pci_device_to_OF_node() can return null, and list_for_each_entry will
never enter the loop when dev is NULL, so it looks like this test is
a typo.
Reported-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Commit e32e78c5
(powerpc: fix build with make 3.82) introduced a
typo in uImage target and broke building uImage:

make: *** No rule to make target `uImage'.  Stop.
Signed-off-by: NAnatolij Gustschin <agust@denx.de>
Cc: stable <stable@kernel.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

As early setup calls down to slb_initialize(), we must have kstack
initialised before checking "should we add a bolted SLB entry for our kstack?"

Failing to do so means stack access requires an SLB miss exception to refill
an entry dynamically, if the stack isn't accessible via SLB(0) (kernel text
& static data).  It's not always allowable to take such a miss, and
intermittent crashes will result.

Primary CPUs don't have this issue; an SLB entry is not bolted for their
stack anyway (as that lives within SLB(0)).  This patch therefore only
affects the init of secondaries.
Signed-off-by: NMatt Evans <matt@ozlabs.org>
Cc: stable <stable@kernel.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

When looking at some issues with the virtual ethernet driver I noticed
that TCE allocation was following a very strange pattern:

address 00e9000 length 2048
address 0409000 length 2048 <-----
address 0429000 length 2048
address 0449000 length 2048
address 0469000 length 2048
address 0489000 length 2048
address 04a9000 length 2048
address 04c9000 length 2048
address 04e9000 length 2048
address 4009000 length 2048 <-----
address 4029000 length 2048

Huge unexplained gaps in what should be an empty TCE table. It turns out
it_blocksize, the amount we want to align the next allocation to, was
c0000000fe903b20. Completely bogus.

Initialise it to something reasonable in the VIO IOMMU code, and use kzalloc
everywhere to protect against this when we next add a non compulsary
field to iommu code and forget to initialise it.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

I'm sick of seeing ppc64_runlatch_off in our profiles, so inline it
into the callers. To avoid a mess of circular includes I didn't add
it as an inline function.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Acked-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The 'smt_enabled=X' boot option does not handle values of X > 2.
For Power 7 processors with smt modes of 0,1,2,3, and 4 this does
not work.  This patch allows the smt_enabled option to be set to
any value limited to a max equal to the number of threads per
core.
Signed-off-by: NNathan Fontenot <nfont@austin.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

All IRQs are migrated away from a CPU that is being offlined so the
following messages suggest a problem when the system is behaving as
designed:

IRQ 262 affinity broken off cpu 1
IRQ 17 affinity broken off cpu 0
IRQ 18 affinity broken off cpu 0
IRQ 19 affinity broken off cpu 0
IRQ 256 affinity broken off cpu 0
IRQ 261 affinity broken off cpu 0
IRQ 262 affinity broken off cpu 0

Don't print these messages when the CPU is not online.
Signed-off-by: NDarren Hart <dvhltc@us.ibm.com>
Acked-by: NWill Schmidt <will_schmidt@vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Nathan Fontenot <nfont@austin.ibm.com>
Cc: Robert Jennings <rcj@linux.vnet.ibm.com>
Cc: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

During CPU offline/online tests __cpu_up would flood the logs with
the following message:

Processor 0 found.

This provides no useful information to the user as there is no context
provided, and since the operation was a success (to this point) it is expected
that the CPU will come back online, providing all the feedback necessary.

Change the "Processor found" message to DBG() similar to other such messages in
the same function. Also, add an appropriate log level for the "Processor is
stuck" message.
Signed-off-by: NDarren Hart <dvhltc@us.ibm.com>
Acked-by: NWill Schmidt <will_schmidt@vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Nathan Fontenot <nfont@austin.ibm.com>
Cc: Robert Jennings <rcj@linux.vnet.ibm.com>
Cc: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

start_secondary() is called shortly after _start and also via

cpu_idle()->cpu_die()->pseries_mach_cpu_die()

start_secondary() expects a preempt_count() of 0. pseries_mach_cpu_die() is
called via the cpu_idle() routine with preemption disabled, resulting in the
following repeating message during rapid cpu offline/online tests
with CONFIG_PREEMPT=y:

BUG: scheduling while atomic: swapper/0/0x00000002
Modules linked in: autofs4 binfmt_misc dm_mirror dm_region_hash dm_log [last unloaded: scsi_wait_scan]
Call Trace:
[c00000010e7079c0] [c0000000000133ec] .show_stack+0xd8/0x218 (unreliable)
[c00000010e707aa0] [c0000000006a47f0] .dump_stack+0x28/0x3c
[c00000010e707b20] [c00000000006e7a4] .__schedule_bug+0x7c/0x9c
[c00000010e707bb0] [c000000000699d9c] .schedule+0x104/0x800
[c00000010e707cd0] [c000000000015b24] .cpu_idle+0x1c4/0x1d8
[c00000010e707d70] [c0000000006aa1b4] .start_secondary+0x398/0x3d4
[c00000010e707e30] [c000000000008278] .start_secondary_resume+0x10/0x14

Move the cpu_die() call inside the existing preemption enabled block of
cpu_idle(). This is safe as the idle task is affined to a single CPU so the
debug_smp_processor_id() tests (from cpu_should_die()) won't trigger as we are
in a "migration disabled" region.
Signed-off-by: NDarren Hart <dvhltc@us.ibm.com>
Acked-by: NWill Schmidt <will_schmidt@vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Nathan Fontenot <nfont@austin.ibm.com>
Cc: Robert Jennings <rcj@linux.vnet.ibm.com>
Cc: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

list_for_each_entry binds its first argument to a non-null value, and thus
any null test on the value of that argument is superfluous.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
iterator I;
expression x,E,E1,E2;
statement S,S1,S2;
@@

I(x,...) { <...
- if (x != NULL || ...)
  S
  ...> }
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

for_each_node_by_name binds its first argument to a non-null value, and
thus any null test on the value of that argument is superfluous.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
iterator I;
expression x,E;
@@

I(x,...) { <...
(
- (x != NULL) &&
  E
  ...> }
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

for_each_node_by_name only exits when its first argument is NULL, and a
subsequent call to of_node_put on that argument is unnecessary.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
iterator name for_each_node_by_name;
expression np,E;
identifier l;
@@

for_each_node_by_name(np,...) {
  ... when != break;
      when != goto l;
}
... when != np = E
- of_node_put(np);
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Reviewed-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

During kdump we run the crash handlers first then stop all other CPUs.
We really want to stop all CPUs as close to the fail as possible and also
have a very controlled environment for running the crash handlers, so it
makes sense to reverse the order.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Acked-by: NMatt Evans <matt@ozlabs.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The code is wrapped in an #if 0, but it's wrong so we may as well fix it.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Use is_32bit_task() helper to test 32 bit binary.
Signed-off-by: NDenis Kirjanov <dkirjanov@kernel.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Some modules (like eHCA) want to map all of kernel memory, for this to
work with a relocated kernel, we need to export kernstart_addr so
modules can use PHYSICAL_START and memstart_addr so they could use
MEMORY_START.  Note that the 32bit code already exports these symbols.
Signed-off-By: NSonny Rao <sonnyrao@us.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This makes the 64-bit kernel use 64-bit signed integers for the counter
(effectively supporting 32-bit of active count in the semaphore), thus
avoiding things like overflow of the mmap_sem if you use a really crazy
number of threads

Note: Ideally the type in the structure should be atomic_long_t rather
than "long". However, there's some nasty issues with that. It needs to
be initialized statically -and- lib/rwsem.c does things like

        sem->count = RWSEM_UNLOCKED_VALUE;

Now, if you mix in the fact that atomic_* types are actually structures
with one member and note typedefs of a scalar, it makes its really nasty.

So I stuck to what we did before using a long and casts for now.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (27 commits)
  netfilter: fix CONFIG_COMPAT support
  isdn/avm: fix build when PCMCIA is not enabled
  header: fix broken headers for user space
  e1000e: don't check for alternate MAC addr on parts that don't support it
  e1000e: disable ASPM L1 on 82573
  ll_temac: Fix poll implementation
  netxen: fix a race in netxen_nic_get_stats()
  qlnic: fix a race in qlcnic_get_stats()
  irda: fix a race in irlan_eth_xmit()
  net: sh_eth: remove unused variable
  netxen: update version 4.0.74
  netxen: fix inconsistent lock state
  vlan: Match underlying dev carrier on vlan add
  ibmveth: Fix opps during MTU change on an active device
  ehea: Fix synchronization between HW and SW send queue
  bnx2x: Update bnx2x version to 1.52.53-4
  bnx2x: Fix PHY locking problem
  rds: fix a leak of kernel memory
  netlink: fix compat recvmsg
  netfilter: fix userspace header warning
  ...

Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86:
  hp-wmi: Fix query interface
  ACPI_TOSHIBA needs LEDS support

* 'for-upstream/pvhvm' of git://xenbits.xensource.com/people/ianc/linux-2.6:
  xen: pvhvm: make it clearer that XEN_UNPLUG_* define bits in a bitfield
  xen: pvhvm: rename xen_emul_unplug=ignore to =unnnecessary
  xen: pvhvm: allow user to request no emulated device unplug

* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
  setlocalversion: Ignote SCMs above the linux source tree
  makefile: not need to regenerate kernel.release file when make kernelrelease
  fixes for using make 3.82
  kconfig: fix segfault when detecting recursive dependency
  kconfig: fix savedefconfig with choice marked optional

* 'drm-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (33 commits)
  drm/radeon/kms: fix typo in radeon_compute_pll_gain
  drm/radeon/kms: try to detect tv vs monitor for underscan
  drm/radeon/kms: fix sideport detection on newer rs880 boards
  drm/radeon: fix passing wrong type to gem object create.
  drm/radeon/kms: set encoder type to DVI for HDMI on evergreen
  drm/radeon/kms: add back missing break in info ioctl
  drm/radeon/kms: don't enable MSIs on AGP boards
  drm/radeon/kms: fix agp mode setup on cards that use pcie bridges
  drm: move dereference below check
  drm: fix end of loop test
  drm/radeon/kms: rework radeon_dp_detect() logic
  drm/radeon/kms: add missing asic callback assignment for evergreen
  drm/radeon/kms/DCE3+: switch pads to ddc mode when going i2c
  drm/radeon/kms/pm: bail early if nothing's changing
  drm/radeon/kms/atom: clean up dig atom handling
  drm/radeon/kms: DCE3/4 transmitter fixes
  drm/radeon/kms: rework encoder handling
  drm/radeon/kms: DCE3/4 AdjustPixelPll updates
  drm/radeon: Fix stack data leak
  drm/radeon/kms: fix GTT/VRAM overlapping test
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin:
  Blackfin: wire up new fanotify/prlimit64 syscalls
  ADI/ASoC: add MAINTAINERS entries
  Blackfin: fix hweight breakage

commit f3c5c1bf
(netfilter: xtables: make ip_tables reentrant) forgot to
also compute the jumpstack size in the compat handlers.

Result is that "iptables -I INPUT -j userchain" turns into -j DROP.

Reported by Sebastian Roesner on #netfilter, closes
http://bugzilla.netfilter.org/show_bug.cgi?id=669.

Note: arptables change is compile-tested only.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Acked-by: NEric Dumazet <eric.dumazet@gmail.com>
Tested-by: NMikael Pettersson <mikpe@it.uu.se>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The machines I have appear to provide their return value in the arguments
structure, not the output structure. Rework the driver to use that again
in order to get rfkill working again.
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Don't ask how ACPI_TOSHIBA got enabled on in desktop system's .config -
I don't know.  But it has silently been there until I tried 2.6.36-rc2,
where it broke the build because I don't have LED support turned on.
Attached patch fixes things up.

(I had to change BACKLIGHT_CLASS_DEVICE to "depends" because otherwise
I get unsightly core dumps out of scripts/kconfig/conf).

jon

--
toshiba: make sure we pull in LED support

The Toshiba extras driver uses the LED module, so make sure we have it
configure in.
Signed-off-by: NJonathan Corbet <corbet@lwn.net>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

dev_name always dereferences its argument, so it should not be called if
the argument is NULL.  The function indeed later tests the argument for
being NULL.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

  // <smpl>
  @@
  expression dev,E;
  @@

  *dev_name(dev)
  ... when != dev = E
  (
  *dev == NULL
  |
  *dev != NULL
  )
  // </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'misc' of git://git.kernel.dk/linux-2.6-block:
  ipheth: add support for iPhone 4

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ASoC: i.MX ssi: use SSI_STCCR in synchronous mode
  ALSA: hda - Add support for Lenovo S10-3t
  ALSA: hda - Fix stream and channel-ids codec-bus wide
  ALSA: hda - Fix conflict of sticky PCM parameter in HDMI codecs
  ALSA: intel8x0: Mute External Amplifier by default for ThinkPad X31
  ALSA: hda - Fix build error with CONFIG_PROC_FS=n
  ALSA: hda - Add support for IDT 92HD89XX codecs

In synchronous mode the SSI_SRCCR values are ignored. Instead
SSI_STCCR must be used for both receiving and transmitting.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NDave Kleikamp <shaggy@linux.vnet.ibm.com>
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>

The interrupt stacks need to be indexed by the physical cpu since the
critical, debug and machine check handlers use the contents of SPRN_PIR to
index the critirq_ctx, dbgirq_ctx, and mcheckirq_ctx arrays.
Signed-off-by: NDave Kleikamp <shaggy@linux.vnet.ibm.com>
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>

There are two entries for .cpu_user_features in
arch/powerpc/kernel/cputable.c.  Remove the one that doesn't belong
Signed-off-by: NDave Kleikamp <shaggy@linux.vnet.ibm.com>
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>

Clear the machine check syndrom register before enabling machine check
interrupts.  The initial state of the tlb can lead to parity errors being
flagged early after a cold boot.
Signed-off-by: NDave Kleikamp <shaggy@linux.vnet.ibm.com>
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>

Device tree update for the Applied micro processor 460ex on-chip SATA
Signed-off-by: NRupjyoti Sarmah <rsarmah@amcc.com>
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>

by defining in terms of (1<<N).

XEN_UNPLUG_UNNECESSARY and XEN_UNPLUG_NEVER are only used within the
kernel and are not defined as a bit on the unplug IO port. Therefore
use a bit which is outside the potentially valid range of the 16 bit
IO port.
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Acked-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Acked-by: NStefano Stabellini <Stefano.Stabellini@eu.citrix.com>

It is not immediately clear what this option causes to become
ignored. The actual meaning is that it is not necessary to unplug the
emulated devices to safely use the PV ones, even if the platform does
not support the unplug protocol. (pressumably the user will only add
this option if they have ensured that their domain configuration is
safe).

I think xen_emul_unplug=unnecessary better captures this.
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Acked-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Acked-by: NStefano Stabellini <Stefano.Stabellini@eu.citrix.com>

this allows the user to disable pvhvm and revert to emulated devices
in case of a system misconfiguration (e.g. initramfs with only
emulated drivers in it).
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Acked-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Acked-by: NStefano Stabellini <Stefano.Stabellini@eu.citrix.com>