- 23 1月, 2019 9 次提交
-
-
由 Chris Wilson 提交于
Record the priority boost we giving to the preempted client or else we may end up in a situation where the priority queue no longer matches the request priority order and so we can end up in an infinite loop of preempting the same pair of requests. Fixes: e9eaf82d ("drm/i915: Priority boost for waiting clients") Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190123135155.21562-1-chris@chris-wilson.co.uk
-
由 Rodrigo Vivi 提交于
We just got aware that there was more IDs available at spec, so let's add them already. Cc: James Ausmus <james.ausmus@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com> Signed-off-by: NMika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190118055943.10252-1-rodrigo.vivi@intel.com
-
由 Daniele Ceraolo Spurio 提交于
When reading GEN11_GT_INTR_DWx closely after enabling the interrupts in gen11_irq_postinstall, the returned value is garbage. This can cause other parts of the setup code (e.g. gen11_reset_one_iir) to think that there are interrupts to be cleared when there are none. The garbage value is only seen on the first read done after the enable, so this looks like a posting issue. Adding a posting read after enabling the interrupts does indeed fix the problem. Note that the posting read has been purposely added outside of gen11_master_intr_enable since the issue has only been observed when the full interrupt setup is performed. Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Acked-by: NChris Wilson <chris@chris-wilson.co.uk> Acked-by: NMika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: NMika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190123023227.8117-1-daniele.ceraolospurio@intel.com
-
由 Jani Nikula 提交于
Mixed C99 and kernel types use is getting ugly. Prefer kernel types. sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g' v2: rebase Acked-by: NChris Wilson <chris@chris-wilson.co.uk> Acked-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190118120125.15484-1-jani.nikula@intel.com
-
由 José Roberto de Souza 提交于
The value of this registers will be used to test if PSR2 is doing selective update and if the number of blocks match with the expected. v2: - Using new macros - Changed the string output v3: - reading PSR2_SU_STATUS registers together(Dhinakaran) - printing SU blocks of frames with 0 updates(Dhinakaran) Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190117205548.28378-4-jose.souza@intel.com
-
由 José Roberto de Souza 提交于
This register contains how many blocks was sent in the past selective updates. Those registers are not kept set all the times but polling it after flip can show the values corresponding to the last 8 frames. v2: Improved macros(Dhinakaran) Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190117205548.28378-3-jose.souza@intel.com
-
由 José Roberto de Souza 提交于
The old debugfs fields was not following a naming partern and it was a bit confusing. So it went from: ~$ sudo more /sys/kernel/debug/dri/0/i915_edp_psr_status Sink_Support: yes PSR mode: PSR1 Enabled: yes Busy frontbuffer bits: 0x000 Main link in standby mode: no HW Enabled & Active bit: yes Source PSR status: 0x24050006 [SRDONACK] To: ~$ sudo more /sys/kernel/debug/dri/0/i915_edp_psr_status Sink support: yes [0x03] PSR mode: PSR1 enabled Source PSR ctl: enabled [0x81f00e26] Source PSR status: IDLE [0x04010006] Busy frontbuffer bits: 0x00000000 The 'Main link in standby mode' was removed as it is not useful but if needed by someone the information is still in the register value of 'Source PSR ctl' inside of the brackets, PSR mode and Enabled was squashed into PSR mode, some renames and reorders and we have this cleaner version. This will also make easy to parse debugfs for IGT tests. v2: Printing sink PSR version with only 2 hex digits as it is a byte Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Suggested-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Acked-by: NRodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190117205548.28378-2-jose.souza@intel.com
-
由 José Roberto de Souza 提交于
For now PSR2 is still disabled by default for all platforms but is our intention to let debugfs to enable it for debug and tests proporses, so intel_psr2_enabled() that is also used by debugfs to decide if PSR2 is going to be enabled needs to take in consideration the debug field. v2: Using the switch/case that intel_psr2_enabled() already had to handle this(DK) Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190117205548.28378-1-jose.souza@intel.com
-
由 Rodrigo Vivi 提交于
We need avi infoframe stuff who got merged via drm-misc Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
-
- 22 1月, 2019 7 次提交
-
-
由 Chris Wilson 提交于
This turns out to be quite useful if one happens to be debugging semaphore deadlocks. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190121222117.23305-4-chris@chris-wilson.co.uk
-
由 Chris Wilson 提交于
A repeated pattern is to test the signaled bit of our request->fence.flags. Make this an inline to shorten a few lines and remove unnecessary line continuations. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190121222117.23305-20-chris@chris-wilson.co.uk
-
由 Chris Wilson 提交于
Prior to adding a third instance of intel_context_init() and extending the information stored therewithin, refactor out the common assignments. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NMatthew Auld <matthew.auld@intel.com> Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190121222117.23305-8-chris@chris-wilson.co.uk
-
由 Chris Wilson 提交于
Replace the open-coding of advance with a call instead. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190121222117.23305-19-chris@chris-wilson.co.uk
-
由 Chris Wilson 提交于
Before adding yet another copy of struct live_test and its handler, refactor the existing code into a common framework for live selftests. For many live selftests, we want to know if the GPU hung or otherwise misbehaved during the execution of the test (beyond any infraction in the behaviour under test), live_test provides this by comparing the GPU state before and after, alerting if it unexpectedly changed (e.g. the reset counter changed). It also ensures that the GPU is idle before and after the test, so that residual code running on the GPU is flushed before testing. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NMatthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190121222117.23305-5-chris@chris-wilson.co.uk
-
由 Chris Wilson 提交于
Some tests (e.g. igt_vma_pin1) presume that we have a completely clean GGTT so that it can probe boundaries without fear that something is already allocated there. However, the mock device is starting to get complicated and following similar rules to the live device, i.e. we can't guarantee that i915->ggtt remains clean, so create a temporary address_space equivalent to the mock ggtt for the purpose. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NMatthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190121222117.23305-7-chris@chris-wilson.co.uk
-
由 Chris Wilson 提交于
During review of commit 71fc448c ("drm/i915/selftests: Make evict tolerant of foreign objects"), Matthew mentioned it would be better if we explicitly tracked the objects we created. We have an obj->st_link hook for this purpose, so add the corresponding list of objects and reduce our loops to only consider our own list. References: 71fc448c ("drm/i915/selftests: Make evict tolerant of foreign objects") Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NMatthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190121222117.23305-6-chris@chris-wilson.co.uk
-
- 21 1月, 2019 10 次提交
-
-
由 Hans de Goede 提交于
The display engine has 2 dithering enable bits which both need to be set for dithering to happen, 1 in the PIPECONF register which is taken care of by i9xx_set_pipeconf() and a second bit at the encoder level. The dsi code was not setting the encoder level dithering enable bit causing dithering to be disabled, this commit fixes this. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181201113148.23184-2-hdegoede@redhat.com
-
由 Hans de Goede 提交于
There are 3 problems with the dsi code's pipe_bpp handling for 6 bpc pixel-formats which this commit addresses: 1) It assumes that the pipe_bpp is the same as the bpp going over the dsi lanes. This assumption is not valid for MIPI_DSI_FMT_RGB666, where pipe_bpp should be 18 so that we do proper dithering but we actually send 24 bpp over the dsi lanes (MIPI_DSI_FMT_RGB666_PACKED sends 18 bpp). This assumption is enforced by an assert in *_dsi_get_pclk(). This assert triggers on the initial hw-state readback on BYT/CHT devices which use MIPI_DSI_FMT_RGB666, such as the Prowise PT301 tablet. PIPECONF is set to 6BPC / 18 bpp by the GOP, while mipi_dsi_pixel_format_to_bpp() returns 24. This commits switches the calculations in *_dsi_get_pclk() to use the bpp from mipi_dsi_pixel_format_to_bpp(intel_dsi->pixel_format) which returns the bpp going over the mipi lanes and drops the assert. 2) On BXT bxt_dsi_get_pipe_config() wrongly overrides the pipe_bpp which i9xx_get_pipe_config() reads from PIPECONF with the return value from mipi_dsi_pixel_format_to_bpp(). This avoids the assert from 1. but is wrong since the pipe is actually running at the value configured in PIPECONF. This commit drops the override of pipe_bpp from bxt_dsi_get_pipe_config(). 3) The dsi encoder's compute_config() never assigns a value to pipe_bpp, unlike most other encoders. Falling back on compute_baseline_pipe_bpp() which always picks 24. 24 is only correct for MIPI_DSI_FMT_RGB88 for the others we should use 18 bpp so that we correctly do 6bpc color dithering. This commit adds code to intel_dsi_compute_config() to properly set pipe_bpp based on intel_dsi->pixel_format. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181201113148.23184-1-hdegoede@redhat.com
-
由 Chris Wilson 提交于
We are not allowed to assign rq->global_seqno=0 as it has a special meaning of "inactive" (not executing on HW). Fixes: 6faf5916 ("drm/i915: Remove HW semaphores for gen7 inter-engine synchronisation") Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190119143024.26971-1-chris@chris-wilson.co.uk
-
由 Jani Nikula 提交于
Mixed C99 and kernel types use is getting ugly. Prefer kernel types. sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g' Minor checkpatch fixes sprinkled on top of the changed lines. Acked-by: NChris Wilson <chris@chris-wilson.co.uk> Acked-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190118120125.15484-8-jani.nikula@intel.com
-
由 Jani Nikula 提交于
Mixed C99 and kernel types use is getting ugly. Prefer kernel types. sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g' Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Acked-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190118120125.15484-7-jani.nikula@intel.com
-
由 Jani Nikula 提交于
Mixed C99 and kernel types use is getting ugly. Prefer kernel types. sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g' Acked-by: NChris Wilson <chris@chris-wilson.co.uk> Acked-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190118120125.15484-6-jani.nikula@intel.com
-
由 Jani Nikula 提交于
Mixed C99 and kernel types use is getting ugly. Prefer kernel types. sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g' Minor checkpatch/whitepace fixes sprinkled on top of the changed lines. v2: more whitespace fixes (Ville, José) Acked-by: NChris Wilson <chris@chris-wilson.co.uk> Acked-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190118120125.15484-5-jani.nikula@intel.com
-
由 Jani Nikula 提交于
Mixed C99 and kernel types use is getting ugly. Prefer kernel types. sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g' Acked-by: NChris Wilson <chris@chris-wilson.co.uk> Acked-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190118120125.15484-4-jani.nikula@intel.com
-
由 Jani Nikula 提交于
Mixed C99 and kernel types use is getting ugly. Prefer kernel types. sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g' Minor checkpatch fixes sprinkled on top of the changed lines. Acked-by: NChris Wilson <chris@chris-wilson.co.uk> Acked-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190118120125.15484-3-jani.nikula@intel.com
-
由 Jani Nikula 提交于
Mixed C99 and kernel types use is getting ugly. Prefer kernel types. sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g' Acked-by: NChris Wilson <chris@chris-wilson.co.uk> Acked-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190118120125.15484-2-jani.nikula@intel.com
-
- 19 1月, 2019 1 次提交
-
-
由 Chris Wilson 提交于
To correctly simulate preemption between contexts, we need independent timelines along each context. Make it so. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190118190805.11792-1-chris@chris-wilson.co.uk
-
- 18 1月, 2019 8 次提交
-
-
由 Jani Nikula 提交于
It's superfluous. Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/7987938a7950853ac3ee43c82fb9cbb0cd59a2fa.1547726792.git.jani.nikula@intel.com
-
由 Chris Wilson 提交于
The evict selftests presumed that all objects in use had been allocated by itself. This is a dubious claim and so instead of asserting complete control over the object lists, take (temporary) ownership of them instead. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190118113632.7056-1-chris@chris-wilson.co.uk
-
由 Chris Wilson 提交于
Since commit d4ccceb0 ("drm/i915/icl: Ringbuffer interrupt handling") we have required a mechanism to avoid touching the interrupt hardware for breadcrumbs, superseding our mock interface for selftests. The residual problem (ideas welcome) is in probing the mock ring registers for ring_is_idle. Hmm, maybe we should just install mock handlers for i915->uncore.mmio__write and friends? Only problem being is that we would to truly mock some expected reads. :( References: d4ccceb0 ("drm/i915/icl: Ringbuffer interrupt handling") Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190118112225.13780-1-chris@chris-wilson.co.uk
-
由 Chris Wilson 提交于
Since we have the ppgtt we want to test, we can ask it directly if it is suitable for the hugepage test we intend to undertake. v2: Not everyone has full-ppgtt Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by: NMatthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190117230512.4789-1-chris@chris-wilson.co.uk
-
由 Chris Wilson 提交于
The motivation for introducing the check that we only enable breadcrumb irqs if the device's irq was installed was once upon a time we waited during suspend after disabling interrupts (which was quite slow until the bug was discovered). Since then we have the notion of pinning the breadcrumb irq, broadening it from the sole purpose of user interrupt notification and waiting, and more importantly decoupling it from a very defined time period during which enabling the irq was expected. So stop insisting the irq is installed before we setup our IMR masks, if the IER isn't yet enabled, nothing will happen and we will timeout instead, revealing the lack of irq in the hang debug messages. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190117233126.30165-1-chris@chris-wilson.co.uk
-
由 Tvrtko Ursulin 提交于
To avoid a false positive of a leaked wakeref, we can store the cookie in file->private_data and use it in intel_runtime_pm_put. Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190117144831.13156-1-tvrtko.ursulin@linux.intel.com
-
git://anongit.freedesktop.org/drm/drm-misc由 Dave Airlie 提交于
drm-misc-next for 5.1: UAPI Changes: - New fourcc identifier for ARM Framebuffer Compression v1.3 Cross-subsystem Changes: Core Changes: - Reorganisation of drm_device and drm_framebuffer headers - Cleanup of the drmP inclusion - Fix leaks in the fb-helpers - Allow for depth different from bpp in fb-helper fbdev emulation - Remove drm_mode_object from drm_display_mode Driver Changes: - Add reflection properties to rockchip - a bunch of fixes for virtio - a bunch of fixes for dp_mst and drivers using it, and introduction of a new refcounting scheme - Convertion of bochs to atomic and generic fbdev emulation - Allow meson to remove the firmware framebuffers [airlied: patch rcar-du to add drm_modes.h] Signed-off-by: NDave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190116200428.u2n4jbk4mzza7n6e@flea
-
由 Chris Wilson 提交于
Let static analyzers (smatch) know that we are not going to wander off the end of the array by providing a tight upper bound: drivers/gpu/drm/i915/intel_display.c:9532 hsw_get_transcoder_state() error: buffer overflow 'dev_priv->__info.trans_offsets' 6 <= 31 References: 0716931a ("drm/i915/icl: fix transcoder state readout") Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Madhav Chauhan <madhav.chauhan@intel.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190116155421.7660-1-chris@chris-wilson.co.uk
-
- 17 1月, 2019 5 次提交
-
-
git://linuxtv.org/pinchartl/media由 Dave Airlie 提交于
Renesas display drivers changes for v5.1: - R8A774C0 support - D3/E3 RGB output routing fixes - Miscellaneous fixes - Constify drm_bridge .mode_set() arguments Signed-off-by: NDave Airlie <airlied@redhat.com> From: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/1743477.dgErSCK0Q8@avalon
-
由 Jani Nikula 提交于
Mixed C99 and kernel types use is getting ugly. Prefer kernel types. sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g' Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/63fe4b9727b55727190e50e57427f513d204f000.1547629303.git.jani.nikula@intel.com
-
由 Jani Nikula 提交于
Mixed C99 and kernel types use is getting ugly. Prefer kernel types. sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g' Minor checkpatch/whitespace fixes sprinkled on top of the changed lines. Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/3c030a12b4313eec512ce2b7a953cff439d8af67.1547629303.git.jani.nikula@intel.com
-
由 Jani Nikula 提交于
Mixed C99 and kernel types use is getting ugly. Prefer kernel types. sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g' Minor checkpatch/whitespace fixes sprinkled on top of the changed lines. Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/b73aefabb757acf59896bd77dbb20c2e343c6e6d.1547629303.git.jani.nikula@intel.com
-
由 Jani Nikula 提交于
Mixed C99 and kernel types use is getting ugly. Prefer kernel types. sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g' Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/b56d250007a5d85d15038962548abb3e1818480a.1547629303.git.jani.nikula@intel.com
-