Make bcm5974 report raw multi-touch (MT) data in the form of ABS_MT events.

[dtor@mail.ru: get rid of module option, always report all events]
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Add a function pointer in the platform data of the DaVinci Keyscan driver
called device_enable, in order to perform board specific actions when
the device is initialized, like setup the PINMUX configuration.
Signed-off-by: NMiguel Aguilar <miguel.aguilar@ridgerun.com>
Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

When using realtime signals, we'll enqueue one signal for every event.
This is unfortunate, because (for example) keyboard presses are three
events: key, msc scancode, and syn.  They'll be enqueued fast enough in
kernel space that all three events will be ready to read by the time
userspace runs, so the first invocation of the signal handler will read
all three events, but then the second two invocations still have to run
to do no work.

Instead, only send the SIGIO notification on syn events.  This is a
slight abuse of SIGIO semantics, in principle it ought to fire as soon
as any events are readable.  But it matches evdev semantics, which is
more important since SIGIO is rather vaguely defined to begin with.
Signed-off-by: NAdam Jackson <ajax@redhat.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

We need to first unregister input device and only then cancel event work
since events can arrive (and cause event work to get scheduled again)
until input_unregister_device() returns.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

sysfs_remove_group() waits for sysfs attributes to be removed, therefore
we do not need to worry about driver-specific attributes being accessed
after driver has been detached from the device. In fact, attempts to take
serio->drv_mutex in attribute methods may lead to the following deadlock:

                                          sysfs_read_file()
                                            fill_read_buffer()
                                              sysfs_get_active_two()
                                                psmouse_attr_show_helper()
                                                  serio_pin_driver()
serio_disconnect_driver()
  mutex_lock(&serio->drv_mutex);
                                <-------->        mutex_lock(&serio_drv_mutex);
    psmouse_disconnect()
      sysfs_remove_group(... psmouse_attr_group);
        ....
        sysfs_deactivate();
          wait_for_completion();

Fix this by removing calls to serio_[un]pin_driver() and functions themselves
and using driver-private mutexes to serialize access to attribute's set()
methods that may change device state.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

This always evaluates to true.
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

We need to wait for the command to disable FF effects to complete before
continuing with closing the device.
Tested-by: NJohannes Ebke <johannes.ebke@physik.uni-muenchen.de>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NFelipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NFelipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Lifebook protocol can only be activated if we find known DMI signature.
It is useles without DMI.
Reported-by: NRakib Mullick <rakib.mullick@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

This should fix the following compile warning:

drivers/input/misc/wistron_btns.c:1331:5: warning: "CONFIG_PM" is not defined
Signed-off-by: NRakib Mullick <rakib.mullick@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

The variable 'dev' is unused in function 'hgpk_register'.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

On certain boards not all GPIOs may be used as wakeup sources, in which
case some of enable_irq_wake() calls will fail. On resume calling
disable_irq_wake() will warn about unbalanced IRQ wake disable.

Solve this by checking whether enable_irq_wake() succeeded or not and
no not call disable_irq_wake() for these GPIOs/IRQs that have not been
enabled.
Reported-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Do not try to free iforce device when we closing input device; disconnect
is the only place where it should be deleted.
Reported-by: NJohannes Ebke <johannes.ebke@physik.uni-muenchen.de>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

This adds simple direction calculation when combining effects. It's useful
to decide motor direction for rumble (vibrator).
Signed-off-by: NJari Vanhala <ext-jari.vanhala@nokia.com>
Acked-by: NAnssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

The commit 9e68177e changed 'gain' from
signed to unsigned to fix an issue with rumble effect calculation, however
it introduced problems when calculating constant effects. Having 'gain'
being unsigned int was an unfortunate choice since it dominates all
implicit type conversions causing everything to be treated as unsigned
int.

Let's change it back to signed int and simply add proper casts to rumble
effect calculations.
Reported-by: NGary Stein <lordcnidarian@gmail.com>
Acked-by: NAnssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Instead of waiting for the next timer tick to start playing an effect
do it immediately. This mostly helps systems using low HZ setting.
Signed-off-by: NJari Vanhala <ext-jari.vanhala@nokia.com>
Acked-by: NAnssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

We used to make kseriod freezable to prevent unnecessary attempts at
resuming keyboard and mouse before taking hibernation image when suspend
and hibernation were sharing PM operations. Now that they are separated
and we don't risk resuming during 'thaw' we don't need to freeze kseriod
anymore. This will allow us to start resetting mouse and keyboard a bit
earlier, before rest of the userspace comes back up.
Acked-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Instead of doing full-blown reset while suspending or shutting down
the box use lighter form of reset that should take less time.
Tested-by: NAlan Stern <stern@rowland.harvard.edu>
Tested-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Properly handle version of the protocol where standard PS/2 packets
from trackpoint are stuffed into middle (byte 3-6) of the standard
ALPS packets when both the touchpad and trackpoint are used together.

The patch is based on work done by Matthew Chapman and additional
research done by David Kubicek and Erik Osterholm:

	https://bugs.launchpad.net/ubuntu/+source/linux/+bug/296610

Many thanks to David Kubicek for his efforts in researching fine points
of this new version of the protocol, especially interaction between pad
and stick in these models.
Signed-off-by: NSebastian Kapfer <sebastian_kapfer@gmx.net>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

The commit 66d2a595 introduces a bug:
for every beep requested, a bell is also generated.
Reported-by: NPaul Martin <pm@debian.org>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

ps2if->irq is unsigned so the test does not work.
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

This driver provides support for the touchscreen interface
integrated into the Freescale MC13783.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: NLuotao Fu <l.fu@pengutronix.de>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

This driver was merged before the ep93xx core support was added
for the keypad clock and acquiring/releasing the necessary gpio's.
Now that the proper support is in the ep93xx core this driver
needs to be updated to work correctly.

Summary of changes:
  1) Remove some unused members from the platform data.
  2) Remove the custom KEY macro and use the ones available in
     <linux/input/matrix_keypad.h>
  3) Remove the keypad_{readl/writel} macros and just use
     __raw_{readl/writel} directly.
  4) Update the clk_set_rate() call to work with the core support.
  5) Cleanup the probe routine and remove some unneeded messages.
  6) Use the ep93xx core functions to acquire and release the gpio's.
  7) Fix the clk_get() call to get the keypad clock.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Since Graphire/Bamboo devices report pen and expresskeys in the same
data packet, we need to send a input_sync event to separate pen data
from expresskeys for X11 driver to process them properly.
Signed-off-by: NPing Cheng <pingc@wacom.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NPing Cheng <pingc@wacom.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

This adds support for the foolowing Wacom devices:

 - 0x9F - a single touch only LCD tablet;
 - 0xE2 - a two finger touch only LCD tablet;
 - 0xE3 -  a two finger touch, penabled LCD tablet.
Signed-off-by: NPing Cheng <pingc@wacom.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NPing Cheng <pingc@wacom.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Call wacom_query_tablet_data() from wacom_resume() so the device will be
switched to Wacom mode upon resume. Devices that require this are: regular
tablets and two finger touch devices.
Signed-off-by: NPing Cheng <pingc@wacom.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

We can't use msleep() while holding a spinlock, moreower serio's write()
method is supposed to be useable from inettrupt context. Let's do what
i8042 does and poll the status register every 50 us (with udelay).
Reported-by: NMarjan Fojkar <marjan@pajkc.eu>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Gigabyte netbook model M1022M requires i8042.noloop, otherwise AUX port
will not detected and the touchpad will not work. Unfortunately chassis
type in DMI set to "Other" and thus generic laptop entry does not fire
on it.
Reported-by: NDarryl Bond <dbond@nrggos.com.au>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6:
  udf: Avoid IO in udf_clear_inode
  udf: Try harder when looking for VAT inode
  udf: Fix compilation with UDFFS_DEBUG enabled

It is not very good to do IO in udf_clear_inode. First, VFS does not really
expect inode to become dirty there and thus we have to write it ourselves,
second, memory reclaim gets blocked waiting for IO when it does not really
expect it, third, the IO pattern (e.g. on umount) resulting from writes in
udf_clear_inode is bad and it slows down writing a lot.

The reason why UDF needed to do IO in udf_clear_inode is that UDF standard
mandates extent length to exactly match inode size. But when we allocate
extents to a file or directory, we don't really know what exactly the final
file size will be and thus temporarily set it to block boundary and later
truncate it to exact length in udf_clear_inode. Now, this is changed to
truncate to final file size in udf_release_file for regular files. For
directories and symlinks, we do the truncation at the moment when learn
what the final file size will be.
Signed-off-by: NJan Kara <jack@suse.cz>

Some disks do not contain VAT inode in the last recorded block as required
by the standard but a few blocks earlier (or the number of recorded blocks
is wrong). So look for the VAT inode a bit before the end of the media.
Signed-off-by: NJan Kara <jack@suse.cz>

Signed-off-by: NJan Kara <jack@suse.cz>

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, mce: Clean up thermal init by introducing intel_thermal_supported()
  x86, mce: Thermal monitoring depends on APIC being enabled
  x86: Gart: fix breakage due to IOMMU initialization cleanup
  x86: Move swiotlb initialization before dma32_free_bootmem
  x86: Fix build warning in arch/x86/mm/mmio-mod.c
  x86: Remove usedac in feature-removal-schedule.txt
  x86: Fix duplicated UV BAU interrupt vector
  nvram: Fix write beyond end condition; prove to gcc copy is safe
  mm: Adjust do_pages_stat() so gcc can see copy_from_user() is safe
  x86: Limit the number of processor bootup messages
  x86: Remove enabling x2apic message for every CPU
  doc: Add documentation for bootloader_{type,version}
  x86, msr: Add support for non-contiguous cpumasks
  x86: Use find_e820() instead of hard coded trampoline address
  x86, AMD: Fix stale cpuid4_info shared_map data in shared_cpu_map cpumasks

Trivial percpu-naming-introduced conflicts in arch/x86/kernel/cpu/intel_cacheinfo.c

* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6:
  pcmcia: CodingStyle fixes
  pcmcia: remove unused IRQ_FIRST_SHARED

* 'next-spi' of git://git.secretlab.ca/git/linux-2.6: (23 commits)
  spi: fix probe/remove section markings
  Add OMAP spi100k driver
  spi-imx: don't access struct device directly but use dev_get_platdata
  spi-imx: Add mx25 support
  spi-imx: use positive logic to distinguish cpu variants
  spi-imx: correct check for platform_get_irq failing
  ARM: NUC900: Add spi driver support for nuc900
  spi: SuperH MSIOF SPI Master driver V2
  spi: fix spidev compilation failure when VERBOSE is defined
  spi/au1550_spi: fix setupxfer not to override cfg with zeros
  spi/mpc8xxx: don't use __exit_p to wrap plat_mpc8xxx_spi_remove
  spi/i.MX: fix broken error handling for gpio_request
  spi/i.mx: drain MXC SPI transfer buffer when probing device
  MAINTAINERS: add SPI co-maintainer.
  spi/xilinx_spi: fix incorrect casting
  spi/mpc52xx-spi: minor cleanups
  xilinx_spi: add a platform driver using the xilinx_spi common module.
  xilinx_spi: add support for the DS570 IP.
  xilinx_spi: Switch to iomem functions and support little endian.
  xilinx_spi: Split into of driver and generic part.
  ...

Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf sched: Fix build failure on sparc
  perf bench: Add "all" pseudo subsystem and "all" pseudo suite
  perf tools: Introduce perf_session class
  perf symbols: Ditch dso->find_symbol
  perf symbols: Allow lookups by symbol name too
  perf symbols: Add missing "Variables" entry to map_type__name
  perf symbols: Add support for 'variable' symtabs
  perf symbols: Introduce ELF counterparts to symbol_type__is_a
  perf symbols: Introduce symbol_type__is_a
  perf symbols: Rename kthreads to kmaps, using another abstraction for it
  perf tools: Allow building for ARM
  hw-breakpoints: Handle bad modify_user_hw_breakpoint off-case return value
  perf tools: Allow cross compiling
  tracing, slab: Fix no callsite ifndef CONFIG_KMEMTRACE
  tracing, slab: Define kmem_cache_alloc_notrace ifdef CONFIG_TRACING

Trivial conflict due to different fixes to modify_user_hw_breakpoint()
in include/linux/hw_breakpoint.h