When IORING_SETUP_SQPOLL is enabled, io_ring_ctx_wait_and_kill() will wait
for sq thread to idle by busy loop:

    while (ctx->sqo_thread && !wq_has_sleeper(&ctx->sqo_wait))
        cond_resched();

Above loop isn't very CPU friendly, it may introduce a short cpu burst on
the current cpu.

If ctx->refs is dying, we forbid sq_thread from submitting any further
SQEs. Instead they just get discarded when we exit.
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

If the request is still hashed in io_async_task_func(), then it cannot
have been canceled and it's pointless to check. So save that check.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Add IORING_OP_TEE implementing tee(2) support. Almost identical to
splice bits, but without offsets.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

req->flags stores all sqe->flags. After checking that sqe->flags are
valid set if IOSQE* flags, no need to double check it, just forward them
all.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

io_file_put() deals with flushing state's file refs, adding "state" to
its name makes it a bit clearer. Also, avoid double check of
state->file in __io_file_get() in some cases.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

A submission is "async" IIF it's done by SQPOLL thread. Instead of
passing @async flag into io_submit_sqes(), deduce it from ctx->flags.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

We only need apoll in the one section, do the juggling with the work
restoration there. This removes a special case further down as well.

No functional changes in this patch.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

There's no point in using list_del_init() on entries that are going
away, and the associated lock is always used in process context so
let's not use the IRQ disabling+saving variant of the spinlock.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This new flag should be set/clear from the application to
disable/enable eventfd notifications when a request is completed
and queued to the CQ ring.

Before this patch, notifications were always sent if an eventfd is
registered, so IORING_CQ_EVENTFD_DISABLED is not set during the
initialization.

It will be up to the application to set the flag after initialization
if no notifications are required at the beginning.
Signed-off-by: NStefano Garzarella <sgarzare@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This patch adds the new 'cq_flags' field that should be written by
the application and read by the kernel.

This new field is available to the userspace application through
'cq_off.flags'.
We are using 4-bytes previously reserved and set to zero. This means
that if the application finds this field to zero, then the new
functionality is not supported.

In the next patch we will introduce the first flag available.
Signed-off-by: NStefano Garzarella <sgarzare@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Some file descriptors use separate waitqueues for their f_ops->poll()
handler, most commonly one for read and one for write. The io_uring
poll implementation doesn't work with that, as the 2nd poll_wait()
call will cause the io_uring poll request to -EINVAL.

This affects (at least) tty devices and /dev/random as well. This is a
big problem for event loops where some file descriptors work, and others
don't.

With this fix, io_uring handles multiple waitqueues.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

We currently embed and queue a work item per fixed_file_ref_node that
we update, but if the workload does a lot of these, then the associated
kworker-events overhead can become quite noticeable.

Since we rarely need to wait on these, batch them at 1 second intervals
instead. If we do need to wait for them, we just flush the pending
delayed work.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

We used to have three completions, now we just have two. With the two,
let's not allocate them dynamically, just embed then in the ctx and
name them appropriately.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Remove duplicate semicolon at the end of line in io_file_from_index()
Signed-off-by: NXiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The "struct io_submit_state *state" parameter is not used, remove it.
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The attempt protecting us from closing the ring itself wasn't really
complete, and we actually don't need it. The referencing of requests
themselve, and the references they hold on the ring, ensures that the
life time of the ring is sane. With the check removed, we can also
remove the need to have the close operation fget() the file.
Reported-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

We currently make some guesses as when to open this fd, but in reality
we have no business (or need) to do so at all. In fact, it makes certain
things fail, like O_PATH.

Remove the fd lookup from these opcodes, we're just passing the 'fd' to
generic helpers anyway. With that, we can also remove the special casing
of fd values in io_req_needs_file(), and the 'fd_non_neg' check that
we have. And we can ensure that we only read sqe->fd once.

This fixes O_PATH usage with openat/openat2, and ditto statx path side
oddities.

Cc: stable@vger.kernel.org: # v5.6
Reported-by: NMax Kellermann <mk@cm4all.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

If copy_to_user() in io_uring_setup() failed, we'll leak many kernel
resources, which will be recycled until process terminates. This bug
can be reproduced by using mprotect to set params to PROT_READ. To fix
this issue, refactor io_uring_create() a bit to add a new 'struct
io_uring_params __user *params' parameter and move the copy_to_user()
in io_uring_setup() to io_uring_setup(), if copy_to_user() failed,
we can free kernel resource properly.
Suggested-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The prepare_to_wait() and finish_wait() calls in io_uring_cancel_files()
are mismatched. Currently I don't see any issues related this bug, just
find it by learning codes.
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Nonblocking do_splice() still may wait for some time on an inode mutex.
Let's play safe and always punt it async.
Reported-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

io_req_defer() do double-checked locking. Use proper helpers for that,
i.e. list_empty_careful().
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

[   40.179474] refcount_t: underflow; use-after-free.
[   40.179499] WARNING: CPU: 6 PID: 1848 at lib/refcount.c:28 refcount_warn_saturate+0xae/0xf0
...
[   40.179612] RIP: 0010:refcount_warn_saturate+0xae/0xf0
[   40.179617] Code: 28 44 0a 01 01 e8 d7 01 c2 ff 0f 0b 5d c3 80 3d 15 44 0a 01 00 75 91 48 c7 c7 b8 f5 75 be c6 05 05 44 0a 01 01 e8 b7 01 c2 ff <0f> 0b 5d c3 80 3d f3 43 0a 01 00 0f 85 6d ff ff ff 48 c7 c7 10 f6
[   40.179619] RSP: 0018:ffffb252423ebe18 EFLAGS: 00010286
[   40.179623] RAX: 0000000000000000 RBX: ffff98d65e929400 RCX: 0000000000000000
[   40.179625] RDX: 0000000000000001 RSI: 0000000000000086 RDI: 00000000ffffffff
[   40.179627] RBP: ffffb252423ebe18 R08: 0000000000000001 R09: 000000000000055d
[   40.179629] R10: 0000000000000c8c R11: 0000000000000001 R12: 0000000000000000
[   40.179631] R13: ffff98d68c434400 R14: ffff98d6a9cbaa20 R15: ffff98d6a609ccb8
[   40.179634] FS:  0000000000000000(0000) GS:ffff98d6af580000(0000) knlGS:0000000000000000
[   40.179636] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   40.179638] CR2: 00000000033e3194 CR3: 000000006480a003 CR4: 00000000003606e0
[   40.179641] Call Trace:
[   40.179652]  io_put_req+0x36/0x40
[   40.179657]  io_free_work+0x15/0x20
[   40.179661]  io_worker_handle_work+0x2f5/0x480
[   40.179667]  io_wqe_worker+0x2a9/0x360
[   40.179674]  ? _raw_spin_unlock_irqrestore+0x24/0x40
[   40.179681]  kthread+0x12c/0x170
[   40.179685]  ? io_worker_handle_work+0x480/0x480
[   40.179690]  ? kthread_park+0x90/0x90
[   40.179695]  ret_from_fork+0x35/0x40
[   40.179702] ---[ end trace 85027405f00110aa ]---

Opcode handler must never put submission ref, but that's what
io_sync_file_range_finish() do. use io_steal_work() there.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

While working on to make io_uring sqpoll mode support syscalls that need
struct files_struct, I got cpu soft lockup in io_ring_ctx_wait_and_kill(),

    while (ctx->sqo_thread && !wq_has_sleeper(&ctx->sqo_wait))
        cpu_relax();

above loop never has an chance to exit, it's because preempt isn't enabled
in the kernel, and the context calling io_ring_ctx_wait_and_kill() and
io_sq_thread() run in the same cpu, if io_sq_thread calls a cond_resched()
yield cpu and another context enters above loop, then io_sq_thread() will
always in runqueue and never exit.

Use cond_resched() can fix this issue.

 Reported-by: syzbot+66243bb7126c410cefe6@syzkaller.appspotmail.com
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Use ctx->fallback_req address for test_and_set_bit_lock() and
clear_bit_unlock().
Signed-off-by: NBijan Mottahedeh <bijan.mottahedeh@oracle.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

We do blocking retry from our poll handler, if the file supports polled
notifications. Only mark the request as needing an async worker if we
can't poll for it.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

We can have files like eventfd where it's perfectly fine to do poll
based retry on them, right now io_file_supports_async() doesn't take
that into account.

Pass in data direction and check the f_op instead of just always needing
an async worker.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Clay reports that OP_STATX fails for a test case with a valid fd
and empty path:

 -- Test 0: statx:fd 3: SUCCEED, file mode 100755
 -- Test 1: statx:path ./uring_statx: SUCCEED, file mode 100755
 -- Test 2: io_uring_statx:fd 3: FAIL, errno 9: Bad file descriptor
 -- Test 3: io_uring_statx:path ./uring_statx: SUCCEED, file mode 100755

This is due to statx not grabbing the process file table, hence we can't
lookup the fd in async context. If the fd is valid, ensure that we grab
the file table so we can grab the file from async context.

Cc: stable@vger.kernel.org # v5.6
Reported-by: NClay Harris <bugs@claycon.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

When testing io_uring IORING_FEAT_FAST_POLL feature, I got below panic:
BUG: kernel NULL pointer dereference, address: 0000000000000030
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 5 PID: 2154 Comm: io_uring_echo_s Not tainted 5.6.0+ #359
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS rel-1.11.1-0-g0551a4be2c-prebuilt.qemu-project.org 04/01/2014
RIP: 0010:io_wq_submit_work+0xf/0xa0
Code: ff ff ff be 02 00 00 00 e8 ae c9 19 00 e9 58 ff ff ff 66 0f 1f
84 00 00 00 00 00 0f 1f 44 00 00 41 54 49 89 fc 55 53 48 8b 2f <8b>
45 30 48 8d 9d 48 ff ff ff 25 01 01 00 00 83 f8 01 75 07 eb 2a
RSP: 0018:ffffbef543e93d58 EFLAGS: 00010286
RAX: ffffffff84364f50 RBX: ffffa3eb50f046b8 RCX: 0000000000000000
RDX: ffffa3eb0efc1840 RSI: 0000000000000006 RDI: ffffa3eb50f046b8
RBP: 0000000000000000 R08: 00000000fffd070d R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffffa3eb50f046b8
R13: ffffa3eb0efc2088 R14: ffffffff85b69be0 R15: ffffa3eb0effa4b8
FS:  00007fe9f69cc4c0(0000) GS:ffffa3eb5ef40000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000030 CR3: 0000000020410000 CR4: 00000000000006e0
Call Trace:
 task_work_run+0x6d/0xa0
 do_exit+0x39a/0xb80
 ? get_signal+0xfe/0xbc0
 do_group_exit+0x47/0xb0
 get_signal+0x14b/0xbc0
 ? __x64_sys_io_uring_enter+0x1b7/0x450
 do_signal+0x2c/0x260
 ? __x64_sys_io_uring_enter+0x228/0x450
 exit_to_usermode_loop+0x87/0xf0
 do_syscall_64+0x209/0x230
 entry_SYSCALL_64_after_hwframe+0x49/0xb3
RIP: 0033:0x7fe9f64f8df9
Code: Bad RIP value.

task_work_run calls io_wq_submit_work unexpectedly, it's obvious that
struct callback_head's func member has been changed. After looking into
codes, I found this issue is still due to the union definition:
    union {
        /*
         * Only commands that never go async can use the below fields,
         * obviously. Right now only IORING_OP_POLL_ADD uses them, and
         * async armed poll handlers for regular commands. The latter
         * restore the work, if needed.
         */
        struct {
            struct callback_head	task_work;
            struct hlist_node	hash_node;
            struct async_poll	*apoll;
        };
        struct io_wq_work	work;
    };

When task_work_run has multiple work to execute, the work that calls
io_poll_remove_all() will do req->work restore for  non-poll request
always, but indeed if a non-poll request has been added to a new
callback_head, subsequent callback will call io_async_task_func() to
handle this request, that means we should not do the restore work
for such non-poll request. Meanwhile in io_async_task_func(), we should
drop submit ref when req has been canceled.

Fix both issues.

Fixes: b1f573bd ("io_uring: restore req->work when canceling poll request")
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

Use io_double_put_req()
Signed-off-by: NJens Axboe <axboe@kernel.dk>

When checking for draining with __req_need_defer(), it tries to match
how many requests were sent before a current one with number of already
completed. Dropped SQEs are included in req->sequence, and they won't
ever appear in CQ. To compensate for that, __req_need_defer() substracts
ctx->cached_sq_dropped.
However, what it should really use is number of SQEs dropped __before__
the current one. In other words, any submitted request shouldn't
shouldn't affect dequeueing from the drain queue of previously submitted
ones.

Instead of saving proper ctx->cached_sq_dropped in each request,
substract from req->sequence it at initialisation, so it includes number
of properly submitted requests.

note: it also changes behaviour of timeouts, but
1. it's already diverge from the description because of using SQ
2. the description is ambiguous regarding dropped SQEs
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

req->timeout.count and req->io->timeout.seq_offset store the same value,
which is sqe->off. Kill the second one
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

io_timeout() can be executed asynchronously by a worker and without
holding ctx->uring_lock

1. using ctx->cached_sq_head there is racy there
2. it should count events from a moment of timeout's submission, but
not execution

Use req->sequence.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

syzbot reports this crash:

BUG: unable to handle page fault for address: ffffffffffffffe8
PGD f96e17067 P4D f96e17067 PUD f96e19067 PMD 0
Oops: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
CPU: 55 PID: 211750 Comm: trinity-c127 Tainted: G    B        L    5.7.0-rc1-next-20200413 #4
Hardware name: HP ProLiant DL380 Gen9/ProLiant DL380 Gen9, BIOS P89 04/12/2017
RIP: 0010:__wake_up_common+0x98/0x290
el/sched/wait.c:87
Code: 40 4d 8d 78 e8 49 8d 7f 18 49 39 fd 0f 84 80 00 00 00 e8 6b bd 2b 00 49 8b 5f 18 45 31 e4 48 83 eb 18 4c 89 ff e8 08 bc 2b 00 <45> 8b 37 41 f6 c6 04 75 71 49 8d 7f 10 e8 46 bd 2b 00 49 8b 47 10
RSP: 0018:ffffc9000adbfaf0 EFLAGS: 00010046
RAX: 0000000000000000 RBX: ffffffffffffffe8 RCX: ffffffffaa9636b8
RDX: 0000000000000003 RSI: dffffc0000000000 RDI: ffffffffffffffe8
RBP: ffffc9000adbfb40 R08: fffffbfff582c5fd R09: fffffbfff582c5fd
R10: ffffffffac162fe3 R11: fffffbfff582c5fc R12: 0000000000000000
R13: ffff888ef82b0960 R14: ffffc9000adbfb80 R15: ffffffffffffffe8
FS:  00007fdcba4c4740(0000) GS:ffff889033780000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffffffffe8 CR3: 0000000f776a0004 CR4: 00000000001606e0
Call Trace:
 __wake_up_common_lock+0xea/0x150
ommon_lock at kernel/sched/wait.c:124
 ? __wake_up_common+0x290/0x290
 ? lockdep_hardirqs_on+0x16/0x2c0
 __wake_up+0x13/0x20
 io_cqring_ev_posted+0x75/0xe0
v_posted at fs/io_uring.c:1160
 io_ring_ctx_wait_and_kill+0x1c0/0x2f0
l at fs/io_uring.c:7305
 io_uring_create+0xa8d/0x13b0
 ? io_req_defer_prep+0x990/0x990
 ? __kasan_check_write+0x14/0x20
 io_uring_setup+0xb8/0x130
 ? io_uring_create+0x13b0/0x13b0
 ? check_flags.part.28+0x220/0x220
 ? lockdep_hardirqs_on+0x16/0x2c0
 __x64_sys_io_uring_setup+0x31/0x40
 do_syscall_64+0xcc/0xaf0
 ? syscall_return_slowpath+0x580/0x580
 ? lockdep_hardirqs_off+0x1f/0x140
 ? entry_SYSCALL_64_after_hwframe+0x3e/0xb3
 ? trace_hardirqs_off_caller+0x3a/0x150
 ? trace_hardirqs_off_thunk+0x1a/0x1c
 entry_SYSCALL_64_after_hwframe+0x49/0xb3
RIP: 0033:0x7fdcb9dd76ed
Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 6b 57 2c 00 f7 d8 64 89 01 48
RSP: 002b:00007ffe7fd4e4f8 EFLAGS: 00000246 ORIG_RAX: 00000000000001a9
RAX: ffffffffffffffda RBX: 00000000000001a9 RCX: 00007fdcb9dd76ed
RDX: fffffffffffffffc RSI: 0000000000000000 RDI: 0000000000005d54
RBP: 00000000000001a9 R08: 0000000e31d3caa7 R09: 0082400004004000
R10: ffffffffffffffff R11: 0000000000000246 R12: 0000000000000002
R13: 00007fdcb842e058 R14: 00007fdcba4c46c0 R15: 00007fdcb842e000
Modules linked in: bridge stp llc nfnetlink cn brd vfat fat ext4 crc16 mbcache jbd2 loop kvm_intel kvm irqbypass intel_cstate intel_uncore dax_pmem intel_rapl_perf dax_pmem_core ip_tables x_tables xfs sd_mod tg3 firmware_class libphy hpsa scsi_transport_sas dm_mirror dm_region_hash dm_log dm_mod [last unloaded: binfmt_misc]
CR2: ffffffffffffffe8
---[ end trace f9502383d57e0e22 ]---
RIP: 0010:__wake_up_common+0x98/0x290
Code: 40 4d 8d 78 e8 49 8d 7f 18 49 39 fd 0f 84 80 00 00 00 e8 6b bd 2b 00 49 8b 5f 18 45 31 e4 48 83 eb 18 4c 89 ff e8 08 bc 2b 00 <45> 8b 37 41 f6 c6 04 75 71 49 8d 7f 10 e8 46 bd 2b 00 49 8b 47 10
RSP: 0018:ffffc9000adbfaf0 EFLAGS: 00010046
RAX: 0000000000000000 RBX: ffffffffffffffe8 RCX: ffffffffaa9636b8
RDX: 0000000000000003 RSI: dffffc0000000000 RDI: ffffffffffffffe8
RBP: ffffc9000adbfb40 R08: fffffbfff582c5fd R09: fffffbfff582c5fd
R10: ffffffffac162fe3 R11: fffffbfff582c5fc R12: 0000000000000000
R13: ffff888ef82b0960 R14: ffffc9000adbfb80 R15: ffffffffffffffe8
FS:  00007fdcba4c4740(0000) GS:ffff889033780000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffffffffe8 CR3: 0000000f776a0004 CR4: 00000000001606e0
Kernel panic - not syncing: Fatal exception
Kernel Offset: 0x29800000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
---[ end Kernel panic - not syncing: Fatal exception ]—

which is due to error injection (or allocation failure) preventing the
rings from being setup. On shutdown, we attempt to remove any pending
requests, and for poll request, we call io_cqring_ev_posted() when we've
killed poll requests. However, since the rings aren't setup, we won't
find any poll requests. Make the calling of io_cqring_ev_posted()
dependent on actually having completed requests. This fixes this setup
corner case, and removes spurious calls if we remove poll requests and
don't find any.
Reported-by: NQian Cai <cai@lca.pw>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

If the request has been marked as canceled, don't try and issue it.
Instead just fill a canceled event and finish the request.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

We added this for just the regular poll requests in commit a6ba632d
("io_uring: retry poll if we got woken with non-matching mask"), we
should do the same for the poll handler used pollable async requests.
Move the re-wait check and arm into a helper, and call it from
io_async_task_func() as well.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The splice file punt check uses file->f_mode to check for O_NONBLOCK,
but it should be checking file->f_flags. This leads to punting even
for files that have O_NONBLOCK set, which isn't necessary. This equates
to checking for FMODE_PATH, which will never be set on the fd in
question.

Fixes: 7d67af2c ("io_uring: add splice(2) support")
Signed-off-by: NJens Axboe <axboe@kernel.dk>

When running liburing test case 'accept', I got below warning:
RED: Invalid credentials
RED: At include/linux/cred.h:285
RED: Specified credentials: 00000000d02474a0
RED: ->magic=4b, put_addr=000000005b4f46e9
RED: ->usage=-1699227648, subscr=-25693
RED: ->*uid = { 256,-25693,-25693,65534 }
RED: ->*gid = { 0,-1925859360,-1789740800,-1827028688 }
RED: ->security is 00000000258c136e
eneral protection fault, probably for non-canonical address 0xdead4ead00000000: 0000 [#1] SMP PTI
PU: 21 PID: 2037 Comm: accept Not tainted 5.6.0+ #318
ardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS rel-1.11.1-0-g0551a4be2c-prebuilt.qemu-project.org 04/01/2014
IP: 0010:dump_invalid_creds+0x16f/0x184
ode: 48 8b 83 88 00 00 00 48 3d ff 0f 00 00 76 29 48 89 c2 81 e2 00 ff ff ff 48
81 fa 00 6b 6b 6b 74 17 5b 48 c7 c7 4b b1 10 8e 5d <8b> 50 04 41 5c 8b 30 41 5d
e9 67 e3 04 00 5b 5d 41 5c 41 5d c3 0f
SP: 0018:ffffacc1039dfb38 EFLAGS: 00010087
AX: dead4ead00000000 RBX: ffff9ba39319c100 RCX: 0000000000000007
DX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff8e10b14b
BP: ffffffff8e108476 R08: 0000000000000000 R09: 0000000000000001
10: 0000000000000000 R11: ffffacc1039df9e5 R12: 000000009552b900
13: 000000009319c130 R14: ffff9ba39319c100 R15: 0000000000000246
S:  00007f96b2bfc4c0(0000) GS:ffff9ba39f340000(0000) knlGS:0000000000000000
S:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
R2: 0000000000401870 CR3: 00000007db7a4000 CR4: 00000000000006e0
all Trace:
__invalid_creds+0x48/0x4a
__io_req_aux_free+0x2e8/0x3b0
? io_poll_remove_one+0x2a/0x1d0
__io_free_req+0x18/0x200
io_free_req+0x31/0x350
io_poll_remove_one+0x17f/0x1d0
io_poll_cancel.isra.80+0x6c/0x80
io_async_find_and_cancel+0x111/0x120
io_issue_sqe+0x181/0x10e0
? __lock_acquire+0x552/0xae0
? lock_acquire+0x8e/0x310
? fs_reclaim_acquire.part.97+0x5/0x30
__io_queue_sqe.part.100+0xc4/0x580
? io_submit_sqes+0x751/0xbd0
? rcu_read_lock_sched_held+0x32/0x40
io_submit_sqes+0x9ba/0xbd0
? __x64_sys_io_uring_enter+0x2b2/0x460
? __x64_sys_io_uring_enter+0xaf/0x460
? find_held_lock+0x2d/0x90
? __x64_sys_io_uring_enter+0x111/0x460
__x64_sys_io_uring_enter+0x2d7/0x460
do_syscall_64+0x5a/0x230
entry_SYSCALL_64_after_hwframe+0x49/0xb3

After looking into codes, it turns out that this issue is because we didn't
restore the req->work, which is changed in io_arm_poll_handler(), req->work
is a union with below struct:
	struct {
		struct callback_head	task_work;
		struct hlist_node	hash_node;
		struct async_poll	*apoll;
	};
If we forget to restore, members in struct io_wq_work would be invalid,
restore the req->work to fix this issue.
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

Get rid of not needed 'need_restore' variable.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Requests initialisation is scattered across several functions, namely
io_init_req(), io_submit_sqes(), io_submit_sqe(). Put it
in io_init_req() for better data locality and code clarity.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

It's a good idea to not read sqe->flags twice, as it's prone to security
bugs. Instead of passing it around, embeed them in req->flags. It's
already so except for IOSQE_IO_LINK.
1. rename former REQ_F_LINK -> REQ_F_LINK_HEAD
2. introduce and copy REQ_F_LINK, which mimics IO_IOSQE_LINK

And leave req_set_fail_links() using new REQ_F_LINK, because it's more
sensible.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Having only one place for cleaning up a request after a link assembly/
submission failure will play handy in the future. At least it allows
to remove duplicated cleanup sequence.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

As a preparation for extracting request init bits, remove self-coded mm
tracking from io_submit_sqes(), but rely on current->mm. It's more
convenient, than passing this piece of state in other functions.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>