- 08 12月, 2011 3 次提交
-
-
由 Anton Vorontsov 提交于
PPC32/64 defines NO_IRQ to zero, so no problems expected. ARM defines NO_IRQ to -1, but OF code relies on IRQ domains support, which returns correct ('0') value in 'no irq' case. So everything should be fine. Other arches might break if some of their OF drivers rely on NO_IRQ being not 0. If so, the drivers must be fixed, finally. [ Rob Herring points out that microblaze should be fixed, and has posted a patch for testing for that. - Linus ] Signed-off-by: NAnton Vorontsov <anton.vorontsov@linaro.org> Acked-by: NWolfram Sang <w.sang@pengutronix.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: vmwgfx: Use kcalloc instead of kzalloc to allocate array drm/i915: fix infinite recursion on unbind due to ilk vt-d w/a drm/radeon/kms: fix return type for radeon_encoder_get_dp_bridge_encoder_id
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fix apparmor dereferencing potentially freed dentry, sanitize __d_path() API
-
- 07 12月, 2011 8 次提交
-
-
由 Thomas Meyer 提交于
The advantage of kcalloc is, that will prevent integer overflows which could result from the multiplication of number of elements and size and it is also a bit nicer to read. The semantic patch that makes this change is available in https://lkml.org/lkml/2011/11/25/107Signed-off-by: NThomas Meyer <thomas@m3y3r.de> Reviewed-by: NJakob Bornecrantz <jakob@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Daniel Vetter 提交于
The recursion loop goes retire_requests->unbind->gpu_idle->retire_reqeusts. Every time we go through this we need a - active object that can be retired - and there are no other references to that object than the one from the active list, so that it gets unbound and freed immediately. Otherwise the recursion stops. So the recursion is only limited by the number of objects that fit these requirements sitting in the active list any time retire_request is called. Issue exercised by tests/gem_unref_active_buffers from i-g-t. There's been a decent bikeshed discussion whether it wouldn't be better to pass around a flag, but imo this is o.k. for such a limited case that only supports a w/a. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42180Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: NChris Wilson <chris@chris-wilson> [ickle- we built better bikesheds, but this keeps the rain off for now] Tested-by: NDave Airlie <airlied@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Seems like something got mis-merged here. Noticed by kallisti5 on IRC. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Al Viro 提交于
__d_path() API is asking for trouble and in case of apparmor d_namespace_path() getting just that. The root cause is that when __d_path() misses the root it had been told to look for, it stores the location of the most remote ancestor in *root. Without grabbing references. Sure, at the moment of call it had been pinned down by what we have in *path. And if we raced with umount -l, we could have very well stopped at vfsmount/dentry that got freed as soon as prepend_path() dropped vfsmount_lock. It is safe to compare these pointers with pre-existing (and known to be still alive) vfsmount and dentry, as long as all we are asking is "is it the same address?". Dereferencing is not safe and apparmor ended up stepping into that. d_namespace_path() really wants to examine the place where we stopped, even if it's not connected to our namespace. As the result, it looked at ->d_sb->s_magic of a dentry that might've been already freed by that point. All other callers had been careful enough to avoid that, but it's really a bad interface - it invites that kind of trouble. The fix is fairly straightforward, even though it's bigger than I'd like: * prepend_path() root argument becomes const. * __d_path() is never called with NULL/NULL root. It was a kludge to start with. Instead, we have an explicit function - d_absolute_root(). Same as __d_path(), except that it doesn't get root passed and stops where it stops. apparmor and tomoyo are using it. * __d_path() returns NULL on path outside of root. The main caller is show_mountinfo() and that's precisely what we pass root for - to skip those outside chroot jail. Those who don't want that can (and do) use d_path(). * __d_path() root argument becomes const. Everyone agrees, I hope. * apparmor does *NOT* try to use __d_path() or any of its variants when it sees that path->mnt is an internal vfsmount. In that case it's definitely not mounted anywhere and dentry_path() is exactly what we want there. Handling of sysctl()-triggered weirdness is moved to that place. * if apparmor is asked to do pathname relative to chroot jail and __d_path() tells it we it's not in that jail, the sucker just calls d_absolute_path() instead. That's the other remaining caller of __d_path(), BTW. * seq_path_root() does _NOT_ return -ENAMETOOLONG (it's stupid anyway - the normal seq_file logics will take care of growing the buffer and redoing the call of ->show() just fine). However, if it gets path not reachable from root, it returns SEQ_SKIP. The only caller adjusted (i.e. stopped ignoring the return value as it used to do). Reviewed-by: NJohn Johansen <john.johansen@canonical.com> ACKed-by: NJohn Johansen <john.johansen@canonical.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Cc: stable@vger.kernel.org
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net: Silence seq_scale() unused warning ipv4:correct description for tcp_max_syn_backlog pasemi_mac: Fix building as module netback: Fix alert message. r8169: fix Rx index race between FIFO overflow recovery and NAPI handler. r8169: Rx FIFO overflow fixes. ipv4: Fix peer validation on cached lookup. ipv4: make sure RTO_ONLINK is saved in routing cache iwlwifi: change the default behavior of watchdog timer iwlwifi: do not re-configure HT40 after associated iwlagn: fix HW crypto for TX-only keys Revert "mac80211: clear sta.drv_priv on reconfiguration" mac80211: fill rate filter for internal scan requests cfg80211: amend regulatory NULL dereference fix cfg80211: fix race on init and driver registration
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: ftrace: Fix hash record accounting bug perf: Fix parsing of __print_flags() in TP_printk() jump_label: jump_label_inc may return before the code is patched ftrace: Remove force undef config value left for testing tracing: Restore system filter behavior tracing: fix event_subsystem ref counting
-
由 Stephen Boyd 提交于
On a CONFIG_NET=y build net/core/secure_seq.c:22: warning: 'seq_scale' defined but not used Signed-off-by: NStephen Boyd <sboyd@codeaurora.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peter Pan(潘卫平) 提交于
Since commit c5ed63d6(tcp: fix three tcp sysctls tuning), sysctl_max_syn_backlog is determined by tcp_hashinfo->ehash_mask, and the minimal value is 128, and it will increase in proportion to the memory of machine. The original description for tcp_max_syn_backlog and sysctl_max_syn_backlog are out of date. Changelog: V2: update description for sysctl_max_syn_backlog Signed-off-by: NWeiping Pan <panweiping3@gmail.com> Reviewed-by: NShan Wei <shanwei88@gmail.com> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 12月, 2011 29 次提交
-
-
由 Ben Hutchings 提交于
Commit ded19add ('pasemic_mac*: Move the PA Semi driver') inadvertently split pasemi_mac into two separate modules with unresolved symbols. Change it back into a single module. Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wei Liu 提交于
The original message in netback_init was 'kthread_run() fails', which should be 'kthread_create() fails'. Signed-off-by: NWei Liu <wei.liu2@citrix.com> Acked-by: NIan Campbell <ian.campbell@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://cavan.codon.org.uk/platform-drivers-x86由 Linus Torvalds 提交于
* 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86: toshiba_acpi: Fix machines that don't support HCI_SYSTEM_EVENT
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: intr_remapping: Fix section mismatch in ir_dev_scope_init() intel-iommu: Fix section mismatch in dmar_parse_rmrr_atsr_dev() x86, amd: Fix up numa_node information for AMD CPU family 15h model 0-0fh northbridge functions x86, AMD: Correct align_va_addr documentation x86/rtc, mrst: Don't register a platform RTC device for for Intel MID platforms x86/mrst: Battery fixes x86/paravirt: PTE updates in k(un)map_atomic need to be synchronous, regardless of lazy_mmu mode x86: Fix "Acer Aspire 1" reboot hang x86/mtrr: Resolve inconsistency with Intel processor manual x86: Document rdmsr_safe restrictions x86, microcode: Fix the failure path of microcode update driver init code Add TAINT_FIRMWARE_WORKAROUND on MTRR fixup x86/mpparse: Account for bus types other than ISA and PCI x86, mrst: Change the pmic_gpio device type to IPC mrst: Added some platform data for the SFI translations x86,mrst: Power control commands update x86/reboot: Blacklist Dell OptiPlex 990 known to require PCI reboot x86, UV: Fix UV2 hub part number x86: Add user_mode_vm check in stack_overflow_check
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Fix loss of notification with multi-event perf, x86: Force IBS LVT offset assignment for family 10h perf, x86: Disable PEBS on SandyBridge chips trace_events_filter: Use rcu_assign_pointer() when setting ftrace_event_call->filter perf session: Fix crash with invalid CPU list perf python: Fix undefined symbol problem perf/x86: Enable raw event access to Intel offcore events perf: Don't use -ENOSPC for out of PMU resources perf: Do not set task_ctx pointer in cpuctx if there are no events in the context perf/x86: Fix PEBS instruction unwind oprofile, x86: Fix crash when unloading module (nmi timer mode) oprofile: Fix crash when unloading module (hr timer mode)
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clockevents: Set noop handler in clockevents_exchange_device() tick-broadcast: Stop active broadcast device when replacing it clocksource: Fix bug with max_deferment margin calculation rtc: Fix some bugs that allowed accumulating time drift in suspend/resume rtc: Disable the alarm in the hardware
-
由 Linus Torvalds 提交于
Merge branches 'core-urgent-for-linus' and 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: slab, lockdep: Fix silly bug * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Fix race condition when stopping the irq thread
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched, x86: Avoid unnecessary overflow in sched_clock sched: Fix buglet in return_cfs_rq_runtime() sched: Avoid SMT siblings in select_idle_sibling() if possible sched: Set the command name of the idle tasks in SMP kernels sched, rt: Provide means of disabling cross-cpu bandwidth sharing sched: Document wait_for_completion_*() return values sched_fair: Fix a typo in the comment describing update_sd_lb_stats sched: Add a comment to effective_load() since it's a pain
-
git://git390.marist.edu/pub/scm/linux-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] ap: Setup timer for sending messages after reset. [S390] cio: fix chsc_chp_vary [S390] cio: provide fake irb for transport mode IO [S390] cio: disallow driver io for known to be broken paths [S390] hibernate: directly trigger subchannel evaluation [S390] remove reset of system call restart on psw changes [S390] add missing .set function for NT_S390_LAST_BREAK regset [S390] fix page change underindication in pgste_update_all [S390] ptrace inferior call interactions with TIF_SYSCALL [S390] kdump: Replace is_kdump_kernel() with OLDMEM_BASE check
-
由 françois romieu 提交于
Since 92fc43b4, rtl8169_tx_timeout ends up resetting Rx and Tx indexes and thus racing with the NAPI handler via -> rtl8169_hw_reset -> rtl_hw_reset -> rtl8169_init_ring_indexes What about returning to the original state ? rtl_hw_reset is only used by rtl8169_hw_reset and rtl8169_init_one. The latter does not need rtl8169_init_ring_indexes because the indexes still contain their original values from the newly allocated network device private data area (i.e. 0). rtl8169_hw_reset is used by: 1. rtl8169_down Helper for rtl8169_close. rtl8169_open explicitely inits the indexes anyway. 2. rtl8169_pcierr_interrupt Indexes are set by rtl8169_reinit_task. 3. rtl8169_interrupt rtl8169_hw_reset is needed when the device goes down. See 1. 4. rtl_shutdown System shutdown handler. Indexes are irrelevant. 5. rtl8169_reset_task Indexes must be set before rtl_hw_start is called. 6. rtl8169_tx_timeout Indexes should not be set. This is the job of rtl8169_reset_task anyway. The removal of rtl8169_hw_reset in rtl8169_tx_timeout and its move in rtl8169_reset_task do not change the analysis. Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com> Cc: hayeswang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 françois romieu 提交于
Realtek has specified that the post 8168c gigabit chips and the post 8105e fast ethernet chips recover automatically from a Rx FIFO overflow. The driver does not need to clear the RxFIFOOver bit of IntrStatus and it should rather avoid messing it. The implementation deserves some explanation: 1. events outside of the intr_event bit mask are now ignored. It enforces a no-processing policy for the events that either should not be there or should be ignored. 2. RxFIFOOver was already ignored in rtl_cfg_infos[RTL_CFG_1] for the whole 8168 line of chips with two exceptions: - RTL_GIGA_MAC_VER_22 since b5ba6d12 ("use RxFIFO overflow workaround for 8168c chipset."). This one should now be correctly handled. - RTL_GIGA_MAC_VER_11 (8168b) which requires a different Rx FIFO overflow processing. Though it does not conform to Realtek suggestion above, the updated driver includes no change for RTL_GIGA_MAC_VER_12 and RTL_GIGA_MAC_VER_17. Both are 8168b. RTL_GIGA_MAC_VER_12 is common and a bit old so I'd rather wait for experimental evidence that the change suggested by Realtek really helps or does not hurt in unexpected ways. Removed case statements in rtl8169_interrupt are only 8168 relevant. 3. RxFIFOOver is masked for post 8105e 810x chips, namely the sole 8105e (RTL_GIGA_MAC_VER_30) itself. Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com> Cc: hayeswang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Walleij 提交于
I screwed up by compiling that driver for the machine rather than the arch. Correcting this fixes the build error. Cc: Grant Likely <grant.likely@secretlab.ca> Reported-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NLinus Walleij <linus.walleij@stericsson.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Steven Rostedt 提交于
If the set_ftrace_filter is cleared by writing just whitespace to it, then the filter hash refcounts will be decremented but not updated. This causes two bugs: 1) No functions will be enabled for tracing when they all should be 2) If the users clears the set_ftrace_filter twice, it will crash ftrace: ------------[ cut here ]------------ WARNING: at /home/rostedt/work/git/linux-trace.git/kernel/trace/ftrace.c:1384 __ftrace_hash_rec_update.part.27+0x157/0x1a7() Modules linked in: Pid: 2330, comm: bash Not tainted 3.1.0-test+ #32 Call Trace: [<ffffffff81051828>] warn_slowpath_common+0x83/0x9b [<ffffffff8105185a>] warn_slowpath_null+0x1a/0x1c [<ffffffff810ba362>] __ftrace_hash_rec_update.part.27+0x157/0x1a7 [<ffffffff810ba6e8>] ? ftrace_regex_release+0xa7/0x10f [<ffffffff8111bdfe>] ? kfree+0xe5/0x115 [<ffffffff810ba51e>] ftrace_hash_move+0x2e/0x151 [<ffffffff810ba6fb>] ftrace_regex_release+0xba/0x10f [<ffffffff8112e49a>] fput+0xfd/0x1c2 [<ffffffff8112b54c>] filp_close+0x6d/0x78 [<ffffffff8113a92d>] sys_dup3+0x197/0x1c1 [<ffffffff8113a9a6>] sys_dup2+0x4f/0x54 [<ffffffff8150cac2>] system_call_fastpath+0x16/0x1b ---[ end trace 77a3a7ee73794a02 ]--- Link: http://lkml.kernel.org/r/20111101141420.GA4918@debianReported-by: NRabin Vincent <rabin@rab.in> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
由 Steven Rostedt 提交于
A update is made to the sched:sched_switch event that adds some logic to the first parameter of the __print_flags() that shows the state of tasks. This change cause perf to fail parsing the flags. A simple fix is needed to have the parser be able to process ops within the argument. Cc: stable@vger.kernel.org Reported-by: NAndrew Vagin <avagin@openvz.org> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
由 Gleb Natapov 提交于
If cpu A calls jump_label_inc() just after atomic_add_return() is called by cpu B, atomic_inc_not_zero() will return value greater then zero and jump_label_inc() will return to a caller before jump_label_update() finishes its job on cpu B. Link: http://lkml.kernel.org/r/20111018175551.GH17571@redhat.com Cc: stable@vger.kernel.org Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: NJason Baron <jbaron@redhat.com> Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
由 Steven Rostedt 提交于
A forced undef of a config value was used for testing and was accidently left in during the final commit. This causes x86 to run slower than needed while running function tracing as well as causes the function graph selftest to fail when DYNMAIC_FTRACE is not set. This is because the code in MCOUNT expects the ftrace code to be processed with the config value set that happened to be forced not set. The forced config option was left in by: commit 6331c28c ftrace: Fix dynamic selftest failure on some archs Link: http://lkml.kernel.org/r/20111102150255.GA6973@debian Cc: stable@vger.kernel.org Reported-by: NRabin Vincent <rabin@rab.in> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
由 Li Zefan 提交于
Though not all events have field 'prev_pid', it was allowed to do this: # echo 'prev_pid == 100' > events/sched/filter but commit 75b8e982 (tracing/filter: Swap entire filter of events) broke it without any reason. Link: http://lkml.kernel.org/r/4EAF46CF.8040408@cn.fujitsu.comSigned-off-by: NLi Zefan <lizf@cn.fujitsu.com> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
由 Ilya Dryomov 提交于
Fix a bug introduced by e9dbfae5, which prevents event_subsystem from ever being released. Ref_count was added to keep track of subsystem users, not for counting events. Subsystem is created with ref_count = 1, so there is no need to increment it for every event, we have nr_events for that. Fix this by touching ref_count only when we actually have a new user - subsystem_open(). Cc: stable@vger.kernel.org Signed-off-by: NIlya Dryomov <idryomov@gmail.com> Link: http://lkml.kernel.org/r/1320052062-7846-1-git-send-email-idryomov@gmail.comSigned-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
由 David S. Miller 提交于
If ipv4_valdiate_peer() fails during a cached entry lookup, we'll NULL derer since the loop iterator assumes rth is not NULL. Letting this be handled as a failure is just bogus, so just make it not fail. If we have trouble getting a non-NULL neighbour for the redirected gateway, just restore the original gateway and continue. The very next use of this cached route will try again. Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Seth Forshee 提交于
The Satellite C670-10V generates notifications for hotkeys but does not support HCI_SYSTEM_EVENT. As a result when a hotkey is pressed it gets stuck in an infinite loop in toshiba_acpi_notify. To fix this, detect whether or not HCI_SYSTEM_EVENT is supported up-front and don't try to read system events if it isn't supported. In addition, limit the number of retries when reading HCI_SYSTEM_EVENT fails so that this loop cannot run unbounded. Signed-off-by: NSeth Forshee <seth.forshee@canonical.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Sergey Senozhatsky 提交于
Fix: Section mismatch in reference from the function ir_dev_scope_init() to the function .init.text:dmar_dev_scope_init() The function ir_dev_scope_init() references the function __init dmar_dev_scope_init(). Signed-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Youquan Song <youquan.song@intel.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Link: http://lkml.kernel.org/r/20111026161507.GB10103@swordfishSigned-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Sergey Senozhatsky 提交于
dmar_parse_rmrr_atsr_dev() calls rmrr_parse_dev() and atsr_parse_dev() which are both marked as __init. Section mismatch in reference from the function dmar_parse_rmrr_atsr_dev() to the function .init.text:dmar_parse_dev_scope() The function dmar_parse_rmrr_atsr_dev() references the function __init dmar_parse_dev_scope(). Section mismatch in reference from the function dmar_parse_rmrr_atsr_dev() to the function .init.text:dmar_parse_dev_scope() The function dmar_parse_rmrr_atsr_dev() references the function __init dmar_parse_dev_scope(). Signed-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: iommu@lists.linux-foundation.org Cc: Joerg Roedel <joerg.roedel@amd.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Link: http://lkml.kernel.org/r/20111026154539.GA10103@swordfishSigned-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Andreas Herrmann 提交于
I've received complaints that the numa_node attribute for family 15h model 00-0fh (e.g. Interlagos) northbridge functions shows -1 instead of the proper node ID. Correct this with attached quirks (similar to quirks for other AMD CPU families used in multi-socket systems). Signed-off-by: NAndreas Herrmann <andreas.herrmann3@amd.com> Cc: Frank Arnold <frank.arnold@amd.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Link: http://lkml.kernel.org/r/20111202072143.GA31916@alberich.amd.comSigned-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Borislav Petkov 提交于
Commit dfb09f9b ("x86, amd: Avoid cache aliasing penalties on AMD family 15h") introduced a kernel command line parameter called 'align_va_addr' which still refers to arguments used in an earlier version of the patch and which got changed without updating the documentation. Correct that omission. Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com> Cc: Frank Arnold <frank.arnold@amd.com> Link: http://lkml.kernel.org/r/1321873819-29541-1-git-send-email-bp@amd64.orgSigned-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Mathias Nyman 提交于
Intel MID x86 platforms have a memory mapped virtual RTC instead. No MID platform have the default ports (and accessing them may do weird stuff). Signed-off-by: NMathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: NAlan Cox <alan@linux.intel.com> Cc: feng.tang@intel.com Cc: Feng Tang <feng.tang@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Major Lee 提交于
When DCDC input line over current detecting, PMIC will change charging current automatically. Logging event is enough. Signed-off-by: NMajor Lee <major_lee@wistron.com> Signed-off-by: NAlan Cox <alan@linux.intel.com> Cc: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: Feng Tang <feng.tang@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> [fix build] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Konrad Rzeszutek Wilk 提交于
Fix an outstanding issue that has been reported since 2.6.37. Under a heavy loaded machine processing "fork()" calls could crash with: BUG: unable to handle kernel paging request at f573fc8c IP: [<c01abc54>] swap_count_continued+0x104/0x180 *pdpt = 000000002a3b9027 *pde = 0000000001bed067 *pte = 0000000000000000 Oops: 0000 [#1] SMP Modules linked in: Pid: 1638, comm: apache2 Not tainted 3.0.4-linode37 #1 EIP: 0061:[<c01abc54>] EFLAGS: 00210246 CPU: 3 EIP is at swap_count_continued+0x104/0x180 .. snip.. Call Trace: [<c01ac222>] ? __swap_duplicate+0xc2/0x160 [<c01040f7>] ? pte_mfn_to_pfn+0x87/0xe0 [<c01ac2e4>] ? swap_duplicate+0x14/0x40 [<c01a0a6b>] ? copy_pte_range+0x45b/0x500 [<c01a0ca5>] ? copy_page_range+0x195/0x200 [<c01328c6>] ? dup_mmap+0x1c6/0x2c0 [<c0132cf8>] ? dup_mm+0xa8/0x130 [<c013376a>] ? copy_process+0x98a/0xb30 [<c013395f>] ? do_fork+0x4f/0x280 [<c01573b3>] ? getnstimeofday+0x43/0x100 [<c010f770>] ? sys_clone+0x30/0x40 [<c06c048d>] ? ptregs_clone+0x15/0x48 [<c06bfb71>] ? syscall_call+0x7/0xb The problem is that in copy_page_range() we turn lazy mode on, and then in swap_entry_free() we call swap_count_continued() which ends up in: map = kmap_atomic(page, KM_USER0) + offset; and then later we touch *map. Since we are running in batched mode (lazy) we don't actually set up the PTE mappings and the kmap_atomic is not done synchronously and ends up trying to dereference a page that has not been set. Looking at kmap_atomic_prot_pfn(), it uses 'arch_flush_lazy_mmu_mode' and doing the same in kmap_atomic_prot() and __kunmap_atomic() makes the problem go away. Interestingly, commit b8bcfe99 ("x86/paravirt: remove lazy mode in interrupts") removed part of this to fix an interrupt issue - but it went to far and did not consider this scenario. Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 John W. Linville 提交于
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
-