The engine provides a mirror of the CSB in the HWSP. If we use the
cacheable reads from the HWSP, we can shave off a few mmio reads per
context-switch interrupt (which are quite frequent!). Just removing a
couple of mmio is not enough to actually reduce any latency, but a small
reduction in overall cpu usage.

Much appreciation for Ben dropping the bombshell that the CSB was in the
HWSP and for Michel in digging out the details.

v2: Don't be lazy, add the defines for the indices.
v3: Include the HWSP in debugfs/i915_engine_info
v4: Check for GVT-g, it currently depends on intercepting CSB mmio
v5: Fixup GVT-g mmio path
v6: Disable HWSP if VT-d is active as the iommu adds unpredictable
memory latency. (Mika)
v7: Also markup the CSB read with READ_ONCE() as it may still be an mmio
read and we want to stop the compiler from issuing a later (v.slow) reload.
Suggested-by: NBen Widawsky <benjamin.widawsky@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Acked-by: NMichel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170913133534.26927-1-chris@chris-wilson.co.ukReviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>

At the time of commit 1f767e02 ("drm/i915: HWS must be in the
mappable region for g33"), drm_mm insertion would often default to
placing a new object high in the zone forcing us to specify that certain
HWSP must be bound within the low mappable region. Since then, drm_mm
has gained more finesse over its placement and exposes that to the
caller, commit 4e64e553 ("drm: Improve drm_mm search (and fix
topdown allocation) with rbtrees"). As such where possible we want the
HWSP to be outside of the mappable aperture and so need to specify that
can be pinned high.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170913085605.18299-4-chris@chris-wilson.co.uk

On gen8+ we're currently using the PPHWSP of the kernel ctx as the
global HWSP. However, when the kernel ctx gets submitted (e.g. from
__intel_autoenable_gt_powersave) the HW will use that page as both
HWSP and PPHWSP. This causes a conflict in the register arena of the
HWSP, i.e. dword indices below 0x30. We don't current utilize this arena,
but in the following patches we will take advantage of the cached
register state for handling execlist's context status interrupt.

To avoid the conflict, instead of re-using the PPHWSP of the kernel
ctx we can allocate a separate page for the HWSP like what happens for
pre-execlists platform.

v2: Add a use-case for the register arena of the HWSP.
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1499357440-34688-1-git-send-email-daniele.ceraolospurio@intel.comSigned-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMichel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170913085605.18299-3-chris@chris-wilson.co.uk

Using the HWSP ggtt_offset to get the lrca offset is only correct if the
HWSP happens to be before it (when we reuse the PPHWSP of the kernel
context as the engine HWSP). Instead of making this assumption, get the
lrca offset from the kernel_context engine state.

And while looking at this part of the GuC interaction, it was also
noticed that the firmware expects the size of only the engine context
(context minus the execlist part, i.e. don't include the first 80
dwords), so pass the right size.

v2: Use the new macros to prevent abusive overuse of the old ones (Chris).
Reported-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NMichel Thierry <michel.thierry@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170712193032.27080-2-michel.thierry@intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Acked-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170913085605.18299-2-chris@chris-wilson.co.uk

Not only the context image consist of two parts (the PPHWSP, and the
logical context state), but we also allocate a header at the start of
for sharing data with GuC. Thus every lrc looks like this:

  | [guc]          | [hwsp] [logical state] |
  |<- our header ->|<- context image      ->|

So far, we have oversimplified whenever we use each of these parts of the
context, just because the GuC header happens to be in page 0, and the
(PP)HWSP is in page 1. But this had led to using the same define for more
than one meaning (as a page index in the lrc and as 1 page).

This patch adds defines for the GuC shared page, the PPHWSP page and the
start of the logical state. It also updated the places where the old
define was being used. Since we are not changing the size (or format) of
the context, there are no functional changes.

v2: Use PPHWSP index for hws again.
Suggested-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NMichel Thierry <michel.thierry@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: intel-gvt-dev@lists.freedesktop.org
Link: http://patchwork.freedesktop.org/patch/msgid/20170712193032.27080-1-michel.thierry@intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170913085605.18299-1-chris@chris-wilson.co.uk

As realised by commit 9e3d6223 ("math64, timers: Fix 32bit
mul_u64_u32_shr() and friends"), GCC does not always generate ideal code
for performing a 32b x 32b multiply returning a 64b result (i.e. where
we idiomatically use u64 result = (u64)x * (u32)x).
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170913105154.2910-2-chris@chris-wilson.co.ukReviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>

As realised by commit 9e3d6223 ("math64, timers: Fix 32bit
mul_u64_u32_shr() and friends"), GCC does not always generate ideal code
for performing a 32b x 32b multiply returning a 64b result (i.e. where
we idiomatically use u64 result = (u64)x * (u32)x). This catches a
couple of instances in the display code using (u64)x * (u32)y.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170913105154.2910-1-chris@chris-wilson.co.ukReviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>

The sgt iterators cause an

drivers/gpu/drm/i915/i915_gpu_error.c:846 i915_error_object_create() warn: statement has no effect 7

everywhere they are used. If we change the code slightly, we can achieve
the same increment without altering the output or raising a warning.

   text	   data	    bss	    dec	    hex	filename
1267906	  20587	   3168	1291661	 13b58d	before
1267906	  20587	   3168	1291661	 13b58d	after
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170913105754.4423-1-chris@chris-wilson.co.uk

Spare some comments and other small style changes.
Suggested-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: NOscar Mateo <oscar.mateo@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1505252197-27696-3-git-send-email-oscar.mateo@intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

We never used it in i915 and it's going to be removed
in newer GuC firmwares anyway.
Signed-off-by: NOscar Mateo <oscar.mateo@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1505252197-27696-2-git-send-email-oscar.mateo@intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

The default values for the default scheduling policy come from the
GuC firmware itself. Transform the magic numbers into defines.
Suggested-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: NOscar Mateo <oscar.mateo@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1505252197-27696-1-git-send-email-oscar.mateo@intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

The context descriptor is stored inside the per-engine context state, as
we only need to compute it once and access it frequently. However,
currently only intel_lrc.c has easy access, but i915_guc_submission.c
would like to frequently read it as well, and more so only ever needs
the lower 32bits. Make it an inline as the compiler should be able to
retrieve the value in less instructions than it takes to do the function
call:

add/remove: 0/1 grow/shrink: 1/0 up/down: 8/-45 (-37)
function                                     old     new   delta
i915_guc_submit                              621     629      +8
intel_lr_context_descriptor                   45       -     -45
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170912214905.21987-1-chris@chris-wilson.co.ukReviewed-by: NOscar Mateo <oscar.mateo@intel.com>

Error message indicating that the same MIPI command is sent
consecutively is perhaps too strongly said. Let's replace that as a
debug message instead.
Signed-off-by: NMika Kahola <mika.kahola@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1504252261-28964-3-git-send-email-mika.kahola@intel.com

Min brightness value from vbt was missing for CNP platform.
This setting have to refer backlight ic spec to restrict
min backlight output. Without this restriction, driver would
allow to configure lower brightness value and violate
backlight ic requirement.

Fixes: 4c9f7086 ("drm/i915/cnp: Backlight support for CNP.")
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: NShawn Lee <shawn.c.lee@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1505279961-16140-1-git-send-email-shawn.c.lee@intel.com

This reverts commit bbdf0b2f ("drm/i915/bxt: Disable device ready
before shutdown command").

Disable device ready before shutdown command was added previously to
avoid a split screen issue seen on dual link DSI panels. As of now, dual
link is not supported and will need some rework in the upstream
code. For single link DSI panels, the change is not required. This will
cause failure in sending SHUTDOWN packet during disable. Hence reverting
the change. Will handle the change as part of dual link enabling in
upstream.

Fixes: bbdf0b2f ("drm/i915/bxt: Disable device ready before shutdown command")
Cc: <stable@vger.kernel.org> # v4.12+
Signed-off-by: NUma Shankar <uma.shankar@intel.com>
Signed-off-by: NVidya Srinivas <vidya.srinivas@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1504604671-17237-1-git-send-email-vidya.srinivas@intel.com

Following the simplification to a single lookup loop in commit
170fa29b ("drm/i915: Simplify eb_lookup_vmas()") and commit
d1b48c1e ("drm/i915: Replace execbuf vma ht with an idr"), we can go
one step further and reorder the error paths so that the state of the
local variable obj is always known to the compiler and doesn't need the
uninitialized_var markup to squelch a compiler warning.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170912150752.20411-1-chris@chris-wilson.co.ukReviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>

The SDE interrupt bits 25, 26 and 27 are either reserved or meant for
DDI E hotplug in SPT+. These bits are meant for AUX channels only in LPT
and CPT, so add the appropriate checks.
Signed-off-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170909004255.14827-1-dhinakaran.pandiyan@intel.com

Give a name to the bit which tells pcode to control IPS.

v2: Note that IPS_CTL bits apply to DISPLAY_IPS_CONTROL as well (Chris)
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170912153411.20171-2-ville.syrjala@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170912153411.20171-1-ville.syrjala@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

Factor out setup_private_pat() for introducing the following patches.
Signed-off-by: NZhi Wang <zhi.a.wang@intel.com>
Cc: Ben Widawsky <benjamin.widawsky@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NBen Widawsky <benjamin.widawsky@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1505202148-22959-1-git-send-email-zhi.a.wang@intel.comSigned-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Min brightness value from vbt was missing for BXT platform.
This setting have to refer backlight ic spec to restrict
min backlight output. Without this restriction, driver would
allow to configure lower brightness value and violate
backlight ic requirement.

Fixes: 0fb890c0 ("drm/i915/bxt: BLC implementation")
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Cc: Gary C Wang <gary.c.wang@intel.com>
Signed-off-by: NShawn Lee <shawn.c.lee@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1505187390-7039-1-git-send-email-shawn.c.lee@intel.com

During IGT testing it has been shown that the specification
defined polling time of 1 us for FCLK_DONE, is sometimes not
enough. The issue is still reproducible while disabling
C-states through the PM QoS framework and also while disabling
preemtion. From this the most plausible explanation is that the
issue is due to a firmware flaw.
As a workaround, it is better to wait a little bit longer for
the FCLK_DONE to come around, than to leave with an DRM_ERROR
and having FCLK_DONE at a randome time after.
While spinning a list of igt tests prone to reproduce the issue
the FCLK_DONE poll failed at approximately 2% of the invocations
of the bdw_set_cdclk function. The longest poll time during this
testing was measured to ~7us. So, the suggested new poll time of
100us is on the safe side.

v2: Added more documentation about investigations done.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102243Signed-off-by: NMarta Lofstedt <marta.lofstedt@intel.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170908132829.6312-1-marta.lofstedt@intel.com

Continue on VLV PSR split with vfunc, let's also create one
for enabling source.

Also since we are touching *_enable_source functions let's
fix a comment with wrong name for vlv's one.

v2: Fix typo on commit message (DK).

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170907230041.22978-12-rodrigo.vivi@intel.com

Continue on VLV PSR split with vfunc, let's also create one
for enabling sink.

v2: Fix typo on commit message (DK).

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170907230041.22978-11-rodrigo.vivi@intel.com

Continue on VLV PSR split with vfunc, let's also create
one for setting up VSC.

v2: Rebased on top of commit d2419ffc ("drm/i915: Plumb
    crtc_state to PSR enable/disable")

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170907230041.22978-10-rodrigo.vivi@intel.com

Let's move the activation calls together after enable is done.

No real functional change should be expected here. Just an attempt
to get it clear when we are really activating PSR after enabling it.

v2: Add braces on if/else because commit message there is too long
    as suggested by Jani.
v3: Rebased on top of commit d2419ffc ("drm/i915: Plumb
    crtc_state to PSR enable/disable")

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170907230041.22978-9-rodrigo.vivi@intel.com

No functional change is expected here since at this point
PSR is not allowed to go to any active state. In other
words, not really enabled.

However let's do in a separated patch so it gets clear
on what is change and specially it can helps on bisect
case if we figure something has caused changes in behaviour.

But this needs to be done before we make the vfunc to
enable source to be in parity with VLV implementation.

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170907230041.22978-8-rodrigo.vivi@intel.com

This sequence is part of enable source anyways, but they
only need to be executed once and not on every activation,
So let's re-create hsw_enable_source.

v2: Avoid changing order here to avoid changing behaviour
    as suggested by Jani.
v3: Rebased on top of commit d2419ffc ("drm/i915: Plumb
    crtc_state to PSR enable/disable")

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170907230041.22978-7-rodrigo.vivi@intel.com

VSC package is decided per eDP spec for psr1 or psr2,
and not per platform, so let's unify it and kill "skl"
func.

v2: Rebased on top of commit d2419ffc ("drm/i915: Plumb
    crtc_state to PSR enable/disable")

Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170907230041.22978-6-rodrigo.vivi@intel.com

Continue on VLV PSR split with vfunc, let's move activate
function there.

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170907230041.22978-5-rodrigo.vivi@intel.com

On HSW+ the real activate of PSR is decided by the source
after certain amount of configured idle frames.

However for the driver perspective where we track psr.active
variable this function here is the actual activate one. So
let's rename it before moving to vfunc with that.

v2: Fix typo on commit message (DK).

Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170907230041.22978-4-rodrigo.vivi@intel.com

VLV/CHV has a total different PSR implementation than the
other platforms, so let's start moving that to vfuncs.
Let's start with disable_src one.

v2: Rebased on top of commit d2419ffc ("drm/i915: Plumb
    crtc_state to PSR enable/disable")

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170907230041.22978-3-rodrigo.vivi@intel.com

We really don't want to setup vfuncs and lock mutexes on
platforms that has no support to PSR.

Also we know what platforms they are so let's do it quietly.

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170907230041.22978-2-rodrigo.vivi@intel.com

We should go through the error handling path to decrease the
'framebuffer_references' as done everywhere else in this function.

Fixes: 2e2adb05 ("drm/i915: Add render decompression support")
Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170910085642.13673-1-christophe.jaillet@wanadoo.fr

If we know that we will completely fill a pagetable (i.e. we are
inserting a complete set of 512 pages), we can skip prefilling that PT
with scratch entries. If we have to abort the insertion prior to writing
the real entries, we will teardown the pagetable and remove it from the
page directory (so that we will restart the allocation next time).

We could do similar tricks for the PD and PDP, but the likelihood of a
single insertion covering the entire 512 entries diminishes, as do the
cycle savings. The saving are even greater (relatively) when we are
preallocating page tables for huge pages, as then we never need to fill
the page table.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170908181622.17791-1-chris@chris-wilson.co.ukReviewed-by: NMatthew Auld <matthew.auld@intel.com>

Macro params shall be wrapped into () to avoid unexpected results.
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170908161130.22424-1-michal.wajdeczko@intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Gen7 won't get any new engines, and we already added VCS2 there to just
silence gcc's not handled in switch warnings.

Use a default case instead, otherwise we will need to keep adding extra
cases if changes happen in the future.

v2: Since reaching the default case is impossible, use GEM_BUG_ON (Chris).

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NMichel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170830180115.907-1-michel.thierry@intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

gvt-next-2017-09-08

- PCI config sanitize series (Changbin)
- Workload submission error handling series (Fred)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170908063155.l54lvpivxntjm7hq@zhen-hp.sh.intel.com

IGD is PCIe device and has extended configuration space. Checking
the binary dump, we can see we have Caps located out of PCI compatible
Configuration Space range.

0x000: 86 80 12 19 17 04 10 00 06 00 00 03 00 00 00 00
0x010: 04 00 00 10 08 00 00 00 0c 00 00 00 08 00 00 00
0x020: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 b9 06
0x030: 00 f8 ff ff 40 00 00 00 00 00 00 00 0b 01 00 00
0x040: 09 70 0c 01 71 26 01 62 c8 00 04 84 00 00 00 00
0x050: c1 00 00 00 39 00 00 00 00 00 00 00 01 00 00 a2
0x060: 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
0x070: 10 ac 92 00 00 80 00 10 00 00 00 00 00 00 00 00
0x080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x090: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0a0: 00 00 00 00 00 00 00 00 00 00 00 00 05 d0 01 00
0x0b0: 18 00 e0 fe 00 00 00 00 00 00 00 00 00 00 00 00
0x0c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0d0: 01 00 22 00 00 80 00 00 00 00 00 00 00 00 00 00
0x0e0: 00 00 00 00 00 00 00 00 00 80 00 00 00 00 00 00
0x0f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x100: 1b 00 01 20 02 14 00 00 00 00 00 00 00 00 00 00
...

Currently, we only emulate the PCI compatible Configuration Space.
This is okay if we attach vGPU to PCI bus. But when we attach to
a PCI Express bus (when Qemu emulates a Intel Q35 chipset which has
PCIe slot), it will not work. Extended Configuration Space is required
for a PCIe device.

This patch extended the virtual configuration space from 256 bytes
to 4KB bytes. So we are to be a *real* PCIe device. And for the
Extended CapList we keep same to physical GPU.

Cc: Laszlo Ersek <lersek@redhat.com>
Tested-by: NLaszlo Ersek <lersek@redhat.com>
Signed-off-by: NChangbin Du <changbin.du@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

Looking at our virtual PCI device, we can see surprising Region 4 and Region 5.
00:10.0 VGA compatible controller: Intel Corporation Sky Lake Integrated Graphics (rev 06) (prog-if 00 [VGA controller])
        ....
        Region 0: Memory at 140000000 (64-bit, non-prefetchable) [size=16M]
        Region 2: Memory at 180000000 (64-bit, prefetchable) [size=1G]
        Region 4: Memory at <ignored> (32-bit, non-prefetchable)
        Region 5: Memory at <ignored> (32-bit, non-prefetchable)
        Expansion ROM at febd6000 [disabled] [size=2K]

The fact is that we only implemented BAR0 and BAR2. Surprising Region 4 and
Region 5 are shown because we report their size as 0xffffffff. They should
report size 0 instead.

BTW, the physical GPU has a PIO BAR. GVTg hasn't implemented PIO access, so
we ignored this BAR for vGPU device.

v2: fix BAR size value calculation.

Link: https://bugzilla.redhat.com/show_bug.cgi?id=1458032Signed-off-by: NChangbin Du <changbin.du@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>