- 04 5月, 2014 28 次提交
-
-
由 Chase Southwood 提交于
This driver no longer reads the eeprom to find the board specific data, all the necessary data is in the boardinfo. Use the boardinfo directly instead of passing through devpriv->s_EeParameters. Signed-off-by: NChase Southwood <chase.southwood@gmail.com> Cc: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Chase Southwood 提交于
The i_IorangeBase1, i_PCIEeprom, and pc_EepromChip data in the boardinfo was only needed to work out the usage of the PCI bars. Now that that is squared away, this info is no longer needed and can be removed. Signed-off-by: NChase Southwood <chase.southwood@gmail.com> Reviewed-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: NIan Abbott <abbotti@mev.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Chase Southwood 提交于
This driver only uses PCI bar 0 (devpriv->i_IobaseAmcc), and PCI bar 1 (dev->iobase), don't bother reading the unused PCI bars. Signed-off-by: NChase Southwood <chase.southwood@gmail.com> Reviewed-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: NIan Abbott <abbotti@mev.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Chase Southwood 提交于
This board always has 32 digital inputs. Remove the test when initializing the subdevice. Also, since this board is the only one supported by this driver, remove the boardinfo about the digital inputs and just use the data directly in the subdevice init. Signed-off-by: NChase Southwood <chase.southwood@gmail.com> Reviewed-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: NIan Abbott <abbotti@mev.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Chase Southwood 提交于
This include is no longer needed. Signed-off-by: NChase Southwood <chase.southwood@gmail.com> Cc: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Chase Southwood 提交于
Reading the eeprom on this board is not necessary. All information required is in the boardinfo. Remove the eeprom support code which is not really useful here. Signed-off-by: NChase Southwood <chase.southwood@gmail.com> Cc: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Christian Engelmayer 提交于
Some board pointer are assigned twice via comedi_board() in the comedi low level driver attach functions. Remove the duplicate assignment from the variable definition where the pointer is not used anyway until assigned later in the function when dev->board_ptr, that comedi_board() relies on, is setup correctly. Signed-off-by: NChristian Engelmayer <cengelma@gmx.at> Reviewed-by: NIan Abbott <abbotti@mev.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alan Cox 提交于
This is a bug fix that has been lurking in the Google tree but not pushed upstream. From: Octavian Purdila <octavian.purdila@intel.com> The memory region is already reserved in goldfish_init() during platform init. Signed-off-by: NOctavian Purdila <octavian.purdila@intel.com> Signed-off-by: NJun Tian <jun.j.tian@intel.com> Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alan 提交于
The base code imported from the Google tree is ifdef heaven. Prepare to fix this by adding a helper function. Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Jun Tian 提交于
Enable the 64-bit nand data support in the goldfish nand driver. Signed-off-by: NJun Tian <jun.j.tian@intel.com> Signed-off-by: NOctavian Purdila <octavian.purdila@intel.com> Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Jun Tian 提交于
Enable the 64-bit goldfish audio driver. Support 64-bit buffer address and data read/write. Signed-off-by: NJun Tian <jun.j.tian@intel.com> Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Seunghun Lee 提交于
This patch fixes "Missing a blank line after declarations" warnings. Signed-off-by: NSeunghun Lee <waydi1@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Dan Carpenter 提交于
The white space was all wrong here. The case statements were indented too far. The if else blocks weren't indented at all. There was a break statement aligned with the else block and it confused my static checker because "were curly braces intended" so that the break statement was only on the else side? Also I removed some commented out code. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Dan Carpenter 提交于
There were a couple lines which were not indented far enough and it was confusing. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Dan Carpenter 提交于
The for loop body wasn't indented so it upset my static checker. Also I removed an obsolete comment on the same line. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Dan Carpenter 提交于
"*(p + 1)" and "len" are the same thing. For reviewers who don't know that, then this code is worrying because we cap "len", but pass "*(p + 1)" to memcpy(). I have changed the code to use "len" throughout. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Sarath Lakshman 提交于
Fold a line to make it less than 80 characters Signed-off-by: NSarath Lakshman <sarathlakshman@slynux.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Fredrick John Berchmans 提交于
Change old way of ops->setsockopt or ops->getsockopt in kernel to kernel_setsockopt or kernel_getsockopt. Signed-off-by: NFredrick John Berchmans <fredrickprashanth@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Geert Uytterhoeven 提交于
If CONFIG_FS_POSIX_ACL=n: drivers/staging/lustre/lustre/llite/xattr.c: In function 'll_setxattr_common': drivers/staging/lustre/lustre/llite/xattr.c:115:27: warning: unused variable 'rce' [-Wunused-variable] Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Geert Uytterhoeven 提交于
drivers/staging/lustre/lustre/llite/rw26.c: In function 'll_direct_IO_26': drivers/staging/lustre/lustre/llite/rw26.c:383:2: warning: format '%lu' expects argument of type 'long unsigned int', but argument 6 has type 'ssize_t' [-Wformat] drivers/staging/lustre/lustre/llite/rw26.c:383:2: warning: format '%lu' expects argument of type 'long unsigned int', but argument 10 has type 'ssize_t' [-Wformat] Join the quoted string split across lines to fix a checkpatch warning while we're at it. Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Geert Uytterhoeven 提交于
When CONFIG_SMP=n: drivers/staging/lustre/include/linux/libcfs/linux/linux-mem.h:58:31: fatal error: libcfs/libcfs_cpu.h: No such file or directory drivers/staging/lustre/lustre/libcfs/libcfs_cpu.c:78:1: error: redefinition of 'cfs_cpt_table_print' drivers/staging/lustre/include/linux/libcfs/libcfs_cpu.h:109:1: note: previous definition of 'cfs_cpt_table_print' was here Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Dan Carpenter 提交于
The obd_ioctl_getdata() function caps "data->ioc_len" at OBD_MAX_IOCTL_BUFFER and then calls this obd_ioctl_is_invalid() to check that the other values inside data are valid. There are several lengths inside data but when they are added together they must not be larger than "data->ioc_len". The checks against "(data->ioc_inllen1 > (1<<30))" are supposed to ensure that the addition does not have an integer overflow. But "(1<<30) * 4" actually can overflow 32 bits, so the checks are insufficient. I have changed it to "> OBD_MAX_IOCTL_BUFFER" instead. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Oleg Drokin 提交于
Pointer 'ni' checked for NULL at line 1569 may be passed to function and may be dereferenced there by passing argument 1 to function 'lnet_ni_notify_locked' at line 1621. found by Klocwork Insight tool Signed-off-by: NOleg Drokin <oleg.drokin@intel.com> CC: Dmitry Eremin <dmitry.eremin@intel.com> CC: Liang Zhen <liang.zhen@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Dmitry Eremin 提交于
Null pointer 'cp' that comes from line 2544 may be dereferenced at line 2618. found by Klocwork Insight tool Signed-off-by: NDmitry Eremin <dmitry.eremin@intel.com> Reviewed-on: http://review.whamcloud.com/9386 Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4629Reviewed-by: NJohn L. Hammond <john.hammond@intel.com> Reviewed-by: NIsaac Huang <he.huang@intel.com> Signed-off-by: NOleg Drokin <oleg.drokin@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Dmitry Eremin 提交于
Local variable 'hash' is never used found by Klocwork Insight tool Signed-off-by: NDmitry Eremin <dmitry.eremin@intel.com> Reviewed-on: http://review.whamcloud.com/9386 Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4629Reviewed-by: NJohn L. Hammond <john.hammond@intel.com> Reviewed-by: NIsaac Huang <he.huang@intel.com> Signed-off-by: NOleg Drokin <oleg.drokin@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Oleg Drokin 提交于
It should never be NULL because our interface list is up to date, and even if it does, we'll just crash anyway so we are no better off. Signed-off-by: NOleg Drokin <oleg.drokin@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Oleg Drokin 提交于
Insted of meddling directly in process environment variables (which is also not possible on certain platforms due to not exported symbols), create jobid_name proc file to represent this info (to be filled by job scheduler epilogue). Signed-off-by: NOleg Drokin <oleg.drokin@intel.com> CC: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Vitaly Osipov 提交于
In ll_ioctl_fiemap(), a user-supplied value is used to calculate a length of a buffer which is later allocated with user data. Signed-off-by: NVitaly Osipov <vitaly.osipov@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 28 4月, 2014 12 次提交
-
-
由 Greg Kroah-Hartman 提交于
-
由 Linus Torvalds 提交于
-
由 Will Deacon 提交于
The asm-generic, big-endian version of zero_bytemask creates a mask of bytes preceding the first zero-byte by left shifting ~0ul based on the position of the first zero byte. Unfortunately, if the first (top) byte is zero, the output of prep_zero_mask has only the top bit set, resulting in undefined C behaviour as we shift left by an amount equal to the width of the type. As it happens, GCC doesn't manage to spot this through the call to fls(), but the issue remains if architectures choose to implement their shift instructions differently. An example would be arch/arm/ (AArch32), where LSL Rd, Rn, #32 results in Rd == 0x0, whilst on arch/arm64 (AArch64) LSL Xd, Xn, #64 results in Xd == Xn. Rather than check explicitly for the problematic shift, this patch adds an extra shift by 1, replacing fls with __fls. Since zero_bytemask is never called with a zero argument (has_zero() is used to check the data first), we don't need to worry about calling __fls(0), which is undefined. Cc: <stable@vger.kernel.org> Cc: Victor Kamensky <victor.kamensky@linaro.org> Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
This merges the patch to fix possible loss of dirty bit on munmap() or madvice(DONTNEED). If there are concurrent writers on other CPU's that have the unmapped/unneeded page in their TLBs, their writes to the page could possibly get lost if a third CPU raced with the TLB flush and did a page_mkclean() before the page was fully written. Admittedly, if you unmap() or madvice(DONTNEED) an area _while_ another thread is still busy writing to it, you deserve all the lost writes you could get. But we kernel people hold ourselves to higher quality standards than "crazy people deserve to lose", because, well, we've seen people do all kinds of crazy things. So let's get it right, just because we can, and we don't have to worry about it. * safe-dirty-tlb-flush: mm: split 'tlb_flush_mmu()' into tlb flushing and memory freeing parts
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs由 Linus Torvalds 提交于
Pull btrfs fixes from Chris Mason. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: limit the path size in send to PATH_MAX Btrfs: correctly set profile flags on seqlock retry Btrfs: use correct key when repeating search for extent item Btrfs: fix inode caching vs tree log Btrfs: fix possible memory leaks in open_ctree() Btrfs: avoid triggering bug_on() when we fail to start inode caching task Btrfs: move btrfs_{set,clear}_and_info() to ctree.h btrfs: replace error code from btrfs_drop_extents btrfs: Change the hole range to a more accurate value. btrfs: fix use-after-free in mount_subvol()
-
git://ftp.arm.linux.org.uk/~rmk/linux-arm由 Linus Torvalds 提交于
Pull arm fixes from Russell King: "A number of fixes for the PJ4/iwmmxt changes which arm-soc forced me to take during the merge window. This stuff should have been better tested and sorted out *before* the merge window" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8042/1: iwmmxt: allow to build iWMMXt on Marvell PJ4B ARM: 8041/1: pj4: fix cpu_is_pj4 check ARM: 8040/1: pj4: properly detect existence of iWMMXt coprocessor ARM: 8039/1: pj4: enable iWMMXt only if CONFIG_IWMMXT is set ARM: 8038/1: iwmmxt: explicitly check for supported architectures
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux由 Linus Torvalds 提交于
Pull arm64 fixes from Catalin Marinas: - compat renameat2 syscall wiring and __NR_compat_syscalls fix - TLB fix for transparent huge pages following switch to generic mmu_gather - spinlock initialisation for init_mm's context - move of_clk_init() earlier - Kconfig duplicate entry fix * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: init: Move of_clk_init to time_init arm64: initialize spinlock for init_mm's context arm64: debug: remove noisy, pointless warning arm64: mm: Add THP TLB entries to general mmu_gather arm64: add renameat2 compat syscall ARM64: Remove duplicated Kconfig entry for "kernel/power/Kconfig" arm64: __NR_compat_syscalls fix
-
由 Oleg Drokin 提交于
Quiet the warning below in Lustre code. Actually the warning is invalid since we either always assign the symname in ll_readlink_internal or return an error there and then the following rc check would assign symlink variable explicitly. In file included from /home/green/bk/linux/drivers/staging/lustre/lustre/llite/../include/linux/lustre_compat25.h:41:0, from /home/green/bk/linux/drivers/staging/lustre/lustre/llite/../include/linux/lvfs.h:48, from /home/green/bk/linux/drivers/staging/lustre/lustre/llite/../include/lvfs.h:45, from /home/green/bk/linux/drivers/staging/lustre/lustre/llite/../include/obd_support.h:41, from /home/green/bk/linux/drivers/staging/lustre/lustre/llite/../include/obd_class.h:40, from /home/green/bk/linux/drivers/staging/lustre/lustre/llite/../include/linux/lustre_lite.h:49, from /home/green/bk/linux/drivers/staging/lustre/lustre/llite/../include/lustre_lite.h:45, from /home/green/bk/linux/drivers/staging/lustre/lustre/llite/symlink.c:42: /home/green/bk/linux/drivers/staging/lustre/lustre/llite/symlink.c: In function ‘ll_follow_link’: /home/green/bk/linux/include/linux/namei.h:88:29: warning: ‘symname’ may be used uninitialized in this function [-Wmaybe-uninitialized] nd->saved_names[nd->depth] = path; ^ /home/green/bk/linux/drivers/staging/lustre/lustre/llite/symlink.c:123:8: note: ‘symname’ was declared here char *symname; ^ Signed-off-by: NOleg Drokin <oleg.drokin@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull irq fixes from Thomas Gleixner: "A slighlty large fix for a subtle issue in the CPU hotplug code of certain ARM SoCs, where the not yet online cpu needs to setup the cpu local timer and needs to set the interrupt affinity to itself. Setting interrupt affinity to a not online cpu is prohibited and therefor the timer interrupt ends up on the wrong cpu, which leads to nasty complications. The SoC folks tried to hack around that in the SoC code in some more than nasty ways. The proper solution is to have a way to enforce the affinity setting to a not online cpu. The core patch to the genirq code provides that facility and the follow up patches make use of it in the GIC interrupt controller and the exynos timer driver. The change to the core code has no implications to existing users, except for the rename of the locked function and therefor the necessary fixup in mips/cavium. Aside of that, no runtime impact is possible, as none of the existing interrupt chips implements anything which depends on the force argument of the irq_set_affinity() callback" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource: Exynos_mct: Register clock event after request_irq() clocksource: Exynos_mct: Use irq_force_affinity() in cpu bringup irqchip: Gic: Support forced affinity setting genirq: Allow forcing cpu affinity of interrupts
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty由 Linus Torvalds 提交于
Pull tty/serial fixes from Greg KH: "Here are a few tty/serial fixes for 3.15-rc3 that resolve a number of reported issues in the 8250 and samsung serial drivers, as well as a character loss fix for the tty core that was caused by the lock removal patches a release ago" * tag 'tty-3.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial_core: fix uart PORT_UNKNOWN handling serial: samsung: Change barrier() to cpu_relax() in console output serial: samsung: don't check config for every character serial: samsung: Use the passed in "port", fixing kgdb w/ no console serial: 8250: Fix thread unsafe __dma_tx_complete function 8250_core: Fix unwanted TX chars write tty: Fix race condition between __tty_buffer_request_room and flush_to_ldisc
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging由 Linus Torvalds 提交于
Pull staging / IIO driver fixes from Greg KH: "Here are some small staging and IIO driver fixes for 3.15-rc3. Nothing major at all, just some assorted issues that people have reported" * tag 'staging-3.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: comedi: usbdux: bug fix for accessing 'ao_chanlist' in private data iio: adc: mxs-lradc: fix warning when buidling on avr32 iio: cm36651: Fix i2c client leak and possible NULL pointer dereference iio: querying buffer scan_mask should return 0/1 staging:iio:ad2s1200 fix a missing break iio: adc: at91_adc: correct default shtim value ARM: at91: at91sam9260: change at91_adc name ARM: at91: at91sam9g45: change at91_adc name iio: cm32181: Fix read integration time function iio: adc: at91_adc: Repair broken platform_data support
-
由 Bobi Jam 提交于
lov_fiemap() does not take consider its @vallen parameter, which is the max buffer size the caller can hold for the fiemap extents. This patch fixes this and limits the max mapped fiemap extent count to fit in the preallocted buffer. This patch also fixes a memory out of bound write issue when the fiemap call is only for detecting the number of existing extent. Signed-off-by: NBobi Jam <bobijam.xu@intel.com> Reviewed-on: http://review.whamcloud.com/9834 Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4619Reviewed-by: NFan Yong <fan.yong@intel.com> Reviewed-by: NPatrick Farrell <paf@cray.com> Signed-off-by: NOleg Drokin <oleg.drokin@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-