- 27 3月, 2018 40 次提交
-
-
由 Gal Pressman 提交于
The function is used in en_main.c only, we can make it static and remove its declaration from en.h Signed-off-by: NGal Pressman <galp@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-
由 Gal Pressman 提交于
ethtool core code makes sure data isn't NULL before calling get_ethtool_stats, testing it again in the driver is redundant. Signed-off-by: NGal Pressman <galp@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-
由 Leon Romanovsky 提交于
The system with CONFIG_UBSAN enabled on produces the following error during driver initialization. The reason to it that max_reg_cmds can be larger enough to cause to "1 << max_reg_cmds" overflow the unsigned long. ================================================================================ UBSAN: Undefined behaviour in drivers/net/ethernet/mellanox/mlx5/core/cmd.c:1805:42 signed integer overflow: -2147483648 - 1 cannot be represented in type 'int' CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc2-00032-g06cda2358d9b-dirty #724 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 Call Trace: dump_stack+0xe9/0x18f ? dma_virt_alloc+0x81/0x81 ubsan_epilogue+0xe/0x4e handle_overflow+0x187/0x20c mlx5_cmd_init+0x73a/0x12b0 mlx5_load_one+0x1c3d/0x1d30 init_one+0xd02/0xf10 pci_device_probe+0x26c/0x3b0 driver_probe_device+0x622/0xb40 __driver_attach+0x175/0x1b0 bus_for_each_dev+0xef/0x190 bus_add_driver+0x2db/0x490 driver_register+0x16b/0x1e0 __pci_register_driver+0x177/0x1b0 init+0x6d/0x92 do_one_initcall+0x15b/0x270 kernel_init_freeable+0x2d8/0x3d0 kernel_init+0x14/0x190 ret_from_fork+0x24/0x30 ================================================================================ Signed-off-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-
由 Or Gerlitz 提交于
Currently, we are emulating the offload of vlan push/pop actions using global setup as done by commit f5f82476 ("net/mlx5: E-Switch, Support VLAN actions in the offloads mode"). With newer NICs, we can apply a flow action for that matter, do that while keeping the emulated path for the older HW brands. Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Reviewed-by: NMark Bloch <markb@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-
由 Or Gerlitz 提交于
Newer NICs (ConnectX-5 and onward) can apply vlan pop or push as an action taking place during flow steering. Add the core bits for that. Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Reviewed-by: NMark Bloch <markb@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-
由 Or Gerlitz 提交于
Align the checks for modify header and encap actions with the rest of the code. Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Reviewed-by: NMark Bloch <markb@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-
由 Moshe Shemesh 提交于
Added the following packets drop counter: Rx interface down dropped packets - counts packets which were received while the ETH interface was down. This counter will be shown on ethtool as a new counter called rx_if_down_packets. The implementation allocates a q_counter for drop rq which gets all the received traffic while the interface is down. Signed-off-by: NMoshe Shemesh <moshe@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-
由 Moshe Shemesh 提交于
Added the following packets dropped while vport down statistics: Rx dropped while vport down - counts packets which were steered by e-switch to a vport, but dropped since the vport was down. This counter will be shown on ip link tool as part of the vport rx_dropped counter. Tx dropped while vport down - counts packets which were transmitted by a vport, but dropped due to vport logical link down. This counter will be shown on ip link tool as part of the vport tx_dropped counter. The counters are read from FW by command QUERY_VNIC_ENV. Signed-off-by: NMoshe Shemesh <moshe@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-
由 Moshe Shemesh 提交于
Added the following packets drop counter: Rx steering missed dropped packets - counts packets which were dropped due to miss on NIC rx steering rules. This counter will be shown on ethtool as a new counter called rx_steer_missed_packets. Signed-off-by: NMoshe Shemesh <moshe@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-
由 Moshe Shemesh 提交于
Add support for new FW command QUERY_VNIC_ENV. The command is used by the driver to query vnic diagnostic statistics from FW. Signed-off-by: NMoshe Shemesh <moshe@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-
由 Inbar Karmy 提交于
Implement set/get functions to configure PFC stall prevention timeout by tunables api through ethtool. By default the stall prevention timeout is configured to 8 sec. Timeout range is: 80-8000 msec. Enabling stall prevention with the auto timeout will set the timeout to 100 msec. Signed-off-by: NInbar Karmy <inbark@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-
由 Inbar Karmy 提交于
In the event where the device unexpectedly becomes unresponsive for a long period of time, flow control mechanism may propagate pause frames which will cause congestion spreading to the entire network. To prevent this scenario, when the device is stalled for a period longer than a pre-configured timeout, flow control mechanisms are automatically disabled. This patch adds support for the ETHTOOL_PFC_STALL_PREVENTION as a tunable. This API provides support for configuring flow control storm prevention timeout (msec). Signed-off-by: NInbar Karmy <inbark@mellanox.com> Cc: Michal Kubecek <mkubecek@suse.cz> Cc: Andrew Lunn <andrew@lunn.ch> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-
由 Inbar Karmy 提交于
Add the needed capability bit and counters to device spec description. Expose the following two counters in ethtool: tx_pause_storm_warning_events: when the device is stalled for a period longer than a pre-configured watermark, the counter increase, allowing the debug utility an insight into current device status. tx_pause_storm_error_events: when the device is stalled for a period longer than a pre-configured timeout, the pause transmission is disabled, and the counter increase. Signed-off-by: NInbar Karmy <inbark@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-
由 David S. Miller 提交于
Ido Schimmel says: ==================== mlxsw: Offload IPv6 multicast routes Yuval says: The series is intended to allow offloading IPv6 multicast routes and is split into two parts: - First half of the patches continue extending ip6mr [& refactor ipmr] with missing bits necessary for the offloading - fib-notifications, mfc refcounting and default rule identification. - Second half of the patches extend functionality inside mlxsw, beginning with extending lower-parts to support IPv6 mroutes to host and later extending the router/mr internal APIs within the driver to accommodate support in ipv6 configurations. Lastly it adds support in the RTNL_FAMILY_IP6MR notifications, allowing driver to react and offload related routes. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
Add a new trap for PIMv6 packets. As PIM already has a designated trap group [ & rate limiter], simply use the same for PIMv6 as well. Signed-off-by: NYuval Mintz <yuvalm@mellanox.com> Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
Following previous patches driver is ready to handle notifications arriving from ip6mr - start processing those when they arrive following the same manner ipmr currently goes through. This should enable driver to start offloading ipv6 multicast routes. Signed-off-by: NYuval Mintz <yuvalm@mellanox.com> Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
Populate the various operation structures meant for IPv6 with logic unique to that protocol suite. Signed-off-by: NYuval Mintz <yuvalm@mellanox.com> Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
spectrum_router and spectrum_mr have several APIs that are used to manipulate configurations originating from ipmr fib notifications. Following previous patches all the protocol-specifics that are necessary for the configuration are hidden within spectrum_mr. This allows us to clean the API and make sure that other than choosing the mr_table based on the fib notification family, spectrum_router wouldn't care about the source of the notification when passing it onward to spectrum_mr. This would later allow us to leverage the same code for fib notifications originating from ip6mr. Signed-off-by: NYuval Mintz <yuvalm@mellanox.com> Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
Current multicast routing logic in driver assumes it's always meant to deal with IPv4 multicast routes, leaving several placeholders for later IPv6 support [currently usually WARN()]. This patch changes the driver's internal multicast route struct into holding a common mr_mfc instead of the IPv4 mfc_cache. The various placeholders are grouped into 2: - Functions that require only the common bits; These remain and the restriction for IPv4-only is lifted. - Function that require IPv4-specifics - for handling these functions we add sets of operations that encapsulate the protocol differences Signed-off-by: NYuval Mintz <yuvalm@mellanox.com> Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
A step toward offloading IPv6 routing, this adds an additional multicast routing table meant for IPv6 [with its underlying TCAM region] and populates the default rule for IPv6 multicast packets. Following this, ingress IPv6 multicast packets would be trapped and delivered to the host CPU. Signed-off-by: NYuval Mintz <yuvalm@mellanox.com> Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
Since commit c011ec1b ("mlxsw: spectrum: Add the multicast routing offloading logic") spectrum_mr did not populate the protocol portion of the catcahall_route_params; mr-tcam logic worked correctly for ipv4 since the enum value for MLXSW_SP_L3_PROTO_IPV4 is '0'. Explicitly fill the protocol as we'll soon need to differentiate between ipv4 and ipv6. Signed-off-by: NYuval Mintz <yuvalm@mellanox.com> Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
Add new fields for the rmft register necessary for setting the IPv6 multicast FIB table. Add a matching wrapper function for filling the register in the IPv6 scenario. Signed-off-by: NYuval Mintz <yuvalm@mellanox.com> Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
Similarly to what was done in commit 4af5964e ("mlxsw: reg: Configure RIF to forward IPv4 multicast packets by default") we now set two additional bits to allow IPv6 multicast forwarding. Signed-off-by: NYuval Mintz <yuvalm@mellanox.com> Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
Since ipmr and ip6mr are using the same mr_mfc struct at their core, we can now refactor the ipmr_cache_{hold,put} logic and apply refcounting to both ipmr and ip6mr. Signed-off-by: NYuval Mintz <yuvalm@mellanox.com> Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
Add the ability to discern whether a given FIB rule notification relates to the default rule inserted when registering ip6mr or a different one. Would later be used by drivers wishing to offload ipv6 multicast routes but unable to offload rules other than the default one. Signed-off-by: NYuval Mintz <yuvalm@mellanox.com> Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
In similar fashion to ipmr, support fib notifications for ip6mr mfc and vif related events. This would later allow drivers to react to said notifications and offload the IPv6 mroutes. Signed-off-by: NYuval Mintz <yuvalm@mellanox.com> Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
Since all the primitive elements used for the notification done by ipmr are now common [mr_table, mr_mfc, vif_device] we can refactor the logic for dumping them to a common file. Signed-off-by: NYuval Mintz <yuvalm@mellanox.com> Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
Like vif notifications, move the notifier struct for MFC as well as its helpers into a common file; Currently they're only used by ipmr. Signed-off-by: NYuval Mintz <yuvalm@mellanox.com> Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
The fib-notifiers are tightly coupled with the vif_device which is already common. Move the notifier struct definition and helpers to the common file; Currently they're only used by ipmr. Signed-off-by: NYuval Mintz <yuvalm@mellanox.com> Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Kirill Tkhai says: ==================== Converting pernet_operations (part #7.1) this is a resending of the 4 patches from path #7. Anna kindly reviewed them and suggested to take the patches through net tree, since there is pernet_operations::async only in net-next.git. There is Anna's acks on every header, the rest of patch has no changes. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kirill Tkhai 提交于
These pernet_operations create and destroy per-net pipe and dentry, and they seem safe to be marked as async. Signed-off-by: NKirill Tkhai <ktkhai@virtuozzo.com> Acked-by: NAnna Schumaker <Anna.Schumaker@netapp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kirill Tkhai 提交于
These pernet_operations look similar to rpcsec_gss_net_ops, they just create and destroy another cache. Also they create and destroy directory. So, they also look safe to be async. Signed-off-by: NKirill Tkhai <ktkhai@virtuozzo.com> Acked-by: NAnna Schumaker <Anna.Schumaker@netapp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kirill Tkhai 提交于
These pernet_operations look similar to rpcsec_gss_net_ops, they just create and destroy another caches. So, they also can be async. Signed-off-by: NKirill Tkhai <ktkhai@virtuozzo.com> Acked-by: NAnna Schumaker <Anna.Schumaker@netapp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kirill Tkhai 提交于
These pernet_operations initialize and destroy sunrpc_net_id refered per-net items. Only used global list is cache_list, and accesses already serialized. sunrpc_destroy_cache_detail() check for list_empty() without cache_list_lock, but when it's called from unregister_pernet_subsys(), there can't be callers in parallel, so we won't miss list_empty() in this case. Signed-off-by: NKirill Tkhai <ktkhai@virtuozzo.com> Acked-by: NAnna Schumaker <Anna.Schumaker@netapp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Pieter Jansen van Vuuren says: ==================== nfp: flower: add ip fragmentation offloading support This set allows offloading IP fragmentation classification. It Implements ip fragmentation match offloading for both IPv4 and IPv6 and offloads frag, nofrag, first and nofirstfrag classification. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pieter Jansen van Vuuren 提交于
Implement ip fragmentation match offloading for both IPv4 and IPv6. Allows offloading frag, nofrag, first and nofirstfrag classification. Signed-off-by: NPieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: NJakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: NSimon Horman <simon.horman@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pieter Jansen van Vuuren 提交于
Refactored shared ip header code for IPv4 and IPv6 in match offload. Signed-off-by: NPieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: NJakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: NSimon Horman <simon.horman@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Sinan Kaya says: ==================== netdev: Eliminate duplicate barriers on weakly-ordered archs Code includes wmb() followed by writel() in multiple places. writel() already has a barrier on some architectures like arm64. This ends up CPU observing two barriers back to back before executing the register write. Since code already has an explicit barrier call, changing writel() to writel_relaxed(). I did a regex search for wmb() followed by writel() in each drivers directory. I scrubbed the ones I care about in this series. I considered "ease of change", "popular usage" and "performance critical path" as the determining criteria for my filtering. We used relaxed API heavily on ARM for a long time but it did not exist on other architectures. For this reason, relaxed architectures have been paying double penalty in order to use the common drivers. Now that relaxed API is present on all architectures, we can go and scrub all drivers to see what needs to change and what can remain. We start with mostly used ones and hope to increase the coverage over time. It will take a while to cover all drivers. Feel free to apply patches individually. Changes since v6: - bring back amazon ena and add mmiowb, remove ena_com_write_sq_doorbell_rel(). - remove extra mmiowb in bnx2x - correct spelling mistake in bnx2x: Replace doorbell barrier() with wmb() ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sinan Kaya 提交于
Code includes barrier() followed by writel(). writel() already has a barrier on some architectures like arm64. This ends up CPU observing two barriers back to back before executing the register write. Create a new wrapper function with relaxed write operator. Use the new wrapper when a write is following a barrier(). Since code already has an explicit barrier call, changing writel() to writel_relaxed() and adding mmiowb() for ordering protection. Signed-off-by: NSinan Kaya <okaya@codeaurora.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sinan Kaya 提交于
Code includes wmb() followed by writel(). writel() already has a barrier on some architectures like arm64. This ends up CPU observing two barriers back to back before executing the register write. Create a new wrapper function with relaxed write operator. Use the new wrapper when a write is following a wmb(). Since code already has an explicit barrier call, changing writel() to writel_relaxed(). Also add mmiowb() so that write code doesn't move outside of scope. Signed-off-by: NSinan Kaya <okaya@codeaurora.org> Acked-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-