clamps for RT tasks sched/uclamp: Reset uclamp values on RESET_ON_FORK sched/uclamp: Extend sched_setattr() to support utilization clamping sched/core: Allow sched_setattr() to use the current policy sched/uclamp: Add system default clamps sched/uclamp: Enforce last task's UCLAMP_MAX sched/uclamp: Add bucket local max tracking sched/uclamp: Add CPU's clamp buckets refcounting sched/fair: Rename weighted_cpuload() to cpu_runnable_load() sched/debug: Export the newly added tracepoints sched/debug: Add sched_overutilized tracepoint sched/debug: Add new tracepoint to track PELT at se level sched/debug: Add new tracepoints to track PELT at rq level sched/debug: Add a new sched_trace_*() helper functions sched/autogroup: Make autogroup_path() always available sched/wait: Deduplicate code with do-while sched/topology: Remove unused 'sd' parameter from arch_scale_cpu_capacity() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull RAS updates from Ingo Molnar: "Boris is on vacation so I'm sending the RAS bits this time. The main changes were: - Various RAS/CEC improvements and fixes by Borislav Petkov: - error insertion fixes - offlining latency fix - memory leak fix - additional sanity checks - cleanups - debug output improvements - More SMCA enhancements by Yazen Ghannam: - make banks truly per-CPU which they are in the hardware - don't over-cache certain registers - make the number of MCA banks per-CPU variable The long term goal with these changes is to support future heterogenous SMCA extensions. - Misc fixes and improvements" * 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce: Do not check return value of debugfs_create functions x86/MCE: Determine MCA banks' init state properly x86/MCE: Make the number of MCA banks a per-CPU variable x86/MCE/AMD: Don't cache block addresses on SMCA systems x86/MCE: Make mce_banks a per-CPU array x86/MCE: Make struct mce_banks[] static RAS/CEC: Add copyright RAS/CEC: Add CONFIG_RAS_CEC_DEBUG and move CEC debug features there RAS/CEC: Dump the different array element sections RAS/CEC: Rename count_threshold to action_threshold RAS/CEC: Sanity-check array on every insertion RAS/CEC: Fix potential memory leak RAS/CEC: Do not set decay value on error RAS/CEC: Check count_threshold unconditionally RAS/CEC: Fix pfn insertion
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull locking updates from Ingo Molnar: "The main changes in this cycle are: - rwsem scalability improvements, phase #2, by Waiman Long, which are rather impressive: "On a 2-socket 40-core 80-thread Skylake system with 40 reader and writer locking threads, the min/mean/max locking operations done in a 5-second testing window before the patchset were: 40 readers, Iterations Min/Mean/Max = 1,807/1,808/1,810 40 writers, Iterations Min/Mean/Max = 1,807/50,344/151,255 After the patchset, they became: 40 readers, Iterations Min/Mean/Max = 30,057/31,359/32,741 40 writers, Iterations Min/Mean/Max = 94,466/95,845/97,098" There's a lot of changes to the locking implementation that makes it similar to qrwlock, including owner handoff for more fair locking. Another microbenchmark shows how across the spectrum the improvements are: "With a locking microbenchmark running on 5.1 based kernel, the total locking rates (in kops/s) on a 2-socket Skylake system with equal numbers of readers and writers (mixed) before and after this patchset were: # of Threads Before Patch After Patch ------------ ------------ ----------- 2 2,618 4,193 4 1,202 3,726 8 802 3,622 16 729 3,359 32 319 2,826 64 102 2,744" The changes are extensive and the patch-set has been through several iterations addressing various locking workloads. There might be more regressions, but unless they are pathological I believe we want to use this new implementation as the baseline going forward. - jump-label optimizations by Daniel Bristot de Oliveira: the primary motivation was to remove IPI disturbance of isolated RT-workload CPUs, which resulted in the implementation of batched jump-label updates. Beyond the improvement of the real-time characteristics kernel, in one test this patchset improved static key update overhead from 57 msecs to just 1.4 msecs - which is a nice speedup as well. - atomic64_t cross-arch type cleanups by Mark Rutland: over the last ~10 years of atomic64_t existence the various types used by the APIs only had to be self-consistent within each architecture - which means they became wildly inconsistent across architectures. Mark puts and end to this by reworking all the atomic64 implementations to use 's64' as the base type for atomic64_t, and to ensure that this type is consistently used for parameters and return values in the API, avoiding further problems in this area. - A large set of small improvements to lockdep by Yuyang Du: type cleanups, output cleanups, function return type and othr cleanups all around the place. - A set of percpu ops cleanups and fixes by Peter Zijlstra. - Misc other changes - please see the Git log for more details" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (82 commits) locking/lockdep: increase size of counters for lockdep statistics locking/atomics: Use sed(1) instead of non-standard head(1) option locking/lockdep: Move mark_lock() inside CONFIG_TRACE_IRQFLAGS && CONFIG_PROVE_LOCKING x86/jump_label: Make tp_vec_nr static x86/percpu: Optimize raw_cpu_xchg() x86/percpu, sched/fair: Avoid local_clock() x86/percpu, x86/irq: Relax {set,get}_irq_regs() x86/percpu: Relax smp_processor_id() x86/percpu: Differentiate this_cpu_{}() and __this_cpu_{}() locking/rwsem: Guard against making count negative locking/rwsem: Adaptive disabling of reader optimistic spinning locking/rwsem: Enable time-based spinning on reader-owned rwsem locking/rwsem: Make rwsem->owner an atomic_long_t locking/rwsem: Enable readers spinning on writer locking/rwsem: Clarify usage of owner's nonspinaable bit locking/rwsem: Wake up almost all readers in wait queue locking/rwsem: More optimal RT task handling of null owner locking/rwsem: Always release wait_lock before waking up tasks locking/rwsem: Implement lock handoff to prevent lock starvation locking/rwsem: Make rwsem_spin_on_owner() return owner state ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull RCU updates from Ingo Molnar: "The changes in this cycle are: - RCU flavor consolidation cleanups and optmizations - Documentation updates - Miscellaneous fixes - SRCU updates - RCU-sync flavor consolidation - Torture-test updates - Linux-kernel memory-consistency-model updates, most notably the addition of plain C-language accesses" * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (61 commits) tools/memory-model: Improve data-race detection tools/memory-model: Change definition of rcu-fence tools/memory-model: Expand definition of barrier tools/memory-model: Do not use "herd" to refer to "herd7" tools/memory-model: Fix comment in MP+poonceonces.litmus Documentation: atomic_t.txt: Explain ordering provided by smp_mb__{before,after}_atomic() rcu: Don't return a value from rcu_assign_pointer() rcu: Force inlining of rcu_read_lock() rcu: Fix irritating whitespace error in rcu_assign_pointer() rcu: Upgrade sync_exp_work_done() to smp_mb() rcutorture: Upper case solves the case of the vanishing NULL pointer torture: Suppress propagating trace_printk() warning rcutorture: Dump trace buffer for callback pipe drain failures torture: Add --trust-make to suppress "make clean" torture: Make --cpus override idleness calculations torture: Run kernel build in source directory torture: Add function graph-tracing cheat sheet torture: Capture qemu output rcutorture: Tweak kvm options rcutorture: Add trivial RCU implementation ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 pti updates from Thomas Gleixner: "The speculative paranoia departement delivers a few more plugs for possible (probably theoretical) spectre/mds leaks" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/tls: Fix possible spectre-v1 in do_get_thread_area() x86/ptrace: Fix possible spectre-v1 in ptrace_get_debugreg() x86/speculation/mds: Eliminate leaks by trace_hardirqs_on()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 timer updates from Thomas Gleixner: "A rather large series consolidating the HPET code, which was triggered by the attempt to bolt HPET NMI watchdog support on to the existing maze with the usual duct tape and super glue approach. This mainly removes two separate partially redundant storage layers and consolidates them into a single one which provides a consistent view of the different HPET channels and their usage and allows to integrate HPET NMI watchdog support (if it turns out to be feasible) in a non intrusive way" * 'x86-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (29 commits) x86/hpet: Use channel for legacy clockevent storage x86/hpet: Use common init for legacy clockevent x86/hpet: Carve out shareable parts of init_one_hpet_msi_clockevent() x86/hpet: Consolidate clockevent functions x86/hpet: Wrap legacy clockevent in hpet_channel x86/hpet: Use cached info instead of extra flags x86/hpet: Move clockevents into channels x86/hpet: Rename variables to prepare for switching to channels x86/hpet: Add function to select a /dev/hpet channel x86/hpet: Add mode information to struct hpet_channel x86/hpet: Use cached channel data x86/hpet: Introduce struct hpet_base and struct hpet_channel x86/hpet: Coding style cleanup x86/hpet: Clean up comments x86/hpet: Make naming consistent x86/hpet: Remove not required includes x86/hpet: Decapitalize and rename EVT_TO_HPET_DEV x86/hpet: Simplify counter validation x86/hpet: Separate counter check out of clocksource register code x86/hpet: Shuffle code around for readability sake ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 CPU feature updates from Thomas Gleixner: "Updates for x86 CPU features: - Support for UMWAIT/UMONITOR, which allows to use MWAIT and MONITOR instructions in user space to save power e.g. in HPC workloads which spin wait on synchronization points. The maximum time a MWAIT can halt in userspace is controlled by the kernel and can be adjusted by the sysadmin. - Speed up the MTRR handling code on CPUs which support cache self-snooping correctly. On those CPUs the wbinvd() invocations can be omitted which speeds up the MTRR setup by a factor of 50. - Support for the new x86 vendor Zhaoxin who develops processors based on the VIA Centaur technology. - Prevent 'cat /proc/cpuinfo' from affecting isolated NOHZ_FULL CPUs by sending IPIs to retrieve the CPU frequency and use the cached values instead. - The addition and late revert of the FSGSBASE support. The revert was required as it turned out that the code still has hard to diagnose issues. Yet another engineering trainwreck... - Small fixes, cleanups, improvements and the usual new Intel CPU family/model addons" * 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits) x86/fsgsbase: Revert FSGSBASE support selftests/x86/fsgsbase: Fix some test case bugs x86/entry/64: Fix and clean up paranoid_exit x86/entry/64: Don't compile ignore_sysret if 32-bit emulation is enabled selftests/x86: Test SYSCALL and SYSENTER manually with TF set x86/mtrr: Skip cache flushes on CPUs with cache self-snooping x86/cpu/intel: Clear cache self-snoop capability in CPUs with known errata Documentation/ABI: Document umwait control sysfs interfaces x86/umwait: Add sysfs interface to control umwait maximum time x86/umwait: Add sysfs interface to control umwait C0.2 state x86/umwait: Initialize umwait control values x86/cpufeatures: Enumerate user wait instructions x86/cpu: Disable frequency requests via aperfmperf IPI for nohz_full CPUs x86/acpi/cstate: Add Zhaoxin processors support for cache flush policy in C3 ACPI, x86: Add Zhaoxin processors support for NONSTOP TSC x86/cpu: Create Zhaoxin processors architecture support file x86/cpu: Split Tremont based Atoms from the rest Documentation/x86/64: Add documentation for GS/FS addressing mode x86/elf: Enumerate kernel FSGSBASE capability in AT_HWCAP2 x86/cpu: Enable FSGSBASE on 64bit by default and add a chicken bit ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 FPU updates from Thomas Gleixner: "A small set of updates for the FPU code: - Make the no387/nofxsr command line options useful by restricting them to 32bit and actually clearing all dependencies to prevent random crashes and malfunction. - Simplify and cleanup the kernel_fpu_*() helpers" * 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/fpu: Inline fpu__xstate_clear_all_cpu_caps() x86/fpu: Make 'no387' and 'nofxsr' command line options useful x86/fpu: Remove the fpu__save() export x86/fpu: Simplify kernel_fpu_begin() x86/fpu: Simplify kernel_fpu_end()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 vsyscall updates from Thomas Gleixner: "Further hardening of the legacy vsyscall by providing support for execute only mode and switching the default to it. This prevents a certain class of attacks which rely on the vsyscall page being accessible at a fixed address in the canonical kernel address space" * 'x86-entry-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: selftests/x86: Add a test for process_vm_readv() on the vsyscall page x86/vsyscall: Add __ro_after_init to global variables x86/vsyscall: Change the default vsyscall mode to xonly selftests/x86/vsyscall: Verify that vsyscall=none blocks execution x86/vsyscall: Document odd SIGSEGV error code for vsyscalls x86/vsyscall: Show something useful on a read fault x86/vsyscall: Add a new vsyscall=xonly mode Documentation/admin: Remove the vsyscall=native documentation
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x96 apic updates from Thomas Gleixner: "Updates for the x86 APIC interrupt handling and APIC timer: - Fix a long standing issue with spurious interrupts which was caused by the big vector management rework a few years ago. Robert Hodaszi provided finally enough debug data and an excellent initial failure analysis which allowed to understand the underlying issues. This contains a change to the core interrupt management code which is required to handle this correctly for the APIC/IO_APIC. The core changes are NOOPs for most architectures except ARM64. ARM64 is not impacted by the change as confirmed by Marc Zyngier. - Newer systems allow to disable the PIT clock for power saving causing panic in the timer interrupt delivery check of the IO/APIC when the HPET timer is not enabled either. While the clock could be turned on this would cause an endless whack a mole game to chase the proper register in each affected chipset. These systems provide the relevant frequencies for TSC, CPU and the local APIC timer via CPUID and/or MSRs, which allows to avoid the PIT/HPET based calibration. As the calibration code is the only usage of the legacy timers on modern systems and is skipped anyway when the frequencies are known already, there is no point in setting up the PIT and actually checking for the interrupt delivery via IO/APIC. To achieve this on a wide variety of platforms, the CPUID/MSR based frequency readout has been made more robust, which also allowed to remove quite some workarounds which turned out to be not longer required. Thanks to Daniel Drake for analysis, patches and verification" * 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/irq: Seperate unused system vectors from spurious entry again x86/irq: Handle spurious interrupt after shutdown gracefully x86/ioapic: Implement irq_get_irqchip_state() callback genirq: Add optional hardware synchronization for shutdown genirq: Fix misleading synchronize_irq() documentation genirq: Delay deactivation in free_irq() x86/timer: Skip PIT initialization on modern chipsets x86/apic: Use non-atomic operations when possible x86/apic: Make apic_bsp_setup() static x86/tsc: Set LAPIC timer period to crystal clock frequency x86/apic: Rename 'lapic_timer_frequency' to 'lapic_timer_period' x86/tsc: Use CPUID.0x16 to calculate missing crystal frequency
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull timer updates from Thomas Gleixner: "The timer and timekeeping departement delivers: Core: - The consolidation of the VDSO code into a generic library including the conversion of x86 and ARM64. Conversion of ARM and MIPS are en route through the relevant maintainer trees and should end up in 5.4. This gets rid of the unnecessary different copies of the same code and brings all architectures on the same level of VDSO functionality. - Make the NTP user space interface more robust by restricting the TAI offset to prevent undefined behaviour. Includes a selftest. - Validate user input in the compat settimeofday() syscall to catch invalid values which would be turned into valid values by a multiplication overflow - Consolidate the time accessors - Small fixes, improvements and cleanups all over the place Drivers: - Support for the NXP system counter, TI davinci timer - Move the Microsoft HyperV clocksource/events code into the drivers/clocksource directory so it can be shared between x86 and ARM64. - Overhaul of the Tegra driver - Delay timer support for IXP4xx - Small fixes, improvements and cleanups as usual" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (71 commits) time: Validate user input in compat_settimeofday() timer: Document TIMER_PINNED clocksource/drivers: Continue making Hyper-V clocksource ISA agnostic clocksource/drivers: Make Hyper-V clocksource ISA agnostic MAINTAINERS: Fix Andy's surname and the directory entries of VDSO hrtimer: Use a bullet for the returns bullet list arm64: vdso: Fix compilation with clang older than 8 arm64: compat: Fix __arch_get_hw_counter() implementation arm64: Fix __arch_get_hw_counter() implementation lib/vdso: Make delta calculation work correctly MAINTAINERS: Add entry for the generic VDSO library arm64: compat: No need for pre-ARMv7 barriers on an ARMv8 system arm64: vdso: Remove unnecessary asm-offsets.c definitions vdso: Remove superfluous #ifdef __KERNEL__ in vdso/datapage.h clocksource/drivers/davinci: Add support for clocksource clocksource/drivers/davinci: Add support for clockevents clocksource/drivers/tegra: Set up maximum-ticks limit properly clocksource/drivers/tegra: Cycles can't be 0 clocksource/drivers/tegra: Restore base address before cleanup clocksource/drivers/tegra: Add verbose definition for 1MHz constant ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull irq updates from Thomas Gleixner: "The irq departement provides the usual mixed bag: Core: - Further improvements to the irq timings code which aims to predict the next interrupt for power state selection to achieve better latency/power balance - Add interrupt statistics to the core NMI handlers - The usual small fixes and cleanups Drivers: - Support for Renesas RZ/A1, Annapurna Labs FIC, Meson-G12A SoC and Amazon Gravition AMR/GIC interrupt controllers. - Rework of the Renesas INTC controller driver - ACPI support for Socionext SoCs - Enhancements to the CSKY interrupt controller - The usual small fixes and cleanups" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits) irq/irqdomain: Fix comment typo genirq: Update irq stats from NMI handlers irqchip/gic-pm: Remove PM_CLK dependency irqchip/al-fic: Introduce Amazon's Annapurna Labs Fabric Interrupt Controller Driver dt-bindings: interrupt-controller: Add Amazon's Annapurna Labs FIC softirq: Use __this_cpu_write() in takeover_tasklets() irqchip/mbigen: Stop printing kernel addresses irqchip/gic: Add dependency for ARM_GIC_MAX_NR genirq/affinity: Remove unused argument from [__]irq_build_affinity_masks() genirq/timings: Add selftest for next event computation genirq/timings: Add selftest for irqs circular buffer genirq/timings: Add selftest for circular array genirq/timings: Encapsulate storing function genirq/timings: Encapsulate timings push genirq/timings: Optimize the period detection speed genirq/timings: Fix timings buffer inspection genirq/timings: Fix next event index function irqchip/qcom: Use struct_size() in devm_kzalloc() irqchip/irq-csky-mpintc: Remove unnecessary loop in interrupt handler dt-bindings: interrupt-controller: Update csky mpintc ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull SMP/hotplug updates from Thomas Gleixner: "A small set of updates for SMP and CPU hotplug: - Abort disabling secondary CPUs in the freezer when a wakeup is pending instead of evaluating it only after all CPUs have been offlined. - Remove the shared annotation for the strict per CPU cfd_data in the smp function call core code. - Remove the return values of smp_call_function() and on_each_cpu() as they are unconditionally 0. Fixup the few callers which actually bothered to check the return value" * 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: smp: Remove smp_call_function() and on_each_cpu() return values smp: Do not mark call_function_data as shared cpu/hotplug: Abort disabling secondary CPUs if wakeup is pending cpu/hotplug: Fix notify_cpu_starting() reference in bringup_wait_for_ap()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull Reed-Solomon library updates from Thomas Gleixner: "A cleanup and fixes series from Ferdinand Blomqvist who analyzed the original Reed-Solomon library from Phil Karn on which the kernel implementation is based on. This comes with a test module which verifies all the various corner cases for correctness" * 'core-rslib-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rslib: Make some functions static rslib: Fix remaining decoder flaws rslib: Update documentation rslib: Fix handling of of caller provided syndrome rslib: decode_rs: Code cleanup rslib: decode_rs: Fix length parameter check rslib: Fix decoding of shortened codes rslib: Add tests for the encoder and decoder
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull debugobjects updates from Thomas Gleixner: "A set of updates for debugobjects: - A series of changes to make debugobjects more scalable by introducing per cpu pools and reducing the number of lock acquisitions - debugfs cleanup" * 'core-debugobjects-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: debugobjects: Move printk out of db->lock critical sections debugobjects: Less aggressive freeing of excess debug objects debugobjects: Reduce number of pool_lock acquisitions in fill_pool() debugobjects: Percpu pool lookahead freeing/allocation debugobjects: Add percpu free pools debugobjects: No need to check return value of debugfs_create()
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux由 Linus Torvalds 提交于
Pull s390 updates from Vasily Gorbik: - Improve stop_machine wait logic: replace cpu_relax_yield call in generic stop_machine function with a weak stop_machine_yield function. This is overridden on s390, which yields the current cpu to the neighbouring cpu after a couple of retries, instead of blindly giving up the cpu to the hipervisor. This significantly improves stop_machine performance on s390 in overcommitted scenarios. This includes common code changes which have been Acked by Peter Zijlstra and Thomas Gleixner. - Improve jump label transformation speed: transform jump labels without using stop_machine. - Refactoring of the vfio-ccw cp handling, simplifying the code and avoiding unneeded allocating/copying. - Various vfio-ccw fixes (ccw translation, state machine). - Add support for vfio-ap queue interrupt control in the guest. This includes s390 kvm changes which have been Acked by Christian Borntraeger. - Add protected virtualization support for virtio-ccw. - Enforce both CONFIG_SMP and CONFIG_HOTPLUG_CPU, which allows to remove some code which most likely isn't working at all, besides that s390 didn't even compile for !CONFIG_SMP. - Support for special flagged EP11 CPRBs for zcrypt. - Handle PCI devices with no support for new MIO instructions. - Avoid KASAN false positives in reworked stack unwinder. - Couple of fixes for the QDIO layer. - Convert s390 specific documentation to ReST format. - Let s390 crypto modules return -ENODEV instead of -EOPNOTSUPP if hardware is missing. This way our modules behave like most other modules and which is also what systemd's systemd-modules-load.service expects. - Replace defconfig with performance_defconfig, so there is one config file less to maintain. - Remove the SCLP call home device driver, which was never useful. - Cleanups all over the place. * tag 's390-5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (83 commits) docs: s390: s390dbf: typos and formatting, update crash command docs: s390: unify and update s390dbf kdocs at debug.c docs: s390: restore important non-kdoc parts of s390dbf.rst vfio-ccw: Fix the conversion of Format-0 CCWs to Format-1 s390/pci: correctly handle MIO opt-out s390/pci: deal with devices that have no support for MIO instructions s390: ap: kvm: Enable PQAP/AQIC facility for the guest s390: ap: implement PAPQ AQIC interception in kernel vfio: ap: register IOMMU VFIO notifier s390: ap: kvm: add PQAP interception for AQIC s390/unwind: cleanup unused READ_ONCE_TASK_STACK s390/kasan: avoid false positives during stack unwind s390/qdio: don't touch the dsci in tiqdio_add_input_queues() s390/qdio: (re-)initialize tiqdio list entries s390/dasd: Fix a precision vs width bug in dasd_feature_list() s390/cio: introduce driver_override on the css bus vfio-ccw: make convert_ccw0_to_ccw1 static vfio-ccw: Remove copy_ccw_from_iova() vfio-ccw: Factor out the ccw0-to-ccw1 transition vfio-ccw: Copy CCW data outside length calculation ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k由 Linus Torvalds 提交于
Pull m68k updates from Geert Uytterhoeven: - switch to using the generic remapping DMA allocator - defconfig updates * tag 'm68k-for-v5.3-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Implement arch_dma_prep_coherent() m68k: Use the generic dma coherent remap allocator m68k: defconfig: Update defconfigs for v5.2-rc1
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux由 Linus Torvalds 提交于
Pull arm64 updates from Catalin Marinas: - arm64 support for syscall emulation via PTRACE_SYSEMU{,_SINGLESTEP} - Wire up VM_FLUSH_RESET_PERMS for arm64, allowing the core code to manage the permissions of executable vmalloc regions more strictly - Slight performance improvement by keeping softirqs enabled while touching the FPSIMD/SVE state (kernel_neon_begin/end) - Expose a couple of ARMv8.5 features to user (HWCAP): CondM (new XAFLAG and AXFLAG instructions for floating point comparison flags manipulation) and FRINT (rounding floating point numbers to integers) - Re-instate ARM64_PSEUDO_NMI support which was previously marked as BROKEN due to some bugs (now fixed) - Improve parking of stopped CPUs and implement an arm64-specific panic_smp_self_stop() to avoid warning on not being able to stop secondary CPUs during panic - perf: enable the ARM Statistical Profiling Extensions (SPE) on ACPI platforms - perf: DDR performance monitor support for iMX8QXP - cache_line_size() can now be set from DT or ACPI/PPTT if provided to cope with a system cache info not exposed via the CPUID registers - Avoid warning on hardware cache line size greater than ARCH_DMA_MINALIGN if the system is fully coherent - arm64 do_page_fault() and hugetlb cleanups - Refactor set_pte_at() to avoid redundant READ_ONCE(*ptep) - Ignore ACPI 5.1 FADTs reported as 5.0 (infer from the 'arm_boot_flags' introduced in 5.1) - CONFIG_RANDOMIZE_BASE now enabled in defconfig - Allow the selection of ARM64_MODULE_PLTS, currently only done via RANDOMIZE_BASE (and an erratum workaround), allowing modules to spill over into the vmalloc area - Make ZONE_DMA32 configurable * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (54 commits) perf: arm_spe: Enable ACPI/Platform automatic module loading arm_pmu: acpi: spe: Add initial MADT/SPE probing ACPI/PPTT: Add function to return ACPI 6.3 Identical tokens ACPI/PPTT: Modify node flag detection to find last IDENTICAL x86/entry: Simplify _TIF_SYSCALL_EMU handling arm64: rename dump_instr as dump_kernel_instr arm64/mm: Drop [PTE|PMD]_TYPE_FAULT arm64: Implement panic_smp_self_stop() arm64: Improve parking of stopped CPUs arm64: Expose FRINT capabilities to userspace arm64: Expose ARMv8.5 CondM capability to userspace arm64: defconfig: enable CONFIG_RANDOMIZE_BASE arm64: ARM64_MODULES_PLTS must depend on MODULES arm64: bpf: do not allocate executable memory arm64/kprobes: set VM_FLUSH_RESET_PERMS on kprobe instruction pages arm64/mm: wire up CONFIG_ARCH_HAS_SET_DIRECT_MAP arm64: module: create module allocations without exec permissions arm64: Allow user selection of ARM64_MODULE_PLTS acpi/arm64: ignore 5.1 FADTs that are reported as 5.0 arm64: Allow selecting Pseudo-NMI again ...
-
- 08 7月, 2019 1 次提交
-
-
由 Linus Torvalds 提交于
-
- 07 7月, 2019 10 次提交
-
-
由 zhengbin 提交于
The user value is validated after converting the timeval to a timespec, but for a wide range of negative tv_usec values the multiplication overflow turns them in positive numbers. So the 'validated later' is not catching the invalid input. Signed-off-by: Nzhengbin <zhengbin13@huawei.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/1562460701-113301-1-git-send-email-zhengbin13@huawei.com
-
All fpu__xstate_clear_all_cpu_caps() does is to invoke one simple function since commit 73e3a7d2 ("x86/fpu: Remove the explicit clearing of XSAVE dependent features") so invoke that function directly and remove the wrapper. Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190704060743.rvew4yrjd6n33uzx@linutronix.de
-
The command line option `no387' is designed to disable the FPU entirely. This only 'works' with CONFIG_MATH_EMULATION enabled. But on 64bit this cannot work because user space expects SSE to work which required basic FPU support. MATH_EMULATION does not help because SSE is not emulated. The command line option `nofxsr' should also be limited to 32bit because FXSR is part of the required flags on 64bit so turning it off is not possible. Clearing X86_FEATURE_FPU without emulation enabled will not work anyway and hang in fpu__init_system_early_generic() before the console is enabled. Setting additioal dependencies, ensures that the CPU still boots on a modern CPU. Otherwise, dropping FPU will leave FXSR enabled causing the kernel to crash early in fpu__init_system_mxcsr(). With XSAVE support it will crash in fpu__init_cpu_xstate(). The problem is that xsetbv() with XMM set and SSE cleared is not allowed. That means XSAVE has to be disabled. The XSAVE support is disabled in fpu__init_system_xstate_size_legacy() but it is too late. It can be removed, it has been added in commit 1f999ab5 ("x86, xsave: Disable xsave in i387 emulation mode") to use `no387' on a CPU with XSAVE support. All this happens before console output. After hat, the next possible crash is in RAID6 detect code because MMX remained enabled. With a 3DNOW enabled config it will explode in memcpy() for instance due to kernel_fpu_begin() but this is unconditionally enabled. This is enough to boot a Debian Wheezy on a 32bit qemu "host" CPU which supports everything up to XSAVES, AVX2 without 3DNOW. Later, Debian increased the minimum requirements to i686 which means it does not boot userland atleast due to CMOV. After masking the additional features it still keeps SSE4A and 3DNOW* enabled (if present on the host) but those are unused in the kernel. Restrict `no387' and `nofxsr' otions to 32bit only. Add dependencies for FPU, FXSR to additionaly mask CMOV, MMX, XSAVE if FXSR or FPU is cleared. Reported-by: NVegard Nossum <vegard.nossum@oracle.com> Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190703083247.57kjrmlxkai3vpw3@linutronix.de
-
由 Peter Xu 提交于
The flag hints the user that the pinned timers will always be run on a static CPU (because that should be what "pinned" means...) but that's not the truth, at least with the current implementation. For example, currently if a pinned timer is set up but later mod_timer() upon the pinned timer is invoked, mod_timer() will still try to queue the timer on the current processor and migrate the timer if necessary. Document it a bit with the definition of TIMER_PINNED so that all future users will use it correctly. Signed-off-by: NPeter Xu <peterx@redhat.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Luiz Capitulino <lcapitulino@redhat.com> Link: https://lkml.kernel.org/r/20190628105942.14131-1-peterx@redhat.com
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull block fix from Jens Axboe: "Just a single fix for a patch from Greg KH, which reportedly break block debugfs locations for certain setups. Trivial enough that I think we should include it now, rather than wait and release 5.2 with it, since it's a regression in this series" * tag 'for-linus-20190706' of git://git.kernel.dk/linux-block: blk-mq: fix up placement of debugfs directory of queue files
-
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux由 Linus Torvalds 提交于
Pull MIPS fixes from Paul Burton: "A few more MIPS fixes: - Fix a silly typo in virt_addr_valid which led to completely bogus behavior (that happened to stop tripping up hardened usercopy despite being broken). - Fix UART parity setup on AR933x systems. - A build fix for non-Linux build machines. - Have the 'all' make target build DTBs, primarily to fit in with the behavior of scripts/package/builddeb. - Handle an execution hazard in TLB exceptions that use KScratch registers, which could inadvertently clobber the $1 register on some generally higher-end out-of-order CPUs. - A MAINTAINERS update to fix the path to the NAND driver for Ingenic systems" * tag 'mips_fixes_5.2_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MAINTAINERS: Correct path to moved files MIPS: Add missing EHB in mtc0 -> mfc0 sequence. MIPS: have "plain" make calls build dtbs for selected platforms MIPS: fix build on non-linux hosts MIPS: ath79: fix ar933x uart parity mode MIPS: Fix bounds check virt_addr_valid
-
git://git.infradead.org/users/vkoul/slave-dma由 Linus Torvalds 提交于
Pull dmaengine fixes from Vinod Koul: - bam_dma fix for completed descriptor count - fix for imx-sdma remove BD_INTR for channel0 and use-after-free on probe error path - endian bug fix in jz4780 IRQ handler * tag 'dmaengine-fix-5.2' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: qcom: bam_dma: Fix completed descriptors count dmaengine: imx-sdma: remove BD_INTR for channel0 dmaengine: imx-sdma: fix use-after-free on probe error path dmaengine: jz4780: Fix an endian bug in IRQ handler
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi由 Linus Torvalds 提交于
Pull SCSI fixes from James Bottomley: "Two iscsi fixes. One for an oops in the client which can be triggered by the server authentication protocol and the other in the target code which causes data corruption" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: iscsi: set auth_protocol back to NULL if CHAP_A value is not supported scsi: target/iblock: Fix overrun in WRITE SAME emulation
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull vfs fixlet from Al Viro: "Fix bogus default y in Kconfig (VALIDATE_FS_PARSER) That thing should not be turned on by default, especially since it's not quiet in case it finds no problems. Geert has sent the obvious fix quite a few times, but it fell through the cracks" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: VALIDATE_FS_PARSER should default to n
-
由 Greg Kroah-Hartman 提交于
When the blk-mq debugfs file creation logic was "cleaned up" it was cleaned up too much, causing the queue file to not be created in the correct location. Turns out the check for the directory being present is needed as if that has not happened yet, the files should not be created, and the function will be called later on in the initialization code so that the files can be created in the correct location. Fixes: 6cfc0081 ("blk-mq: no need to check return value of debugfs_create functions") Reported-by: NStephen Rothwell <sfr@canb.auug.org.au> Cc: linux-block@vger.kernel.org Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-