- 06 3月, 2015 7 次提交
-
-
由 Rafael J. Wysocki 提交于
* irq-pm: genirq / PM: describe IRQF_COND_SUSPEND tty: serial: atmel: rework interrupt and wakeup handling watchdog: at91sam9: request the irq with IRQF_NO_SUSPEND clk: at91: implement suspend/resume for the PMC irqchip rtc: at91rm9200: rework wakeup and interrupt handling rtc: at91sam9: rework wakeup and interrupt handling PM / wakeup: export pm_system_wakeup symbol genirq / PM: Add flag for shared NO_SUSPEND interrupt lines genirq / PM: better describe IRQF_NO_SUSPEND semantics
-
由 Mark Rutland 提交于
With certain restrictions it is possible for a wakeup device to share an IRQ with an IRQF_NO_SUSPEND user, and the warnings introduced by commit cab303be are spurious. The new IRQF_COND_SUSPEND flag allows drivers to tell the core when these restrictions are met, allowing spurious warnings to be silenced. This patch documents how IRQF_COND_SUSPEND is expected to be used, updating some of the text now made invalid by its addition. Signed-off-by: NMark Rutland <mark.rutland@arm.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Boris BREZILLON 提交于
The IRQ line connected to the DBGU UART is often shared with a timer device which request the IRQ with IRQF_NO_SUSPEND. Since the UART driver is correctly disabling IRQs when entering suspend we can safely request the IRQ with IRQF_COND_SUSPEND so that irq core will not complain about mixing IRQF_NO_SUSPEND and !IRQF_NO_SUSPEND. Rework the interrupt handler to wake the system up when an interrupt happens on the DEBUG_UART while the system is suspended. Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com> Acked-by: NMark Rutland <mark.rutland@arm.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Boris BREZILLON 提交于
The watchdog interrupt (only used when activating software watchdog) shouldn't be suspended when entering suspend mode, because it is shared with a timer device (which request the line with IRQF_NO_SUSPEND) and once the watchdog "Mode Register" has been written, it cannot be changed (which means we cannot disable the watchdog interrupt when entering suspend). Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: NGuenter Roeck <linux@roeck-us.net> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Rafael J. Wysocki 提交于
* suspend-to-idle: cpuidle / sleep: Use broadcast timer for states that stop local timer cpuidle: Clean up fallback handling in cpuidle_idle_call() cpuidle / sleep: Do sanity checks in cpuidle_enter_freeze() too idle / sleep: Avoid excessive disabling and enabling interrupts
-
由 Rafael J. Wysocki 提交于
* acpi-resources: x86/PCI/ACPI: Relax ACPI resource descriptor checks to work around BIOS bugs x86/PCI/ACPI: Ignore resources consumed by host bridge itself PCI: versatile: Update for list_for_each_entry() API change
-
由 Rafael J. Wysocki 提交于
Commit 38106313 (PM / sleep: Re-implement suspend-to-idle handling) overlooked the fact that entering some sufficiently deep idle states by CPUs may cause their local timers to stop and in those cases it is necessary to switch over to a broadcast timer prior to entering the idle state. If the cpuidle driver in use does not provide the new ->enter_freeze callback for any of the idle states, that problem affects suspend-to-idle too, but it is not taken into account after the changes made by commit 38106313. Fix that by changing the definition of cpuidle_enter_freeze() and re-arranging of the code in cpuidle_idle_call(), so the former does not call cpuidle_enter() any more and the fallback case is handled by cpuidle_idle_call() directly. Fixes: 38106313 (PM / sleep: Re-implement suspend-to-idle handling) Reported-and-tested-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
-
- 05 3月, 2015 5 次提交
-
-
由 Boris BREZILLON 提交于
The irq line used by the PMC block is shared with several peripherals including the init timer which is registering its handler with IRQF_NO_SUSPEND. Implement the appropriate suspend/resume callback for the PMC irqchip, and inform irq core that PMC irq handler can be safely called while the system is suspended by setting IRQF_COND_SUSPEND. Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com> Acked-by: NMark Rutland <mark.rutland@arm.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Boris BREZILLON 提交于
The IRQ line used by the RTC device is usually shared with the system timer (PIT) on at91 platforms. Since timers are registering their handlers with IRQF_NO_SUSPEND, we should expect being called in suspended state, and properly wake the system up when this is the case. Set IRQF_COND_SUSPEND flag when registering the IRQ handler to inform irq core that it can safely be called while the system is suspended. Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com> Acked-by: NMark Rutland <mark.rutland@arm.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Boris BREZILLON 提交于
The IRQ line used by the RTC device is usually shared with the system timer (PIT) on at91 platforms. Since timers are registering their handlers with IRQF_NO_SUSPEND, we should expect being called in suspended state, and properly wake the system up when this is the case. Set IRQF_COND_SUSPEND flag when registering the IRQ handler to inform irq core that it can safely be called while the system is suspended. Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com> Acked-by: NMark Rutland <mark.rutland@arm.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Boris BREZILLON 提交于
Export pm_system_wakeup function to allow irq handlers to deal with system wakeup. This is needed for shared IRQ lines where one of the handler is registered with IRQF_NO_SUSPEND, while the other ones want to configure it as a wakeup source. In this specific case, irq core does not handle the wakeup process and leave the decision to each irq handler. Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com> Acked-by: NMark Rutland <mark.rutland@arm.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Rafael J. Wysocki 提交于
It currently is required that all users of NO_SUSPEND interrupt lines pass the IRQF_NO_SUSPEND flag when requesting the IRQ or the WARN_ON_ONCE() in irq_pm_install_action() will trigger. That is done to warn about situations in which unprepared interrupt handlers may be run unnecessarily for suspended devices and may attempt to access those devices by mistake. However, it may cause drivers that have no technical reasons for using IRQF_NO_SUSPEND to set that flag just because they happen to share the interrupt line with something like a timer. Moreover, the generic handling of wakeup interrupts introduced by commit 9ce7a258 (genirq: Simplify wakeup mechanism) only works for IRQs without any NO_SUSPEND users, so the drivers of wakeup devices needing to use shared NO_SUSPEND interrupt lines for signaling system wakeup generally have to detect wakeup in their interrupt handlers. Thus if they happen to share an interrupt line with a NO_SUSPEND user, they also need to request that their interrupt handlers be run after suspend_device_irqs(). In both cases the reason for using IRQF_NO_SUSPEND is not because the driver in question has a genuine need to run its interrupt handler after suspend_device_irqs(), but because it happens to share the line with some other NO_SUSPEND user. Otherwise, the driver would do without IRQF_NO_SUSPEND just fine. To make it possible to specify that condition explicitly, introduce a new IRQ action handler flag for shared IRQs, IRQF_COND_SUSPEND, that, when set, will indicate to the IRQ core that the interrupt user is generally fine with suspending the IRQ, but it also can tolerate handler invocations after suspend_device_irqs() and, in particular, it is capable of detecting system wakeup and triggering it as appropriate from its interrupt handler. That will allow us to work around a problem with a shared timer interrupt line on at91 platforms. Link: http://marc.info/?l=linux-kernel&m=142252777602084&w=2 Link: http://marc.info/?t=142252775300011&r=1&w=2 Link: https://lkml.org/lkml/2014/12/15/552Reported-by: NBoris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Acked-by: NMark Rutland <mark.rutland@arm.com>
-
- 04 3月, 2015 4 次提交
-
-
由 Jiang Liu 提交于
Some BIOSes report incorrect length for ACPI address space descriptors, so relax the checks to avoid regressions. This issue has appeared several times as: 3162b6f0 ("PNPACPI: truncate _CRS windows with _LEN > _MAX - _MIN + 1") d558b483 ("x86/PCI: truncate _CRS windows with _LEN > _MAX - _MIN + 1") f238b414 ("PNPACPI: compute Address Space length rather than using _LEN") 48728e07 ("x86/PCI: compute Address Space length rather than using _LEN") Please refer to https://bugzilla.kernel.org/show_bug.cgi?id=94221 for more details and example malformed ACPI resource descriptors. Link: https://bugzilla.kernel.org/show_bug.cgi?id=94221 Fixes: 593669c2 (x86/PCI/ACPI: Use common ACPI resource interfaces ...) Signed-off-by: NJiang Liu <jiang.liu@linux.intel.com> Tested-by: NDave Airlie <airlied@redhat.com> Tested-by: NPrakash Punnoor <prakash@punnoor.de> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Jiang Liu 提交于
When parsing resources for PCI host bridge, we should ignore resources consumed by host bridge itself and only report window resources available to child PCI busses. Fixes: 593669c2 (x86/PCI/ACPI: Use common ACPI resource interfaces ...) Signed-off-by: NJiang Liu <jiang.liu@linux.intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Linus Torvalds 提交于
-
由 Daniel Vetter 提交于
This is a tricky story of the new atomic state handling and the legacy code fighting over each another. The bug at hand is an underrun of the framebuffer reference with subsequent hilarity caused by the load detect code. Which is peculiar since the the exact same code works fine as the implementation of the legacy setcrtc ioctl. Let's look at the ingredients: - Currently our code is a crazy mix of legacy modeset interfaces to set the parameters and half-baked atomic state tracking underneath. While this transition is going we're using the transitional plane helpers to update the atomic side (drm_plane_helper_disable/update and friends), i.e. plane->state->fb. Since the state structure owns the fb those functions take care of that themselves. The legacy state (specifically crtc->primary->fb) is still managed by the old code (and mostly by the drm core), with the fb reference counting done by callers (core drm for the ioctl or the i915 load detect code). The relevant commit is commit ea2c67bb Author: Matt Roper <matthew.d.roper@intel.com> Date: Tue Dec 23 10:41:52 2014 -0800 drm/i915: Move to atomic plane helpers (v9) - drm_plane_helper_disable has special code to handle multiple calls in a row - it checks plane->crtc == NULL and bails out. This is to match the proper atomic implementation which needs the crtc to get at the implied locking context atomic updates always need. See commit acf24a39 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Jul 29 15:33:05 2014 +0200 drm/plane-helper: transitional atomic plane helpers - The universal plane code split out the implicit primary plane from the CRTC into it's own full-blown drm_plane object. As part of that the setcrtc ioctl (which updated both the crtc mode and primary plane) learned to set crtc->primary->crtc on modeset to make sure the plane->crtc assignments statate up to date in commit e13161af Author: Matt Roper <matthew.d.roper@intel.com> Date: Tue Apr 1 15:22:38 2014 -0700 drm: Add drm_crtc_init_with_planes() (v2) Unfortunately we've forgotten to update the load detect code. Which wasn't a problem since the load detect modeset is temporary and always undone before we drop the locks. - Finally there is a organically grown history (i.e. don't ask) around who sets the legacy plane->fb for the various driver entry points. Originally updating that was the drivers duty, but for almost all places we've moved that (plus updating the refcounts) into the core. Again the exception is the load detect code. Taking all together the following happens: - The load detect code doesn't set crtc->primary->crtc. This is only really an issue on crtcs never before used or when userspace explicitly disabled the primary plane. - The plane helper glue code short-circuits because of that and leaves a non-NULL fb behind in plane->state->fb and plane->fb. The state fb isn't a real problem (it's properly refcounted on its own), it's just the canary. - Load detect code drops the reference for that fb, but doesn't set plane->fb = NULL. This is ok since it's still living in that old world where drivers had to clear the pointer but the core/callers handled the refcounting. - On the next modeset the drm core notices plane->fb and takes care of refcounting it properly by doing another unref. This drops the refcount to zero, leaving state->plane now pointing at freed memory. - intel_plane_duplicate_state still assume it owns a reference to that very state->fb and bad things start to happen. Fix this all by applying the same duct-tape as for the legacy setcrtc ioctl code and set crtc->primary->crtc properly. Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Paul Bolle <pebolle@tiscali.nl> Cc: Rob Clark <robdclark@gmail.com> Cc: Paulo Zanoni <przanoni@gmail.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Matt Roper <matthew.d.roper@intel.com> Reported-and-tested-by: NLinus Torvalds <torvalds@linux-foundation.org> Reported-by: NPaul Bolle <pebolle@tiscali.nl> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 03 3月, 2015 5 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio由 Linus Torvalds 提交于
Pull GPIO fixes from Linus Walleij: "Two GPIO fixes: - Fix a translation problem in of_get_named_gpiod_flags() - Fix a long standing container_of() mistake in the TPS65912 driver" * tag 'gpio-v4.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: tps65912: fix wrong container_of arguments gpiolib: of: allow of_gpiochip_find_and_xlate to find more than one chip per node
-
由 Linus Torvalds 提交于
Merge branch 'fixes-for-4.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal Pull thermal management fixes from Eduardo Valentin: "Specifics: - Several fixes in tmon tool. - Fixes in intel int340x for _ART and _TRT tables. - Add id for Avoton SoC into powerclamp driver. - Fixes in RCAR thermal driver to remove race conditions and fix fail path - Fixes in TI thermal driver: removal of unnecessary code and build fix if !CONFIG_PM_SLEEP - Cleanups in exynos thermal driver - Add stubs for include/linux/thermal.h. Now drivers using thermal calls but that also work without CONFIG_THERMAL will be able to compile for systems that don't care about thermal. Note: I am sending this pull on Rui's behalf while he fixes issues in his Linux box" * 'fixes-for-4.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: thermal: int340x_thermal: Ignore missing _ART, _TRT tables thermal/intel_powerclamp: add id for Avoton SoC tools/thermal: tmon: silence 'set but not used' warnings tools/thermal: tmon: use pkg-config to determine library dependencies tools/thermal: tmon: support cross-compiling tools/thermal: tmon: add .gitignore tools/thermal: tmon: fixup tui windowing calculations tools/thermal: tmon: tui: don't hard-code dialog window size assumptions tools/thermal: tmon: add min/max macros tools/thermal: tmon: add --target-temp parameter thermal: exynos: Clean-up code to use oneline entry for exynos compatible table thermal: rcar: Make error and remove paths symmetrical with init thermal: rcar: Fix race condition between init and interrupt thermal: Introduce dummy functions when thermal is not defined ti-soc-thermal: Delete an unnecessary check before the function call "cpufreq_cooling_unregister" thermal: ti-soc-thermal: bandgap: Fix build warning if !CONFIG_PM_SLEEP
-
git://neil.brown.name/md由 Linus Torvalds 提交于
Pull md fixes from Neil Brown: "Three md fixes: - fix a read-balance problem that was reported 2 years ago, but that I never noticed the report :-( - fix for rare RAID6 problem causing incorrect bitmap updates when two devices fail. - add __ATTR_PREALLOC annotation now that it is possible" * tag 'md/4.0-fixes' of git://neil.brown.name/md: md: mark some attributes as pre-alloc raid5: check faulty flag for array status during recovery. md/raid1: fix read balance when a drive is write-mostly.
-
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag由 Linus Torvalds 提交于
Pull arch/metag fix from James Hogan: "This is just a single patch to fix the KSTK_EIP() and KSTK_ESP() macros for metag which have always been erronously returning the PC and stack pointer of the task's kernel context rather than from its user context saved at entry from userland into the kernel, which affects the contents of /proc/<pid>/maps and /proc/<pid>/stat" * tag 'metag-fixes-v4.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag: metag: Fix KSTK_EIP() and KSTK_ESP() macros
-
由 Rafael J. Wysocki 提交于
Move the fallback code path in cpuidle_idle_call() to the end of the function to avoid jumping to a label in an if () branch. Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 02 3月, 2015 5 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Ingo Molnar: "A CR4-shadow 32-bit init fix, plus two typo fixes" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Init per-cpu shadow copy of CR4 on 32-bit CPUs too x86/platform/intel-mid: Fix trivial printk message typo in intel_mid_arch_setup() x86/cpu/intel: Fix trivial typo in intel_tlb_table[]
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull timer fixes from Ingo Molnar: "Three clockevents/clocksource driver fixes" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource: pxa: Fix section mismatch clocksource: mtk: Fix race conditions in probe code clockevents: asm9260: Fix compilation error with sparc/sparc64 allyesconfig
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf fixes from Ingo Molnar: "Two kprobes fixes and a handful of tooling fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf tools: Make sparc64 arch point to sparc perf symbols: Define EM_AARCH64 for older OSes perf top: Fix SIGBUS on sparc64 perf tools: Fix probing for PERF_FLAG_FD_CLOEXEC flag perf tools: Fix pthread_attr_setaffinity_np build error perf tools: Define _GNU_SOURCE on pthread_attr_setaffinity_np feature check perf bench: Fix order of arguments to memcpy_alloc_mem kprobes/x86: Check for invalid ftrace location in __recover_probed_insn() kprobes/x86: Use 5-byte NOP when the code might be modified by ftrace
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull locking fix from Ingo Molnar: "An rtmutex deadlock path fixlet" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/rtmutex: Set state back to running on error
-
由 Ingo Molnar 提交于
Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: - pthread_attr_setaffinity_np() feature detection build fixes (Adrian Hunter, Josh Boyer) - Fix probing for PERF_FLAG_FD_CLOEXEC flag (Adrian Hunter) - Fix order of arguments to memcpy_alloc_mem in 'perf bench' (Bruce Merry) - Sparc64 and Aarch64 build and segfault fixes (David Ahern) Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
- 01 3月, 2015 14 次提交
-
-
The "usual" path is: - rt_mutex_slowlock() - set_current_state() - task_blocks_on_rt_mutex() (ret 0) - __rt_mutex_slowlock() - sleep or not but do return with __set_current_state(TASK_RUNNING) - back to caller. In the early error case where task_blocks_on_rt_mutex() return -EDEADLK we never change the task's state back to RUNNING. I assume this is intended. Without this change after ww_mutex using rt_mutex the selftest passes but later I get plenty of: | bad: scheduling from the idle thread! backtraces. Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: NMike Galbraith <umgwanakikbuti@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: afffc6c1 ("locking/rtmutex: Optimize setting task running after being blocked") Link: http://lkml.kernel.org/r/1425056229-22326-4-git-send-email-bigeasy@linutronix.deSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Rafael J. Wysocki 提交于
Modify cpuidle_enter_freeze() to do the sanity checks done by cpuidle_select() to avoid crashing the suspend-to-idle code path in case something is missing. Fixes: 38106313 (PM / sleep: Re-implement suspend-to-idle handling) Original-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
-
由 Rafael J. Wysocki 提交于
Disabling interrupts at the end of cpuidle_enter_freeze() is not useful, because its caller, cpuidle_idle_call(), re-enables them right away after invoking it. To avoid that unnecessary back and forth dance with interrupts, make cpuidle_enter_freeze() enable interrupts after calling enter_freeze_proper() and drop the local_irq_disable() at its end, so that all of the code paths in it end up with interrupts enabled. Then, cpuidle_idle_call() will not need to re-enable interrupts after calling cpuidle_enter_freeze() any more, because the latter will return with interrupts enabled, in analogy with cpuidle_enter(). Reported-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "Just general fixes: radeon, i915, atmel, tegra, amdkfd and one core fix" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (28 commits) drm: atmel-hlcdc: remove clock polarity from crtc driver drm/radeon: only enable DP audio if the monitor supports it drm/radeon: fix atom aux payload size check for writes (v2) drm/radeon: fix 1 RB harvest config setup for TN/RL drm/radeon: enable SRBM timeout interrupt on EG/NI drm/radeon: enable SRBM timeout interrupt on SI drm/radeon: enable SRBM timeout interrupt on CIK v2 drm/radeon: dump full IB if we hit a packet error drm/radeon: disable mclk switching with 120hz+ monitors drm/radeon: use drm_mode_vrefresh() rather than mode->vrefresh drm/radeon: enable native backlight control on old macs drm/i915: Fix frontbuffer false positve. drm/i915: Align initial plane backing objects correctly drm/i915: avoid processing spurious/shared interrupts in low-power states drm/i915: Check obj->vma_list under the struct_mutex drm/i915: Fix a use after free, and unbalanced refcounting drm: atmel-hlcdc: remove useless pm_runtime_put_sync in probe drm: atmel-hlcdc: reset layer A2Q and UPDATE bits when disabling it drm: Fix deadlock due to getconnector locking changes drm/i915: Dell Chromebook 11 has PWM backlight ...
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull block layer fixes from Jens Axboe: "Two smaller fixes for this cycle: - A fixup from Keith so that NVMe compiles without BLK_INTEGRITY, basically just moving the code around appropriately. - A fixup for shm, fixing an oops in shmem_mapping() for mapping with no inode. From Sasha" [ The shmem fix doesn't look block-layer-related, but fixes a bug that happened due to the backing_dev_info removal.. - Linus ] * 'for-linus' of git://git.kernel.dk/linux-block: mm: shmem: check for mapping owner before dereferencing NVMe: Fix for BLK_DEV_INTEGRITY not set
-
git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs由 Linus Torvalds 提交于
Pull xfs fixes from Dave Chinner: "These are fixes for regressions/bugs introduced in the 4.0 merge cycle and problems discovered during the merge window that need to be pushed back to stable kernels ASAP. This contains: - ensure quota type is reset in on-disk dquots - fix missing partial EOF block data flush on truncate extension - fix transaction leak in error handling for new pnfs block layout support - add missing target_ip check to RENAME_EXCHANGE" * tag 'xfs-for-linus-4.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: xfs: cancel failed transaction in xfs_fs_commit_blocks() xfs: Ensure we have target_ip for RENAME_EXCHANGE xfs: ensure truncate forces zeroed blocks to disk xfs: Fix quota type in quota structures when reusing quota file
-
由 Linus Torvalds 提交于
Merge misc fixes from Andrew Morton: "13 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm: add missing __PAGETABLE_{PUD,PMD}_FOLDED defines mm: page_alloc: revert inadvertent !__GFP_FS retry behavior change kernel/sys.c: fix UNAME26 for 4.0 mm: memcontrol: use "max" instead of "infinity" in control knobs zram: use proper type to update max_used_pages drivers/rtc/rtc-ds1685.c: fix conditional in ds1685_rtc_sysfs_time_regs_{show,store} nilfs2: fix potential memory overrun on inode scripts/gdb: add empty package initialization script rtc: ds1685: remove superfluous checks for out-of-range u8 values rtc: ds1685: fix ds1685_rtc_alarm_irq_enable build error memcg: fix low limit calculation mm/nommu: fix memory leak ocfs2: update web page + git tree in documentation
-
由 Kirill A. Shutemov 提交于
Core mm expects __PAGETABLE_{PUD,PMD}_FOLDED to be defined if these page table levels folded. Usually, these defines are provided by <asm-generic/pgtable-nopmd.h> and <asm-generic/pgtable-nopud.h>. But some architectures fold page table levels in a custom way. They need to define these macros themself. This patch adds missing defines. The patch fixes mm->nr_pmds underflow and eliminates dead __pmd_alloc() and __pud_alloc() on architectures without these page table levels. Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: David Howells <dhowells@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johannes Weiner 提交于
Historically, !__GFP_FS allocations were not allowed to invoke the OOM killer once reclaim had failed, but nevertheless kept looping in the allocator. Commit 9879de73 ("mm: page_alloc: embed OOM killing naturally into allocation slowpath"), which should have been a simple cleanup patch, accidentally changed the behavior to aborting the allocation at that point. This creates problems with filesystem callers (?) that currently rely on the allocator waiting for other tasks to intervene. Revert the behavior as it shouldn't have been changed as part of a cleanup patch. Fixes: 9879de73 ("mm: page_alloc: embed OOM killing naturally into allocation slowpath") Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org> Acked-by: NMichal Hocko <mhocko@suse.cz> Reported-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Dave Chinner <david@fromorbit.com> Acked-by: NDavid Rientjes <rientjes@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: <stable@vger.kernel.org> [3.19.x] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jon DeVree 提交于
There's a uname workaround for broken userspace which can't handle kernel versions of 3.x. Update it for 4.x. Signed-off-by: NJon DeVree <nuxi@vault24.org> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johannes Weiner 提交于
The memcg control knobs indicate the highest possible value using the symbolic name "infinity", which is long and awkward to type. Switch to the string "max", which is just as descriptive but shorter and sweeter. This changes a user interface, so do it before the release and before the development flag is dropped from the default hierarchy. Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Tejun Heo <tj@kernel.org> Cc: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joonsoo Kim 提交于
max_used_pages is defined as atomic_long_t so we need to use unsigned long to keep temporary value for it rather than int which is smaller than unsigned long in a 64 bit system. Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joshua Kinard 提交于
Fix a conditional statement checking for NULL in both ds1685_rtc_sysfs_time_regs_show and ds1685_rtc_sysfs_time_regs_store that was using a logical AND when it should be using a logical OR so that we fail out of the function properly if the condition ever evaluates to true. Fixes: aaaf5fbf ("rtc: add driver for DS1685 family of real time clocks") Signed-off-by: NJoshua Kinard <kumba@gentoo.org> Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ryusuke Konishi 提交于
Each inode of nilfs2 stores a root node of a b-tree, and it turned out to have a memory overrun issue: Each b-tree node of nilfs2 stores a set of key-value pairs and the number of them (in "bn_nchildren" member of nilfs_btree_node struct), as well as a few other "bn_*" members. Since the value of "bn_nchildren" is used for operations on the key-values within the b-tree node, it can cause memory access overrun if a large number is incorrectly set to "bn_nchildren". For instance, nilfs_btree_node_lookup() function determines the range of binary search with it, and too large "bn_nchildren" leads nilfs_btree_node_get_key() in that function to overrun. As for intermediate b-tree nodes, this is prevented by a sanity check performed when each node is read from a drive, however, no sanity check has been done for root nodes stored in inodes. This patch fixes the issue by adding missing sanity check against b-tree root nodes so that it's called when on-memory inodes are read from ifile, inode metadata file. Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-