- 27 10月, 2007 2 次提交
-
-
由 Pierre Ossman 提交于
MMC over SPI sends the CID and CSD registers as data, not responses, which means that the host driver won't do the necessary byte flipping for us. Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
-
由 Pierre Ossman 提交于
The flags parameter got removed in a previous commit, but some references were overlooked. Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
-
- 26 10月, 2007 38 次提交
-
-
由 Randy Dunlap 提交于
Coding style cleanups: - change __inline__ to inline; - drop space in "* addr" parameters; - drop space between func. name and '(' The "volatile" keywords are correct according to email from one Linus Torvalds. [Several other arches need some of this also.] Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Randy Dunlap 提交于
Use duplicated inline functions for test_and_set_bit_lock() on x86 instead of #define macros, thus avoiding a bad example. This allows kernel-doc to run cleanly instead of terminating with an error: Error(linux-2.6.24-rc1//include/asm-x86/bitops_32.h:188): cannot understand prototype: 'test_and_set_bit_lock test_and_set_bit ' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (40 commits) USB: open disconnect race in usblcd USB: disconnect open race in legousbtower USB: open disconnect race in iowarrior USB: missing error check in emi62 USB: missing error check in emi26 USB: usb_serial_resume bug fix USB: remove new OHCI build warnings USB: amd5536udc - remove set_mwi() compiler warning USB: usbserial - fix potential deadlock between write() and IRQ usb: serial/pl2303: support for IO Data Device RSAQ5 USB: fix read vs. disconnect race in cytherm driver USB: fix locking in idmouse USB: fix interface sysfs file-creation bug USB: fix ssb_ohci_probe() build bug USB: pl2303: remove can't happen checks, set speed properly and report baud rate USB: mos7840: Clean up old checks and stuff USB rio500.c: fix check-after-use USB iowarrior.c: fix check-after-use USB: add URB_FREE_BUFFER to permissible flags USB: isd200: sort out USB/IDE dependancy mess ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6由 Linus Torvalds 提交于
* 'warnings-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6: ISDN/sc: fix longstanding warning
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6由 Linus Torvalds 提交于
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: pass correct addr in get_fb_unmapped_area(MAP_FIXED)
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: [IPV4]: Explicitly call fib_get_table() in fib_frontend.c [NET]: Use BUILD_BUG_ON in net/core/flowi.c [NET]: Remove in-code externs for some functions from net/core/dev.c [NET]: Don't declare extern variables in net/core/sysctl_net_core.c [TCP]: Remove unneeded implicit type cast when calling tcp_minshall_update() [NET]: Treat the sign of the result of skb_headroom() consistently [9P]: Fix missing unlock before return in p9_mux_poll_start [PKT_SCHED]: Fix sch_prio.c build with CONFIG_NETDEVICES_MULTIQUEUE [IPV4] ip_gre: sendto/recvfrom NBMA address [SCTP]: Consolidate sctp_ulpq_renege_xxx functions [NETLINK]: Fix ACK processing after netlink_dump_start [VLAN]: MAINTAINERS update [DCCP]: Implement SIOCINQ/FIONREAD [NET]: Validate device addr prior to interface-up
-
git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86: x86: fix bogus KERN_ALERT on oops x86: lguest build fix x86: fix CONFIG_KEXEC build breakage
-
git://git.kernel.dk/linux-2.6-block由 Linus Torvalds 提交于
* 'sg' of git://git.kernel.dk/linux-2.6-block: fix sg_phys to use dma_addr_t ub: add sg_init_table for sense and read capacity commands x86: pci-gart fix blackfin: fix sg fallout xtensa: dma-mapping.h is using linux/scatterlist.h functions, so include it SG: audit of drivers that use blk_rq_map_sg() arch/um/drivers/ubd_kern.c: fix a building error SG: Change sg_set_page() to take length and offset argument AVR32: Fix sg_page breakage mmc: sg fallout m68k: sg fallout More SG build fixes sg: add missing sg_init_table calls to zfcp SG build fix
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-lguest由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-lguest: lguest: documentation update lguest: Add to maintainers file. lguest: build fix lguest: clean up lguest_launcher.h lguest: remove unused "wake" element from struct lguest lguest: use defines from x86 headers instead of magic numbers lguest: example launcher header cleanup.
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev由 Linus Torvalds 提交于
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: [libata] sata_nv: SWNCQ should not apply to MCP61 libata-core: Be a bit more relaxed about early DMA zero devices ahci: ahci: implement workaround for ASUS P5W-DH Deluxe ahci_broken_hardreset(), take #2 Fix pata_icside build for recent libata API changes libata: cosmetic clean up in ata_eh_reset() libata-core.c: make 2 functions static [libata] Create internal helper ata_dev_set_feature()
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/netdev-2.6由 Linus Torvalds 提交于
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: [netdrvr] forcedeth: add MCP77 device IDs rndis_host: reduce MTU instead of refusing to talk to devices with low max packet size cpmac: update to new fixed phy driver interface cpmac: convert to napi_struct interface cpmac: use print_mac() instead of MAC_FMT natsemi: fix oops, link back netdevice from private-struct ehea: fix port_napi_disable/enable bonding/bond_main.c: fix cut'n'paste error make bonding/bond_main.c:bond_deinit() static drivers/net/ipg.c: cleanups remove Documentation/networking/net-modules.txt
-
git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched: sched: mark CONFIG_FAIR_GROUP_SCHED as !EXPERIMENTAL sched: isolate SMP balancing code a bit more sched: reduce balance-tasks overhead sched: make cpu_shares_{show,store}() static sched: clean up some control group code sched: constify sched.h sched: document profile=sleep requiring CONFIG_SCHEDSTATS sched: use show_regs() to improve __schedule_bug() output sched: clean up sched_domain_debug() sched: fix fastcall mismatch in completion APIs sched: fix sched_domain sysctl registration again
-
由 Ram Gupta 提交于
This patch fixes the c_entry_count counter of the mbcache. Currently it increments the counter first & allocate the cache entry later. In case of failure to allocate the entry due to insufficient memory this counter is still left incremented. This patch fixes this anomaly. Signed-off-by: NRam Gupta <ram.gupta5@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Howells 提交于
Fix pointer mismatches in proc_sysctl.c. The proc_handler() method returns a size_t through an arg pointer, but is given a pointer to a ssize_t to return into. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jeff Garzik 提交于
The __deprecated marker is quite useful in highlighting the remnants of old APIs that want removing. However, it is quite normal for one or more years to pass, before the (usually ancient, bitrotten) code in question is either updated or deleted. Thus, like __must_check, add a Kconfig option that permits the silencing of this compiler warning. This change mimics the ifdef-ery and Kconfig defaults of MUST_CHECK as closely as possible. Signed-off-by: NJeff Garzik <jgarzik@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
This fixes some totally illogical and wrong code that converts things to and from BCD mode essentially randomly, does math on values in BCD mode etc etc. Introduce a few helper functions to make it a bit more obvious what is going on, and make sure that we always do all the arithmetic (and anythign else, for that matter) in binary, not BCD. Tested by Mark Lord, who found the problem originally, and also pushed the patch back and reminded me about it. Signed-off-by: NMark Lord <mlord@pobox.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Oliver Neukum 提交于
this driver has a possible use after free due to a race when disconnect and open handle intfdata without a lock. Signed-off-by: NOliver Neukum <oneukum@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Oliver Neukum 提交于
again, possible use after free due to touching intfdata without lock. Signed-off-by: NOliver Neukum <oneukum@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Oliver Neukum 提交于
the driver sets intfdata to NULL without lock. Data structures can be freed and accessed. Signed-off-by: NOliver Neukum <oneukum@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Oliver Neukum 提交于
the emi62 also lacks an error check. Signed-off-by: NOliver Neukum <oneukum@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Oliver Neukum 提交于
this drivers lacks an error check. Signed-off-by: NOliver Neukum <oneukum@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Sarah Sharp 提交于
Avoid potential null pointer dereference. Signed-off-by: NSarah Sharp <sarah.a.sharp@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Brownell 提交于
Remove various newly-introduced compiler warnings for OHCI. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Brownell 提交于
Get rid of pointless pci_set_mwi() compiler warning. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jiri Kosina 提交于
USB: usbserial - fix potential deadlock between write() and IRQ usb_serial_generic_write() doesn't disable interrupts when taking port->lock, and could therefore deadlock with usb_serial_generic_read_bulk_callback() being called from interrupt, taking the same lock. Fix it. Signed-off-by: NJiri Kosina <jkosina@suse.cz> Acked-by: NLarry Finger <larry.finger@lwfinger.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Masakazu Mokuno 提交于
This patch adds support for the IO Data Device USB-RSAQ5, PL2303 based USB-serial converter, to pl2303 driver Signed-off-by: NMasakazu Mokuno <mokuno@sm.sony.co.jp> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Oliver Neukum 提交于
the disconnect method of this driver set intfdata to NULL before removing attribute files. The attributes' read methods will happily follow the NULL pointer. Here's the correct ordering. Signed-off-by : Oliver Neukum <oneukum@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Oliver Neukum 提交于
Pete caused me to lock at buggy drivers in this respect. The idmouse has a race between open and disconnect. This patch - solves the open/disconnect race - switches locking to mutexes Signed-off-by: NOliver Neukum <oneukum@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as1005) fixes a rather subtle problem. When usb_set_configuration() registers the interfaces and their files in sysfs, it doesn't expect those files to exist already. But when an interface is registered, its driver may call usb_set_interface() and thereby cause the sysfs files to be created. The result is an error when usb_set_configuration() goes on to create those same files again. The (not-so-great) solution is to have usb_set_configuration() remove any existing files before creating them. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Ingo Molnar 提交于
fix ssb_ohci_probe() build bug: drivers/built-in.o: In function `ssb_ohci_probe': ohci-hcd.c:(.text+0xbff39): undefined reference to `ssb_device_enable' ohci-hcd.c:(.text+0xbff6f): undefined reference to `ssb_admatch_base' ohci-hcd.c:(.text+0xbff8b): undefined reference to `ssb_admatch_size' ohci-hcd.c:(.text+0xbffe5): undefined reference to `ssb_device_disable' [...] the reason was that this Kconfig combination was allowed: CONFIG_SSB=m CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_SSB=y the fix is to require a modular USB_OHCI_HCD build when SSB is modular. Signed-off-by: NIngo Molnar <mingo@elte.hu> Acked-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Cox 提交于
Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Cox 提交于
Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Adrian Bunk 提交于
The Coverity checker spotted that we have already oops'ed if "dev" was NULL in these places. Since "dev" being NULL isn't possible at these places this patch removes the NULL checks. Additionally, I've fixed the formatting of the if's. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Acked-by: NOliver Neukum <oliver@neukum.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Adrian Bunk 提交于
The Coverity checker spotted that we have already oops'ed if "dev" was NULL. Since "dev" being NULL doesn't seem to be possible here this patch removes the NULL check. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Acked-by: NOliver Neukum <oliver@neukum.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Oliver Neukum 提交于
URB_FREE_BUFFER needs to be allowed in the sanity checks to use drivers that use that flag. Signed-off-by: NOliver Neukum <oneukum@suse.de> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Cox 提交于
The ISD200 driver imports a single trivial routine from the IDE layer and in doing so creates a mess of dependancies that drag in the entire old IDE layer. Even more sad - it does this for a routine which is usually (little endian) a null function! - Copy the function into ISD200 - Rename it so it doesn't clash with the ide header prototype - Remove all the depend constraints Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Matthias Kaehlcke 提交于
FTDI Elan driver: Convert the semaphore ftdi->u132_lock to the mutex API Signed-off-by: NMatthias Kaehlcke <matthias.kaehlcke@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as1003) changes uhci-hcd to treat the URB_ISO_ASAP flag the same as other host controller drivers, namely, to schedule an Iso URB for the first available time slot that hasn't already expired. URBs in which the flag isn't set will be scheduled for the first slot following the last URB, even if it has expired. This fixes a problem reported by Martin Bachem. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-