- 30 1月, 2015 2 次提交
-
-
由 Salam Noureddine 提交于
When many pf_packet listeners are created on a lot of interfaces the current implementation using global packet type lists scales poorly. This patch adds per net_device packet type lists to fix this problem. The patch was originally written by Eric Biederman for linux-2.6.29. Tested on linux-3.16. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NSalam Noureddine <noureddine@arista.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nicolas Dichtel 提交于
When IFLA_LINK_NETNSID is used, the netdevice should be built in this link netns and moved at the end to another netns (pointed by the socket netns or IFLA_NET_NS_[PID|FD]). Existing user of the newlink handler will use the netns argument (src_net) to find a link netdevice or to check some other information into the link netns. For example, to find a netdevice, two information are required: an ifindex (usually from IFLA_LINK) and a netns (this link netns). Note: when using IFLA_LINK_NETNSID and IFLA_NET_NS_[PID|FD], a user may create a netdevice that stands in netnsX and with its link part in netnsY, by sending a rtnl message from netnsZ. Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 1月, 2015 6 次提交
-
-
由 Eric Dumazet 提交于
TIME_WAIT sockets are not owning any skb. ip_send_unicast_reply() and tcp_v6_send_response() both use regular sockets. We can safely remove a test in sch_fq and save one cache line miss, as sk_state is far away from sk_pacing_rate. Tested at Google for about one year. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnd Bergmann 提交于
NET_ACT_CONNMARK fails to build if NF_CONNTRACK_MARK is disabled, and d7924450 ("act_connmark: Add missing dependency on NF_CONNTRACK_MARK") fixed that case, but missed the cased where NF_CONNTRACK is a loadable module. This adds the second dependency to ensure that NET_ACT_CONNMARK can only be built-in if NF_CONNTRACK is also part of the kernel rather than a loadable module. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Christoph Hellwig 提交于
The sock_iocb structure is allocate on stack for each read/write-like operation on sockets, and contains various fields of which only the embedded msghdr and sometimes a pointer to the scm_cookie is ever used. Get rid of the sock_iocb and put a msghdr directly on the stack and pass the scm_cookie explicitly to netlink_mmap_sendmsg. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
The if block was supposed to have curly braces. In the current code we complain about dropped rx packets when we shouldn't. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jesse Gross 提交于
Currently, it isn't possible to request checksums on the outer UDP header of tunnels - the TUNNEL_CSUM flag is ignored. This adds support for requesting that UDP checksums be computed on transmit and properly reported if they are present on receive. Signed-off-by: NJesse Gross <jesse@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-next由 David S. Miller 提交于
NFC: 3.20 first pull request This is the first NFC pull request for 3.20. With this one we have: - Secure element support for the ST Micro st21nfca driver. This depends on a few HCI internal changes in order for example to support more than one secure element per controller. - ACPI support for NXP's pn544 HCI driver. This controller is found on many x86 SoCs and is typically enumerated on the ACPI bus there. - A few st21nfca and st21nfcb fixes. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 1月, 2015 32 次提交
-
-
由 David S. Miller 提交于
Andy Shevchenko says: ==================== stmmac: Enable Intel Quark SoC X1000 Ethernet support This is third version of the patch series [1] to bring network card support to Intel Quark SoC. The series has been tested on Intel Galileo board. Changelog v3: - rebase on top of recent net-next - rework an approach to get the custom configuration - rework an approach how to get unique bus_id - improve DMI lookup function [1] http://www.spinics.net/lists/netdev/msg296010.html ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kweh, Hock Leong 提交于
In Intel Quark SoC X1000, both of the Ethernet controllers support MSI interrupt handling. This patch enables them to use MSI interrupt servicing in stmmac_pci for Intel Quark X1000. Signed-off-by: NKweh, Hock Leong <hock.leong.kweh@intel.com> Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andy Shevchenko 提交于
This patch introduces run-time board detection through DMI and MAC-PHY configuration function used by quark_default_data() during initialization. It fills up the phy_addr for Galileo and Galileo Gen2 boards to indicate that the Ethernet MAC controller is or is not connected to any PHY. The implementation takes into consideration for future expansion in Quark series boards that may have different PHY address that is linked to its MAC controllers. This piece of work is derived from Bryan O'Donoghue's initial work for Quark X1000 enabling. Signed-off-by: NKweh, Hock Leong <hock.leong.kweh@intel.com> Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kweh, Hock Leong 提交于
The Intel Quark SoC X1000 provides two 10/100 Mbps Ethernet MAC controllers which may or may not be connected to PHY on board. This MAC controller only supports RMII PHY. This patch add Quark PCI ID as well as Quark default platform data info to this driver. Signed-off-by: NKweh, Hock Leong <hock.leong.kweh@intel.com> Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Karicheri, Muralidharan 提交于
Currently CPTS is built into the netcp driver even though there is no call out to the CPTS driver. This patch removes the dependency in Kconfig and remove cpts.o from the Makefile for NetCP. Signed-off-by: NMurali Karicheri <m-karicheri2@ti.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hariprasad Shenai 提交于
Move firmware version MACRO to a new t4fw_version.h file so that csiostor driver can also use it. Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Praveen Madhavan 提交于
This patch fix is to use default firmware configuration files present in the adapter incase if not available in standard /lib/firmware/* dir. Additional cleanup is done to reuse flash related defines from cxgb4 header file. Please apply over net-next since it depends on previous commit. Signed-off-by: NPraveen Madhavan <praveenm@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Amir Vadai says: ==================== Mellanox ethernet driver updates Jan-27-2015 This patchset introduces some bug fixes, code cleanups and support in a new firmware event called recoverable error events. Patches were applied and tested against commit b8665c6c ("net: dsa/mv88e6352: make mv88e6352_wait generic") Changes from V0: - Patch 6/11 ("net/mlx4_core: Fix struct mlx4_vhcr_cmd to make implicit padding explicit"): - Removed __packed - Rephrased commit message - Added a new patch by Majd ("net/mlx4_core: Update the HCA core clock frequency after INIT_PORT") ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Majd Dibbiny 提交于
The firmware might change the hca core clock frequency after the driver issues the INIT_PORT command. Therefore we need to query the new value again and save in to the cached dev caps. Fixes: ddd8a6c1 ('net/mlx4_core: Read HCA frequency and map internal clock') Signed-off-by: NMajd Dibbiny <majd@mellanox.com> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Or Gerlitz 提交于
We are dumping device capabilities which are supported both by the firmware and the driver. Align the array that holds the capability strings with this practice. Reported-by: NYuval Shaia <yuval.shaia@oracle.com> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matan Barak 提交于
Fix a memory corruption at mlx4_MAD_IFC_wrapper. A table of size dev->caps.pkey_table_len[port]*sizeof(*table) was allocated, but get_full_pkey_table() assumes that the number of entries in the table is a multiplication of 32 (which isn't always correct). Fixes: 0a9a0188 ('mlx4: MAD_IFC paravirtualization') Signed-off-by: NMatan Barak <matanb@mellanox.com> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Saeed Mahameed 提交于
Use cmd->autoneg as a user hint to decide what to set in ethtool set settings callback. When cmd->autoneg == AUTONEG_ENABLE set according to ethtool->advertise otherwise, set according to ethtool->speed. Usage: - ethtool -s eth<x> speed 56000 autoneg off - ethtool -s eth<x> advertise 0x800000 autoneg on While we're here: - Move proto_admin masking outcome check to be adjacent to the operation. - Move en_warn("port reset..") print to "port reset" block. Fixes: 312df74c ("net/mlx4_en: mlx4_en_set_settings() always fails when autoneg is set") Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jack Morgenstein 提交于
mlx4_bf_alloc had an unnecessary/duplicate code line. Did no harm, but not good practice. Reported by the Mellanox Beijing team. Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jack Morgenstein 提交于
Struct mlx4_vhcr was implicitly padded by the gcc compiler on 64-bit architectures. This commit makes that padding explicit, to prevent issues with changing compilers and with incompatibilities between 32-bit architecture implicit padding and 64-bit architecture implicit padding. This structure is used in virtualization for communication between the Host and its Guests. The explicit padding allows 64-bit Hosts (old and new) to continue to interoperate with 64-bit Guests (old and new). However, without this fix, 64-bit Hosts could not interoperate with 32-bit Guests (since these did not insert the padding dword). With this fix, 32-bit Guests will be able to interoperate with 64-bit Hosts (since the structure offsets will be identical on both). Reported-by: NAlexander Schmidt <alexs@linux.vnet.ibm.com> Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jack Morgenstein 提交于
The driver incorrectly assigned an out-mailbox to this command, and used an opcode modifier = 0, which is a reserved value (it should use opcode modifier = 1). Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jack Morgenstein 提交于
The firmware spec states that the timeout for all commands should be 60 seconds. In the past, the spec indicated that there were several classes of timeout (short, medium, and long). The driver has these different timeout classes. We leave the class differentiation in the driver as-is (to protect against any future spec changes), but set the timeout for all classes to be 60 seconds. In addition, we fix a few commands which had hard-coded numeric timeouts specified. Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jack Morgenstein 提交于
Structs allocated for the resource tracker must be freed in the error flow. Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jack Morgenstein 提交于
The reserved lKey is different for each VF. A base lkey value is returned in QUERY_DEV_CAP at offset 0x98. The reserved L_key value for a VF is: VF_lkey = base_lkey + (VF_number << 8). This VF L_key value should be returned in QUERY_FUNC_CAP (opcode-modifier = 0) at offset 0x48. To indicate that the lkey value at offset 0x48 is valid, the Hypervisor sets a flag bit in dword 0x0, offset 27 in the QUERY_FUNC_CAP wrapper function. When the VF calls QUERY_FUNC_CAP, it should check if this flag bit is set. If it is set, the VF should take the reserved lkey value at offset 0x48. If the bit is not set, the VF should not use a reserved lkey (i.e., should set its reserved lkey value to 0). Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jack Morgenstein 提交于
If the firmware can detect a bad cable, allow it to generate an event, and print the problem in the log. Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nicolas Dichtel 提交于
Previous commit is based on a wrong assumption, fdb messages are always sent into the netns where the interface stands (see vxlan_fdb_notify()). These fdb messages doesn't embed the rtnl attribute IFLA_LINK_NETNSID, thus we need to add it (useful to interpret NDA_IFINDEX or NDA_DST for example). Note also that vxlan_nlmsg_size() was not updated. Fixes: 193523bf ("vxlan: advertise netns of vxlan dev in fdb msg") Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Jonathan Toppins says: ==================== bonding: various 802.3ad fixes This patch series is a forward porting of patches we (Cumulus) are shipping in our 3.2 series kernels. These fixes attempt to make 802.3ad bonding mode more predictable in certian state machine transtions in addition to fixing 802.3ad bond carrier determination when bonding min_links option is changed. Specific notes are contained within each patch. For this patch series there are no userspace facing changes, a diff between the modinfo output showed no difference. However, there are behavioral facing changes, primarily in the bond carrier state. Please make sure to review carefully. v2: * fixed some style issues * dropped a portion of patch 1 in favor of more testing on my side ==================== Signed-off-by: NAndy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jonathan Toppins 提交于
fix sparse warning about non-static function drivers/net/bonding/bond_main.c:3737:5: warning: symbol 'bond_3ad_xor_xmit' was not declared. Should it be static? Reviewed-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NJonathan Toppins <jtoppins@cumulusnetworks.com> Signed-off-by: NJay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Satish Ashok 提交于
When a slave is added to a bond and it is not in full duplex mode, AD_PORT_LACP_ENABLED flag is cleared, due to this LACP PDU is not sent on slave. When the duplex is changed to full, the flag needs to be set to send LACP PDU. Cc: Andy Gospodarek <gospo@cumulusnetworks.com> Reviewed-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NSatish Ashok <sashok@cumulusnetworks.com> Signed-off-by: NJonathan Toppins <jtoppins@cumulusnetworks.com> Signed-off-by: NJay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wilson Kok 提交于
This patch attempts to fix the following problems when an actor or partner's aggregator is not active: 1. a slave's lacp port state is marked as AD_STATE_SYNCHRONIZATION even if it is attached to an inactive aggregator. LACP advertises this state to the partner, making the partner think he can move into COLLECTING_DISTRIBUTING state even though this link will not pass traffic on the local side 2. a slave goes into COLLECTING_DISTRIBUTING state without checking if the aggregator is actually active 3. when in COLLECTING_DISTRIBUTING state, the partner parameters may change, e.g. the partner_oper_port_state.SYNCHRONIZATION. The local mux machine is not reacting to the change and continue to keep the slave and bond up 4. When bond slave leaves an inactive aggregator and joins an active aggregator, the actor oper port state need to update to SYNC state. v2: * fix style issues in bond_3ad.c Cc: Andy Gospodarek <gospo@cumulusnetworks.com> Reviewed-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NWilson Kok <wkok@cumulusnetworks.com> Signed-off-by: NJonathan Toppins <jtoppins@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wilson Kok 提交于
Mode 802.3ad, fix incorrect bond slave active state when slave is not in active aggregator. During bond_open(), the bonding driver always sets the slave active flag to true if the bond is not in active-backup, alb, or tlb modes. Bonding should let the aggregator selection logic set the active flag when in 802.3ad mode. Cc: Andy Gospodarek <gospo@cumulusnetworks.com> Reviewed-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NWilson Kok <wkok@cumulusnetworks.com> Signed-off-by: NJonathan Toppins <jtoppins@cumulusnetworks.com> Signed-off-by: NJay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jonathan Toppins 提交于
Cc: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: NJonathan Toppins <jtoppins@cumulusnetworks.com> Signed-off-by: NJay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nicholas Mc Guire 提交于
return type of wait_for_completion_timeout is unsigned long not int, this patch just fixes up the declarations. Signed-off-by: NNicholas Mc Guire <der.herr@hofr.at> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nicholas Mc Guire 提交于
Signed-off-by: NNicholas Mc Guire <der.herr@hofr.at> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 David S. Miller 提交于
Conflicts: arch/arm/boot/dts/imx6sx-sdb.dts net/sched/cls_bpf.c Two simple sets of overlapping changes. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Robert Dolca 提交于
Currently there is no support for ACPI. This patch uses the following configuration: - Device id: NXP5440 - Pin mapping: - 0 IRQ pin - 1 enable pin - 2 firmware pin Signed-off-by: NRobert Dolca <robert.dolca@intel.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Robert Dolca 提交于
gpio_set_value was replaced with gpio_set_value_cansleep in order to allow GPIO access that may sleep. This is particularelly useful when GPIO is accessed using busses like I2C, SPI, USB Signed-off-by: NRobert Dolca <robert.dolca@intel.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Christophe Ricard 提交于
On st21nfca, the mechanism to enable a secure element needs to add 2 properties in order manage the SWP line correctly. Document ese-present and uicc-present properties. Signed-off-by: NChristophe Ricard <christophe-h.ricard@st.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-