- 11 10月, 2007 40 次提交
-
-
由 Roland Dreier 提交于
Signed-off-by: NRoland Dreier <rolandd@cisco.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Roland Dreier 提交于
Commit da3dedd9 ("[NET]: Make NAPI polling independent of struct net_device objects.") changed the interface to NAPI polling. Fix up the ibm_emac driver so that it works with this new interface. This is actually a nice cleanup because ibm_emac is one of the drivers that wants to have multiple NAPI structures for a single net_device. Tested with the internal MAC of a PowerPC 440SPe SoC with an AMCC 'Yucca' evaluation board. Signed-off-by: NRoland Dreier <rolandd@cisco.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Roland Dreier 提交于
The conversion to use netdevice internal stats left an unused variable in ipoib_neigh_free(), since there's no longer any reason to get netdev_priv() in order to increment dropped packets. Delete the unused priv variable. Signed-off-by: NRoland Dreier <rolandd@cisco.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Mark Brown 提交于
The natsemi driver has a define NATSEMI_TIMER_FREQ which looks like it controls the normal frequency of the chip poll timer but in fact only takes effect for the first run of the timer. Adjust the value of the define to match that used by the timer and use the define consistently. Signed-off-by: NMark Brown <broonie@sirena.org.uk> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Stephen Hemminger 提交于
Fix warnings from sparse related to shadowed variables and routines that should be declared static. Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Stephen Hemminger 提交于
Fix problems detected by sparse: 1. whole chunk of MAC code was for defined and never used 2. hook for running ext intr in workqueue wasn't being used Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jan-Bernd Themann 提交于
eHEA recovery and DLPAR functions are called seldomly. The eHEA workqueues are replaced by the kernel event queue. Signed-off-by: NJan-Bernd Themann <themann@de.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Stephen Hemminger 提交于
Fix some of the easy warnings in network device drivers. Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Stephen Hemminger 提交于
Fix warnings from sparse checker about shadowed definition and improperly formatted ethtool_strings. Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Auke Kok 提交于
After a cable unplug the forced flow control settings were lost accidentally and the flow control settings fell back to the default EEPROM determined values. This breaks for people who want to run without fc enabled - after a cable reset the driver would refuse to run with fc disabled. Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Auke Kok 提交于
After an e1000 patch from Krishna Kumar <krkumar2@in.ibm.com>. Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Krishna Kumar 提交于
Some simple optimizations in e1000_xmit_frame. Signed-off-by: NKrishna Kumar <krkumar2@in.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Mattias Nissler 提交于
The decryption handlers will skip the frame if the RX_FLAG_DECRYPTED flag is set, so the early flag setting introduced by Johannes breaks decryption. To work around this, call the handlers first and then set the flag. Signed-off-by: NMattias Nissler <mattias.nissler@gmx.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 John W. Linville 提交于
Problem description by Daniel Drake <dsd@gentoo.org>: "This sequence of events causes loss of connectivity: <plug in> <associate as normal in managed mode> ifconfig eth7 down iwconfig eth7 mode monitor ifconfig eth7 up ifconfig eth7 down iwconfig eth7 mode managed <associate as normal> At this point you are associated but TX does not work. This is because the eth7 hard_start_xmit is still ieee80211_monitor_start_xmit." The problem is caused by ieee80211_if_set_type checking for a non-zero hard_start_xmit pointer value in order to avoid changing that value for master devices. The fix is to make that check more explicitly linked to master devices rather than simply checking if the value has been previously set. CC: Daniel Drake <dsd@gentoo.org> Acked-by: NMichael Wu <flamingice@sourmilk.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Holger Schurig 提交于
Make the get-nickname wireless extension actually work. Before this patch, I could do "iwconfig eth1 nick BLAH" but "iwconfig eth1" would have still showed "MRVL-USB8388" to me. Hey, and that was wrong anyway, I'm on a CF card, not on USB :-) Signed-off-by: NHolger Schurig <hs4233@mail.mn-solutions.de> Acked-By: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Holger Schurig 提交于
This makes scripts/checkincludes.pl happy. Signed-off-by: NHolger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Holger Schurig 提交于
* make scan debug output cleaner * change some LBS_DEB_ASSOC messages to LBS_DEB_SCAN, which is more correct * move helper functions together * print function return value in the tracing code at one central location Signed-off-by: NHolger Schurig <hs4233@mail.mn-solutions.de> Acked-By: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Holger Schurig 提交于
This fixes three "warning: Using plain integer as NULL pointer" sparse warnings. Signed-off-by: NHolger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Holger Schurig 提交于
Fix a debug statement Signed-off-by: NHolger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Geert Uytterhoeven 提交于
Some versions of gcc replace strstr() calls with a single-character `needle' parameter by strchr() behind our back. This causes a link error if strchr() is defined as an inline function in <asm/string.h> (e.g. on m68k): | drivers/built-in.o: In function `libertas_parse_chan': | linux/drivers/net/wireless/libertas/debugfs.c:209: undefined reference to `strchr' | drivers/built-in.o: In function `libertas_parse_ssid': | linux/drivers/net/wireless/libertas/debugfs.c:260: undefined reference to `strchr' Avoid this by explicitly calling strchr() instead. Also include <linux/string.h>, because this file calls lots of str*() routines. Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Acked-By: NHolger Schurig <hs4233@mail.mn-solutions.de> Acked-By: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Holger Schurig 提交于
Don't write constants that are (per documentation and struct) u8 as 0x0001, use 0x01 instead. Also remove an useless cast. Signed-off-by: NHolger Schurig <hs4233@mail.mn-solutions.de> Acked-By: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Dan Williams 提交于
The 88w8385 chip, using SDIO interface and firmware release 5.0.11p0, has problems when both unicast and multicast WPA keys are set in one command. This patch ensures the keys are set independently. The original author of this patch is Marc Pignat <marc.pignat@hevs.ch> Signed-off-by: NMarc Pignat <marc.pignat@hevs.ch> Signed-off-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
Version bump Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
When skb_push() is used we should memset the memory before usage. This will prevent bugs which could occur when the data is treated as TX descriptor. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
By defining rt73usb_get_tsf to NULL we only have 1 location that needs to be edited when rt73usb_get_tsf can be enabled again. This also reduces the number of #ifdefs in the code which is also a "good thing" Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
Reorganize configuration handling by creating a extra structure which contains precalculated values based on the mac80211 values which are usefull for all individual drivers. This also fixes the preamble configuration problem, up untill now preamble was never configured since by default the rate->val value was used when changing the mode. Now rate->val will only be used to set the basic rate mask. The preamble configuration will now be done correctly through the erp_ie_changed callback function. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
Make some small optimizations by removing some simple if-statements. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
Directly pass a value from the enum dev_state with rt2x00lib_toggle_rx, this will save us a ? : statement, and it is clearer then passing a 1 0 argument. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
The TX datalen must always be converted to a value rt73 and rt2500usb understand. Both require to use a different size then skb->len. First off this is required because the descriptor must be added, but the second is because the value must be a multiple of either 2 or 4, and it should not be a multiple of the USB packetmax Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
rt61pci contained 1 line of 88 characters width, this needs to be cut down. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
get_duration expects all speeds to be passed in 100kbs, this means that passing 2 is incorrect and should be raised to 20 Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
All drivers use the same values for TSF sync, this will move the value determination into rt2x00config.c, and the definition for the values to rt2x00reg.h Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
As reported by Modestas Vainius, enabling rkfill in 1 driver and disabling it in a second could cause a NULL pointer exception when the rfkill-disabled driver still sets the CONFIG_SUPPORT_HW_BUTTON flag. Furthermore, rfkill expects the timeout as a value in milliseconds instead of jiffies. Also increase the timeout to a second, since this 250ms would be overkill. Also the flag DEVICE_ENABLED_RADIO_HW is causing problems for devices which do not support the hardware button while rfkill is enabled in the driver. To remidy this we should inverse the flag and its meaning, rename the flag to DEVICE_DISABLED_RADIO_HW this means that by default the radio is enabled by the hardware button (if present) and can only be disabled explicitely. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
We shouldn't use changed_flags when configuring the packet filter, we work directly with the total_flags which is safe enough since we already check if something has changed after we applied our packet filtering flag rules. Also make sure that when the packet filter is scheduled, the rt2x00dev->interface.filter is cleared to make sure the drivers will update the packet filter instead of failing at the check: *total_flags == rt2x00dev->interface.filter Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
By putting the flags into a enumeration we can make it easier maintable since we don't have to assign numbers for each flag. This makes it easier to insert and remove flags. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
Store the started state into a new flag DEVICE_STARTED_SUSPEND and set this when suspending while the device was started. We can't check for is_interface_present() since only mac80211 knows if there are monitor interfaces present. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
Don't check if the radio is enabled in rt2x00lib_toggle_rx, this is required since the link tuner should be disabled when shutting down the device. The remaining calls inside the rt2x00lib_toggle_rx handler should deliver no problems when called while the radio is done. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
The various drivers contained duplicate code to handle the MAC and BSSID initialization correctly. This moves the address copy to little endian variables to rt2x00config. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Martti Huttunen 提交于
Add the device ID for Linksys WUSB54AG. Signed-off-by: NMichael Wu <flamingice@sourmilk.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Wu 提交于
This adds the device ID for the HP wireless print kit usb dongle. Thanks to Thierry Merle for the patch to the original rtl8187 driver. Signed-off-by: NMichael Wu <flamingice@sourmilk.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-