- 08 12月, 2010 2 次提交
-
-
由 Varadarajan, Charulatha 提交于
Implement GPIO as a platform device. GPIO APIs are used in machine_init functions. Hence it is required to complete GPIO probe before board_init. Therefore GPIO device register and driver register are implemented as postcore_initcalls. omap_gpio_init() does nothing now and this function would be removed in the next patch as it's usage is spread across most of the board files. Inorder to convert GPIO as platform device, modifications are required in clockxxxx_data.c file for OMAP1 so that device names can be used to obtain clock instead of getting clocks by name/NULL ptr. Use runtime pm APIs (pm_runtime_put*/pm_runtime_get*) for enabling or disabling the clocks, modify sysconfig settings and remove usage of clock FW APIs. Note 1: Converting GPIO driver to use runtime PM APIs is not done as a separate patch because GPIO clock names are different for various OMAPs and are different for some of the banks in the same CPU. This would need usage of cpu_is checks and bank id checks while using clock FW APIs in the gpio driver. Hence while making GPIO a platform driver framework, PM runtime APIs are used directly. Note 2: While implementing GPIO as a platform device, pm runtime APIs are used as mentioned above and modification is not done in gpio's prepare for idle/ resume after idle functions. This would be done in the next patch series and GPIO driver would be made to use dev_pm_ops instead of sysdev_class in that series only. Due to the above, the GPIO driver implicitly relies on CM_AUTOIDLE = 1 on its iclk for power management to work, since the driver never disables its iclk. This would be taken care in the next patch series (see Note 3 below). Refer to http://www.mail-archive.com/linux-omap@vger.kernel.org/msg39112.html for more details. Note 3: only pm_runtime_get_sync is called in gpio's probe() and pm_runtime_put* is never called. This is to make the implementation similar to the existing GPIO code. Another patch series would be sent to correct this. In OMAP3 and OMAP4 gpio's debounce clocks are optional clocks. They are enabled/ disabled whenever required using clock framework APIs TODO: 1. Cleanup the GPIO driver. Use function pointers and register offest pointers instead of using hardcoded values 2. Remove all cpu_is_ checks and OMAP specific macros 3. Remove usage of gpio_bank array so that only instance specific information is used in driver code 4. Rename 'method'/ avoid it's usage 5. Fix the non-wakeup gpios handling for OMAP2430, OMAP3 & OMAP4 6. Modify gpio's prepare for idle/ resume after idle functions to use runtime pm implentation. Signed-off-by: NCharulatha V <charu@ti.com> Signed-off-by: NRajendra Nayak <rnayak@ti.com> Reviewed-by: NBasak, Partha <p-basak2@ti.com> Acked-by: NKevin Hilman <khilman@deeprootsystems.com> [tony@atomide.com: updated for bank specific revision and updated boards] Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
Looks like some boards are calling gpio_request from init_irq. This will make the request_irq fail, as GPIO will be initialized as postcore_initcall. Reported-by: NPaul Walmsley <paul@pwsan.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 20 10月, 2010 1 次提交
-
-
由 Nicolas Pitre 提交于
Since we're now using addruart to establish the debug mapping, we can remove the io_pg_offst and phys_io members of struct machine_desc. The various declarations were removed using the following script: grep -rl MACHINE_START arch/arm | xargs \ sed -i '/MACHINE_START/,/MACHINE_END/ { /\.\(phys_io\|io_pg_offst\)/d }' [ Initial patch was from Jeremy Kerr, example script from Russell King ] Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Eric Miao <eric.miao at canonical.com>
-
- 16 7月, 2010 1 次提交
-
-
由 Russell King 提交于
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 05 7月, 2010 3 次提交
-
-
由 Christoph Egger 提交于
OMAP_IR doesn't exist in Kconfig, therefore removing all references for it from the source code. Signed-off-by: NChristoph Egger <siccegge@cs.fau.de> [tony@atomide.com: updated for new mux code] Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
This way we get pin muxing out of plat-omap and can convert H4 to use the new mux functions. Note that it should be safe to assume we can mux all the keypad pins except on H4 which may have Menelaus connected. Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
Move omap1 FS USB platform init code into mach-omap1/usb.c Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 16 2月, 2010 1 次提交
-
-
由 Ladislav Michl 提交于
Convert OMAP based boards to use physmap-flash. Refreshed against today's Linux omap kernel tree Cc: linux-mtd@lists.infradead.org Signed-off-by: NLadislav Michl <ladis@linux-mips.org> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 12 12月, 2009 2 次提交
-
-
由 Ladislav Michl 提交于
Since omapnand driver never find its way into mainline, switch to gen_nand instead. Following patch is compile tested only, but it is based on code I wrote for NetStar board and runtime tested it there. Signed-off-by: NLadislav Michl <ladis@linux-mips.org> Cc: Imre Deak <imre.deak@nokia.com> Cc: Brian Swetland <swetland@google.com> Cc: Kevin Hilman <kjh@hilman.org> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Ladislav Michl 提交于
Use smc91x_platdata to setup smc91x, so we can get rid of OMAP specific stuff in smc91x driver Signed-off-by: NLadislav Michl <ladis@linux-mips.org> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 21 10月, 2009 1 次提交
-
-
由 Tony Lindgren 提交于
Move the remaining headers under plat-omap/include/mach to plat-omap/include/plat. Also search and replace the files using these headers to include using the right path. This was done with: #!/bin/bash mach_dir_old="arch/arm/plat-omap/include/mach" plat_dir_new="arch/arm/plat-omap/include/plat" headers=$(cd $mach_dir_old && ls *.h) omap_dirs="arch/arm/*omap*/ \ drivers/video/omap \ sound/soc/omap" other_files="drivers/leds/leds-ams-delta.c \ drivers/mfd/menelaus.c \ drivers/mfd/twl4030-core.c \ drivers/mtd/nand/ams-delta.c" for header in $headers; do old="#include <mach\/$header" new="#include <plat\/$header" for dir in $omap_dirs; do find $dir -type f -name \*.[chS] | \ xargs sed -i "s/$old/$new/" done find drivers/ -type f -name \*omap*.[chS] | \ xargs sed -i "s/$old/$new/" for file in $other_files; do sed -i "s/$old/$new/" $file done done for header in $(ls $mach_dir_old/*.h); do git mv $header $plat_dir_new/ done Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 29 8月, 2009 1 次提交
-
-
由 Kalle Valo 提交于
OMAP tags are deprecrated so drop them. Drop UART config data which decides which UARTs to enable during boot. This is no longer necessary since serial core code disables clocks after inactivity. Background: with new UART idle code, all on-chip UARTs are idled using a configurable inactivity timer (default 5 seconds.) After the inactivity timer, UART clocks are disabled automatically. Signed-off-by: NKalle Valo <kalle.valo@iki.fi> Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 24 3月, 2009 2 次提交
-
-
由 Felipe Balbi 提交于
OMAP_TAGS should vanish soon since they're not generic arm tags. Most of them can be converted to a platform_data or parsed from a command line like e.g. serial tag. For OMAP_TAG_USB we just let boards call omap_usb_init() passing a pointer to omap_usb_config. Patch updated by Tony for mainline, basically make n770 and h4 compile. Also folded in a fix for OSK by David Brownell <dbrownell@users.sourceforge.net>. Signed-off-by: NFelipe Balbi <felipe.balbi@nokia.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
Also move board-h2.h to mach-omap1. Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 15 1月, 2009 1 次提交
-
-
由 Tony Lindgren 提交于
This patch removes old platform devices. Alsa should now be using the ASoC driver. For boards not yet using ASoC, please see sound/soc/omap/osk5912.c. Add dummy aic23_power_up and aic23_power_down functions for 770 to keep things compiling. Remove references to omap_gpio_switch, and unused h2_nand_dev_ready function. This patch is based on an earlier patch by Arun KS. Cc: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: NArun KS <arunks@mistralsolutions.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 11 12月, 2008 5 次提交
-
-
由 Tony Lindgren 提交于
This will simplify the MMC low-level init, and make it more flexible to add support for a newer MMC controller in the following patches. The patch rearranges platform data and gets rid of slot vs controller confusion in the old data structures. Also fix device id numbering in the clock code. Some code snippets are based on an earlier patch by Russell King <linux@arm.linux.org.uk>. Cc: Pierre Ossman <drzeus-mmc@drzeus.cx> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
Most of the omap1 MMC boards got broken by an earlier patch 138ab9f8. If you look closely, the MMC init funtions are pretty much just stubs. Remove broken init code to make room for cleaner MMC init code. Cc: Pierre Ossman <drzeus-mmc@drzeus.cx> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Jarkko Nikula 提交于
Switch to gpio_request/free calls Signed-off-by: NJarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 David Brownell 提交于
More conversion to the standard GPIO interfaces: stop using omap_set_gpio_direction() entirely, and switch over to the gpio_direction_output() call. Note that because gpio_direction_output() includes the initial value, this change isn't quite transparent. - For the call sites which defined an initial value either before or after setting the direction, that value was used. When that value was previously assigned afterwards, this could eliminate a brief output glitch ... and possibly change behavior. In a few cases (LCDs) several values were assigned together ... those were re-arranged to match the explicit sequence provided. - Some call sites didn't define such a value; so I chose an initial "off/reset" value that seemed to default to "off". In short, files touched by this patch might notice some small changes in startup behavior (with trivial fixes). Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 David Brownell 提交于
This patch replaces some legacy OMAP GPIO calls with the "new" (not really, any more!) calls that work on most platforms. The calls addressed by this patch are the simple ones to get and set values ... for code that's in mainline, including the implementations of those calls. Except for the declarations and definitions of those calls, all of these changes were performed by a simple SED script. Plus, a few "if() set() else set()" branches were merged by hand. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 07 8月, 2008 2 次提交
-
-
由 Russell King 提交于
This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Remove includes of asm/hardware.h in addition to asm/arch/hardware.h. Then, since asm/hardware.h only exists to include asm/arch/hardware.h, update everything to directly include asm/arch/hardware.h and remove asm/hardware.h. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 30 4月, 2008 1 次提交
-
-
由 Jean Delvare 提交于
Based on earlier work by Jon Smirl and Jochen Friedrich. Update most new-style i2c drivers to use standard module aliasing instead of the old driver_name/type driver matching scheme. I've left the video drivers apart (except for SoC camera drivers) as they're a bit more diffcult to deal with, they'll have their own patch later. Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: Jon Smirl <jonsmirl@gmail.com> Cc: Jochen Friedrich <jochen@scram.de>
-
- 05 3月, 2008 1 次提交
-
-
由 David Brownell 提交于
H2 and H3 were broken on by e27a93a9, which removed declarations for their tps6501x chips. This resolves that issue for the H2. (Note that this patch *also* broke the isp1301 support on H2; it presumed a not-yet-merged new-style I2c driver.) Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 09 2月, 2008 5 次提交
-
-
由 Tony Lindgren 提交于
This patch cleans up omap1 files to sync up with linux-omap tree: - Remove omap-generic MMC config as it should be defined in board-*.c files instead of using board-generic.c - New style I2C board_info from David Brownell <dbrownell@users.sourceforge.net> - Init section fixes from Dirk Behme <dirk.behme@googlemail.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Jarkko Nikula 提交于
This patch starts using introduced I2C bus registration helper by cleaning up registration currently done in various places and by doing necessary board file modifications. Signed-off-by: NJarkko Nikula <jarkko.nikula@nokia.com> Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Felipe Balbi 提交于
Make omap1 use new MMC multislot structures. The related MMC patches will be sent separately. Signed-off-by: NFelipe Balbi <felipe.lima@indt.org.br> Signed-off-by: NAnderson Briglia <anderson.briglia@indt.org.br> Signed-off-by: NCarlos Eduardo Aguiar <carlos.aguiar@indt.org.br> Signed-off-by: NDavid Cohen <david.cohen@indt.org.br> Signed-off-by: NEduardo Valentin <eduardo.valentin@indt.org.br> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 David Cohen 提交于
Change the comments to C style Signed-off-by: NDavid Cohen <david.cohen@indt.org.br> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
This patch adds omap_nand_platform data based on a patch by Shahrom Sharif-Kashani <sshahrom@micron.com>, and makes omap1 boards to use omap_nand_platform_data instead of nand_platform_data used earlier. Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 28 1月, 2008 2 次提交
-
-
由 Russell King 提交于
smc91x is shared between many different platforms. Each platform needs to specify the interrupt type, and in some cases the irq type depends on more than just the build configuration - it depends on runtime checks. Rather than throwing this code into the SMC_IRQ_FLAGS definition, provide a way for these flags to be passed via the IRQ resource itself. Note that IRQF_TRIGGER_* constants are intentionally defined to correspond with the IORESOURCE_IRQ_* interrupt type flags, in much the same way that the low bits of PCI iomem resources correspond with the BAR flag bits. Also provide a way to configure smc91x to read the IRQ flags from the resource. Once all platforms have been converted over (signified by all definitions of SMC_IRQ_FLAGS being -1) SMC_IRQ_FLAGS should be removed. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Acked-by: NNicolas Pitre <nico@cam.org> Acked-by: NJeff Garzik <jgarzik@redhat.com>
-
由 David Brownell 提交于
Move the tps65010 header file from the OMAP arch directory to the more generic <linux/i2c/...> directory, and remove the spurious dependency of this driver on OMAP. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 31 10月, 2007 1 次提交
-
-
由 Russell King 提交于
Fix: arch/arm/mach-omap1/built-in.o: In function `h2_init': board-h2.c:(.init.text+0xbb4): undefined reference to `i2c_register_board_info' Acked-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 14 10月, 2007 1 次提交
-
-
由 David Brownell 提交于
Switch the tps65010 driver into a "new-style" I2C driver, and convert all of its in-tree users (board support for OSK, H2, H3) accordingly. That accounts for most of the board-specific code in this driver; the rest of that code is now moved into board-specific initcalls. Also remove some of the many now-superfluous #includes. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 21 9月, 2007 1 次提交
-
-
由 Tony Lindgren 提交于
This patch syncs omap board specific files with linux-omap tree. Patch consists mostly of driver updates done in linux-omap tree for drivers not yet in mainline kernel. Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 11 5月, 2007 1 次提交
-
-
由 Tony Lindgren 提交于
Fix section mismatch warning Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 07 3月, 2007 1 次提交
-
-
由 Dirk Behme 提交于
ARM: OMAP: Fix missing #include <linux/workqueue.h> in board-h2.c resulting in In file included from arch/arm/mach-omap1/board-h2.c:40: include/asm/arch/irda.h:27: error: field 'gpio_expa' has incomplete type Signed-off-by: Dirk Behme <dirk.behme_at_gmail.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 30 9月, 2006 1 次提交
-
-
由 Komal Shah 提交于
This patch adds keymapsize, delay and debounce flag in the keypad platform data for various TI OMAP1/2 based boards like F-sample, H2, H3, Innovator, Nokia770, OSK, Perseus and H4. Signed-off-by: NKomal Shah <komal_shah802003@yahoo.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 03 4月, 2006 1 次提交
-
-
由 Tony Lindgren 提交于
Patch from Tony Lindgren This patch syncs OMAP board support with linux-omap tree. The highlights of the patch are: - Add support for Nokia 770 by Juha Yrjola - Add support for Samsung Apollon by Kyungmin Park - Add support for Amstrad E3 videophone by Jonathan McDowell - Remove board-netstar.c board support as requested by Ladislav Michl - Do platform_device registration in board files by Komal Shah et al. Signed-off-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 09 2月, 2006 1 次提交
-
-
由 Tony Lindgren 提交于
Patch from Tony Lindgren This patch fixes the low-level IO init for omap1 boards. Signed-off-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 14 1月, 2006 1 次提交
-
-
由 Nicolas Pitre 提交于
Patch from Nicolas Pitre This field is redundent since it must be equal to PHYS_OFFSET anyway. Now that no code uses it anymore, mark it deprecated and remove all initializations from the tree. Signed-off-by: NNicolas Pitre <nico@cam.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-