Move the core functionality of headers_install
and headers_check to two small perl scripts.
The makefile is adapted to use the perl scrip and
changed to operate on all files in a directory.
So if one file is changed then all files in the
directory is processed.

perl were chosen for the helper scripts because this
is pure text processing which perl is good at and
especially the headers_check.pl script are expected to
see changes / new checks implmented.

The speed is ~300% faster on this box.
And the output generated to the screen is now down to
two lines per directory (one for install, one for check)
so it is easier to scroll back after a kernel build.

The perl scripts has been brought to sanity by patient
feedback from: Vegard Nossum <vegard.nossum@gmail.com>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Move it to the top-level file to decide if we install/check
the generic headers or the arch specific headers.

This revealed a long standing bug where "make headers_check_all"
relied on the files in asm/ for the current architecture.
So make headers_check_all is now broken by this commit.

In addition:

o add a simpler way to detect if an arch support
  exporting header files.

o add 'set -e;' so we error out early if
  make headers_check_all fails.

o add sparc64 and cris to arch we do not process
  in make headers_*_all because:

    sparc64 - use sparc to export headers
    cris    - is know seriously broken

Includes suggestions from: David Woodhouse
<dwmw2@infradead.org>.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Cc: David Woodhouse <dwmw2@infradead.org>

Fix the a.out.h case by setting SRCARCH and error
out early in case of an error.
The a.out.h case failed with the *_all targets.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

No functional changes just improved readability
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

ALTARCH is no longer used by any arch(*) so drop
support for this from Makefile.headerinst

Dropping ALTARCH support simplifies Makefile.headerinst

(*) sparc64 uses it but work is ongoing to drop it
and no furter usage is planned.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: David Miller <davem@davemloft.net>

unifdef utility is fast enough to warrant that we always
run the scripts through unifdef.

This patch runs all headers listed with header-y and unifdef-y
through unifdef.
Next step is to drop unifdef-y in all Kbuild files and
that can now be done in smaller steps.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Adrian Bunk <bunk@kernel.org>

o Use lower case for local variables
o Add a helper target for common targets
o Use $(hdr-inst)= ... to make Make invocations simpler
o Add -rR to make invocations

In total this adds more lines than it removes but the
benefit is better readability
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Cc: David Woodhouse <dwmw2@infradead.org>

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (34 commits)
  powerpc: Wireup new syscalls
  Move update_mmu_cache() declaration from tlbflush.h to pgtable.h
  powerpc/pseries: Remove kmalloc call in handling writes to lparcfg
  powerpc/pseries: Update arch vector to indicate support for CMO
  ibmvfc: Add support for collaborative memory overcommit
  ibmvscsi: driver enablement for CMO
  ibmveth: enable driver for CMO
  ibmveth: Automatically enable larger rx buffer pools for larger mtu
  powerpc/pseries: Verify CMO memory entitlement updates with virtual I/O
  powerpc/pseries: vio bus support for CMO
  powerpc/pseries: iommu enablement for CMO
  powerpc/pseries: Add CMO paging statistics
  powerpc/pseries: Add collaborative memory manager
  powerpc/pseries: Utilities to set firmware page state
  powerpc/pseries: Enable CMO feature during platform setup
  powerpc/pseries: Split retrieval of processor entitlement data into a helper routine
  powerpc/pseries: Add memory entitlement capabilities to /proc/ppc64/lparcfg
  powerpc/pseries: Split processor entitlement retrieval and gathering to helper routines
  powerpc/pseries: Remove extraneous error reporting for hcall failures in lparcfg
  powerpc: Fix compile error with binutils 2.15
  ...

Fixed up conflict in arch/powerpc/platforms/52xx/Kconfig manually.

* 'linux-next' of git://git.infradead.org/~dedekind/ubi-2.6: (22 commits)
  UBI: always start the background thread
  UBI: fix gcc warning
  UBI: remove pre-sqnum images support
  UBI: fix kernel-doc errors and warnings
  UBI: fix checkpatch.pl errors and warnings
  UBI: bugfix - do not torture PEB needlessly
  UBI: rework scrubbing messages
  UBI: implement multiple volumes rename
  UBI: fix and re-work debugging stuff
  UBI: amend commentaries
  UBI: fix error message
  UBI: improve mkvol request validation
  UBI: add ubi_sync() interface
  UBI: fix 64-bit calculations
  UBI: fix LEB locking
  UBI: fix memory leak on error path
  UBI: do not forget to free internal volumes
  UBI: fix memory leak
  UBI: avoid unnecessary division operations
  UBI: fix buffer padding
  ...

The new type checking of the flags arguments to irqsave and friends
(commit 3f307891) pointed out this thing
with a big nice warning.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Convert PCI err device from platform to open firmware of_dev to comply
with powerpc schemes.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NDave Jiang <djiang@mvista.com>
Signed-off-by: NDoug Thompson <dougthompson@xmission.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fixup of missing bit 0 on 64360 PCIx_ERR_MASK and errata FEr-#11 and
FEr-#16 for the 64460.  Bit 0 must remain 0.
Signed-off-by: NDave Jiang <djiang@mvista.com>
Signed-off-by: Doug Thompson <dougthompson.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Update get_property() call to use of_get_property() in order to fix compile
Signed-off-by: NDave Jiang <djiang@mvista.com>
Signed-off-by: Doug Thompson <dougthompson.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This module harvests more than just memory errors, it also harvests
various bus and dma errors that the Chipset detects.  Previously, it would
report all such errors, which would cause output to be TOO loud.

This patches therefore adds a parameter which is used to turn off
NON-MEMORY error reports by default.  Or the reporting can be enabled via
the parameter

Also did code style cleanup: less than 80 characters per line rule
Signed-off-by: NDoug Thompson <dougthompson@xmission.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The channel DIMM label does not seem to be used much in the edac code.
However, where it is used (in the core code), it is assumed to not have a
newline embedded.  This leaves the sysfs file newline free which looks
funny when cat'ing it.  Here we just add the trailing newline to the sysfs
chX_dimm_label output...

[Doug Thompson note: the DIMM label is one of the primary uses of EDAC.
User space daemon scripts, edac-utils@sourceforge, populate the DIMM label
fields, via /sys/devices/system/edac attributes, with the silk screen
labels of the motherboard in use.  dmidecode access BIOS tables, but BIOS
tables are well known to be incorrect and useless in these respects.
edac-utils will strip off any newlines before its use of the output, when
displaying DIMM slot silk screen labels.
Signed-off-by: NArthur Jones <ajones@riverbed.com>
Signed-off-by: NDoug Thompson <dougthompson@xmission.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Static kobjects and ksets are not supported in Linux kernel.  Convert the
mc_kset from static to dynamic.  This patch depends on my previous patch
to remove the module parameter attributes from mc...
Signed-off-by: NArthur Jones <ajones@riverbed.com>
Signed-off-by: NDoug Thompson <dougthompson@xmission.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

/sys/devices/system/edac/mc has a few files which are duplicated in
/sys/module/edac_core/parameters.  Now that all the functionality is
duplicated between these two locations, we remove the former kobject
attributes and update the documentation.
Signed-off-by: NArthur Jones <ajones@riverbed.com>
Signed-off-by: NDoug Thompson <dougthompson@xmission.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When updating the edac_mc_poll_msec module parameter from the sysfs
/sys/module/edac_core/parameters/edac_mc_poll_msec file, we don't update
the workq timers.  So that, if we move from a big poll time to a small
one, the small one won't take effect until the big one has timed out.

Here we provide a new module parameter set method to call out to the
update routine.  This brings the /sys/module/edac_core/parameters
functionality up to that provided by the /sys/drivers/system/edac/mc sysfs
module parameter files so that we can remove them or at least link to the
/sys/module files...
Signed-off-by: NArthur Jones <ajones@riverbed.com>
Signed-off-by: NDoug Thompson <dougthompson@xmission.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Static kobjects are not supported in linux kernel.  Convert the
edac_pci_top_main_kobj from static to dynamic.  This avoids the double
free of the edac_pci_top_main_kobj.name that we see on module reload of
the e752x edac driver (and probably others as well).

In addition Greg KH <greg@kroah.com> has pointed out that this code may be
cleaned up significantly.  I will look at that as a follow-on patch, for
now, I just want the minimum fix to get this double-free oops bug
squashed...

Many thanks to Greg KH for his patience in showing me what the
Documentation/kobject.txt already said (oops)...
Signed-off-by: NArthur Jones <ajones@riverbed.com>
Signed-off-by: NDoug Thompson <dougthompson@xmission.com>
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Some code cleanliness issues found by Andrew Morton (thanks!) which should
not affect functionality, but which should help make the code more
maintainable.

In particular, we now:

* convert all #define's w/ a parameter to static inlines
* use 1UL rather than 1ULL when calculating an unsigned long
* use pci_disable_device

The resulting code is tested and seems to work fine...
Signed-off-by: NArthur Jones <ajones@riverbed.com>
Cc: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Explicitly unmask ECC errors we are interested in reporting.
Signed-off-by: NArthur Jones <ajones@riverbed.com>
Signed-off-by: NDoug Thompson <dougthompson@xmission.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It is possible that the BIOS did not enable ECC at boot time.  We check
for that case and fail to load if it is true.
Signed-off-by: NArthur Jones <ajones@riverbed.com>
Signed-off-by: NDoug Thompson <dougthompson@xmission.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The error mask we use to trigger ECC notifications is missing many bits of
interest.  We add these bits here so that all possible ECC errors can be
reported.
Signed-off-by: NArthur Jones <ajones@riverbed.com>
Signed-off-by: NDoug Thompson <dougthompson@xmission.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Preliminary support for the Intel 5100 MCH.  CE and UE errors are reported
along with the current DIMM label information and other memory parameters.

Reasons why this is preliminary:

1) This chip has 2 independent memory controllers which, for best
   perforance, use interleaved accesses to the DDR2 memory.  This
   architecture does not map very well to the current edac data structures
   which depend on symmetric channel access to the interleaved data.
   Without core changes, the best I could do for now is to map both memory
   controllers to different csrows (first all ranks of controller 0, then
   all ranks of controller 1).  Someone much more familiar with the edac
   core than I will probably need to come up with a more general data
   structure to handle the interleaving and de-interleaving of the two
   memory controllers.

2) I have not yet tackled the de-interleaving of the rank/controller
   address space into the physical address space of the CPU.  There is
   nothing fundamentally missing, it is just ending up to be a lot of
   code, and I'd rather keep it separate for now, esp since it doesn't
   work yet...

3) The code depends on a particular i5100 chip select to DIMM mainboard
   chip select mapping.  This mapping seems obvious to me in order to
   support dual and single ranked memory, but it is not unique and DIMM
   labels could be wrong on other mainboards.  There is no way to query
   this mapping that I know of.

4) The code requires that the i5100 is in 32GB mode.  Only 4 ranks per
   controller, 2 ranks per DIMM are supported.  I do not have hardware
   (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks
   per controller) mode.

5) The serial presence detect code should be broken out into a "real"
   i2c driver so that decode-dimms.pl can work.
Signed-off-by: NArthur Jones <ajones@riverbed.com>
Signed-off-by: NDoug Thompson <dougthompson@xmission.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If fuse filesystem doesn't define it's own lock operations, then allow the
lock manager to work with fuse.

Adding lockd support for remote locking is also possible, but more rarely
used, so leave it till later.
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: David Teigland <teigland@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Implement the get_parent export operation by sending a LOOKUP request with
".." as the name.

Implement looking up an inode by node ID after it has been evicted from
the cache.  This is done by seding a LOOKUP request with "." as the name
(for all file types, not just directories).

The filesystem can set the FUSE_EXPORT_SUPPORT flag in the INIT reply, to
indicate that it supports these special lookups.

Thanks to John Muir for the original implementation of this feature.
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: David Teigland <teigland@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add a new helper function which sends a LOOKUP request with the supplied
name.  This will be used by the next patch to send special LOOKUP requests
with "." and ".." as the name.
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Implement export_operations, to allow fuse filesystems to be exported to
NFS.  This feature has been in the out-of-tree fuse module, and is widely
used and tested.

It has not been originally merged into mainline, because doing the NFS
export in userspace was thought to be a cleaner and more efficient way of
doing it, than through the kernel.

While that is true, it would also have involved a lot of duplicated effort
at reimplementing NFS exporting (all the different versions of the
protocol).  This effort was unfortunately not undertaken by anyone, so we
are left with doing it the easy but less efficient way.

If this feature goes in, the out-of-tree fuse module can go away,
which would have several advantages:

  - not having to maintain two versions
  - less confusion for users
  - no bugs due to kernel API changes

Comment from hch:
 - Use the same fh_type values as XFS, since we use the same fh encoding.
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use d_splice_alias() instead of d_add() in fuse lookup code, to allow NFS
exporting.
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Allow filesystem's ->lock() method to call posix_lock_file() instead of
posix_lock_file_wait(), and return FILE_LOCK_DEFERRED.  This makes it
possible to implement a such a ->lock() function, that works with the lock
manager, which needs the call to be asynchronous.

Now the vfs_lock_file() helper can be used, so this is a cleanup as well.
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: David Teigland <teigland@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Extract common code into a function.
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: David Teigland <teigland@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use a special error value FILE_LOCK_DEFERRED to mean that a locking
operation returned asynchronously.  This is returned by

  posix_lock_file() for sleeping locks to mean that the lock has been
  queued on the block list, and will be woken up when it might become
  available and needs to be retried (either fl_lmops->fl_notify() is
  called or fl_wait is woken up).

  f_op->lock() to mean either the above, or that the filesystem will
  call back with fl_lmops->fl_grant() when the result of the locking
  operation is known.  The filesystem can do this for sleeping as well
  as non-sleeping locks.

This is to make sure, that return values of -EAGAIN and -EINPROGRESS by
filesystems are not mistaken to mean an asynchronous locking.

This also makes error handling in fs/locks.c and lockd/svclock.c slightly
cleaner.
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: David Teigland <teigland@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix nlm_fopen() to return NLM_FAILED (or NLM_LCK_DENIED_NOLOCKS) instead
of NLM_LCK_DENIED.  The latter means the lock request failed because of a
conflicting lock (i.e.  a temporary error), which is wrong in this case.

Also fix the client to return ENOLCK instead of EAGAIN if a blocking lock
request returns with NLM_LOCK_DENIED.
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: David Teigland <teigland@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Cc: Shailabh Nagar <nagar@watson.ibm.com>
Signed-off-by: NVegard Nossum <vegard.nossum@gmail.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Update document and make getdelays.c show delay accounting for memory reclaim.

For making a distinction between "swapping in pages" and "memory reclaim"
in getdelays.c, MEM is changed to SWAP.
Signed-off-by: NKeika Kobayashi <kobayashi.kk@ncos.nec.co.jp>
Acked-by: NBalbir Singh <balbir@linux.vnet.ibm.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add members for memory reclaim delay to taskstats, and accumulate them in
__delayacct_add_tsk() .
Signed-off-by: NKeika Kobayashi <kobayashi.kk@ncos.nec.co.jp>
Cc: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Sometimes, application responses become bad under heavy memory load.
Applications take a bit time to reclaim memory.  The statistics, how long
memory reclaim takes, will be useful to measure memory usage.

This patch adds accounting memory reclaim to per-task-delay-accounting for
accounting the time of do_try_to_free_pages().

<i.e>

- When System is under low memory load,
  memory reclaim may not occur.

$ free
             total       used       free     shared    buffers     cached
Mem:       8197800    1577300    6620500          0       4808    1516724
-/+ buffers/cache:      55768    8142032
Swap:     16386292          0   16386292

$ vmstat 1
procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu----
 r  b   swpd   free   buff  cache   si   so    bi    bo   in   cs us sy id wa
 0  0      0 5069748  10612 3014060    0    0     0     0    3   26  0  0 100  0
 0  0      0 5069748  10612 3014060    0    0     0     0    4   22  0  0 100  0
 0  0      0 5069748  10612 3014060    0    0     0     0    3   18  0  0 100  0

Measure the time of tar command.

$ ls -s test.dat
1501472 test.dat

$ time tar cvf test.tar test.dat
real    0m13.388s
user    0m0.116s
sys     0m5.304s

$ ./delayget -d -p <pid>
CPU             count     real total  virtual total    delay total
                  428     5528345500     5477116080       62749891
IO              count    delay total
                  338     8078977189
SWAP            count    delay total
                    0              0
RECLAIM         count    delay total
                    0              0

- When system is under heavy memory load
  memory reclaim may occur.

$ vmstat 1
procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu----
 r  b   swpd   free   buff  cache   si   so    bi    bo   in   cs us sy id wa
 0  0 7159032  49724   1812   3012    0    0     0     0    3   24  0  0 100  0
 0  0 7159032  49724   1812   3012    0    0     0     0    4   24  0  0 100  0
 0  0 7159032  49848   1812   3012    0    0     0     0    3   22  0  0 100  0

In this case, one process uses more 8G memory
by execution of malloc() and memset().

$ time tar cvf test.tar test.dat
real    1m38.563s        <-  increased by 85 sec
user    0m0.140s
sys     0m7.060s

$ ./delayget -d -p <pid>
CPU             count     real total  virtual total    delay total
                 9021     7140446250     7315277975      923201824
IO              count    delay total
                 8965    90466349669
SWAP            count    delay total
                    3       21036367
RECLAIM         count    delay total
                  740    61011951153

In the later case, the value of RECLAIM is increasing.
So, taskstats can show how much memory reclaim influences TAT.
Signed-off-by: NKeika Kobayashi <kobayashi.kk@ncos.nec.co.jp>
Acked-by: NBalbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujistu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix bacct_add_tsk()'s use of do_div() on an s64 by making ac_etime a u64
instead and dividing that.

Possibly this should be guarded lest the interval calculation turn up
negative, but the possible negativity of the result of the division is
cast away, and it shouldn't end up negative anyway.

This was introduced by patch f3cef7a9.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Cc: Jay Lan <jlan@engr.sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Report per-thread I/O statistics in /proc/pid/task/tid/io and aggregate
parent I/O statistics in /proc/pid/io.  This approach follows the same
model used to account per-process and per-thread CPU times.

As a practial application, this allows for example to quickly find the top
I/O consumer when a process spawns many child threads that perform the
actual I/O work, because the aggregated I/O statistics can always be found
in /proc/pid/io.

[ Oleg Nesterov points out that we should check that the task is still
  alive before we iterate over the threads, but also says that we can do
  that fixup on top of this later.  - Linus ]
Acked-by: NBalbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: NAndrea Righi <righi.andrea@gmail.com>
Cc: Matt Heaton <matt@hostmonster.com>
Cc: Shailabh Nagar <nagar@watson.ibm.com>
Acked-by-with-comments: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix the one describing what this function is and add one more - about
locking absence around pid namespaces loop.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>