- 04 2月, 2006 11 次提交
-
-
由 Joel Becker 提交于
Signed-off-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Mark Fasheh 提交于
Fix a couple of compile warnings found when compiling on a ppc64 build box. Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
this changes if() BUG(); constructs to BUG_ON() which is cleaner, contains unlikely() and can better optimized away. Signed-off-by: NEric Sesterhenn <snakebyte@gmx.de> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Adrian Bunk 提交于
fs/ocfs2/dlm/dlmrecovery.c does now use msleep(), and does therefore need to #include <linux/delay.h> for getting the prototype of this function. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Arjan van de Ven 提交于
Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: NArjan van de Ven <arjan@infradead.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Kurt Hackel 提交于
* fix a hang which can occur during shutdown migration * do not allow nodes to join during recovery * when restarting lock mastery, do not ignore nodes which come up * more than one node could become recovery master, fix this * sleep to allow some time for heartbeat state to catch up to network * extra debug info for bad recovery state problems * make DLM_RECO_NODE_DATA_DONE a valid state for non-master recovery nodes * prune all locks from dead nodes on $RECOVERY lock resources * do NOT automatically add new nodes to mle nodemaps until they have properly joined the domain * make sure dlm_pick_recovery_master only exits when all nodes have synced * properly handle dlmunlock errors in dlm_pick_recovery_master * do not propagate network errors in dlm_send_begin_reco_message * dead nodes were not being put in the recovery map sometimes, fix this * dlmunlock was failing to clear the unlock actions on DLM_DENIED Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 J. Bruce Fields 提交于
Update ocfs2.txt to add "cluster aware lockf" under missing features. Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Mark Fasheh 提交于
ip_io_sem is now ip_io_mutex. Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Jeff Mahoney 提交于
Including <asm/signal.h> results in compilation failure on ia64 due to not including <linux/compiler.h> Including <linux/signal.h> corrects the problem. Please apply. Signed-off-by: NJeff Mahoney <jeffm@suse.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Adrian Bunk 提交于
Functions called by __init funtions mustn't be __exit. Reported by Jan-Benedict Glaw <jbglaw@lug-owl.de>. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Joel Becker 提交于
Signed-off-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
- 03 2月, 2006 7 次提交
-
-
由 Linus Torvalds 提交于
-
由 Stefan Bader 提交于
This is a fix to the device-mapper-log-bitset-fix-endian patch that switched to ext2_* versions of the set and clear bit functions. The find_next_zero_bit function also has to be the ext2 one. Otherwise the mirror target tries to recover non-existent regions beyond the end of device. Signed-off-by: NStefan Bader <shbader@de.ibm.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
.. just as we already have for raid5. Signed-off-by: NNeil Brown <neilb@suse.de> Cc: Greg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
While a read-only array doesn't not really need a bitmap, we should not remove the bitmap when switching an array to read-only because a/ There is no code to re-add the bitmap which switching to read-write, b/ There is insufficient locking - the bitmap could be accessed while it is being removed. Cc: Reuben Farrelly <reuben-lkml@reub.net> Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
super_1_sync only updates fields in the superblock that might have changed. 'raid_disks' and 'size' could have changed, but this information doesn't get updated.... until this patch. Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
As 'array_size' is a 'sector_t', it may overflow inappropriately when shifted 10 bits. So We should cast it to a loff_t first. There are two places with this problem, but the second (in update_raid_disks) isn't needed so just remove it: The only personality that handles ->reshape currently is raid1, and it doesn't change the size of the array. When added for raid5/6, reshape again won't change the size of the array, at least not straight away. This code might be need for reshaping 'linear' but linear->shape, if implemented, should probably do the i_size_write itself. Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 02 2月, 2006 22 次提交
-
-
由 Jeremy Higdon 提交于
Problem caused by the fact that the code used to only pick the low 16 bits of the bytecount. That may be how some controllers act on it (byte count of 0 means 0x10000), but not for this particular hardware. Signed-off-by: NJeremy Higdon <jeremy@sgi.com> Acked-by: NJes Sorensen <jes@sgi.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dave Airlie 提交于
From: Arjan van de Ven <arjan@infradead.org> Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: NArjan van de Ven <arjan@infradead.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NDave Airlie <airlied@linux.ie>
-
由 Dave Airlie 提交于
From: Adrian Bunk <bunk@stusta.de> This patch makes some needlessly global functions static. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NDave Airlie <airlied@linux.ie>
-
由 Stephen Rothwell 提交于
Most of the 64 bit architectures will zero extend the first argument to compat_sys_{openat,newfstatat,futimesat} which will fail if the 32 bit syscall was passed AT_FDCWD (which is a small negative number). Declare the first argument to be an unsigned int which will force the correct sign extension when the internal functions are called in each case. Also, do some small white space cleanups in fs/compat.c. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
-
由 Linas Vepstas 提交于
Build break: Building PCI hotplug on PowerPC results in a build break, due to failure to export symbols. Reported today by Dave Jones <davej@redhat.com>: drivers/pci/hotplug/rpaphp.ko needs unknown symbol pcibios_add_pci_devices This patch fixes same problem in drivers/pci tree Previous patch fixes the break in the arch/powerpc tree. Signed-off-by: NLinas Vepstas <linas@austin.ibm.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linas Vepstas 提交于
Build break: Building PCI hotplug on PowerPC results in a build break, due to failure to export symbols. Reported today by Dave Jones <davej@redhat.com>: drivers/pci/hotplug/rpaphp.ko needs unknown symbol pcibios_add_pci_devices This patch fixes the break in the arch/powerpc tree. Next patch fixes same problem in drivers/pci tree Signed-off-by: NLinas Vepstas <linas@austin.ibm.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Steve French 提交于
Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Trond Myklebust 提交于
RPCAUTH_CRED_LOCKED, and RPC_AUTH_PROC_CREDS are unused. Kill them. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Dirk Mueller 提交于
Only do a sync_retry if the memcmp failed. Signed-off-by: NDirk Mueller <dmueller@suse.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
This fixes a bug whereby if two processes try to look up the same auth_gss credential, they may end up creating two creds, and triggering two upcalls because the upcall is performed before the credential is added to the credcache. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
The function rpc_timeout_upcall_queue runs from a workqueue, and hence sleeping is not recommended. Convert the protection of the upcall queue from being mutex-based to being spinlock-based. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
When we look up a new cred in the auth_gss downcall so that we can stuff the credcache, we do not want that lookup to queue up an upcall in order to initialise it. To do an upcall here not only redundant, but since we are already holding the inode->i_mutex, it will trigger a lock recursion. This patch allows rpcauth cache searches to indicate that they can cope with uninitialised credentials. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
If the server returns NLM_LCK_DENIED_NOLOCKS, we currently retry the entire NLM_CANCEL request. This may end up looping forever unless the server changes its mind (why would it do that, though?). Ensure that we limit the number of retries (to 3). See bug# 5957 in bugzilla.kernel.org. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
The OpenGroup docs state that the arguments "block", "exclusive" and "alock" must exactly match the arguments for the lock call that we are trying to cancel. Currently, "block" is always set to false, which is wrong. See bug# 5956 on bugzilla.kernel.org. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Randy Dunlap 提交于
Remove lots of trailing whitespace. Nothing else. Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Randy Dunlap 提交于
- Add info that structs, unions, enums, and typedefs are supported. - Add doc about "private:" and "public:" tags for struct fields. - Fix some typos. - Remove some trailing whitespace. Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Martin Waitz 提交于
Update some parameter descriptions to actually match the code. Signed-off-by: NMartin Waitz <tali@admingilde.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>