- 20 5月, 2006 1 次提交
-
-
由 James Bottomley 提交于
All registered reset callback handlers are called during reset processing. The mptspi modules has its own reset callback handler, just recently added for issuing domain validation after host reset. If either the mptsas or mptfc driver are loaded, this callback could be called. Thus resulting in domain validation being issued for sas or fibre end devices. Fix this by having mptbase.c check the bus type against the driver type and only call the reset handler if they match (or if it's a non-bus specific reset handler). Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
- 28 4月, 2006 1 次提交
-
-
由 Eric Moore 提交于
Bug fix for stack overflow in EventDescriptionStr, (a function for debuging firmware events). We allocated 50 bytes on local stack for buff[], however there are places in the code where we've attempted copying in greater than 50 bytes into buff[]. Signed-off-by: NEric Moore <Eric.Moore@lsil.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
- 26 4月, 2006 2 次提交
-
-
由 Moore, Eric 提交于
mptbase.h bump version number to 3.03.09 remove unneeded flags define workq and remove old fc specific locks mptbase.c initialize new lock and don't initialize two removed locks mptscsih.c when firmware reports target is no longer there, return DID_REQUEUE for fc hosts so that i/o doesn't get killed until the transport has an opportunity to manage the loss via its dev loss timer when the "eh_abort" routine is called, check to see if the driver has the command or not before looking to see if a reset is pending. James Smart and I talked about this and believe that the API for this routine is: if driver doesn't have command, return SUCCESS. This change helps prevent a target from being taken offline. SUCCESS is returned because it's likely that the command completed after error recovery timed it out but before it could be aborted. provide a routine to queue work to newly created workq, and use it. remove "ioc" from mptscsih_abort() it was only used one time. the other references were via hd->ioc, so I just moved it.... net change in references to ioc via hd->ioc is zero move hd->resetPending test and hd->timeouts increment to after the test for whether the command to be aborted remains known to the driver Make certain that the workq exists before queuing work to it. mptfc.c no longer need to lock rport data structures as I was able to single thread the code! I fixed up the debug code to eliminate compilation messages due to type mismatch in the printk. Got rid of some no longer needed rport flags. Initialize and destroy the workq used for the rescan work. simplify the logic regarding the increment of fc_rescan_work_count. use post increment and test for zero vs. pre increment and test for one; eliminate work_count variable: queue_work can be called with the work_lock held as it doesn't sleep Signed-off-by: NMichael Reed <mdr@sgi.com> Signed-off-by: NEric Moore <Eric.Moore@lsil.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Moore, Eric 提交于
This patch handles case where raid hidden components are not being removed when power turned off to device attached to expander, as well as the case of exposing raid components when power is turned back on to devices attached to an expander. (This is a repost of this patch, with mptsas_is_end_device declared further up in the code.) This patch contains some other miscellaneous bug fix's. Signed-off-by: NEric Moore <Eric.Moore@lsil.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
- 15 3月, 2006 3 次提交
-
-
由 Moore, Eric 提交于
Patch previously provided from Adrian Bunk <bunk@stusta.de>, moving some functions to static. This is already in the -mm tree. Signed-off-by: NEric Moore <Eric.Moore@lsil.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Moore, Eric 提交于
Created a debug level MPT_DEBUG_VERBOSE_EVENTS. Moving some of the more vebose debug messages for firwmare events into new debug level. Also added some more firmware events descriptions. Signed-off-by: NEric Moore <Eric.Moore@lsil.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Moore, Eric 提交于
This header is provided to better understand loginfo codes returned by the mpt fusion firmware. Signed-off-by: NEric Moore <Eric.Moore@lsil.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
- 01 3月, 2006 1 次提交
-
-
由 James Bottomley 提交于
This is the first half of a patch to add the generic domain validation to mptspi. It also creates a secondary "virtual" channel for raid component devices since these are now exported with no_uld_attach. What Eric and I would have really liked is to export all physical components on channel 0 and all raid components on channel 1. Unfortunately, this would result in device renumbering on platforms with mixed RAID/Physical devices which was considered unacceptable for userland stability reasons. Still to be done is to plug back the extra parameter setting and DV pieces on reset and hotplug. Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
- 05 2月, 2006 2 次提交
-
-
由 Moore, Eric 提交于
Moving the toolbox call from mptbase.c, over to mptctl.c, and using the mptctl infastructure to issue the call. The existing code is hanging on certain HP platforms when this ioctl is issued, and this patch fix's that. Signed-off-by: NEric Moore <Eric.Moore@lsil.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Moore, Eric 提交于
Use the hard coded value MPTCTL_EVENT_LOG_SIZE to fix bug where in certain cases, the ioc->eventLogSize was initialized. Signed-off-by: NEric Moore <Eric.Moore@lsil.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
- 01 2月, 2006 5 次提交
-
-
由 Moore, Eric 提交于
The ioc->alt_ioc->alt_ioc pointer is not getting cleared during driver unload time. This dangling pointer can result in panic in certain circumstances, such as error recovery, or firmware download in flashless environments. This only impacts dual functions controllers, such as 1030. Please apply. This patch also includes a small cosmetic name change for mpt_spi_log_info. Signed-off-by: NEric Moore <Eric.Moore@lsil.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Christoph Hellwig 提交于
On Mon, Jan 16, 2006 at 06:53:24PM -0700, Moore, Eric wrote: > Adding MSI support, and command line for enabling > it. By default, the command line option has MSI disabled. mpt_msi_enable is initialized to 0 implicitly, no need to do that. Also replace if (mpt_msi_enable == 1) tests with just if (mpt_msi_enable). Updated patch below: Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Moore, Eric 提交于
A customer request to send raid asyn actions from firmware to the event syslog. This shows when raid volumes go degraded, or complete resync, or volumes created/deleted, etc. Signed-off-by: NEric Moore <Eric.Moore@lsil.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Moore, Eric 提交于
Increase the port enable timeout only for SAS from 30 to 300 seconds. A customer request for the handling large topologies. Signed-off-by: NEric Moore <Eric.Moore@lsil.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Moore, Eric 提交于
This patch is for spi. This issues bus reset when driver loads. Handling cases when initator has negotiated for packetized, and target negotiated for non-packetized; effectly this bus reset is getting both target and initiator on the same sheet of music. Signed-off-by: NEric Moore <Eric.Moore@lsil.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
- 15 1月, 2006 4 次提交
-
-
由 Moore, Eric 提交于
The fix is to write 'MPI_HIM_DIM' to the Host Interrupt Mask register, when enabling interrupts. Instead of the tilde of MPI_HIM_RIM. Apparently writing '1's to some of the reserved bits was causing all the bits to go to `1`, which effectly disabled all interrupts. Signed-off-by: NEric Moore <Eric.Moore@lsil.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Moore, Eric 提交于
Add software recognition for the new LSI Logic Fibre Channel controller. Signed-off-by: NEric Moore <Eric.Moore@lsil.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Michael Reed 提交于
Signed-off-by: NMichael Reed <mdr@sgi.com> Signed-off-by: NEric Moore <Eric.Moore@lsil.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Christoph Hellwig 提交于
Convert kmalloc + memset to kzalloc or kcalloc in fusion. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
- 14 12月, 2005 1 次提交
-
-
由 Moore, Eric Dean 提交于
This changes to SPI for the bus_type enumeration. Signed-off-by: NEric Moore <Eric.Moore@lsil.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
- 02 12月, 2005 1 次提交
-
-
由 Moore, Eric Dean 提交于
Syncronization for Domain Validation workqueue and the initiation of the alternate controller. Its possible that dv could be terminated if the workqueue on the 1st channel doesn complete in time before the 2nd channel begins initialization. Signed-off-by: NEric Moore <Eric.Moore@lsil.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
- 30 11月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
This reverts commit 252ac865. It impacts the LSI customers using the mptstm target mode drivers (source tar-ball at ftp://ftp.lsil.com/HostAdapterDrivers/linux/Fusion-MPT/mptstm-1.00.13-src.tar.gz for those who care). Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 09 11月, 2005 2 次提交
-
-
由 Adrian Bunk 提交于
This patch makes the following previously global and EXPORT_SYMBOL'ed code static: - struct mpt_proc_root_dir - int mpt_stm_index Signed-off-by: NAdrian Bunk <bunk@stusta.de> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Olaf Hering 提交于
This patch removes almost all inclusions of linux/version.h. The 3 #defines are unused in most of the touched files. A few drivers use the simple KERNEL_VERSION(a,b,c) macro, which is unfortunatly in linux/version.h. There are also lots of #ifdef for long obsolete kernels, this was not touched. In a few places, the linux/version.h include was move to where the LINUX_VERSION_CODE was used. quilt vi `find * -type f -name "*.[ch]"|xargs grep -El '(UTS_RELEASE|LINUX_VERSION_CODE|KERNEL_VERSION|linux/version.h)'|grep -Ev '(/(boot|coda|drm)/|~$)'` search pattern: /UTS_RELEASE\|LINUX_VERSION_CODE\|KERNEL_VERSION\|linux\/\(utsname\|version\).h Signed-off-by: NOlaf Hering <olh@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 20 9月, 2005 2 次提交
-
-
由 Moore, Eric Dean 提交于
Summary of Changes: * splitting mpt_interrupt per Christophs suggestion about a month ago * rename ScsiCfgData to SpiCfgData structure, then move all the raid related info into new structure called RaidCfgData. This is done because SAS supports RAID, as well as SPI, so the raid stuff should be seperate. * incorrect timeout calculation for cntdn inside WaitForDoorbellAck and WaitForDoortbellInt * add support for interpreting SAS Log Info * Increase Event Log Size from 0xA to 0x32 * Fix bug in mptsas/mptfc/mptspi - when controller has Initiator Mode Disabled, and only running in TargetMode, the mptctl would panic when loading. The fix is to return 0, instead of -ENODEV, in SCSI LLD respective probe routines * Fix bug in mptlan.c - driver will panic if there is host reset, due to dev being set to zero in mpt_lan_ioc_reset * Fix's for SPI - Echo Buffer * Several fix's in mptscsih_io_done - FCP Response info, RESIDUAL_MISMATCH, Data Underrun, etc. * Cleanup Error Handling - EH handlers, mptscsih_flush_cmds, and zeroing out ScsiLookup from mptscsih_qcmd * Cleanup asyn event handling from mptscsih -> mptscsih_event_process. Also added support for SAS Persistent Table Full, an asyn event Signed-off-by: NEric Moore <Eric.Moore@lsil.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Christoph Hellwig 提交于
- various bits for SAS support from the LSI driver. - use the device private data for the fusion target private data. this should be using the midlayer target data framework, but we can't move over to that until fusion has been switched to the generic DV code - use target ID and channel from the fusion target private data, because those in scsi_device will be different for mptsas Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
- 05 9月, 2005 3 次提交
-
-
由 Christoph Hellwig 提交于
Acked by: Moore, Eric Dean <Eric.Moore@lsil.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Christoph Hellwig 提交于
Assorted endianess fixes. I'll work on full endianess annotations later. Acked by: Moore, Eric Dean <Eric.Moore@lsil.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Christoph Hellwig 提交于
Acked by: Moore, Eric Dean <Eric.Moore@lsil.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
- 08 7月, 2005 1 次提交
-
-
由 Pavel Machek 提交于
Few more u32 vs. pm_message_t fixes. Signed-off-by: NPavel Machek <pavel@suse.cz> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 21 5月, 2005 4 次提交
-
-
由 Moore, Eric Dean 提交于
This patch is originally From: Jesper Juhl <juhl-lkml@dif.dk> This patch gets rid of redundant NULL checks prior to calling kfree() in drivers/message/* There are also a few small whitespace changes in there. Signed-off-by: NEric Moore <Eric.Moore@lsil.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Moore, Eric Dean 提交于
* adding pci id support for new Fibre chips, 949X and 939X * adding errata workaround - disabling PIO access except during fwdlb. Signed-off-by: NEric Moore <Eric.Moore@lsil.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Moore, Eric Dean 提交于
Adjust link ordering in the Makefile. Also, the ioc->DoneCtx handles for mptspi/mptfc in the message frame. And I'm now not seeing the panic. Signed-off-by: NEric Moore <Eric.Moore@lsil.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Moore, Eric Dean 提交于
(1) mptbase.c: Move registering pci ids to scsi lld drivers (2) mptbase.c: Use the DMA_32BIT_MASK constant (3) mptbase.c: Fix for multiple pci domains (4) mptbase.c: Remove le32 conversion from BlockSize, which was u8 size (5) mptbase.c: Remove credits, -sralston references , update copyright (6) mptbase.c: split driver support Signed-off-by: NEric Moore <Eric.Moore@lsil.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
- 17 4月, 2005 2 次提交
-
-
由 Pavel Machek 提交于
This fixes u32 vs. pm_message_t in drivers/message. Signed-off-by: NPavel Machek <pavel@suse.cz> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
-