- 16 8月, 2018 4 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux由 Linus Torvalds 提交于
Pull SELinux updates from Paul Moore: "There are 16 patches in here but really only one that is of any significance. That one patch is by nixiaoming and fixes a few places where we were not properly cleaning up dentry and inode objects in the selinuxfs error handling code. The rest are either printk->pr_* conversions, constification tweaks, and a minor tweak to MAINTAINERS. Everything passes the selinux-testsuite and looks to merge cleanly against your master branch" * tag 'selinux-pr-20180814' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: cleanup dentry and inodes on error in selinuxfs selinux: constify write_op[] selinux: Cleanup printk logging in netnode selinux: Cleanup printk logging in avc selinux: Cleanup printk logging in netif selinux: Cleanup printk logging in netport selinux: Cleanup printk logging in sidtab selinux: Cleanup printk logging in netlink selinux: Cleanup printk logging in selinuxfs selinux: Cleanup printk logging in services selinux: Cleanup printk logging in avtab selinux: Cleanup printk logging in hooks selinux: Cleanup printk logging in policydb selinux: Cleanup printk logging in ebitmap selinux: Cleanup printk logging in conditional MAINTAINERS: update the LSM and SELinux subsystems
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security由 Linus Torvalds 提交于
Pull security subsystem updates from James Morris: - kstrdup() return value fix from Eric Biggers - Add new security_load_data hook to differentiate security checking of kernel-loaded binaries in the case of there being no associated file descriptor, from Mimi Zohar. - Add ability to IMA to specify a policy at build-time, rather than just via command line params or by loading a custom policy, from Mimi. - Allow IMA and LSMs to prevent sysfs firmware load fallback (e.g. if using signed firmware), from Mimi. - Allow IMA to deny loading of kexec kernel images, as they cannot be measured by IMA, from Mimi. * 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: security: check for kstrdup() failure in lsm_append() security: export security_kernel_load_data function ima: based on policy warn about loading firmware (pre-allocated buffer) module: replace the existing LSM hook in init_module ima: add build time policy ima: based on policy require signed firmware (sysfs fallback) firmware: add call to LSM hook before firmware sysfs fallback ima: based on policy require signed kexec kernel images kexec: add call to LSM hook in original kexec_load syscall security: define new LSM hook named security_kernel_load_data MAINTAINERS: remove the outdated "LINUX SECURITY MODULE (LSM) FRAMEWORK" entry
-
由 Guenter Roeck 提交于
allmodconfig+CONFIG_INTEL_KVM=n results in the following build error. ERROR: "l1tf_vmx_mitigation" [arch/x86/kvm/kvm.ko] undefined! Fixes: 5b76a3cf ("KVM: VMX: Tell the nested hypervisor to skip L1D flush on vmentry") Reported-by: NMeelis Roos <mroos@linux.ee> Cc: Meelis Roos <mroos@linux.ee> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux由 Linus Torvalds 提交于
Pull pstore update from Kees Cook: "This cycle has been very quiet for pstore: the only change is adding awareness of the zstd compression method" * tag 'pstore-v4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: pstore: add zstd compression support
-
- 15 8月, 2018 23 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux由 Linus Torvalds 提交于
Pull hardened usercopy updates from Kees Cook: "This cleans up a minor Kconfig issue and adds a kernel boot option for disabling hardened usercopy for distro users that may have corner-case performance issues (e.g. high bandwidth small-packet UDP traffic). Summary: - drop unneeded Kconfig "select BUG" (Kamal Mostafa) - add "hardened_usercopy=off" rare performance needs (Chris von Recklinghausen)" * tag 'hardened-usercopy-v4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: usercopy: Allow boot cmdline disabling of hardening usercopy: Do not select BUG with HARDENED_USERCOPY
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip由 Linus Torvalds 提交于
Pull xen updates from Juergen Gross: - add dma-buf functionality to Xen grant table handling - fix for booting the kernel as Xen PVH dom0 - fix for booting the kernel as a Xen PV guest with CONFIG_DEBUG_VIRTUAL enabled - other minor performance and style fixes * tag 'for-linus-4.19-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/balloon: fix balloon initialization for PVH Dom0 xen: don't use privcmd_call() from xen_mc_flush() xen/pv: Call get_cpu_address_sizes to set x86_virt/phys_bits xen/biomerge: Use true and false for boolean values xen/gntdev: don't dereference a null gntdev_dmabuf on allocation failure xen/spinlock: Don't use pvqspinlock if only 1 vCPU xen/gntdev: Implement dma-buf import functionality xen/gntdev: Implement dma-buf export functionality xen/gntdev: Add initial support for dma-buf UAPI xen/gntdev: Make private routines/structures accessible xen/gntdev: Allow mappings for DMA buffers xen/grant-table: Allow allocating buffers suitable for DMA xen/balloon: Share common memory reservation routines xen/grant-table: Make set/clear page private code shared
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux由 Linus Torvalds 提交于
Pull arm64 updates from Will Deacon: "A bunch of good stuff in here. Worth noting is that we've pulled in the x86/mm branch from -tip so that we can make use of the core ioremap changes which allow us to put down huge mappings in the vmalloc area without screwing up the TLB. Much of the positive diffstat is because of the rseq selftest for arm64. Summary: - Wire up support for qspinlock, replacing our trusty ticket lock code - Add an IPI to flush_icache_range() to ensure that stale instructions fetched into the pipeline are discarded along with the I-cache lines - Support for the GCC "stackleak" plugin - Support for restartable sequences, plus an arm64 port for the selftest - Kexec/kdump support on systems booting with ACPI - Rewrite of our syscall entry code in C, which allows us to zero the GPRs on entry from userspace - Support for chained PMU counters, allowing 64-bit event counters to be constructed on current CPUs - Ensure scheduler topology information is kept up-to-date with CPU hotplug events - Re-enable support for huge vmalloc/IO mappings now that the core code has the correct hooks to use break-before-make sequences - Miscellaneous, non-critical fixes and cleanups" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (90 commits) arm64: alternative: Use true and false for boolean values arm64: kexec: Add comment to explain use of __flush_icache_range() arm64: sdei: Mark sdei stack helper functions as static arm64, kaslr: export offset in VMCOREINFO ELF notes arm64: perf: Add cap_user_time aarch64 efi/libstub: Only disable stackleak plugin for arm64 arm64: drop unused kernel_neon_begin_partial() macro arm64: kexec: machine_kexec should call __flush_icache_range arm64: svc: Ensure hardirq tracing is updated before return arm64: mm: Export __sync_icache_dcache() for xen-privcmd drivers/perf: arm-ccn: Use devm_ioremap_resource() to map memory arm64: Add support for STACKLEAK gcc plugin arm64: Add stack information to on_accessible_stack drivers/perf: hisi: update the sccl_id/ccl_id when MT is supported arm64: fix ACPI dependencies rseq/selftests: Add support for arm64 arm64: acpi: fix alignment fault in accessing ACPI efi/arm: map UEFI memory map even w/o runtime services enabled efi/arm: preserve early mapping of UEFI memory map longer for BGRT drivers: acpi: add dependency of EFI for arm64 ...
-
由 Vlastimil Babka 提交于
The function has an inline "return false;" definition with CONFIG_SMP=n but the "real" definition is also visible leading to "redefinition of ‘apic_id_is_primary_thread’" compiler error. Guard it with #ifdef CONFIG_SMP Signed-off-by: NVlastimil Babka <vbabka@suse.cz> Fixes: 6a4d2657 ("x86/smp: Provide topology_is_primary_thread()") Cc: stable@vger.kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Abel Vesa 提交于
Commit 0cc3cd21 ("cpu/hotplug: Boot HT siblings at least once") breaks non-SMP builds. [ I suspect the 'bool' fields should just be made to be bitfields and be exposed regardless of configuration, but that's a separate cleanup that I'll leave to the owners of this file for later. - Linus ] Fixes: 0cc3cd21 ("cpu/hotplug: Boot HT siblings at least once") Cc: Dave Hansen <dave.hansen@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: NAbel Vesa <abelvesa@linux.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.lwn.net/linux由 Linus Torvalds 提交于
Pull documentation update from Jonathan Corbet: "This was a moderately busy cycle for docs, with the usual collection of small fixes and updates. We also have new ktime_get_*() docs from Arnd, some kernel-doc fixes, a new set of Italian translations (non so se vale la pena, ma non fa male - speriamo bene), and some extensive early memory-management documentation improvements from Mike Rapoport" * tag 'docs-4.19' of git://git.lwn.net/linux: (52 commits) Documentation: corrections to console/console.txt Documentation: add ioctl number entry for v4l2-subdev.h Remove gendered language from management style documentation scripts/kernel-doc: Escape all literal braces in regexes docs/mm: add description of boot time memory management docs/mm: memblock: add overview documentation docs/mm: memblock: add kernel-doc description for memblock types docs/mm: memblock: add kernel-doc comments for memblock_add[_node] docs/mm: memblock: update kernel-doc comments mm/memblock: add a name for memblock flags enumeration docs/mm: bootmem: add overview documentation docs/mm: bootmem: add kernel-doc description of 'struct bootmem_data' docs/mm: bootmem: fix kernel-doc warnings docs/mm: nobootmem: fixup kernel-doc comments mm/bootmem: drop duplicated kernel-doc comments Documentation: vm.txt: Adding 'nr_hugepages_mempolicy' parameter description. doc:it_IT: translation for kernel-hacking docs: Fix the reference labels in Locking.rst doc: tracing: Fix a typo of trace_stat mm: Introduce new type vm_fault_t ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull sound updates from Takashi Iwai: "It's been busy summer weeks and hence lots of changes, partly for a few new drivers and partly for a wide range of fixes. Here are highlights: ALSA Core: - Fix rawmidi buffer management, code cleanup / refactoring - Fix the SG-buffer page handling with incorrect fallback size - Fix the stall at virmidi trigger callback with a large buffer; also offloading and code-refactoring along with it - Various ALSA sequencer code cleanups ASoC: - Deploy the standard snd_pcm_stop_xrun() helper in several drivers - Support for providing name prefixes to generic component nodes - Quite a few fixes for DPCM as it gains a bit wider use and more robust testing - Generalization of the DIO2125 support to a simple amplifier driver - Accessory detection support for the audio graph card - DT support for PXA AC'97 devices - Quirks for a number of new x86 systems - Support for AM Logic Meson, Everest ES7154, Intel systems with RT5682, Qualcomm QDSP6 and WCD9335, Realtek RT5682 and TI TAS5707 HD-audio: - Code refactoring in HD-audio ext codec codes to drop own classes; preliminary works for the upcoming legacy codec support - Generalized DRM audio component for the upcoming radeon / amdgpu support - Unification of mic mute-LED and GPIO support for various codecs - Further improvement of CA0132 codec support including Recon3D - Proper vga_switcheroo handling for AMD i-GPU - Update of model list in documentation - Fixups for another HP Spectre x360, Conexant codecs, power-save blacklist update USB-audio: - Fix the invalid sample rate setup with external clock - Support of UAC3 selector units and processing units - Basic UAC3 power-domain support - Support for Encore mDSD and Thesycon-based DSD devices - Preparation for future complete callback changes Firewire: - Add support for MOTU Traveler Misc: - The endianess notation fixes in various drivers - Add fall-through comment in lots of drivers - Various sparse warning fixes, e.g. about PCM format types" * tag 'sound-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (529 commits) ASoC: adav80x: mark expected switch fall-through ASoC: da7219: Add delays to capture path to remove DC offset noise ALSA: usb-audio: Mark expected switch fall-through ALSA: mixart: Mark expected switch fall-through ALSA: opl3: Mark expected switch fall-through ALSA: hda/ca0132 - Add exit commands for Recon3D ALSA: hda/ca0132 - Change mixer controls for Recon3D ALSA: hda/ca0132 - Add Recon3D input and output select commands ALSA: hda/ca0132 - Add DSP setup defaults for Recon3D ALSA: hda/ca0132 - Add Recon3D startup functions and setup ALSA: hda/ca0132 - Add bool variable to enable/disable pci region2 mmio ALSA: hda/ca0132 - Add Recon3D pincfg ALSA: hda/ca0132 - Add quirk ID and enum for Recon3D ALSA: hda/ca0132 - Add alt_functions unsolicited response ALSA: hda/ca0132 - Clean up ca0132_init function. ALSA: hda/ca0132 - Create mmio gpio function to make code clearer ASoC: wm_adsp: Make DSP name configurable by codec driver ASoC: wm_adsp: Declare firmware controls from codec driver ASoC: max98373: Added software reset register to readable registers ASoC: wm_adsp: Correct DSP pointer for preloader control ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull ACPI updates from Rafael Wysocki: "These revert two ACPICA commits that are not needed any more, rework the property graphs support in ACPI to be more aligned with the analogous DT code, add some new quirks and remove one that isn't needed any more, add a special platform driver to enumerate multiple I2C devices hooked up to the same device object in the ACPI tables and update the battery and button drivers. Specifics: - Revert two ACPICA commits that are not needed any more (Erik Schmauss). - Rework property graph support in the ACPI device properties framework to make it behave more like the analogous DT code and update the documentation of it (Sakari Ailus). - Change the default ACPI device status after initialization to ACPI_STA_DEFAULT instead of 0 (Hans de Goede). - Add a special platform driver for enumerating multiple I2C devices hooked up to the same object in the ACPI tables (Hans de Goede). - Fix the ACPI battery driver to avoid reporting full capacity on systems without support for that and clean it up (Hans de Goede, Dmitry Rozhkov, Lucas Rangit Magasweran). - Add two system wakeup quirks to the ACPI EC driver (Aaron Ma, Mika Westerberg). - Add the touchscreen on Dell Venue Pro 7139 to the list of "always present" devices to make it work (Tristian Celestin). - Revert a special tables handling quirk for Dell XPS 9570 and Precision M5530 which is not needed any more (Kai Heng Feng). - Add support for a new OEM _OSI string to allow system vendors to work around issues with NVidia HDMI audio (Alex Hung). - Prevent the ACPI button driver from reporting excessive system wakeup events and clean it up (Ravi Chandra Sadineni, Randy Dunlap). - Clean up two minor code style issues in the ACPI core and GHES handling on ARM64 (Dongjiu Geng, John Garry, Tom Todd)" * tag 'acpi-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (34 commits) platform/x86: Add ACPI i2c-multi-instantiate pseudo driver ACPI / x86: utils: Remove status workaround from acpi_device_always_present() ACPI / scan: Create platform device for fwnodes with multiple i2c devices ACPI / scan: Initialize status to ACPI_STA_DEFAULT ACPI / EC: Add another entry for Thinkpad X1 Carbon 6th ACPI: bus: Fix a pointer coding style issue arm64 / ACPI: clean the additional checks before calling ghes_notify_sea() ACPI / scan: Add static attribute to indirect_io_hosts[] ACPI / battery: Do not export energy_full[_design] on devices without full_charge_capacity ACPI / EC: Use ec_no_wakeup on ThinkPad X1 Yoga 3rd ACPI / battery: get rid of negations in conditions ACPI / battery: use specialized print macros ACPI / battery: reorder headers alphabetically ACPI / battery: drop inclusion of init.h ACPI: battery: remove redundant old_present check on insertion ACPI: property: graph: Update graph documentation to use generic references ACPI: property: graph: Improve graph documentation for port/ep numbering ACPI: property: graph: Fix graph documentation ACPI: property: Update documentation for hierarchical data extension 1.1 ACPI: property: Document key numbering for hierarchical data extension refs ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull power management updates from Rafael Wysocki: "These add a new framework for CPU idle time injection, to be used by all of the idle injection code in the kernel in the future, fix some issues and add a number of relatively small extensions in multiple places. Specifics: - Add a new framework for CPU idle time injection (Daniel Lezcano). - Add AVS support to the armada-37xx cpufreq driver (Gregory CLEMENT). - Add support for current CPU frequency reporting to the ACPI CPPC cpufreq driver (George Cherian). - Rework the cooling device registration in the imx6q/thermal driver (Bastian Stender). - Make the pcc-cpufreq driver refuse to work with dynamic scaling governors on systems with many CPUs to avoid scalability issues with it (Rafael Wysocki). - Fix the intel_pstate driver to report different maximum CPU frequencies on systems where they really are different and to ignore the turbo active ratio if hardware-managend P-states (HWP) are in use; make it use the match_string() helper (Xie Yisheng, Srinivas Pandruvada). - Fix a minor deferred probe issue in the qcom-kryo cpufreq driver (Niklas Cassel). - Add a tracepoint for the tracking of frequency limits changes (from Andriod) to the cpufreq core (Ruchi Kandoi). - Fix a circular lock dependency between CPU hotplug and sysfs locking in the cpufreq core reported by lockdep (Waiman Long). - Avoid excessive error reports on driver registration failures in the ARM cpuidle driver (Sudeep Holla). - Add a new device links flag to the driver core to make links go away automatically on supplier driver removal (Vivek Gautam). - Eliminate potential race condition between system-wide power management transitions and system shutdown (Pingfan Liu). - Add a quirk to save NVS memory on system suspend for the ASUS 1025C laptop (Willy Tarreau). - Make more systems use suspend-to-idle (instead of ACPI S3) by default (Tristian Celestin). - Get rid of stack VLA usage in the low-level hibernation code on 64-bit x86 (Kees Cook). - Fix error handling in the hibernation core and mark an expected fall-through switch in it (Chengguang Xu, Gustavo Silva). - Extend the generic power domains (genpd) framework to support attaching a device to a power domain by name (Ulf Hansson). - Fix device reference counting and user limits initialization in the devfreq core (Arvind Yadav, Matthias Kaehlcke). - Fix a few issues in the rk3399_dmc devfreq driver and improve its documentation (Enric Balletbo i Serra, Lin Huang, Nick Milner). - Drop a redundant error message from the exynos-ppmu devfreq driver (Markus Elfring)" * tag 'pm-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (35 commits) PM / reboot: Eliminate race between reboot and suspend PM / hibernate: Mark expected switch fall-through cpufreq: intel_pstate: Ignore turbo active ratio in HWP cpufreq: Fix a circular lock dependency problem cpu/hotplug: Add a cpus_read_trylock() function x86/power/hibernate_64: Remove VLA usage cpufreq: trace frequency limits change cpufreq: intel_pstate: Show different max frequency with turbo 3 and HWP cpufreq: pcc-cpufreq: Disable dynamic scaling on many-CPU systems cpufreq: qcom-kryo: Silently error out on EPROBE_DEFER cpufreq / CPPC: Add cpuinfo_cur_freq support for CPPC cpufreq: armada-37xx: Add AVS support dt-bindings: marvell: Add documentation for the Armada 3700 AVS binding PM / devfreq: rk3399_dmc: Fix duplicated opp table on reload. PM / devfreq: Init user limits from OPP limits, not viceversa PM / devfreq: rk3399_dmc: fix spelling mistakes. PM / devfreq: rk3399_dmc: do not print error when get supply and clk defer. dt-bindings: devfreq: rk3399_dmc: move interrupts to be optional. PM / devfreq: rk3399_dmc: remove wait for dcf irq event. dt-bindings: clock: add rk3399 DDR3 standard speed bins. ...
-
由 Linus Torvalds 提交于
Merge tag 'leds-for-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED updates from Jacek Anaszewski: "LED triggers improvements make the biggest part of this pull request. The most striking ones, that allowed for nice cleanups in the triggers are: - centralized handling of creation and removal of trigger sysfs attributes via attribute group - addition of module_led_trigger() helper The other things that need to be mentioned: New features and improvements to existing LED class drivers: - lt3593: add DT support, switch to gpiod interface - lm3692x: support LED sync configuration, change OF calls to fwnode calls - apu: modify PC Engines apu/apu2 driver to support apu3 Change in the drivers/net/can/led.c: - mark led trigger as broken since it's in the way for the further cleanups. It implements a subset of the netdev trigger and an Ack is needed from someone who can actually test and confirm that the netdev trigger works for can devices" * tag 'leds-for-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: (32 commits) leds: ns2: Change unsigned to unsigned int usb: simplify usbport trigger leds: gpio trigger: simplifications from core changes leds: backlight trigger: simplifications from core changes leds: activity trigger: simplifications from core changes leds: default-on trigger: make use of module_led_trigger() leds: heartbeat trigger: simplifications from core changes leds: oneshot trigger: simplifications from core changes leds: transient trigger: simplifications from core changes leds: timer trigger: simplifications from core changes leds: netdev trigger: simplifications from core changes leds: triggers: new function led_set_trigger_data() leds: triggers: define module_led_trigger helper leds: triggers: handle .trigger_data and .activated() in the core leds: triggers: add device attribute support leds: triggers: let struct led_trigger::activate() return an error code leds: triggers: make the MODULE_LICENSE string match the actual license leds: lm3692x: Support LED sync configuration dt: bindings: lm3692x: Update binding for LED sync control leds: lm3692x: Change DT calls to fwnode calls ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux由 Linus Torvalds 提交于
Pull Devicetree updates from Rob Herring: - Remove an obsolete hack for PPC32 longtrail systems - Make of_io_request_and_map() "name" arg optional - Add vendor prefixes for bitmain, Asus, and Y Soft - Remove 'interrupt-parent' from bindings as it is implicit - New properties for wm8994 audio codec - Add 'clocks' property support to SRAM binding - Add binding for ASPEED coprocessor interrupt controller - Various binding spelling and link fixes * tag 'devicetree-for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: Documentation: remove dynamic-resolution-notes reference to non-existent file dt-bindings: Add Y Soft Corporation vendor prefix of/fdt: Remove PPC32 longtrail hack in memory scan dt-bindings: remove 'interrupt-parent' from bindings pinctrl: tegra: fix spelling in devicetree binding document usb: dwc3: rockchip: Fix PHY documentation links. dt-bindings: sound: wm8994: document wlf,csnaddr-pd property dt-bindings: sound: wm8994: document wlf,spkmode-pu property dt-bindings: sram: Add 'clocks' as an optional property dt-bindings: Add vendor prefix for AsusTek Computer Inc. dt-bindings: misc: ASPEED coprocessor interrupt controller dt-bindings: gpio: pca953x: Document interrupts, update example drivers/of: Make of_io_request_and_map() "name" argument optional dt-bindings: Add bitmain vendor prefix Documentation: devicetree: tilcdc: fix spelling mistake "suppors" -> "supports"
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl由 Linus Torvalds 提交于
Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for v4.19: Core changes: - Augment pinctrl_generic_add_group() and pinmux_generic_add_function() to return the selector for the added group/function to the caller and augment (hopefully) all drivers to handle this New subdrivers: - Qualcomm PM8998 and PM8005 are supported in the SPMI pin control and GPIO driver - Intel Ice Lake PCH (platform controller hub) support - NXP (ex Freescale) i.MX8MQ support - Berlin AS370 support Improvements to drivers: - Support interrupts on the Ocelot pin controller - Add SPI pins to the Uniphier driver - Define a GPIO compatible per SoC in the Tegra driver - Push Tegra initialization down in the initlevels - Support external wakeup interrupts on the Exynos - Add generic clocks pins to the meson driver - Add USB and HSCIF pins for some Renesas PFC chips - Suspend/resume support in the armada-37xx - Interrupt support for the Actions Semiconductor S900 also known as "owl" - Correct the pin ordering in Cedarfork - Debugfs output for INTF in the mcp23s08 driver - Avoid divisions in context save/restore in pinctrl-single The rest is minor bug fixes or cleanups" * tag 'pinctrl-v4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (69 commits) pinctrl: nomadik: silence uninitialized variable warning pinctrl: axp209: Fix NULL pointer dereference after allocation pinctrl: samsung: Remove duplicated "wakeup" in printk pinctrl: ocelot: add support for interrupt controller pinctrl: intel: Don't shadow error code of gpiochip_lock_as_irq() pinctrl: berlin: fix 'pctrl->functions' allocation in berlin_pinctrl_build_state gpio: tegra: Move driver registration to subsys_init level pinctrl: tegra: Move drivers registration to arch_init level pinctrl: baytrail: actually print the apparently misconfigured pin MAINTAINERS: Replace Heikki as maintainer of Intel pinctrl pinctrl: freescale: off by one in imx1_pinconf_group_dbg_show() pinctrl: uniphier: add spi pin-mux settings pinctrl: cannonlake: Fix community ordering for H variant pinctrl: tegra: define GPIO compatible node per SoC pinctrl: intel: Do pin translation when lock IRQ pinctrl: imx: off by one in imx_pinconf_group_dbg_show() pinctrl: mediatek: include chained_irq.h header pinctrl/amd: only handle irq if it is pending and unmasked pinctrl/amd: fix gpio irq level in debugfs pinctrl: stm32: add syscfg mask parameter ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator由 Linus Torvalds 提交于
Pull regulator updates from Mark Brown: "The biggest set of changes in here is the addition of the Qualcomm RPMH driver. As well as the regualtor driver itself being quite large due to the usual involved Qualcomm regulator stuff there's also some code shared with the arm-soc tree, a bus driver required to communicate with the hardware that actually winds up being much larger than the regulator driver itself and a LLCC driver that was part of the same signed tag used with the arm-soc tree. Other than that it's a fairly standard and quiet release, highlights include: - Addition of device links from regulator consumers to their regulators, helping the core avoid dependency issues during suspend. - Support for the entertainingly innovative suspend implementation in the BD9571MWV. - Support for switch regulators on the PFUZE100, this required two goes due to backwards compatibility issues with old DTs that were discovered. - Support for Freescale PFUZE3001 and SocioNext UniPhier. - The aforementioned Qualcomm RPMH driver together with the driver changes required to support it" * tag 'regulator-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (52 commits) regulator: add QCOM RPMh regulator driver regulator: dt-bindings: add QCOM RPMh regulator bindings regulator: samsung: Add SPDX license identifiers regulator: maxim: Add SPDX license identifiers regulator: bd71837: adobt MFD changes to regulator driver regulator: tps65217: Fix NULL pointer dereference on probe regulator: Add support for CPCAP regulators on Motorola Xoom devices. regulator: Add sw2_sw4 voltage table to cpcap regulator. regulator: bd9571mwv: Make symbol 'dev_attr_backup_mode' static regulator: pfuze100: add support to en-/disable switch regulators regulator: pfuze100: add optional disable switch-regulators binding soc: qcom: rmtfs-mem: fix memleak in probe error paths soc: qcom: llc-slice: Add missing MODULE_LICENSE() drivers: qcom: rpmh: fix unwanted error check for get_tcs_of_type() drivers: qcom: rpmh-rsc: fix the loop index check in get_req_from_tcs firmware: qcom: scm: add a dummy qcom_scm_assign_mem() drivers: qcom: rpmh-rsc: Check cmd_db_ready() to help children drivers: qcom: rpmh-rsc: allow active requests from wake TCS drivers: qcom: rpmh: add support for batch RPMH request drivers: qcom: rpmh: allow requests to be sent asynchronously ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi由 Linus Torvalds 提交于
Pull spi updates from Mark Brown: "Quite an active release for the SPI subsystem, lots of small updates and fixes scattered about with highlights including: - 3-wire support in the GPIO driver. - support for setting a custom memory name in the memory mapped flash drivers. - support for extended mode in the Freescale DSPI controller. - support for the non-standard integration with the Microsemi Ocelot platform in the DesignWare driver. - new driver for the SocioNext UniPhier" * tag 'spi-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (47 commits) spi: davinci: fix a NULL pointer dereference spi: spi-mem: Constify spi_mem->name mtd: m25p80: Call spi_mem_get_name() to let controller set a custom name spi: spi-mem: Extend the SPI mem interface to set a custom memory name spi: spi-mem: Fix a typo in the documentation of struct spi_mem spi: uniphier: remove unnecessary include headers spi: spi-gpio: add SPI_3WIRE support spi: add flags parameter to txrx_word function pointers spi: add SPI controller driver for UniPhier SoC spi: add DT bindings for UniPhier SPI controller spi: dw: document Microsemi integration spi: img-spfi: Set device select bits for SPFI port state spi: omap2-mcspi: remove several redundant variables spi: dw-mmio: add MSCC Ocelot support spi: dw: export dw_spi_set_cs spi: spi-fsl-espi: Log fifo counters on error spi: imx: Use the longuest possible burst size when in dynamic_burst spi: imx: remove unnecessary check in spi_imx_can_dma spi: imx: Use correct number of bytes per words spi: imx: Use dynamic bursts only when bits_per_word is 8, 16 or 32 ...
-
由 Vlastimil Babka 提交于
The introduction of generic_max_swapfile_size and arch-specific versions has broken linking on x86 with CONFIG_SWAP=n due to undefined reference to 'generic_max_swapfile_size'. Fix it by compiling the x86-specific max_swapfile_size() only with CONFIG_SWAP=y. Reported-by: NTomas Pruzina <pruzinat@gmail.com> Fixes: 377eeaa8 ("x86/speculation/l1tf: Limit swap file size to MAX_PA/2") Signed-off-by: NVlastimil Babka <vbabka@suse.cz> Cc: stable@vger.kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap由 Linus Torvalds 提交于
Pull regmap updates from Mark Brown: "Several small new features for regmap this time around: - Support for SCCB, an I2C variant used on some media cards. This has also pulled in an I2C commit from Peter Rosin as a dependency. - Addition of an API for reading repeatedly from registers where the address doesn't automatically increment like some ADC outputs or GPIO status registers. - Support for bulk I/O on Slimbus" * tag 'regmap-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: Add regmap_noinc_read API regmap: sccb: fix typo and sort headers alphabetically i2c: smbus: add unlocked __i2c_smbus_xfer variant regmap: add SCCB support regmap: slimbus: add support to multi read/write
-
git://git.infradead.org/users/hch/configfs由 Linus Torvalds 提交于
Pull configfs updates from Christoph Hellwig: - simplify the cide by using kvasprintf (Bart Van Assche) - fix a gcc 8 string truncation warning by making the code simpler (Guenter Roeck) - fix a bug in rmdir() handling (Mike Christie) * tag 'configfs-for-4.19' of git://git.infradead.org/users/hch/configfs: configfs: fix registered group removal configfs: replace strncpy with memcpy configfs: use kvasprintf() instead of open-coding it
-
git://git.infradead.org/users/hch/dma-mapping由 Linus Torvalds 提交于
Pull dma-mapping updates from Christoph Hellwig: - a series from Robin to fix bus imposed dma limits by adding a separate mask for them to struct device instead of trying to squeeze a second meaning out of the existing dma mask as we did before. This has ACKs from the various other subsystems touched - a small swiotlb cleanup from Kees (acked by Konrad) - conversion of nios2 and sh to the new generic dma-noncoherent code. Various other architecture conversions will come through the architectures maintainers trees. * tag 'dma-mapping-4.19' of git://git.infradead.org/users/hch/dma-mapping: sh: use generic dma_noncoherent_ops sh: split arch/sh/mm/consistent.c sh: use dma_direct_ops for the CONFIG_DMA_COHERENT case sh: introduce a sh_cacheop_vaddr helper sh: simplify get_arch_dma_ops OF: Don't set default coherent DMA mask ACPI/IORT: Don't set default coherent DMA mask iommu/dma: Respect bus DMA limit for IOVAs of/device: Set bus DMA mask as appropriate ACPI/IORT: Set bus DMA mask as appropriate dma-mapping: Generalise dma_32bit_limit flag ACPI/IORT: Support address size limit for root complexes of/platform: Initialise default DMA masks nios2: use generic dma_noncoherent_ops swiotlb: clean up reporting dma-mapping: relax warning for per-device areas
-
git://git.kernel.org/pub/scm/linux/kernel/git/shli/md由 Linus Torvalds 提交于
Pull MD updates from Shaohua Li: "A few MD fixes for 4.19-rc1: - several md-cluster fixes from Guoqing - a data corruption fix from BingJing - other cleanups" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: md/raid5: fix data corruption of replacements after originals dropped drivers/md/raid5: Do not disable irq on release_inactive_stripe_list() call drivers/md/raid5: Use irqsave variant of atomic_dec_and_lock() md/r5cache: remove redundant pointer bio md-cluster: don't send msg if array is closing md-cluster: show array's status more accurate md-cluster: clear another node's suspend_area after the copy is finished
-
git://git.infradead.org/linux-mtd由 Linus Torvalds 提交于
Pull mtd updates from Boris Brezillon: "JFFS2 changes: - Support 64-bit timestamps MTD core changes: - Support sub-partitions - Clarify mtd_oob_ops documentation - Make Kconfig formatting consistent - Fix potential overflows in mtdchar_{write,read}() - Fallback to ->_{read,write}() when ->_{read,write}_oob() is missing and no OOB data were requested - Remove VLA usage in the bch lib MTD driver changes: - Use mtd_device_register() instead of mtd_device_parse_register() where applicable - Use proper printk format to print physical addresses in the solutionengine driver - Add missing mtd_set_of_node() call in the powernv driver - Remove unneeded variables in a few drivers - Plug the TRX part parser to the DT partition parsers logic - Check ioremap_cache() return code in the gpio-addr-flash driver - Stop using VMLINUX_SYMBOL_STR() in gen_probe.c SPI NOR core changes: - Apply reset hacks only when reset is explicitly marked as broken in the DT SPI NOR driver changes: - Minor cleanup/fixes in the m25p80 driver - Release flash_np in the nxp-spifi driver - Add suspend/resume hooks to the atmel-quadspi driver - Include gpio/consumer.h instead of gpio.h in the atmel-quadspi driver - Use %pK instead of %p in the stm32-quadspi driver - Improve timeout handling in the cadence-quadspi driver - Use mtd_device_register() instead of mtd_device_parse_register() in the intel-spi driver NAND core changes: - Add the SPI-NAND framework. - Create a helper to find the best ECC configuration. - Create NAND controller operations. - Allocate dynamically ONFI parameters structure. - Add defines for ONFI version bits. - Add manufacturer fixup for ONFI parameter page. - Add an option to specify NAND chip as a boot device. - Add Reed-Solomon error correction algorithm. - Better name for the controller structure. - Remove unused caller_is_module() definition. - Make subop helpers return unsigned values. - Expose _notsupp() helpers for raw page accessors. - Add default values for dynamic timings. - Kill the chip->scan_bbt() hook. - Rename nand_default_bbt() into nand_create_bbt(). - Start to clean the nand_chip structure. - Remove stale prototype from rawnand.h. Raw NAND controllers drivers changes: - Qcom: structuring cleanup. - Denali: use core helper to find the best ECC configuration. - Possible build of almost all drivers by adding a dependency on COMPILE_TEST for almost all of them in Kconfig, implies various fixes, Kconfig cleanup, GPIO headers inclusion cleanup, and even changes in sparc64 and ia64 architectures. - Clean the ->probe() functions error path of a lot of drivers. - Migrate all drivers to use nand_scan() instead of nand_scan_ident()/nand_scan_tail() pair. - Use mtd_device_register() where applicable to simplify the code. - Marvell: * Handle on-die ECC. * Better clocks handling. * Remove bogus comment. * Add suspend and resume support. - Tegra: add NAND controller driver. - Atmel: * Add module param to avoid using dma. * Drop Wenyou Yang from MAINTAINERS. - Denali: optimize timings handling. - FSMC: Stop using chip->read_buf(). - FSL: * Switch to SPDX license tag identifiers. * Fix qualifiers in MXC init functions. Raw NAND chip drivers changes: - Micron: * Add fixup for ONFI revision. * Update ecc_stats.corrected. * Make ECC activation stateful. * Avoid enabling/disabling ECC when it can't be disabled. * Get the actual number of bitflips. * Allow forced on-die ECC. * Support 8/512 on-die ECC. * Fix on-die ECC detection logic. - Hynix: * Fix decoding the OOB size on H27UCG8T2BTR. * Use ->exec_op() in hynix_nand_reg_write_op()" * tag 'mtd/for-4.19' of git://git.infradead.org/linux-mtd: (188 commits) mtd: rawnand: atmel: Select GENERIC_ALLOCATOR MAINTAINERS: drop Wenyou Yang from Atmel NAND driver support mtd: rawnand: allocate dynamically ONFI parameters during detection mtd: spi-nor: only apply reset hacks to broken hardware mtd: spi-nor: cadence-quadspi: fix timeout handling mtd: spi-nor: atmel-quadspi: Include gpio/consumer.h instead of gpio.h mtd: spi-nor: intel-spi: use mtd_device_register() mtd: spi-nor: stm32-quadspi: replace "%p" with "%pK" mtd: spi-nor: atmel-quadspi: add suspend/resume hooks mtd: rawnand: allocate model parameter dynamically mtd: rawnand: do not export nand_scan_[ident|tail]() anymore mtd: rawnand: txx9ndfmc: convert driver to nand_scan() mtd: rawnand: txx9ndfmc: clarify ECC parameters assignation mtd: rawnand: tegra: convert driver to nand_scan() mtd: rawnand: jz4740: convert driver to nand_scan() mtd: rawnand: jz4740: group nand_scan_{ident, tail} calls mtd: rawnand: jz4740: fix probe function error path mtd: rawnand: docg4: convert driver to nand_scan() mtd: rawnand: do not execute nand_scan_ident() if maxchips is zero mtd: rawnand: atmel: convert driver to nand_scan() ...
-
由 Linus Torvalds 提交于
Nobody commented on this patch back in July. So now it gets merged. * SCSI_IOCTL_SEND_COMMAND cleanup: scsi sg: remove incorrect scsi command checking logic
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull block updates from Jens Axboe: "First pull request for this merge window, there will also be a followup request with some stragglers. This pull request contains: - Fix for a thundering heard issue in the wbt block code (Anchal Agarwal) - A few NVMe pull requests: * Improved tracepoints (Keith) * Larger inline data support for RDMA (Steve Wise) * RDMA setup/teardown fixes (Sagi) * Effects log suppor for NVMe target (Chaitanya Kulkarni) * Buffered IO suppor for NVMe target (Chaitanya Kulkarni) * TP4004 (ANA) support (Christoph) * Various NVMe fixes - Block io-latency controller support. Much needed support for properly containing block devices. (Josef) - Series improving how we handle sense information on the stack (Kees) - Lightnvm fixes and updates/improvements (Mathias/Javier et al) - Zoned device support for null_blk (Matias) - AIX partition fixes (Mauricio Faria de Oliveira) - DIF checksum code made generic (Max Gurtovoy) - Add support for discard in iostats (Michael Callahan / Tejun) - Set of updates for BFQ (Paolo) - Removal of async write support for bsg (Christoph) - Bio page dirtying and clone fixups (Christoph) - Set of bcache fix/changes (via Coly) - Series improving blk-mq queue setup/teardown speed (Ming) - Series improving merging performance on blk-mq (Ming) - Lots of other fixes and cleanups from a slew of folks" * tag 'for-4.19/block-20180812' of git://git.kernel.dk/linux-block: (190 commits) blkcg: Make blkg_root_lookup() work for queues in bypass mode bcache: fix error setting writeback_rate through sysfs interface null_blk: add lock drop/acquire annotation Blk-throttle: reduce tail io latency when iops limit is enforced block: paride: pd: mark expected switch fall-throughs block: Ensure that a request queue is dissociated from the cgroup controller block: Introduce blk_exit_queue() blkcg: Introduce blkg_root_lookup() block: Remove two superfluous #include directives blk-mq: count the hctx as active before allocating tag block: bvec_nr_vecs() returns value for wrong slab bcache: trivial - remove tailing backslash in macro BTREE_FLAG bcache: make the pr_err statement used for ENOENT only in sysfs_attatch section bcache: set max writeback rate when I/O request is idle bcache: add code comments for bset.c bcache: fix mistaken comments in request.c bcache: fix mistaken code comments in bcache.h bcache: add a comment in super.c bcache: avoid unncessary cache prefetch bch_btree_node_get() bcache: display rate debug parameters to 0 when writeback is not running ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Merge L1 Terminal Fault fixes from Thomas Gleixner: "L1TF, aka L1 Terminal Fault, is yet another speculative hardware engineering trainwreck. It's a hardware vulnerability which allows unprivileged speculative access to data which is available in the Level 1 Data Cache when the page table entry controlling the virtual address, which is used for the access, has the Present bit cleared or other reserved bits set. If an instruction accesses a virtual address for which the relevant page table entry (PTE) has the Present bit cleared or other reserved bits set, then speculative execution ignores the invalid PTE and loads the referenced data if it is present in the Level 1 Data Cache, as if the page referenced by the address bits in the PTE was still present and accessible. While this is a purely speculative mechanism and the instruction will raise a page fault when it is retired eventually, the pure act of loading the data and making it available to other speculative instructions opens up the opportunity for side channel attacks to unprivileged malicious code, similar to the Meltdown attack. While Meltdown breaks the user space to kernel space protection, L1TF allows to attack any physical memory address in the system and the attack works across all protection domains. It allows an attack of SGX and also works from inside virtual machines because the speculation bypasses the extended page table (EPT) protection mechanism. The assoicated CVEs are: CVE-2018-3615, CVE-2018-3620, CVE-2018-3646 The mitigations provided by this pull request include: - Host side protection by inverting the upper address bits of a non present page table entry so the entry points to uncacheable memory. - Hypervisor protection by flushing L1 Data Cache on VMENTER. - SMT (HyperThreading) control knobs, which allow to 'turn off' SMT by offlining the sibling CPU threads. The knobs are available on the kernel command line and at runtime via sysfs - Control knobs for the hypervisor mitigation, related to L1D flush and SMT control. The knobs are available on the kernel command line and at runtime via sysfs - Extensive documentation about L1TF including various degrees of mitigations. Thanks to all people who have contributed to this in various ways - patches, review, testing, backporting - and the fruitful, sometimes heated, but at the end constructive discussions. There is work in progress to provide other forms of mitigations, which might be less horrible performance wise for a particular kind of workloads, but this is not yet ready for consumption due to their complexity and limitations" * 'l1tf-final' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (75 commits) x86/microcode: Allow late microcode loading with SMT disabled tools headers: Synchronise x86 cpufeatures.h for L1TF additions x86/mm/kmmio: Make the tracer robust against L1TF x86/mm/pat: Make set_memory_np() L1TF safe x86/speculation/l1tf: Make pmd/pud_mknotpresent() invert x86/speculation/l1tf: Invert all not present mappings cpu/hotplug: Fix SMT supported evaluation KVM: VMX: Tell the nested hypervisor to skip L1D flush on vmentry x86/speculation: Use ARCH_CAPABILITIES to skip L1D flush on vmentry x86/speculation: Simplify sysfs report of VMX L1TF vulnerability Documentation/l1tf: Remove Yonah processors from not vulnerable list x86/KVM/VMX: Don't set l1tf_flush_l1d from vmx_handle_external_intr() x86/irq: Let interrupt handlers set kvm_cpu_l1tf_flush_l1d x86: Don't include linux/irq.h from asm/hardirq.h x86/KVM/VMX: Introduce per-host-cpu analogue of l1tf_flush_l1d x86/irq: Demote irq_cpustat_t::__softirq_pending to u16 x86/KVM/VMX: Move the l1tf_flush_l1d test to vmx_l1d_flush() x86/KVM/VMX: Replace 'vmx_l1d_flush_always' with 'vmx_l1d_flush_cond' x86/KVM/VMX: Don't set l1tf_flush_l1d to true from vmx_l1d_flush() cpu/hotplug: detect SMT disabled by BIOS ...
-
- 14 8月, 2018 13 次提交
-
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linux由 Linus Torvalds 提交于
Pull xfs updates from Darrick Wong: "This is the second part of the XFS changes for 4.19. The biggest changes are the removal of buffer heads frm XFS, a massive reworking of the deferred transaction operations handling code, the removal of the long defunct barrier/nobarrier mount options, and the addition of a few more online repair functions. Summary: - Use extent maps to track pagecache page status instead of bufferhead state. - Refactor pagecache read and write paths to use the new iomap library functions, which enable us to drop the old bufferhead code for pagesize == blocksize filesystems. - Set up parallel per-block-per-page metadata to track subpage information that was tracked by buffer heads, which enables us to drop the old bufferhead code for pagesize > blocksize filesystems. - Tie a deferred ops control structure to a transaction so that we can take advantage of an upper-level dfops without having to plumb pointer passing through the code. - Refactor the deferred ops code to track deferred ops as part of the transaction structure (instead of as a separate data structure) so that we can simplify the scoping rules around defer_ops. - Refactor twisty delwri buffer submission code to avoid deadlocks. - Shorten and fix indenting problems in the scrub code. - Detect obviously bad summary counts at mount and fix them. - Directly associate deferred ops control structure with a transaction so that callers no longer have to manage it themselves. - Remove a couple of IRIX-era inode macros. - Remove the long-deprecated 'barrier' and 'nobarrier' mount options. - Clean up the inode fork structure a bit. - Check for bad fs summary counter values in the superblock. - Reduce COW fork lookups during writeback. - Refactor the deferred ops control structures into the transaction structure, thereby eliminating the need for transaction users to handle the deferred ops as a separate data structure. - Add the ability to repair AG headers online. - Fix a crash due to insufficient return value checking. - Various fixes and cleanups" * tag 'xfs-4.19-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (155 commits) xfs: fix a null pointer dereference in xfs_bmap_extents_to_btree xfs: remove b_last_holder & associated macros iomap: Switch to offset_in_page for clarity xfs: Close race between direct IO and xfs_break_layouts() xfs: repair the AGI xfs: repair the AGFL xfs: repair the AGF xfs: remove dead error handling code in xfs_dquot_disk_alloc() xfs: use WRITE_ONCE to update if_seq xfs: fix a comment in xfs_log_reserve xfs: only validate summary counts on primary superblock xfs: substitute spaces with tabs xfs: fold dfops into the transaction xfs: always defer agfl block frees xfs: pass transaction to xfs_defer_add() xfs: replace xfs_defer_ops ->dop_pending with on-stack list xfs: cancel dfops on xfs_defer_finish() error xfs: clean out superfluous dfops dop params/vars xfs: drop dop param from xfs_defer_op_type ->finish_item() callback xfs: automatic dfops inode relogging ...
-
由 Rafael J. Wysocki 提交于
Merge updates of the ACPI battery and button drivers and support for a new OEM _OSI string for 4.19. * acpi-button: ACPI / button: fix defined but not used warning ACPI / button: increment wakeup count only when notified * acpi-battery: ACPI / battery: Do not export energy_full[_design] on devices without full_charge_capacity ACPI / battery: get rid of negations in conditions ACPI / battery: use specialized print macros ACPI / battery: reorder headers alphabetically ACPI / battery: drop inclusion of init.h ACPI: battery: remove redundant old_present check on insertion * acpi-osi: ACPI / OSI: Add OEM _OSI string to enable NVidia HDMI audio
-
由 Rafael J. Wysocki 提交于
Merge ACPI x86-specific changes, core updates, EC driver updates and APEI support updates for 4.19. These add a special platform driver for handling multiple I2C devices hooked up to the same device object in the ACPI tables, add some new quirks and remove one that is not needed any more. * acpi-x86: platform/x86: Add ACPI i2c-multi-instantiate pseudo driver ACPI / x86: utils: Remove status workaround from acpi_device_always_present() ACPI / x86: enable touchscreen on Dell Venue Pro 7139 * acpi-bus: ACPI: bus: Fix a pointer coding style issue Revert "ACPI / bus: Parse tables as term_list for Dell XPS 9570 and Precision M5530" * acpi-ec: ACPI / EC: Add another entry for Thinkpad X1 Carbon 6th ACPI / EC: Use ec_no_wakeup on ThinkPad X1 Yoga 3rd * acpi-apei: arm64 / ACPI: clean the additional checks before calling ghes_notify_sea()
-
由 Rafael J. Wysocki 提交于
Merge ACPICA changes and updates of the ACPI device properties framework for 4.19. These revert two ACPICA commits that are not needed any more and modify the properties graph support in ACPI to be more in-line with the analogous DT code. * acpica: ACPICA: Update version to 20180629 ACPICA: Revert "iASL compiler: allow compilation of externals with paths that refer to existing names" ACPICA: Revert "iASL: change processing of external op namespace nodes for correctness" * acpi-property: ACPI: property: graph: Update graph documentation to use generic references ACPI: property: graph: Improve graph documentation for port/ep numbering ACPI: property: graph: Fix graph documentation ACPI: property: Update documentation for hierarchical data extension 1.1 ACPI: property: Document key numbering for hierarchical data extension refs ACPI: property: Use data node name and reg property for graphs ACPI: property: Allow direct graph endpoint references ACPI: property: Make the ACPI graph API private ACPI: property: Document hierarchical data extension references ACPI: property: Allow making references to non-device nodes ACPI: Convert ACPI reference args to generic fwnode reference args
-
由 Rafael J. Wysocki 提交于
Merge cpufreq changes for 4.19. These are driver extensions, some driver and core fixes and a new tracepoint for the tracking of frequency limits changes (coming from Android). * pm-cpufreq: cpufreq: intel_pstate: Ignore turbo active ratio in HWP cpufreq: Fix a circular lock dependency problem cpu/hotplug: Add a cpus_read_trylock() function cpufreq: trace frequency limits change cpufreq: intel_pstate: Show different max frequency with turbo 3 and HWP cpufreq: pcc-cpufreq: Disable dynamic scaling on many-CPU systems cpufreq: qcom-kryo: Silently error out on EPROBE_DEFER cpufreq / CPPC: Add cpuinfo_cur_freq support for CPPC cpufreq: armada-37xx: Add AVS support dt-bindings: marvell: Add documentation for the Armada 3700 AVS binding cpufreq: imx6q/thermal: imx: register cooling device depending on OF cpufreq: intel_pstate: use match_string() helper
-
由 Rafael J. Wysocki 提交于
Merge devfreq changes and a new CPU idle time injection framework for 4.19. * powercap: powercap / idle_inject: Add an idle injection framework * pm-devfreq: PM / devfreq: rk3399_dmc: Fix duplicated opp table on reload. PM / devfreq: Init user limits from OPP limits, not viceversa PM / devfreq: rk3399_dmc: fix spelling mistakes. PM / devfreq: rk3399_dmc: do not print error when get supply and clk defer. dt-bindings: devfreq: rk3399_dmc: move interrupts to be optional. PM / devfreq: rk3399_dmc: remove wait for dcf irq event. dt-bindings: clock: add rk3399 DDR3 standard speed bins. dt-bindings: devfreq: rk3399_dmc: improve binding documentation. PM / devfreq: use put_device() instead of kfree() PM / devfreq: exynos-ppmu: Delete an error message for a failed memory allocation in exynos_ppmu_probe()
-
由 Rafael J. Wysocki 提交于
Merge changes in the PM core, system-wide PM infrastructure, generic power domains (genpd) framework, ACPI PM infrastructure and cpuidle for 4.19. * pm-core: driver core: Add flag to autoremove device link on supplier unbind driver core: Rename flag AUTOREMOVE to AUTOREMOVE_CONSUMER * pm-domains: PM / Domains: Introduce dev_pm_domain_attach_by_name() PM / Domains: Introduce option to attach a device by name to genpd PM / Domains: dt: Add a power-domain-names property * pm-sleep: PM / reboot: Eliminate race between reboot and suspend PM / hibernate: Mark expected switch fall-through x86/power/hibernate_64: Remove VLA usage PM / hibernate: cast PAGE_SIZE to int when comparing with error code * acpi-pm: ACPI / PM: save NVS memory for ASUS 1025C laptop ACPI / PM: Default to s2idle in all machines supporting LP S0 * pm-cpuidle: ARM: cpuidle: silence error on driver registration failure
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4由 Linus Torvalds 提交于
Pull ext4 updates from Ted Ts'o: - Convert content from the ext4 wiki to Documentation rst files so it is more likely to be updated as we add new features to ext4. - Add 64-bit timestamp support to ext4's superblock fields. - ... and the usual bug fixes and cleanups, including a Spectre gadget fixup and some hardening against maliciously corrupted file systems. * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (34 commits) ext4: remove unneeded variable "err" in ext4_mb_release_inode_pa() ext4: improve code readability in ext4_iget() ext4: fix spectre gadget in ext4_mb_regular_allocator() ext4: check for NUL characters in extended attribute's name ext4: use ext4_warning() for sb_getblk failure ext4: fix race when setting the bitmap corrupted flag ext4: reset error code in ext4_find_entry in fallback ext4: handle layout changes to pinned DAX mappings dax: dax_layout_busy_page() warn on !exceptional docs: fix up the obviously obsolete bits in the new ext4 documentation docs: add new ext4 superblock time extension fields docs: create filesystem internal section ext4: use swap macro in mext_page_double_lock ext4: check allocation failure when duplicating "data" in ext4_remount() ext4: fix warning message in ext4_enable_quotas() ext4: super: extend timestamps to 40 bits jbd2: replace current_kernel_time64 with ktime equivalent ext4: use timespec64 for all inode times ext4: use ktime_get_real_seconds for i_dtime ext4: use 64-bit timestamps for mmp_time ...
-
git://git.samba.org/sfrench/cifs-2.6由 Linus Torvalds 提交于
Pull cifs updates from Steve French: "smb3/cifs fixes (including 8 for stable). Other improvements include: - improved tracing, improved stats - snapshots (previous version mounts work now over SMB3) - performance (compounding enabled for statfs, ~40% faster). - security (make it possible to build cifs.ko with insecure vers=1.0 disabled in Kconfig)" * tag '4.19-smb3' of git://git.samba.org/sfrench/cifs-2.6: (43 commits) smb3: create smb3 equivalent alias for cifs pseudo-xattrs smb3: allow previous versions to be mounted with snapshot= mount parm cifs: don't show domain= in mount output when domain is empty cifs: add missing support for ACLs in SMB 3.11 smb3: enumerating snapshots was leaving part of the data off end cifs: update smb2_queryfs() to use compounding cifs: update receive_encrypted_standard to handle compounded responses cifs: create SMB2_open_init()/SMB2_open_free() helpers. cifs: add SMB2_query_info_[init|free]() cifs: add SMB2_close_init()/SMB2_close_free() smb3: display stats counters for number of slow commands CIFS: fix uninitialized ptr deref in smb2 signing smb3: Do not send SMB3 SET_INFO if nothing changed smb3: fix minor debug output for CONFIG_CIFS_STATS smb3: add tracepoint for slow responses cifs: add compound_send_recv() cifs: make smb_send_rqst take an array of requests cifs: update init_sg, crypt_message to take an array of rqst smb3: update readme to correct information about /proc/fs/cifs/Stats smb3: fix reset of bytes read and written stats ...
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linux由 Linus Torvalds 提交于
Pull fs iomap refactoring from Darrick Wong: "This is the first part of the XFS changes for 4.19. Christoph and Andreas coordinated some refactoring work on the iomap code in preparation for removing buffer heads from XFS and porting gfs2 to iomap. I'm sending this small pull request ahead of the main XFS merge to avoid holding up gfs2 unnecessarily" * 'iomap-4.19-merge' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: iomap: add inline data support to iomap_readpage_actor iomap: support direct I/O to inline data iomap: refactor iomap_dio_actor iomap: add initial support for writes without buffer heads iomap: add an iomap-based readpage and readpages implementation iomap: add private pointer to struct iomap iomap: add a page_done callback iomap: generic inline data handling iomap: complete partial direct I/O writes synchronously iomap: mark newly allocated buffer heads as new fs: factor out a __generic_write_end helper
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux由 Linus Torvalds 提交于
Pull btrfs updates from David Sterba: "Mostly fixes and cleanups, nothing big, though the notable thing is the inserted/deleted lines delta -1124. User visible changes: - allow defrag on opened read-only files that have rw permissions; similar to what dedupe will allow on such files Core changes: - tree checker improvements, reported by fuzzing: * more checks for: block group items, essential trees * chunk type validation * mount time cross-checks that physical and logical chunks match * switch more error codes to EUCLEAN aka EFSCORRUPTED Fixes: - fsync corner case fixes - fix send failure when root has deleted files still open - send, fix incorrect file layout after hole punching beyond eof - fix races between mount and deice scan ioctl, found by fuzzing - fix deadlock when delayed iput is called from writeback on the same inode; rare but has been observed in practice, also removes code - fix pinned byte accounting, using the right percpu helpers; this should avoid some write IO inefficiency during low space conditions - don't remove block group that still has pinned bytes - reset on-disk device stats value after replace, otherwise this would report stale values for the new device Cleanups: - time64_t/timespec64 cleanups - remove remaining dead code in scrub handling NOCOW extents after disabling it in previous cycle - simplify fsync regarding ordered extents logic and remove all the related code - remove redundant arguments in order to reduce stack space consumption - remove support for V0 type of extents, not in use since 2.6.30 - remove several unused structure members - fewer indirect function calls by inlining some callbacks - qgroup rescan timing fixes - vfs: iget cleanups" * tag 'for-4.19-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (182 commits) btrfs: revert fs_devices state on error of btrfs_init_new_device btrfs: Exit gracefully when chunk map cannot be inserted to the tree btrfs: Introduce mount time chunk <-> dev extent mapping check btrfs: Verify that every chunk has corresponding block group at mount time btrfs: Check that each block group has corresponding chunk at mount time Btrfs: send, fix incorrect file layout after hole punching beyond eof btrfs: Use wrapper macro for rcu string to remove duplicate code btrfs: simplify btrfs_iget btrfs: lift make_bad_inode into btrfs_iget btrfs: simplify IS_ERR/PTR_ERR checks btrfs: btrfs_iget never returns an is_bad_inode inode btrfs: replace: Reset on-disk dev stats value after replace btrfs: extent-tree: Remove unused __btrfs_free_block_rsv btrfs: backref: Use ERR_CAST to return error code btrfs: Remove redundant btrfs_release_path from btrfs_unlink_subvol btrfs: Remove root parameter from btrfs_unlink_subvol btrfs: Remove fs_info from btrfs_add_root_ref btrfs: Remove fs_info from btrfs_del_root_ref btrfs: Remove fs_info from btrfs_del_root btrfs: Remove fs_info from btrfs_delete_delayed_dir_index ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux由 Linus Torvalds 提交于
Pull file locking updates from Jeff Layton: "Just a couple of patches from Konstantin to fix /proc/locks when the process that set the lock has exited, and a new tracepoint for the flock() codepath. Also threw in mailmap entries for my addresses and a comment cleanup" * tag 'locks-v4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux: locks: remove misleading obsolete comment mailmap: remap some of my email addresses to kernel.org address locks: add tracepoint in flock codepath fs/lock: show locks taken by processes from another pidns fs/lock: skip lock owner pid translation in case we are in init_pid_ns
-
由 Linus Torvalds 提交于
Merge branches 'work.misc' and 'work.dcache' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc vfs updates from Al Viro: "Misc cleanups from various folks all over the place I expected more fs/dcache.c cleanups this cycle, so that went into a separate branch. Said cleanups have missed the window, so in the hindsight it could've gone into work.misc instead. Decided not to cherry-pick, thus the 'work.dcache' branch" * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: dcache: Use true and false for boolean values fold generic_readlink() into its only caller fs: shave 8 bytes off of struct inode fs: Add more kernel-doc to the produced documentation fs: Fix attr.c kernel-doc removed extra extern file_fdatawait_range * 'work.dcache' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: kill dentry_update_name_case()
-