- 02 8月, 2013 10 次提交
-
-
由 Chris Metcalf 提交于
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Chris Metcalf 提交于
The code used to call napi_disable() in an interrupt handler (from smp_call_function), which in turn could call msleep(). Unfortunately you can't sleep in an interrupt context. Luckily it turns out all the NAPI support functions are just operating on data structures and not on any deeply per-cpu data, so we can arrange to set up and tear down all the NAPI state on the core driving the process, and just do the IRQ enable/disable as a smp_call_function thing. Signed-off-by: NChris Metcalf <cmetcalf@tilera.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Chris Metcalf 提交于
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Chris Metcalf 提交于
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Chris Metcalf 提交于
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Chris Metcalf 提交于
Building against headers from an older Tilera hypervisor can cause the frags[] array to be overrun. Don't enable TSO in that case. Signed-off-by: NChris Metcalf <cmetcalf@tilera.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Chris Metcalf 提交于
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Chris Metcalf 提交于
This change allows the user to configure various features of the tile networking drivers on and off. There is no change to the default initialization state of either the tilegx or tilepro drivers. Neither driver needs the ndo_fix_features or ndo_set_features callbacks, since the generic code already handles the dependencies for fix_features, and there is no hardware state to tweak in set_features. Signed-off-by: NChris Metcalf <cmetcalf@tilera.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Claudiu Manoil 提交于
grp->grp_id is obsolete. It has no use in the current driver. Remove it from gfar_priv_grp and put the 'rstat' member in its place, in the 2nd cache line, as rstat needs fast access. Signed-off-by: NClaudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
David suggested to add a BUG_ON() to catch if some layer sets skb->sk pointer without a corresponding destructor. As skb can sit in a queue, it's mandatory to make sure the socket cannot disappear, and it's usually done by taking a reference on the socket, then releasing it from the skb destructor. This patch is a follow-up to commit c34a7612 ("net: skb_orphan() changes") and will be reverted after catching all possible offenders if any. Suggested-by: NDavid Miller <davem@davemloft.net> Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 8月, 2013 18 次提交
-
-
由 Hannes Frederic Sowa 提交于
With the addition of the suppress operation (7764a45a ("fib_rules: add .suppress operation") we rely on accurate error reporting of the fib_rules.actions. fib6_rule_action always returned -EAGAIN in case we could not find a matching route and 0 if a rule was matched. This also included a match for blackhole or prohibited rule actions which could get suppressed by the new logic. So adapt fib6_rule_action to always return the correct error code as its counterpart fib4_rule_action does. This also fixes a possiblity of nullptr-deref where we don't find a table, thus rt == NULL. Because the condition rt != ip6_null_entry still holdes it seems we could later get a nullptr bug on dereference rt->dst. v2: a) Fixed a brain fart in the commit msg (the rule => a table, etc). No changes to the patch. Cc: Stefan Tomanek <stefan.tomanek@wertarbyte.de> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Reflow modified prototypes to 80 columns. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Reflow modified prototypes to 80 columns. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Reflow modified prototypes to 80 columns. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Reflow modified prototypes to 80 columns. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Reflow modified prototypes to 80 columns. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Reflow modified prototypes to 80 columns. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paul Gortmaker 提交于
A collection of expectations and operational details about how networking development takes place in the context of the netdev mailing list. The content is meant to capture specific items that are unique to netdev workflow, and not re-document generic linux expectations that are already captured elsewhere. This was originally proposed[1] as a regular posting mailing list FAQ, but it probably is more universally accessible here in tree. [1] https://lwn.net/Articles/559211/Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stefan Tomanek 提交于
This change adds a new operation to the fib_rules_ops struct; it allows the suppression of routing decisions if certain criteria are not met by its results. The first implemented constraint is a minimum prefix length added to the structures of routing rules. If a rule is added with a minimum prefix length >0, only routes meeting this threshold will be considered. Any other (more general) routing table entries will be ignored. When configuring a system with multiple network uplinks and default routes, it is often convinient to reference the main routing table multiple times - but omitting the default route. Using this patch and a modified "ip" utility, this can be achieved by using the following command sequence: $ ip route add table secuplink default via 10.42.23.1 $ ip rule add pref 100 table main prefixlength 1 $ ip rule add pref 150 fwmark 0xA table secuplink With this setup, packets marked 0xA will be processed by the additional routing table "secuplink", but only if no suitable route in the main routing table can be found. By using a minimal prefixlength of 1, the default route (/0) of the table "main" is hidden to packets processed by rule 100; packets traveling to destinations with more specific routing entries are processed as usual. Signed-off-by: NStefan Tomanek <stefan.tomanek@wertarbyte.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Reflow modified prototypes to 80 columns. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
It is illegal to set skb->sk without corresponding destructor. Its therefore safe for skb_orphan() to not clear skb->sk if skb->destructor is not set. Also avoid clearing skb->destructor if already NULL. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Commit 547669d4 ("tcp: xps: fix reordering issues") added unexpected reorders in case netem is used in a MQ setup for high performance test bed. ETH=eth0 tc qd del dev $ETH root 2>/dev/null tc qd add dev $ETH root handle 1: mq for i in `seq 1 32` do tc qd add dev $ETH parent 1:$i netem delay 100ms done As all tcp packets are orphaned by netem, TCP stack believes it can set skb->ooo_okay on all packets. In order to allow producers to send more packets, we want to keep sk_wmem_alloc from reaching sk_sndbuf limit. We can do that by accounting one byte per skb in netem queues, so that TCP stack is not fooled too much. Tested: With above MQ/netem setup, scaling number of concurrent flows gives linear results and no reorders/retransmits lpq83:~# for n in 1 10 20 30 40 50 60 70 80 90 100 do echo -n "n:$n " ; ./super_netperf $n -H 10.7.7.84; done n:1 198.46 n:10 2002.69 n:20 4000.98 n:30 6006.35 n:40 8020.93 n:50 10032.3 n:60 12081.9 n:70 13971.3 n:80 16009.7 n:90 17117.3 n:100 17425.5 Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 fan.du 提交于
Current net name space has only one genid for both IPv4 and IPv6, it has below drawbacks: - Add/delete an IPv4 address will invalidate all IPv6 routing table entries. - Insert/remove XFRM policy will also invalidate both IPv4/IPv6 routing table entries even when the policy is only applied for one address family. Thus, this patch attempt to split one genid for two to cater for IPv4 and IPv6 separately in a fine granularity. Signed-off-by: NFan Du <fan.du@windriver.com> Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Laurent Pinchart 提交于
The RFE interrupt is enabled for the r8a7790 but isn't handled, resulting in the interrupts core noticing unhandled interrupts, and eventually disabling the ethernet IRQ. Fix it by adding RFE to the bitmask of error interrupts to be handled for r8a7790. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next由 David S. Miller 提交于
Jeff Kirsher says: ==================== This series contains updates to ixgbe and pci. The first patch for ixgbe from Greg Rose is the second submission. The first submission of "ixgbe: Retain VLAN filtering in promiscuous + VT mode" had a typo, which Joe Perches pointed out and is fixed in this submission. Alex updates the ixgbe driver to use the generic helper pci_vfs_assigned instead of the driver specific function ixgbe_vfs_are_assigned. Don Skidmore provides 4 patches for ixgbe, the first being a fix for flow control ethtool reporting. Originally ixgbe_device_supports_autoneg_fc() was expected to be called by only copper devices, which lead to false information being displayed via ethtool. Two other patches add support for fixed fiber for SFP+ devices and the addition of a quad-port x520 adapter. The last patch simply bumps the driver version. Emil Tantilov provides 3 fixes for ixgbe, two of which resolve semaphore lock issues. The third fix resolves several issues in the previous implementation of the SFF data dumps of SFP+ modules. The remaining ixgbe and pci patches are from Jacob Keller. The pci patches exposes bus speed, link speed and bus width so that drivers can take advantage of this information. In addition, adds a pci function which obtains minimum link width and speed. Jacob also provides the ixgbe patch to incorporate the pci function. He provides a patch that fixes a lockdep issue created due to ixgbe_ptp_stop always running cancel_work_sync even if the work item had not been created properly with INIT_WORK. This issue was found and reported by Stephen Hemminger. -v2- * fix patch 3 to be a bool function based on David Miller's feedback * fix patch 4 debug message based on David Miller's feedback * fix patch 8 moved the extern declarations to pci.h based on Bjorn Helgaas's feedback * fix patch 11 update the error message to include encoding loss based * fix patch 8/9/10 title based on Bjorn's feedback ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dmitry Popov 提交于
Remove declaration, 4 defines and confusing comment that are no longer used since 1a2c6181 ("tcp: Remove TCPCT"). Signed-off-by: NDmitry Popov <dp@highloadlab.com> Acked-by: NChristoph Paasch <christoph.paasch@uclouvain.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 31 7月, 2013 12 次提交
-
-
由 Don Skidmore 提交于
This is a x520 based quad-port (4x10Gbps) NIC with a single QSFP+ connector. Changes were required to our identify functions due to different eeprom address which is also included here. Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Emil Tantilov 提交于
This patch changes the error code path in ixgbe_acquire_swfw_sync() to deal with cases where acquiring SW semaphore times out. In cases where the SW/FW semaphore bits were set (i.e. due to a crash) the driver will hang on load. With this patch the driver will clear the stuck bits if the semaphore was not acquired in the allotted time. Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jacob Keller 提交于
This patch renames the stats introduced by the busy poll feature so that they are more inline with the current statistics naming schemes. Signed-off-by: NJacob Keller <jacob.e.keller@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jacob Keller 提交于
This patch fixes a lockdep issue created due to ixgbe_ptp_stop always running cancel_work_sync even if the work item had not been created properly with INIT_WORK. This is caused because ixgbe_ptp_stop did not check to actually ensure PTP was running first. The new implementation introduces a state in the &adapter->state field which is used to indicate that PTP is running. (This replaces the IXGBE_FLAG2_PTP_ENABLED field). This state will use the atomic set_bit, test_bit, and test_and_clear_bit functions. ixgbe_ptp_stop will check to ensure that PTP was enabled, (and if not, it will not attempt to do any cleanup work from ixgbe_ptp_init). This resolves the lockdep annotation warning found by Stephen Hemminger Reported-by: NStephen Hemminger <stephen@networkplumber.org> Signed-off-by: NJacob Keller <jacob.e.keller@intel.com> Acked-by: NDon Skidmore <donald.c.skidmore@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jacob Keller 提交于
This patch uses the new pcie_get_minimum_link function to perform a check to ensure that the adapter is hooked into a slot which is capable of providing the necessary bandwidth. This check supersedes the original method which only checked the current pci device. The new method is capable of determining the minimum speed and link of an entire PCI chain. -v2- * update the error message to include encoding loss CC: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: NJacob Keller <jacob.e.keller@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jacob Keller 提交于
A PCI Express device can potentially report a link width and speed which it will not properly fulfill due to being plugged into a slower link higher in the chain. This function walks up the PCI bus chain and calculates the minimum link width and speed of this entire chain. This can be useful to enable a device to determine if it has enough bandwidth for optimum functionality. Signed-off-by: NJacob Keller <jacob.e.keller@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Acked-by: NBjorn Helgaas <bhelgaas@google.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Dan Carpenter 提交于
"ifa->ifa_label" is an array inside the in_ifaddr struct. It can never be NULL so we can remove this check. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Reviewed-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
Support IPPROTO_IPV6 similar to IPPROTO_IPIP Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
Explicitly set proto to ETH_P_IP and jump directly to ip processing. Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jacob Keller 提交于
pcie_link_width is the enum used to define the link width values for a pcie device. This enum should not be contained solely in pci_hotplug.h, and this patch moves it next to pci_bus_speed in pci.h Signed-off-by: NJacob Keller <jacob.e.keller@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Acked-by: NBjorn Helgaas <bhelgaas@google.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jacob Keller 提交于
pcie_link_speed and pcix_bus_speed are arrays used by probe.c to correctly convert lnksta register values into the pci_bus_speed enum. These static arrays are useful outside probe for this purpose. This patch makes these defines into conist arrays and exposes them with an extern header in drivers/pci/pci.h -v2- * move extern declarations to drivers/pci/pci.h CC: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: NJacob Keller <jacob.e.keller@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Emil Tantilov 提交于
This patch fixes several issues with the previous implementation of the SFF data dump of SFP+ modules: - removed the __IXGBE_READ_I2C flag - I2C access locking is handled in the HW specific routines - fixed the read loop to read data from ee->offset to ee->len - the reads fail if __IXGBE_IN_SFP_INIT is set in the process - this is needed because on some HW I2C operations can take long time and disrupt the SFP and link detection process Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com> Reported-by: NBen Hutchings <bhutchings@solarflare.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-