- 20 3月, 2017 11 次提交
-
-
由 Chao Yu 提交于
Both nat_bits cache and free_nid_bitmap cache provide same functionality as a intermediate cache between free nid cache and disk, but with different granularity of indicating free nid range, and different persistence policy. nat_bits cache provides better persistence ability, and free_nid_bitmap provides better granularity. In this patch we combine advantage of both caches, so finally policy of the intermediate cache would be: - init: load free nid status from nat_bits into free_nid_bitmap - lookup: scan free_nid_bitmap before load NAT blocks - update: update free_nid_bitmap in real-time - persistence: udpate and persist nat_bits in checkpoint This patch also resolves performance regression reported by lkp-robot. commit: 4ac91242 ("f2fs: introduce free nid bitmap") d00030cf9cd0bb96fdccc41e33d3c91dcbb672ba ("f2fs: use __set{__clear}_bit_le") 1382c0f3f9d3f936c8bc42ed1591cf7a593ef9f7 ("f2fs: combine nat_bits and free_nid_bitmap cache") 4ac91242 d00030cf9cd0bb96fdccc41e33 1382c0f3f9d3f936c8bc42ed15 ---------------- -------------------------- -------------------------- %stddev %change %stddev %change %stddev \ | \ | \ 77863 ± 0% +2.1% 79485 ± 1% +50.8% 117404 ± 0% aim7.jobs-per-min 231.63 ± 0% -2.0% 227.01 ± 1% -33.6% 153.80 ± 0% aim7.time.elapsed_time 231.63 ± 0% -2.0% 227.01 ± 1% -33.6% 153.80 ± 0% aim7.time.elapsed_time.max 896604 ± 0% -0.8% 889221 ± 3% -20.2% 715260 ± 1% aim7.time.involuntary_context_switches 2394 ± 1% +4.6% 2503 ± 1% +3.7% 2481 ± 2% aim7.time.maximum_resident_set_size 6240 ± 0% -1.5% 6145 ± 1% -14.1% 5360 ± 1% aim7.time.system_time 1111357 ± 3% +1.9% 1132509 ± 2% -6.2% 1041932 ± 2% aim7.time.voluntary_context_switches ... Signed-off-by: NChao Yu <yuchao0@huawei.com> Tested-by: NXiaolong Ye <xiaolong.ye@intel.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
This patch adds to account free nids for each NAT blocks, and while scanning all free nid bitmap, do check count and skip lookuping in full NAT block. Signed-off-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
This patch uses __set{__clear}_bit_le for highter speed. Reviewed-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
This is to avoid build warning reported by kbuild test robot. Signed-off-by: NFengguang Wu <fengguang.wu@intel.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
This patch fixes that SSR can overwrite previous warm node block consisting of a node chain since the last checkpoint. Fixes: 5b6c6be2 ("f2fs: use SSR for warm node as well") Reviewed-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
This BUG_ON() triggered for me once at shutdown, and I don't see a reason for the check. The code correctly checks whether the swap slot cache is usable or not, so an uninitialized swap slot cache is not actually problematic afaik. I've temporarily just switched the BUG_ON() to a WARN_ON_ONCE(), since I'm not sure why that seemingly pointless check was there. I suspect the real fix is to just remove it entirely, but for now we'll warn about it but not bring the machine down. Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux由 Linus Torvalds 提交于
Pull more powerpc fixes from Michael Ellerman: "A couple of minor powerpc fixes for 4.11: - wire up statx() syscall - don't print a warning on memory hotplug when HPT resizing isn't available Thanks to: David Gibson, Chandan Rajendra" * tag 'powerpc-4.11-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/pseries: Don't give a warning when HPT resizing isn't available powerpc: Wire up statx() syscall
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux由 Linus Torvalds 提交于
Pull parisc fixes from Helge Deller: - Mikulas Patocka added support for R_PARISC_SECREL32 relocations in modules with CONFIG_MODVERSIONS. - Dave Anglin optimized the cache flushing for vmap ranges. - Arvind Yadav provided a fix for a potential NULL pointer dereference in the parisc perf code (and some code cleanups). - I wired up the new statx system call, fixed some compiler warnings with the access_ok() macro and fixed shutdown code to really halt a system at shutdown instead of crashing & rebooting. * 'parisc-4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Fix system shutdown halt parisc: perf: Fix potential NULL pointer dereference parisc: Avoid compiler warnings with access_ok() parisc: Wire up statx system call parisc: Optimize flush_kernel_vmap_range and invalidate_kernel_vmap_range parisc: support R_PARISC_SECREL32 relocation in modules
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending由 Linus Torvalds 提交于
Pull SCSI target fixes from Nicholas Bellinger: "The bulk of the changes are in qla2xxx target driver code to address various issues found during Cavium/QLogic's internal testing (stable CC's included), along with a few other stability and smaller miscellaneous improvements. There are also a couple of different patch sets from Mike Christie, which have been a result of his work to use target-core ALUA logic together with tcm-user backend driver. Finally, a patch to address some long standing issues with pass-through SCSI export of TYPE_TAPE + TYPE_MEDIUM_CHANGER devices, which will make folks using physical (or virtual) magnetic tape happy" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (28 commits) qla2xxx: Update driver version to 9.00.00.00-k qla2xxx: Fix delayed response to command for loop mode/direct connect. qla2xxx: Change scsi host lookup method. qla2xxx: Add DebugFS node to display Port Database qla2xxx: Use IOCB interface to submit non-critical MBX. qla2xxx: Add async new target notification qla2xxx: Export DIF stats via debugfs qla2xxx: Improve T10-DIF/PI handling in driver. qla2xxx: Allow relogin to proceed if remote login did not finish qla2xxx: Fix sess_lock & hardware_lock lock order problem. qla2xxx: Fix inadequate lock protection for ABTS. qla2xxx: Fix request queue corruption. qla2xxx: Fix memory leak for abts processing qla2xxx: Allow vref count to timeout on vport delete. tcmu: Convert cmd_time_out into backend device attribute tcmu: make cmd timeout configurable tcmu: add helper to check if dev was configured target: fix race during implicit transition work flushes target: allow userspace to set state to transitioning target: fix ALUA transition timeout handling ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm由 Linus Torvalds 提交于
Pull device-dax fixes from Dan Williams: "The device-dax driver was not being careful to handle falling back to smaller fault-granularity sizes. The driver already fails fault attempts that are smaller than the device's alignment, but it also needs to handle the cases where a larger page mapping could be established. For simplicity of the immediate fix the implementation just signals VM_FAULT_FALLBACK until fault-size == device-alignment. One fix is for -stable to address pmd-to-pte fallback from the original implementation, another fix is for the new (introduced in 4.11-rc1) pud-to-pmd regression, and a typo fix comes along for the ride. These have received a build success notification from the kbuild robot" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: device-dax: fix debug output typo device-dax: fix pud fault fallback handling device-dax: fix pmd/pte fault fallback handling
-
- 19 3月, 2017 29 次提交
-
-
由 Himanshu Madhani 提交于
Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> signed-off-by: NGiridhar Malavali <giridhar.malavali@cavium.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Quinn Tran 提交于
Current driver wait for FW to be in the ready state before processing in-coming commands. For Arbitrated Loop or Point-to- Point (not switch), FW Ready state can take a while. FW will transition to ready state after all Nports have been logged in. In the mean time, certain initiators have completed the login and starts IO. Driver needs to start processing all queues if FW is already started. Signed-off-by: NQuinn Tran <quinn.tran@cavium.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Quinn Tran 提交于
For target mode, when new scsi command arrive, driver first performs a look up of the SCSI Host. The current look up method is based on the ALPA portion of the NPort ID. For Cisco switch, the ALPA can not be used as the index. Instead, the new search method is based on the full value of the Nport_ID via btree lib. Signed-off-by: NQuinn Tran <quinn.tran@cavium.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Himanshu Madhani 提交于
Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NGiridhar Malavali <giridhar.malavali@cavium.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Quinn Tran 提交于
The Mailbox interface is currently over subscribed. We like to reserve the Mailbox interface for the chip managment and link initialization. Any non essential Mailbox command will be routed through the IOCB interface. The IOCB interface is able to absorb more commands. Following commands are being routed through IOCB interface - Get ID List (007Ch) - Get Port DB (0064h) - Get Link Priv Stats (006Dh) Signed-off-by: NQuinn Tran <quinn.tran@cavium.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Quinn Tran 提交于
Signed-off-by: NQuinn Tran <quinn.tran@cavium.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Anil Gurumurthy 提交于
Signed-off-by: NAnil Gurumurthy <anil.gurumurthy@cavium.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Quinn Tran 提交于
Add routines to support T10 DIF tag. Signed-off-by: NQuinn Tran <quinn.tran@cavium.com> Signed-off-by: NAnil Gurumurthy <anil.gurumurthy@cavium.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Quinn Tran 提交于
If the remote port have started the login process, then the PLOGI and PRLI should be back to back. Driver will allow the remote port to complete the process. For the case where the remote port decide to back off from sending PRLI, this local port sets an expiration timer for the PRLI. Once the expiration time passes, the relogin retry logic is allowed to go through and perform login with the remote port. Signed-off-by: NQuinn Tran <quinn.tran@qlogic.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Quinn Tran 提交于
The main lock that needs to be held for CMD or TMR submission to upper layer is the sess_lock. The sess_lock is used to serialize cmd submission and session deletion. The addition of hardware_lock being held is not necessary. This patch removes hardware_lock dependency from CMD/TMR submission. Use hardware_lock only for error response in this case. Path1 CPU0 CPU1 ---- ---- lock(&(&ha->tgt.sess_lock)->rlock); lock(&(&ha->hardware_lock)->rlock); lock(&(&ha->tgt.sess_lock)->rlock); lock(&(&ha->hardware_lock)->rlock); Path2/deadlock *** DEADLOCK *** Call Trace: dump_stack+0x85/0xc2 print_circular_bug+0x1e3/0x250 __lock_acquire+0x1425/0x1620 lock_acquire+0xbf/0x210 _raw_spin_lock_irqsave+0x53/0x70 qlt_sess_work_fn+0x21d/0x480 [qla2xxx] process_one_work+0x1f4/0x6e0 Cc: <stable@vger.kernel.org> Cc: Bart Van Assche <Bart.VanAssche@sandisk.com> Reported-by: NBart Van Assche <Bart.VanAssche@sandisk.com> Signed-off-by: NQuinn Tran <quinn.tran@cavium.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Quinn Tran 提交于
Normally, ABTS is sent to Target Core as Task MGMT command. In the case of error, qla2xxx needs to send response, hardware_lock is required to prevent request queue corruption. Cc: <stable@vger.kernel.org> Signed-off-by: NQuinn Tran <quinn.tran@cavium.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Quinn Tran 提交于
When FW notify driver or driver detects low FW resource, driver tries to send out Busy SCSI Status to tell Initiator side to back off. During the send process, the lock was not held. Cc: <stable@vger.kernel.org> Signed-off-by: NQuinn Tran <quinn.tran@qlogic.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Quinn Tran 提交于
Cc: <stable@vger.kernel.org> Signed-off-by: NQuinn Tran <quinn.tran@cavium.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Joe Carnuccio 提交于
Cc: <stable@vger.kernel.org> Signed-off-by: NJoe Carnuccio <joe.carnuccio@cavium.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Nicholas Bellinger 提交于
Instead of putting cmd_time_out under ../target/core/user_0/foo/control, which has historically been used by parameters needed for initial backend device configuration, go ahead and move cmd_time_out into a backend device attribute. In order to do this, tcmu_module_init() has been updated to create a local struct configfs_attribute **tcmu_attrs, that is based upon the existing passthrough_attrib_attrs along with the new cmd_time_out attribute. Once **tcm_attrs has been setup, go ahead and point it at tcmu_ops->tb_dev_attrib_attrs so it's picked up by target-core. Also following MNC's previous change, ->cmd_time_out is stored in milliseconds but exposed via configfs in seconds. Also, note this patch restricts the modification of ->cmd_time_out to before + after the TCMU device has been configured, but not while it has active fabric exports. Cc: Mike Christie <mchristi@redhat.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Mike Christie 提交于
A single daemon could implement multiple types of devices using multuple types of real devices that may not support restarting from crashes and/or handling tcmu timeouts. This makes the cmd timeout configurable, so handlers that do not support it can turn if off for now. Signed-off-by: NMike Christie <mchristi@redhat.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Mike Christie 提交于
This adds a helper to check if the dev was configured. It will be used in the next patch to prevent updates to some config settings after the device has been setup. Signed-off-by: NMike Christie <mchristi@redhat.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
git://github.com/openrisc/linux由 Linus Torvalds 提交于
Pull OpenRISC fixes from Stafford Horne: "OpenRISC fixes for build issues that were exposed by kbuild robots after 4.11 merge. All from allmodconfig builds. This includes: - bug in the handling of 8-byte get_user() calls - module build failure due to multile missing symbol exports" * tag 'openrisc-for-linus' of git://github.com/openrisc/linux: openrisc: Export symbols needed by modules openrisc: fix issue handling 8 byte get_user calls openrisc: xchg: fix `computed is not used` warning
-
由 Mike Christie 提交于
This fixes the following races: 1. core_alua_do_transition_tg_pt could have read tg_pt_gp_alua_access_state and gone into this if chunk: if (!explicit && atomic_read(&tg_pt_gp->tg_pt_gp_alua_access_state) == ALUA_ACCESS_STATE_TRANSITION) { and then core_alua_do_transition_tg_pt_work could update the state. core_alua_do_transition_tg_pt would then only set tg_pt_gp_alua_pending_state and the tg_pt_gp_alua_access_state would not get updated with the second calls state. 2. core_alua_do_transition_tg_pt could be setting tg_pt_gp_transition_complete while the tg_pt_gp_transition_work is already completing. core_alua_do_transition_tg_pt then waits on the completion that will never be called. To handle these issues, we just call flush_work which will return when core_alua_do_transition_tg_pt_work has completed so there is no need to do the complete/wait. And, if core_alua_do_transition_tg_pt_work was running, instead of trying to sneak in the state change, we just schedule up another core_alua_do_transition_tg_pt_work call. Note that this does not handle a possible race where there are multiple threads call core_alua_do_transition_tg_pt at the same time. I think we need a mutex in target_tg_pt_gp_alua_access_state_store. Signed-off-by: NMike Christie <mchristi@redhat.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Mike Christie 提交于
Userspace target_core_user handlers like tcmu-runner may want to set the ALUA state to transitioning while it does implicit transitions. This patch allows that state when set from configfs. Signed-off-by: NMike Christie <mchristi@redhat.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Mike Christie 提交于
The implicit transition time tells initiators the min time to wait before timing out a transition. We currently schedule the transition to occur in tg_pt_gp_implicit_trans_secs seconds so there is no room for delays. If core_alua_do_transition_tg_pt_work->core_alua_update_tpg_primary_metadata needs to write out info to a remote file, then the initiator can easily time out the operation. Signed-off-by: NMike Christie <mchristi@redhat.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Mike Christie 提交于
If tcmu-runner is processing a STPG and needs to change the kernel's ALUA state then we cannot use the same work queue for task management requests and ALUA transitions, because we could deadlock. The problem occurs when a STPG times out before tcmu-runner is able to call into target_tg_pt_gp_alua_access_state_store-> core_alua_do_port_transition -> core_alua_do_transition_tg_pt -> queue_work. In this case, the tmr is on the work queue waiting for the STPG to complete, but the STPG transition is now queued behind the waiting tmr. Note: This bug will also be fixed by this patch: http://www.spinics.net/lists/target-devel/msg14560.html which switches the tmr code to use the system workqueues. For both, I am not sure if we need a dedicated workqueue since it is not a performance path and I do not think we need WQ_MEM_RECLAIM to make forward progress to free up memory like the block layer does. Signed-off-by: NMike Christie <mchristi@redhat.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Mike Christie 提交于
We do not setup the LU group for pscsi devices, so if you write a state to alua_access_state that will cause a transition you will get a NULL pointer dereference. This patch will fail attempts to try and transition the path for backend devices that set the TRANSPORT_FLAG_PASSTHROUGH_ALUA flag. Signed-off-by: NMike Christie <mchristi@redhat.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Mike Christie 提交于
This patch allows passthrough backends to use the core/base LIO ALUA setup and state checks, but still handle the execution of commands. This will allow the target_core_user module to execute STPG and RTPG in userspace, and not have to duplicate the ALUA state checks, path information (needed so we can check if command is executable on specific paths) and setup (rtslib sets/updates the configfs ALUA interface like it does for iblock or file). For STPG, the target_core_user userspace daemon, tcmu-runner will still execute the STPG, and to update the core/base LIO state it will use the existing configfs interface. For RTPG, tcmu-runner will loop over configfs and/or cache the state. Signed-off-by: NMike Christie <mchristi@redhat.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Mike Christie 提交于
We only were returing failure if the last opt to be parsed failed. This has a return failure when we first detect a failure. Signed-off-by: NMike Christie <mchristi@redhat.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Mike Christie 提交于
tcmu hard codes the hw_max_sectors to 128 which is a litle small. Userspace uses the max_sectors to report the optimal IO size and some initiators perform better with larger IOs (open-iscsi seems to do better with 256 to 512 depending on the test). (Fix do not display hw max sectors twice - MNC) Signed-off-by: NMike Christie <mchristi@redhat.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Nicholas Bellinger 提交于
All in-tree fabric drivers provide a tfo->check_stop_free(), so there is no need to do the extra check within existing transport_cmd_check_stop_to_fabric() code. Just to be sure, add a check in target_fabric_tf_ops_check() to notify any out-of-tree drivers that might be missing it. Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Helge Deller 提交于
On those parisc machines which don't provide a software power off function, the system currently kills the init process at the end of a shutdown and unexpectedly restarts insteads of halting. Fix it by adding a loop which will not return. Signed-off-by: NHelge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # 4.9+
-
由 Arvind Yadav 提交于
Fix potential NULL pointer dereference and clean up coding style errors (code indent, trailing whitespaces). Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: NHelge Deller <deller@gmx.de>
-