- 04 10月, 2016 1 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull power management updates from Rafael Wysocki: "Traditionally, cpufreq is the area with the greatest number of changes, but there are fewer of them than last time. There also is some activity in the generic power domains and the devfreq frameworks, a couple of system suspend and hibernation fixes and some assorted changes in other places. One new feature is the cpufreq change to allow the scheduler to pass hints to the governors' utilization update callbacks and some code rework based on that. Another one is the support for domain removal in the generic power domains framework. Also it is now possible to use hibernation with PAGE_POISONING_ZERO enabled and devfreq supports the RockChip DFI controller and the rk3399 DMC. The rest of the changes is mostly fixes and cleanups in a number of places. Specifics: - Add a mechanism for passing hints from the scheduler to cpufreq governors via their utilization update callbacks and use it to introduce "IOwait boosting" into the schedutil governor and intel_pstate that will make them boost performance if the enqueued task was previously waiting on I/O (Rafael Wysocki). - Fix a schedutil governor problem that causes it to overestimate utilization if SMT is in use (Steve Muckle). - Update defconfigs trying to use the schedutil governor as a module which is not possible any more (Javier Martinez Canillas). - Update the intel_pstate's pstate_sample tracepoint to take "IOwait boosting" into account (Srinivas Pandruvada). - Fix a problem in the cpufreq core causing it to mishandle the initialization of CPUs registered after the cpufreq driver (Viresh Kumar, Rafael Wysocki). - Make the cpufreq-dt driver support per-policy governor tunables, clean it up and update its Kconfig description (Viresh Kumar). - Add support for more ARM platforms to the cpufreq-dt driver (Chanwoo Choi, Dave Gerlach, Geert Uytterhoeven). - Make the cpufreq CPPC driver report frequencies in KHz to avoid user space compatiblility issues (Al Stone, Hoan Tran). - Clean up a few cpufreq drivers (st, kirkwood, SCPI) a bit (Colin Ian King, Markus Elfring). - Constify some local structures in the intel_pstate driver (Julia Lawall). - Add a Documentation/cpu-freq/ entry to MAINTAINERS (Jean Delvare). - Add support for PM domain removal to the generic power domains (genpd) framework, add new DT helper functions to it and make it always enable debugfs support if available (Jon Hunter, Tomeu Vizoso). - Clean up the generic power domains (genpd) framework and make it avoid measuring power-on and power-off latencies during system-wide PM transitions (Ulf Hansson). - Add support for the RockChip DFI controller and the rk3399 DMC to the devfreq framework (Lin Huang, Axel Lin, Arnd Bergmann). - Add COMPILE_TEST to the devfreq framework (Krzysztof Kozlowski, Stephen Rothwell). - Fix a minor issue in the exynos-ppmu devfreq driver and fix up devfreq Kconfig indentation style (Wei Yongjun, Jisheng Zhang). - Fix the system suspend interface to make suspend-to-idle work if platform suspend operations have not been registered (Sudeep Holla). - Make it possible to use hibernation with PAGE_POISONING_ZERO enabled (Anisse Astier). - Increas the default timeout of the system suspend/resume watchdog and make it depend on EXPERT (Chen Yu). - Make the operating performance points (OPP) framework avoid using OPPs that aren't supported by the platform and fix a build warning in it (Dave Gerlach, Arnd Bergmann). - Fix the ARM cpuidle driver's return value (Christophe Jaillet). - Make the SmartReflex AVS (Adaptive Voltage Scaling) driver use more common logging style (Joe Perches)" * tag 'pm-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (58 commits) PM / OPP: Don't support OPP if it provides supported-hw but platform does not cpufreq: st: add missing \n to end of dev_err message cpufreq: kirkwood: add missing \n to end of dev_err messages PM / Domains: Rename pm_genpd_sync_poweron|poweroff() PM / Domains: Don't measure latency of ->power_on|off() during system PM PM / Domains: Remove redundant system PM callbacks PM / Domains: Simplify detaching a device from its genpd PM / devfreq: rk3399_dmc: Remove explictly regulator_put call in .remove PM / devfreq: rockchip: add PM_DEVFREQ_EVENT dependency PM / OPP: avoid maybe-uninitialized warning PM / Domains: Allow holes in genpd_data.domains array cpufreq: CPPC: Avoid overflow when calculating desired_perf cpufreq: ti: Use generic platdev driver cpufreq: intel_pstate: Add io_boost trace partial revert of "PM / devfreq: Add COMPILE_TEST for build coverage" cpufreq: intel_pstate: Use IOWAIT flag in Atom algorithm cpufreq: schedutil: Add iowait boosting cpufreq / sched: SCHED_CPUFREQ_IOWAIT flag to indicate iowait condition PM / Domains: Add support for removing nested PM domains by provider PM / Domains: Add support for removing PM domains ...
-
- 03 10月, 2016 8 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux由 Linus Torvalds 提交于
Pull arm64 updates from Will Deacon: "It's a bit all over the place this time with no "killer feature" to speak of. Support for mismatched cache line sizes should help people seeing whacky JIT failures on some SoCs, and the big.LITTLE perf updates have been a long time coming, but a lot of the changes here are cleanups. We stray outside arch/arm64 in a few areas: the arch/arm/ arch_timer workaround is acked by Russell, the DT/OF bits are acked by Rob, the arch_timer clocksource changes acked by Marc, CPU hotplug by tglx and jump_label by Peter (all CC'd). Summary: - Support for execute-only page permissions - Support for hibernate and DEBUG_PAGEALLOC - Support for heterogeneous systems with mismatches cache line sizes - Errata workarounds (A53 843419 update and QorIQ A-008585 timer bug) - arm64 PMU perf updates, including cpumasks for heterogeneous systems - Set UTS_MACHINE for building rpm packages - Yet another head.S tidy-up - Some cleanups and refactoring, particularly in the NUMA code - Lots of random, non-critical fixes across the board" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (100 commits) arm64: tlbflush.h: add __tlbi() macro arm64: Kconfig: remove SMP dependence for NUMA arm64: Kconfig: select OF/ACPI_NUMA under NUMA config arm64: fix dump_backtrace/unwind_frame with NULL tsk arm/arm64: arch_timer: Use archdata to indicate vdso suitability arm64: arch_timer: Work around QorIQ Erratum A-008585 arm64: arch_timer: Add device tree binding for A-008585 erratum arm64: Correctly bounds check virt_addr_valid arm64: migrate exception table users off module.h and onto extable.h arm64: pmu: Hoist pmu platform device name arm64: pmu: Probe default hw/cache counters arm64: pmu: add fallback probe table MAINTAINERS: Update ARM PMU PROFILING AND DEBUGGING entry arm64: Improve kprobes test for atomic sequence arm64/kvm: use alternative auto-nop arm64: use alternative auto-nop arm64: alternative: add auto-nop infrastructure arm64: lse: convert lse alternatives NOP padding to use __nops arm64: barriers: introduce nops and __nops macros for NOP sequences arm64: sysreg: replace open-coded mrs_s/msr_s with {read,write}_sysreg_s ...
-
由 Linus Torvalds 提交于
-
git://git.armlinux.org.uk/~rmk/linux-arm由 Linus Torvalds 提交于
Pull ARM fixes from Russell King: "Three relatively small fixes for ARM: - Roger noticed that dma_max_pfn() was calculating the upper limit wrongly, by adding the PFN offset of memory twice. - A fix from Robin to correct parsing of MPIDR values when the address size is larger than one BE32 unit. - A fix from Srinivas to ensure that we do not rely on the boot loader (or previous Linux kernel) setting the translation table base register a certain way in the decompressor, which can lead to crashes" * 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8618/1: decompressor: reset ttbcr fields to use TTBR0 on ARMv7 ARM: 8617/1: dma: fix dma_max_pfn() ARM: 8616/1: dt: Respect property size when parsing CPUs
-
由 Srinivas Ramana 提交于
If the bootloader uses the long descriptor format and jumps to kernel decompressor code, TTBCR may not be in a right state. Before enabling the MMU, it is required to clear the TTBCR.PD0 field to use TTBR0 for translation table walks. The commit dbece458 ("ARM: 7501/1: decompressor: reset ttbcr for VMSA ARMv7 cores") does the reset of TTBCR.N, but doesn't consider all the bits for the size of TTBCR.N. Clear TTBCR.PD0 field and reset all the three bits of TTBCR.N to indicate the use of TTBR0 and the correct base address width. Fixes: dbece458 ("ARM: 7501/1: decompressor: reset ttbcr for VMSA ARMv7 cores") Acked-by: NRobin Murphy <robin.murphy@arm.com> Signed-off-by: NSrinivas Ramana <sramana@codeaurora.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Thomas Gleixner: "The last regression fixes for 4.8 final: - Two patches addressing the fallout of the CR4 optimizations which caused CR4-less machines to fail. - Fix the VDSO build on big endian machines - Take care of FPU initialization if no CPUID is available otherwise task struct size ends up being zero - Fix up context tracking in case load_gs_index fails" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/entry/64: Fix context tracking state warning when load_gs_index fails x86/boot: Initialize FPU and X86_FEATURE_ALWAYS even if we don't have CPUID x86/vdso: Fix building on big endian host x86/boot: Fix another __read_cr4() case on 486 x86/init: Fix cr4_init_shadow() on CR4-less machines
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linus由 Linus Torvalds 提交于
Pull MIPS fixes from Ralf Baechle: "Another round of fixes: - CM: Fix mips_cm_max_vp_width for non-MT kernels on MT systems - CPS: Avoid BUG() when offlining pre-r6 CPUs - DEC: Avoid gas warnings due to suspicious instruction scheduling by manually expanding assembler macros. - FTLB: Fix configuration by moving confiuguratoin after probing - FTLB: clear execution hazard after changing FTLB enable - Highmem: Fix detection of unsupported highmem with cache aliases - I6400: Don't touch FTLBP chicken bits - microMIPS: Fix BUILD_ROLLBACK_PROLOGUE - Malta: Fix IOCU disable switch read for MIPS64 - Octeon: Fix probing of devices attached to GPIO lines - uprobes: Misc small fixes" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: CM: Fix mips_cm_max_vp_width for non-MT kernels on MT systems MIPS: Fix detection of unsupported highmem with cache aliases MIPS: Malta: Fix IOCU disable switch read for MIPS64 MIPS: Fix BUILD_ROLLBACK_PROLOGUE for microMIPS MIPS: clear execution hazard after changing FTLB enable MIPS: Configure FTLB after probing TLB sizes from config4 MIPS: Stop setting I6400 FTLBP MIPS: DEC: Avoid la pseudo-instruction in delay slots MIPS: Octeon: mark GPIO controller node not populated after IRQ init. MIPS: uprobes: fix use of uninitialised variable MIPS: uprobes: remove incorrect set_orig_insn MIPS: fix uretprobe implementation MIPS: smp-cps: Avoid BUG() when offlining pre-r6 CPUs
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc由 Linus Torvalds 提交于
Pull sparc fixes from David Miller: 1) Fix section mismatches in some builds, from Paul Gortmaker. 2) Need to count huge zero page mappings when doing TSB sizing, from Mike Kravetz. 3) Fix handing of cpu_possible_mask when nr_cpus module option is specified, from Atish Patra. 4) Don't allocate irq stacks until nr_irqs has been processed, also from Atish Patra. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: Fix non-SMP build. sparc64: Fix irq stack bootmem allocation. sparc64: Fix cpu_possible_mask if nr_cpus is set sparc64 mm: Fix more TSB sizing issues sparc64: fix section mismatch in find_numa_latencies_for_group
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Fix wrong TCP checksums on MTU probing when checksum offloading is disabled, from Douglas Caetano dos Santos. 2) Fix qdisc backlog updates in qfq and sfb schedulers, from Cong Wang. 3) Route lookup flow key protocol value is wrong in ip6gre_xmit_other(), fix from Lance Richardson. 4) Scheduling while atomic in multicast routing code of ipv4 and ipv6, fix from Nikolay Aleksandrov. 5) Fix packet alignment in fec driver, from Eric Nelson. 6) Fix perf regression in sctp due to struct layout and cache misses, from Xin Long. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: sctp: fix the issue sctp_diag uses lock_sock in rcu_read_lock sctp: change to check peer prsctp_capable when using prsctp polices sctp: remove prsctp_param from sctp_chunk sctp: move sent_count to the memory hole in sctp_chunk tg3: Avoid NULL pointer dereference in tg3_io_error_detected() act_ife: Fix false encoding act_ife: Fix external mac header on encode VSOCK: Don't dec ack backlog twice for rejected connections Revert "net: ethernet: bcmgenet: use phydev from struct net_device" net: fec: align IP header in hardware net: fec: remove QUIRK_HAS_RACC from i.mx27 net: fec: remove QUIRK_HAS_RACC from i.mx25 ipmr, ip6mr: fix scheduling while atomic and a deadlock with ipmr_get_route ip6_gre: fix flowi6_proto value in ip6gre_xmit_other() tcp: fix a compile error in DBGUNDO() tcp: fix wrong checksum calculation on MTU probing sch_sfb: keep backlog updated with qlen sch_qfq: keep backlog updated with qlen can: dev: fix deadlock reported after bus-off
-
- 02 10月, 2016 6 次提交
-
-
由 Rafael J. Wysocki 提交于
* pm-devfreq: PM / devfreq: rk3399_dmc: Remove explictly regulator_put call in .remove PM / devfreq: rockchip: add PM_DEVFREQ_EVENT dependency partial revert of "PM / devfreq: Add COMPILE_TEST for build coverage" PM / devfreq: rockchip: add devfreq driver for rk3399 dmc Documentation: bindings: add dt documentation for rk3399 dmc PM / devfreq: event: support rockchip dfi controller Documentation: bindings: add dt documentation for dfi controller PM / devfreq: event: remove duplicate devfreq_event_get_drvdata() PM / devfreq: fix Kconfig indent style PM / devfreq: Add COMPILE_TEST for build coverage PM / devfreq: exynos-ppmu: remove unneeded of_node_put() * pm-sleep: PM / Hibernate: allow hibernation with PAGE_POISONING_ZERO PM / sleep: enable suspend-to-idle even without registered suspend_ops PM / sleep: Increase default DPM watchdog timeout to 120
-
由 Rafael J. Wysocki 提交于
* pm-cpuidle: ARM: cpuidle: Fix error return code * pm-opp: PM / OPP: Don't support OPP if it provides supported-hw but platform does not PM / OPP: avoid maybe-uninitialized warning * pm-avs: PM / AVS: SmartReflex: Neaten logging
-
由 Rafael J. Wysocki 提交于
* pm-cpufreq: (24 commits) cpufreq: st: add missing \n to end of dev_err message cpufreq: kirkwood: add missing \n to end of dev_err messages cpufreq: CPPC: Avoid overflow when calculating desired_perf cpufreq: ti: Use generic platdev driver cpufreq: intel_pstate: Add io_boost trace cpufreq: intel_pstate: Use IOWAIT flag in Atom algorithm cpufreq: schedutil: Add iowait boosting cpufreq / sched: SCHED_CPUFREQ_IOWAIT flag to indicate iowait condition cpufreq: CPPC: Force reporting values in KHz to fix user space interface cpufreq: create link to policy only for registered CPUs intel_pstate: constify local structures cpufreq: dt: Support governor tunables per policy cpufreq: dt: Update kconfig description cpufreq: dt: Remove unused code MAINTAINERS: Add Documentation/cpu-freq/ cpufreq: dt: Add support for r8a7792 cpufreq / sched: ignore SMT when determining max cpu capacity cpufreq: Drop unnecessary check from cpufreq_policy_alloc() ARM: multi_v7_defconfig: Don't attempt to enable schedutil governor as module ARM: exynos_defconfig: Don't attempt to enable schedutil governor as module ...
-
由 Rafael J. Wysocki 提交于
-
由 Rafael J. Wysocki 提交于
* pm-domains: PM / Domains: Rename pm_genpd_sync_poweron|poweroff() PM / Domains: Don't measure latency of ->power_on|off() during system PM PM / Domains: Remove redundant system PM callbacks PM / Domains: Simplify detaching a device from its genpd PM / Domains: Allow holes in genpd_data.domains array PM / Domains: Add support for removing nested PM domains by provider PM / Domains: Add support for removing PM domains PM / Domains: Store the provider in the PM domain structure PM / Domains: Prepare for adding support to remove PM domains PM / Domains: Verify the PM domain is present when adding a provider PM / Domains: Don't expose xlate and provider helper functions PM / Domains: Don't expose generic_pm_domain structure to clients staging: board: Remove calls to of_genpd_get_from_provider() ARM: EXYNOS: Remove calls to of_genpd_get_from_provider() PM / Domains: Add new helper functions for device-tree PM / Domains: Always enable debugfs support if available
-
由 Paul Burton 提交于
When discovering the number of VPEs per core, smp_num_siblings will be incorrect for kernels built without support for the MIPS MultiThreading (MT) ASE running on systems which implement said ASE. This leads to accesses to VPEs in secondary cores being performed incorrectly since mips_cm_vp_id calculates the wrong ID to write to the local "other" registers. Fix this by examining the number of VPEs in the core as reported by the CM. This patch presumes that the number of VPEs will be the same in each core of the system. As this path only applies to systems with CM version 2.5 or lower, and this property is true of all such known systems, this is likely to be fine but is described in a comment for good measure. Signed-off-by: NPaul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14338/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 01 10月, 2016 7 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi由 Linus Torvalds 提交于
Pull SCSI fix from James Bottomley: "One final fix before 4.8. There was a memory leak triggered by turning scsi mq off due to the fact that we assume on host release that the already running hosts weren't mq based because that's the state of the global flag (even though they were). Fix it by tracking this on a per host host basis" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: Avoid that toggling use_blk_mq triggers a memory leak
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
Pull input fix from Dmitry Torokhov: "One small change to make joydev (which is used by older games) to bind to devices that export Z axis but not X or Y (such as TRC rudder)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: joydev - recognize devices with Z axis as joysticks
-
由 Linus Torvalds 提交于
Merge more fixes from Andrew Morton: "Three fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: include/linux/property.h: fix typo/compile error ocfs2: fix deadlock on mmapped page in ocfs2_write_begin_nolock() mm: workingset: fix crash in shadow node shrinker caused by replace_page_cache_page()
-
由 John Youn 提交于
This fixes commit d76eebfa ("include/linux/property.h: fix build issues with gcc-4.4.4"). With that commit we get the following compile error when using the PROPERTY_ENTRY_INTEGER_ARRAY macro. include/linux/property.h:201:39: error: `u32_data' undeclared (first use in this function) PROPERTY_ENTRY_INTEGER_ARRAY(_name_, u32, _val_) ^ include/linux/property.h:193:17: note: in definition of macro `PROPERTY_ENTRY_INTEGER_ARRAY' { .pointer = { _type_##_data = _val_ } }, \ ^ This needs a '.' to reference the union member. It seems this was just overlooked here since it is done correctly in similar constructs in other parts of the original commit. This fix is in preparation of upcoming commits that will use this macro. Fixes: commit d76eebfa ("include/linux/property.h: fix build issues with gcc-4.4.4") Link: http://lkml.kernel.org/r/2de3b929290d88a723ed829a3e3cbd02044714df.1475114627.git.johnyoun@synopsys.comSigned-off-by: NJohn Youn <johnyoun@synopsys.com> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Eric Ren 提交于
The testcase "mmaptruncate" of ocfs2-test deadlocks occasionally. In this testcase, we create a 2*CLUSTER_SIZE file and mmap() on it; there are 2 process repeatedly performing the following operations respectively: one is doing memset(mmaped_addr + 2*CLUSTER_SIZE - 1, 'a', 1), while the another is playing ftruncate(fd, 2*CLUSTER_SIZE) and then ftruncate(fd, CLUSTER_SIZE) again and again. This is the backtrace when the deadlock happens: __wait_on_bit_lock+0x50/0xa0 __lock_page+0xb7/0xc0 ocfs2_write_begin_nolock+0x163f/0x1790 [ocfs2] ocfs2_page_mkwrite+0x1c7/0x2a0 [ocfs2] do_page_mkwrite+0x66/0xc0 handle_mm_fault+0x685/0x1350 __do_page_fault+0x1d8/0x4d0 trace_do_page_fault+0x37/0xf0 do_async_page_fault+0x19/0x70 async_page_fault+0x28/0x30 In ocfs2_write_begin_nolock(), we first grab the pages and then allocate disk space for this write; ocfs2_try_to_free_truncate_log() will be called if -ENOSPC is returned; if we're lucky to get enough clusters, which is usually the case, we start over again. But in ocfs2_free_write_ctxt() the target page isn't unlocked, so we will deadlock when trying to grab the target page again. Also, -ENOMEM might be returned in ocfs2_grab_pages_for_write(). Another deadlock will happen in __do_page_mkwrite() if ocfs2_page_mkwrite() returns non-VM_FAULT_LOCKED, and along with a locked target page. These two errors fail on the same path, so fix them by unlocking the target page manually before ocfs2_free_write_ctxt(). Jan Kara helps me clear out the JBD2 part, and suggest the hint for root cause. Changes since v1: 1. Also put ENOMEM error case into consideration. Link: http://lkml.kernel.org/r/1474173902-32075-1-git-send-email-zren@suse.comSigned-off-by: NEric Ren <zren@suse.com> Reviewed-by: NHe Gang <ghe@suse.com> Acked-by: NJoseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johannes Weiner 提交于
Antonio reports the following crash when using fuse under memory pressure: kernel BUG at /build/linux-a2WvEb/linux-4.4.0/mm/workingset.c:346! invalid opcode: 0000 [#1] SMP Modules linked in: all of them CPU: 2 PID: 63 Comm: kswapd0 Not tainted 4.4.0-36-generic #55-Ubuntu Hardware name: System manufacturer System Product Name/P8H67-M PRO, BIOS 3904 04/27/2013 task: ffff88040cae6040 ti: ffff880407488000 task.ti: ffff880407488000 RIP: shadow_lru_isolate+0x181/0x190 Call Trace: __list_lru_walk_one.isra.3+0x8f/0x130 list_lru_walk_one+0x23/0x30 scan_shadow_nodes+0x34/0x50 shrink_slab.part.40+0x1ed/0x3d0 shrink_zone+0x2ca/0x2e0 kswapd+0x51e/0x990 kthread+0xd8/0xf0 ret_from_fork+0x3f/0x70 which corresponds to the following sanity check in the shadow node tracking: BUG_ON(node->count & RADIX_TREE_COUNT_MASK); The workingset code tracks radix tree nodes that exclusively contain shadow entries of evicted pages in them, and this (somewhat obscure) line checks whether there are real pages left that would interfere with reclaim of the radix tree node under memory pressure. While discussing ways how fuse might sneak pages into the radix tree past the workingset code, Miklos pointed to replace_page_cache_page(), and indeed there is a problem there: it properly accounts for the old page being removed - __delete_from_page_cache() does that - but then does a raw raw radix_tree_insert(), not accounting for the replacement page. Eventually the page count bits in node->count underflow while leaving the node incorrectly linked to the shadow node LRU. To address this, make sure replace_page_cache_page() uses the tracked page insertion code, page_cache_tree_insert(). This fixes the page accounting and makes sure page-containing nodes are properly unlinked from the shadow node LRU again. Also, make the sanity checks a bit less obscure by using the helpers for checking the number of pages and shadows in a radix tree node. Fixes: 449dd698 ("mm: keep page cache radix tree nodes in check") Link: http://lkml.kernel.org/r/20160919155822.29498-1-hannes@cmpxchg.orgSigned-off-by: NJohannes Weiner <hannes@cmpxchg.org> Reported-by: NAntonio SJ Musumeci <trapexit@spawn.link> Debugged-by: NMiklos Szeredi <miklos@szeredi.hu> Cc: <stable@vger.kernel.org> [3.15+] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Javi Merino 提交于
Change my email address to my kernel.org account instead of the ARM one. Signed-off-by: NJavi Merino <javi.merino@arm.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 30 9月, 2016 18 次提交
-
-
由 Wanpeng Li 提交于
This warning: WARNING: CPU: 0 PID: 3331 at arch/x86/entry/common.c:45 enter_from_user_mode+0x32/0x50 CPU: 0 PID: 3331 Comm: ldt_gdt_64 Not tainted 4.8.0-rc7+ #13 Call Trace: dump_stack+0x99/0xd0 __warn+0xd1/0xf0 warn_slowpath_null+0x1d/0x20 enter_from_user_mode+0x32/0x50 error_entry+0x6d/0xc0 ? general_protection+0x12/0x30 ? native_load_gs_index+0xd/0x20 ? do_set_thread_area+0x19c/0x1f0 SyS_set_thread_area+0x24/0x30 do_int80_syscall_32+0x7c/0x220 entry_INT80_compat+0x38/0x50 ... can be reproduced by running the GS testcase of the ldt_gdt test unit in the x86 selftests. do_int80_syscall_32() will call enter_form_user_mode() to convert context tracking state from user state to kernel state. The load_gs_index() call can fail with user gsbase, gsbase will be fixed up and proceed if this happen. However, enter_from_user_mode() will be called again in the fixed up path though it is context tracking kernel state currently. This patch fixes it by just fixing up gsbase and telling lockdep that IRQs are off once load_gs_index() failed with user gsbase. Signed-off-by: NWanpeng Li <wanpeng.li@hotmail.com> Acked-by: NAndy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1475197266-3440-1-git-send-email-wanpeng.li@hotmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Andy Lutomirski 提交于
Otherwise arch_task_struct_size == 0 and we die. While we're at it, set X86_FEATURE_ALWAYS, too. Reported-by: NDavid Saggiorato <david@saggiorato.net> Tested-by: NDavid Saggiorato <david@saggiorato.net> Signed-off-by: NAndy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave@sr71.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Fixes: aaeb5c01c5b ("x86/fpu, sched: Introduce CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT and use it on x86") Link: http://lkml.kernel.org/r/8de723afbf0811071185039f9088733188b606c9.1475103911.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Segher Boessenkool 提交于
We need to call GET_LE to read hdr->e_type. Fixes: 57f90c3d ("x86/vdso: Error out if the vDSO isn't a valid DSO") Reported-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NSegher Boessenkool <segher@kernel.crashing.org> Acked-by: NAndy Lutomirski <luto@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: linux-next@vger.kernel.org Link: http://lkml.kernel.org/r/20160929193442.GA16617@gate.crashing.orgSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Andy Lutomirski 提交于
The condition for reading CR4 was wrong: there are some CPUs with CPUID but not CR4. Rather than trying to make the condition exact, use __read_cr4_safe(). Fixes: 18bc7bd5 ("x86/boot: Synchronize trampoline_cr4_features and mmu_cr4_features directly") Reported-by: david@saggiorato.net Signed-off-by: NAndy Lutomirski <luto@kernel.org> Reviewed-by: NBorislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Link: http://lkml.kernel.org/r/8c453a61c4f44ab6ff43c29780ba04835234d2e5.1475178369.git.luto@kernel.orgSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Xin Long 提交于
When sctp dumps all the ep->assocs, it needs to lock_sock first, but now it locks sock in rcu_read_lock, and lock_sock may sleep, which would break rcu_read_lock. This patch is to get and hold one sock when traversing the list. After that and get out of rcu_read_lock, lock and dump it. Then it will traverse the list again to get the next one until all sctp socks are dumped. For sctp_diag_dump_one, it fixes this issue by holding asoc and moving cb() out of rcu_read_lock in sctp_transport_lookup_process. Fixes: 8f840e47 ("sctp: add the sctp_diag.c file") Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Xin Long says: ==================== sctp: a bunch of fixes for prsctp polices This patchset is to fix 2 issues for prsctp polices: 1. patch 1 and 2 fix "netperf-Throughput_Mbps -37.2% regression" issue when overloading the CPU. 2. patch 3 fix "prsctp polices should check both sides' prsctp_capable, instead of only local side". ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
Now before using prsctp polices, sctp uses asoc->prsctp_enable to check if prsctp is enabled. However asoc->prsctp_enable is set only means local host support prsctp, sctp should not abandon packet if peer host doesn't enable prsctp. So this patch is to use asoc->peer.prsctp_capable to check if prsctp is enabled on both side, instead of asoc->prsctp_enable, as asoc's peer.prsctp_capable is set only when local and peer both enable prsctp. Fixes: a6c2f792 ("sctp: implement prsctp TTL policy") Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
Now sctp uses chunk->prsctp_param to save the prsctp param for all the prsctp polices, we didn't need to introduce prsctp_param to sctp_chunk. We can just use chunk->sinfo.sinfo_timetolive for RTX and BUF polices, and reuse msg->expires_at for TTL policy, as the prsctp polices and old expires policy are mutual exclusive. This patch is to remove prsctp_param from sctp_chunk, and reuse msg's expires_at for TTL and chunk's sinfo.sinfo_timetolive for RTX and BUF polices. Note that sctp can't use chunk's sinfo.sinfo_timetolive for TTL policy, as it needs a u64 variables to save the expires_at time. This one also fixes the "netperf-Throughput_Mbps -37.2% regression" issue. Fixes: a6c2f792 ("sctp: implement prsctp TTL policy") Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
Now pahole sctp_chunk, it has 2 memory holes: struct sctp_chunk { struct list_head list; atomic_t refcnt; /* XXX 4 bytes hole, try to pack */ ... long unsigned int prsctp_param; int sent_count; /* XXX 4 bytes hole, try to pack */ This patch is to move up sent_count to fill the 1st one and eliminate the 2nd one. It's not just another struct compaction, it also fixes the "netperf- Throughput_Mbps -37.2% regression" issue when overloading the CPU. Fixes: a6c2f792 ("sctp: implement prsctp TTL policy") Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Milton Miller 提交于
While the driver is probing the adapter, an error may occur before the netdev structure is allocated and attached to pci_dev. In this case, not only netdev isn't available, but the tg3 private structure is also not available as it is just math from the NULL pointer, so dereferences must be skipped. The following trace is seen when the error is triggered: [1.402247] Unable to handle kernel paging request for data at address 0x00001a99 [1.402410] Faulting instruction address: 0xc0000000007e33f8 [1.402450] Oops: Kernel access of bad area, sig: 11 [#1] [1.402481] SMP NR_CPUS=2048 NUMA PowerNV [1.402513] Modules linked in: [1.402545] CPU: 0 PID: 651 Comm: eehd Not tainted 4.4.0-36-generic #55-Ubuntu [1.402591] task: c000001fe4e42a20 ti: c000001fe4e88000 task.ti: c000001fe4e88000 [1.402742] NIP: c0000000007e33f8 LR: c0000000007e3164 CTR: c000000000595ea0 [1.402787] REGS: c000001fe4e8b790 TRAP: 0300 Not tainted (4.4.0-36-generic) [1.402832] MSR: 9000000100009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 28000422 XER: 20000000 [1.403058] CFAR: c000000000008468 DAR: 0000000000001a99 DSISR: 42000000 SOFTE: 1 GPR00: c0000000007e3164 c000001fe4e8ba10 c0000000015c5e00 0000000000000000 GPR04: 0000000000000001 0000000000000000 0000000000000039 0000000000000299 GPR08: 0000000000000000 0000000000000001 c000001fe4e88000 0000000000000006 GPR12: 0000000000000000 c00000000fb40000 c0000000000e6558 c000003ca1bffd00 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 0000000000000000 c000000000d52768 GPR24: c000000000d52740 0000000000000100 c000003ca1b52000 0000000000000002 GPR28: 0000000000000900 0000000000000000 c00000000152a0c0 c000003ca1b52000 [1.404226] NIP [c0000000007e33f8] tg3_io_error_detected+0x308/0x340 [1.404265] LR [c0000000007e3164] tg3_io_error_detected+0x74/0x340 This patch avoids the NULL pointer dereference by moving the access after the netdev NULL pointer check on tg3_io_error_detected(). Also, we add a check for netdev being NULL on tg3_io_resume() [suggested by Michael Chan]. Fixes: 0486a063 ("tg3: prevent ifup/ifdown during PCI error recovery") Fixes: dfc8f370 ("net/tg3: Release IRQs on permanent error") Tested-by: NGuilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Signed-off-by: NMilton Miller <miltonm@us.ibm.com> Signed-off-by: NGuilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Acked-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "drm fixes for final 4.8. One big regression fix for udl, along with two amdgpu fixes and two nouveau fixes. All seems pretty safe and useful" * tag 'drm-fixes-for-v4.8-final' of git://people.freedesktop.org/~airlied/linux: drm/udl: fix line iterator in damage handling drm/radeon/si/dpm: add workaround for for Jet parts drm/amdgpu: disable CRTCs before teardown drm/nouveau: Revert "bus: remove cpu_coherent flag" drm/nouveau/fifo/nv04: avoid ramht race against cookie insertion
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm由 Linus Torvalds 提交于
Pull libnvdimm fixes from Dan Williams: - Four fixes for "flush hint" support. Flush hints are addresses advertised by the ACPI 6+ NFIT (NVDIMM Firmware Interface Table) that when written and fenced guarantee that writes pending in platform write buffers (outside the cpu) have been flushed to media. They might also be used by hypervisors as a trigger condition to flush guest-persistent memory ranges to storage. Fix a potential data corruption issue, a broken definition of the hint array, a wrong allocation size for the unit test implementation of the flush hint table, and missing NULL check in an error path. The unit test, while it did not prevent these bugs from being merged, at least triggered occasional crashes in advance of production usages. - Fix handling of ACPI DSM error status results. The DSM mechanism allows communication with platform and memory device firmware. We correctly parse known errors, but were silently ignoring others. Fix it to consistently fail any command with a non-zero status return that we otherwise do not interpret / handle. * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: libnvdimm, region: fix flush hint table thinko nfit: fail DSMs that return non-zero status by default libnvdimm: fix devm_nvdimm_memremap() error path tools/testing/nvdimm: fix allocation range for mock flush hint tables nvdimm: fix PHYS_PFN/PFN_PHYS mixup
-
由 Andy Lutomirski 提交于
cr4_init_shadow() will panic on 486-like machines without CR4. Fix it using __read_cr4_safe(). Reported-by: david@saggiorato.net Signed-off-by: NAndy Lutomirski <luto@kernel.org> Reviewed-by: NBorislav Petkov <bp@suse.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Fixes: 1e02ce4c ("x86: Store a per-cpu shadow copy of CR4") Link: http://lkml.kernel.org/r/43a20f81fb504013bf613913dc25574b45336a61.1475091074.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Paul Burton 提交于
The paging_init() function contains code which detects that highmem is in use but unsupported due to dcache aliasing. However this code was ineffective because it was being run before the caches are probed, meaning that cpu_has_dc_aliases would always evaluate to false (unless a platform overrides it to a compile-time constant) and the detection of the unsupported case is never triggered. The kernel would then go on to attempt to use highmem & either hit coherency issues or trigger the BUG_ON in flush_kernel_dcache_page(). Fix this by running paging_init() later than cpu_cache_init(), such that the cpu_has_dc_aliases macro will evaluate correctly & the unsupported highmem case will be detected successfully. This then leads to a formerly hidden issue in that mem_init_free_highmem() will attempt to free all highmem pages, even though we're avoiding use of them & don't have valid page structs for them. This leads to an invalid pointer dereference & a TLB exception. Avoid this by skipping the loop in mem_init_free_highmem() if cpu_has_dc_aliases evaluates true. Signed-off-by: NPaul Burton <paul.burton@imgtec.com> Cc: Rabin Vincent <rabinv@axis.com> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Alexander Sverdlin <alexander.sverdlin@gmail.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Jaedon Shin <jaedon.shin@gmail.com> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Sergey Ryazanov <ryazanov.s.a@gmail.com> Cc: Jonas Gorski <jogo@openwrt.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14184/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Paul Burton 提交于
Malta boards used with CPU emulators feature a switch to disable use of an IOCU. Software has to check this switch & ignore any present IOCU if the switch is closed. The read used to do this was unsafe for 64 bit kernels, as it simply casted the address 0xbf403000 to a pointer & dereferenced it. Whilst in a 32 bit kernel this would access kseg1, in a 64 bit kernel this attempts to access xuseg & results in an address error exception. Fix by accessing a correctly formed ckseg1 address generated using the CKSEG1ADDR macro. Whilst modifying this code, define the name of the register and the bit we care about within it, which indicates whether PCI DMA is routed to the IOCU or straight to DRAM. The code previously checked that bit 0 was also set, but the least significant 7 bits of the CONFIG_GEN0 register contain the value of the MReqInfo signal provided to the IOCU OCP bus, so singling out bit 0 makes little sense & that part of the check is dropped. Signed-off-by: NPaul Burton <paul.burton@imgtec.com> Fixes: b6d92b4a ("MIPS: Add option to disable software I/O coherency.") Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Kees Cook <keescook@chromium.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14187/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Paul Burton 提交于
When the kernel is built for microMIPS, branches targets need to be known to be microMIPS code in order to result in bit 0 of the PC being set. The branch target in the BUILD_ROLLBACK_PROLOGUE macro was simply the end of the macro, which may be pointing at padding rather than at code. This results in recent enough GNU linkers complaining like so: mips-img-linux-gnu-ld: arch/mips/built-in.o: .text+0x3e3c: Unsupported branch between ISA modes. mips-img-linux-gnu-ld: final link failed: Bad value Makefile:936: recipe for target 'vmlinux' failed make: *** [vmlinux] Error 1 Fix this by changing the branch target to be the start of the appropriate handler, skipping over any padding. Signed-off-by: NPaul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14019/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Paul Burton 提交于
On current P-series cores from Imagination the FTLB can be enabled or disabled via a bit in the Config6 register, and an execution hazard is created by changing the value of bit. The ftlb_disable function already cleared that hazard but that does no good for other callers. Clear the hazard in the set_ftlb_enable function that creates it, and only for the cores where it applies. This has the effect of reverting c982c6d6 ("MIPS: cpu-probe: Remove cp0 hazard barrier when enabling the FTLB") which was incorrect. Signed-off-by: NPaul Burton <paul.burton@imgtec.com> Fixes: c982c6d6 ("MIPS: cpu-probe: Remove cp0 hazard barrier when enabling the FTLB") Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14023/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Paul Burton 提交于
On some cores (proAptiv, P5600) we make use of the sizes of the TLBs to determine the desired FTLB:VTLB write ratio. However set_ftlb_enable & thus calculate_ftlb_probability is called before decode_config4. This results in us calculating a probability based on zero sizes, and we end up setting FTLBP=3 for a 3:1 FTLB:VTLB write ratio in all cases. This will make abysmal use of the available FTLB resources in the affected cores. Fix this by configuring the FTLB probability after having decoded config4. However we do need to have enabled the FTLB before that point such that fields in config4 actually reflect that an FTLB is present. So set_ftlb_enable is now called twice, with flags indicating that it should configure the write probability only the second time. Signed-off-by: NPaul Burton <paul.burton@imgtec.com> Fixes: cf0a8aa0 ("MIPS: cpu-probe: Set the FTLB probability bit on supported cores") Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14022/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-