- 22 5月, 2010 40 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6由 Linus Torvalds 提交于
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (36 commits) PCI: hotplug: pciehp: Removed check for hotplug of display devices PCI: read memory ranges out of Broadcom CNB20LE host bridge PCI: Allow manual resource allocation for PCI hotplug bridges x86/PCI: make ACPI MCFG reserved error messages ACPI specific PCI hotplug: Use kmemdup PM/PCI: Update PCI power management documentation PCI: output FW warning in pci_read/write_vpd PCI: fix typos pci_device_dis/enable to pci_dis/enable_device in comments PCI quirks: disable msi on AMD rs4xx internal gfx bridges PCI: Disable MSI for MCP55 on P5N32-E SLI x86/PCI: irq and pci_ids patch for additional Intel Cougar Point DeviceIDs PCI: aerdrv: trivial cleanup for aerdrv_core.c PCI: aerdrv: trivial cleanup for aerdrv.c PCI: aerdrv: introduce default_downstream_reset_link PCI: aerdrv: rework find_aer_service PCI: aerdrv: remove is_downstream PCI: aerdrv: remove magical ROOT_ERR_STATUS_MASKS PCI: aerdrv: redefine PCI_ERR_ROOT_*_SRC PCI: aerdrv: rework do_recovery PCI: aerdrv: rework get_e_source() ...
-
git://git.infradead.org/iommu-2.6由 Linus Torvalds 提交于
* git://git.infradead.org/iommu-2.6: intel-iommu: Set a more specific taint flag for invalid BIOS DMAR tables intel-iommu: Combine the BIOS DMAR table warning messages panic: Add taint flag TAINT_FIRMWARE_WORKAROUND ('I') panic: Allow warnings to set different taint flags intel-iommu: intel_iommu_map_range failed at very end of address space intel-iommu: errors with smaller iommu widths intel-iommu: Fix boot inside 64bit virtualbox with io-apic disabled intel-iommu: use physfn to search drhd for VF intel-iommu: Print out iommu seq_id intel-iommu: Don't complain that ACPI_DMAR_SCOPE_TYPE_IOAPIC is not supported intel-iommu: Avoid global flushes with caching mode. intel-iommu: Use correct domain ID when caching mode is enabled intel-iommu mistakenly uses offset_pfn when caching mode is enabled intel-iommu: use for_each_set_bit() intel-iommu: Fix section mismatch dmar_ir_support() uses dmar_tbl.
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus由 Linus Torvalds 提交于
* 'virtio' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: (27 commits) drivers/char: Eliminate use after free virtio: console: Accept console size along with resize control message virtio: console: Store each console's size in the console structure virtio: console: Resize console port 0 on config intr only if multiport is off virtio: console: Add support for nonblocking write()s virtio: console: Rename wait_is_over() to will_read_block() virtio: console: Don't always create a port 0 if using multiport virtio: console: Use a control message to add ports virtio: console: Move code around for future patches virtio: console: Remove config work handler virtio: console: Don't call hvc_remove() on unplugging console ports virtio: console: Return -EPIPE to hvc_console if we lost the connection virtio: console: Let host know of port or device add failures virtio: console: Add a __send_control_msg() that can send messages without a valid port virtio: Revert "virtio: disable multiport console support." virtio: add_buf_gfp trans_virtio: use virtqueue_xxx wrappers virtio-rng: use virtqueue_xxx wrappers virtio_ring: remove a level of indirection virtio_net: use virtqueue_xxx wrappers ... Fix up conflicts in drivers/net/virtio_net.c due to new virtqueue_xxx wrappers changes conflicting with some other cleanups.
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
* 'kvm-updates/2.6.35' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (269 commits) KVM: x86: Add missing locking to arch specific vcpu ioctls KVM: PPC: Add missing vcpu_load()/vcpu_put() in vcpu ioctls KVM: MMU: Segregate shadow pages with different cr0.wp KVM: x86: Check LMA bit before set_efer KVM: Don't allow lmsw to clear cr0.pe KVM: Add cpuid.txt file KVM: x86: Tell the guest we'll warn it about tsc stability x86, paravirt: don't compute pvclock adjustments if we trust the tsc x86: KVM guest: Try using new kvm clock msrs KVM: x86: export paravirtual cpuid flags in KVM_GET_SUPPORTED_CPUID KVM: x86: add new KVMCLOCK cpuid feature KVM: x86: change msr numbers for kvmclock x86, paravirt: Add a global synchronization point for pvclock x86, paravirt: Enable pvclock flags in vcpu_time_info structure KVM: x86: Inject #GP with the right rip on efer writes KVM: SVM: Don't allow nested guest to VMMCALL into host KVM: x86: Fix exception reinjection forced to true KVM: Fix wallclock version writing race KVM: MMU: Don't read pdptrs with mmu spinlock held in mmu_alloc_roots KVM: VMX: enable VMXON check with SMX enabled (Intel TXT) ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus由 Linus Torvalds 提交于
* 'modules' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: module: drop the lock while waiting for module to complete initialization. MODULE_DEVICE_TABLE(isapnp, ...) does nothing hisax_fcpcipnp: fix broken isapnp device table. isapnp: move definitions to mod_devicetable.h so file2alias can reach them.
-
由 Linus Torvalds 提交于
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86: (32 commits) Move N014, N051 and CR620 dmi information to load scm dmi table drivers/platform/x86/eeepc-wmi.c: fix build warning X86 platfrom wmi: Add debug facility to dump WMI data in a readable way X86 platform wmi: Also log GUID string when an event happens and debug is set X86 platform wmi: Introduce debug param to log all WMI events Clean up all objects used by scm model when driver initial fail or exit msi-laptop: fix up some coding style issues found by checkpatch msi-laptop: Add i8042 filter to sync sw state with BIOS when function key pressed msi-laptop: Set rfkill init state when msi-laptop intiial msi-laptop: Add MSI CR620 notebook dmi information to scm models table msi-laptop: Add N014 N051 dmi information to scm models table drivers/platform/x86: Use kmemdup drivers/platform/x86: Use kzalloc drivers/platform/x86: Clarify the MRST IPC driver description slightly eeepc-wmi: depends on BACKLIGHT_CLASS_DEVICE IPC driver for Intel Mobile Internet Device (MID) platforms classmate-laptop: Add RFKILL support. thinkpad-acpi: document backlight level writeback at driver init thinkpad-acpi: clean up ACPI handles handling thinkpad-acpi: don't depend on led_path for led firmware type (v2) ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx由 Linus Torvalds 提交于
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: DMAENGINE: extend the control command to include an arg async_tx: trim dma_async_tx_descriptor in 'no channel switch' case DMAENGINE: DMA40 fix for allocation of logical channel 0 DMAENGINE: DMA40 support paused channel status dmaengine: mpc512x: Use resource_size DMA ENGINE: Do not reset 'private' of channel ioat: Remove duplicated devm_kzalloc() calls for ioatdma_device ioat3: disable cacheline-unaligned transfers for raid operations ioat2,3: convert to producer/consumer locking ioat: convert to circ_buf DMAENGINE: Support for ST-Ericssons DMA40 block v3 async_tx: use of kzalloc/kfree requires the include of slab.h dmaengine: provide helper for setting txstate DMAENGINE: generic channel status v2 DMAENGINE: generic slave control v2 dma: timb-dma: Update comment and fix compiler warning dma: Add timb-dma DMAENGINE: COH 901 318 fix bytesleft DMAENGINE: COH 901 318 rename confusing vars
-
git://neil.brown.name/md由 Linus Torvalds 提交于
* 'for-linus' of git://neil.brown.name/md: (45 commits) md: don't insist on valid event count for spare devices. md: simplify updating of event count to sometimes avoid updating spares. md/raid6: Fix raid-6 read-error correction in degraded state md: restore ability of spare drives to spin down. md: Fix read balancing in RAID1 and RAID10 on drives > 2TB md/linear: standardise all printk messages md/raid0: tidy up printk messages. md/raid10: tidy up printk messages. md/raid1: improve printk messages md/raid5: improve consistency of error messages. md: remove EXPERIMENTAL designation from RAID10 md: allow integers to be passed to md/level md: notify mdstat waiters of level change md/raid4: permit raid0 takeover md/raid1: delay reads that could overtake behind-writes. md/raid1: fix confusing 'redirect sector' message. md: don't unregister the thread in mddev_suspend md: factor out init code for an mddev md: pass mddev to make_request functions rather than request_queue md: call md_stop_writes from md_stop ...
-
由 NeilBrown 提交于
Conflicts: drivers/md/md.c - Resolved conflict in md_update_sb - Added extra 'NULL' arg to new instance of sysfs_get_dirent. Signed-off-by: NNeilBrown <neilb@suse.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (577 commits) Staging: ramzswap: Handler for swap slot free callback swap: Add swap slot free callback to block_device_operations swap: Add flag to identify block swap devices Staging: vt6655: use ETH_FRAME_LEN macro instead of custom one Staging: vt6655: use ETH_DATA_LEN macro instead of custom one Staging: vt6655: use ETH_FCS_LEN macro instead of custom one Staging: vt6656: use ETH_HLEN macro instead of custom one Staging: comedi: quatech_daqp_cs.c Replace eos semaphore with a completion. Staging: dt3155v4l: remove private memory allocator Staging: crystalhd: Remove typedefs from driver Staging: winbond: Fix for pointer name format issue in mds.c Staging: vt6656: removed custom UCHAR/USHORT/UINT/ULONG/ULONGLONG typedefs Staging: vt6656: removed custom CHAR/SHORT/INT/LONG typedefs Staging: comedi: Altered the way printk is used in 8255.c staging: iio: adis16350 and similar IMU driver Staging: iio: max1363 Fix two bugs in single_channel_from_ring Staging: iio: adis16220 extract bin_attribute structures from state Staging: iio: adis16220 vibration sensor driver Staging: comedi: Kconfig dependancy fixes Staging: comedi: fix up build error from last Kconfig changes ...
-
git://git.kernel.dk/linux-2.6-block由 Linus Torvalds 提交于
* 'for-2.6.35' of git://git.kernel.dk/linux-2.6-block: (86 commits) pipe: set lower and upper limit on max pages in the pipe page array pipe: add support for shrinking and growing pipes drbd: This is now equivalent to drbd release 8.3.8rc1 drbd: Do not free p_uuid early, this is done in the exit code of the receiver drbd: Null pointer deref fix to the large "multi bio rewrite" drbd: Fix: Do not detach, if a bio with a barrier fails drbd: Ensure to not trigger late-new-UUID creation multiple times drbd: Do not Oops when C_STANDALONE when uuid gets generated writeback: fix mixed up arguments to bdi_start_writeback() writeback: fix problem with !CONFIG_BLOCK compilation block: improve automatic native capacity unlocking block: use struct parsed_partitions *state universally in partition check code block,ide: simplify bdops->set_capacity() to ->unlock_native_capacity() block: restart partition scan after resizing a device buffer: make invalidate_bdev() drain all percpu LRU add caches block: remove all rcu head initializations writeback: fixups for !dirty_writeback_centisecs writeback: bdi_writeback_task() must set task state before calling schedule() writeback: ensure that WB_SYNC_NONE writeback with sb pinned is sync drivers/block/drbd: Use kzalloc ...
-
git://ftp.linux-mips.org/pub/scm/upstream-linus由 Linus Torvalds 提交于
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (25 commits) MIPS: Use GCC __builtin_prefetch() to implement prefetch(). MIPS: Octeon: Serial port fixes for OCTEON simulator. MIPS: Octeon: Get rid of early serial. MIPS: AR7: prevent race between clock initialization and devices registration MIPS: AR7: use ar7_has_high_vlynq() to determine watchdog base address MIPS: BCM63xx: Avoid namespace clash on GPIO_DIR_{IN,OUT} MIPS: MTX-1: Update defconfig MIPS: BCM47xx: Update defconfig MIPS: RB532: Update defconfig MIPS: AR7: Update defconfig RTC: rtc-cmos: Fix binary mode support MIPS: Oprofile: Loongson: Cleanup the comments MIPS: Oprofile: Loongson: Cleanup of the macros MIPS: Oprofile: Loongson: Remove unused variable from loongson2_cpu_setup() MIPS: Oprofile: Loongson: Remove useless parentheses MIPS: Oprofile: Loongson: Unify macro for setting events MIPS: nofpu and nodsp only affect CPU0 MIPS: Clean up tables for bootmem allocation MIPS: Coding style cleanups of access of FCSR rounding mode bits MIPS: Loongson 2F: Add gpio/gpioilb support ...
-
由 Randy Dunlap 提交于
Fix kernel-doc warnings, kernel-doc special characters, and typos in recent kernel/sysctl.c additions. Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: Amerigo Wang <amwang@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://gitorious.org/linux-omap-dss2/linux由 Linus Torvalds 提交于
* 'for-linus' of git://gitorious.org/linux-omap-dss2/linux: (23 commits) OMAP: DSS2: Fix omap_dss_probe() error path OMAP: DSS2: omap_dss_probe() conditional compilation cleanup board-omap3-beagle: add DSS2 support OMAP2: DSS: Add missing line for update bg color OMAP3630: DSS2: Updating MAX divider value OMAP: RX51: Update board defconfig OMAP: DSS2: Add ACX565AKM Panel Driver OMAP: RX51: Add Touch Controller in SPI board info OMAP: RX51: Add LCD Panel support OMAP: DSS2: TPO-TD03MTEA1: fix Kconfig dependency OMAP: LCD LS037V7DW01: Add Backlight driver support OMAP: DSS2: Taal: Fix DSI bus locking problem OMAP: DSS2: Taal: add mutex to protect panel data OMAP: DSS2: Make partial update width even OMAP: DSS2: Fix device disable when driver is not loaded OMAP: DSS2: VENC: don't call platform_enable/disable() twice OMAP: DSS2: check lock_fb_info() return value OMAP: DSS2: fix lock_fb_info() and omapfb_lock() locking order OMAP: DSS2: Use vdds_sdi regulator supply in SDI OMAP: DSS2: Remove redundant enable/disable calls from SDI ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (46 commits) random: simplify fips mode crypto: authenc - Fix cryptlen calculation crypto: talitos - add support for sha224 crypto: talitos - add hash algorithms crypto: talitos - second prepare step for adding ahash algorithms crypto: talitos - prepare for adding ahash algorithms crypto: n2 - Add Niagara2 crypto driver crypto: skcipher - Add ablkcipher_walk interfaces crypto: testmgr - Add testing for async hashing and update/final crypto: tcrypt - Add speed tests for async hashing crypto: scatterwalk - Fix scatterwalk_done() test crypto: hifn_795x - Rename ablkcipher_walk to hifn_cipher_walk padata: Use get_online_cpus/put_online_cpus in padata_free padata: Add some code comments padata: Flush the padata queues actively padata: Use a timer to handle remaining objects in the reorder queues crypto: shash - Remove usage of CRYPTO_MINALIGN crypto: mv_cesa - Use resource_size crypto: omap - OMAP macros corrected padata: Use get_online_cpus/put_online_cpus ... Fix up conflicts in arch/arm/mach-omap2/devices.c
-
由 Praveen Kalamegham 提交于
Removed check to prevent hotplug of display devices within pciehp. Originally this was thought to have been required within the PCI Hotplug specification for some legacy devices. However there is no such requirement in the most recent revision. The check prevents hotplug of not only display devices but also computational GPUs which require serviceability. Signed-off-by: NPraveen Kalamegham <praveen@nextio.com> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
由 Ira W. Snyder 提交于
Read the memory ranges behind the Broadcom CNB20LE host bridge out of the hardware. This allows PCI hotplugging to work, since we know which memory range to allocate PCI BAR's from. The x86 PCI code automatically prefers the ACPI _CRS information when it is available. In that case, this information is not used. Signed-off-by: NIra W. Snyder <iws@ovro.caltech.edu> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
由 Felix Radensky 提交于
At the moment only PCI-E briges can be flagged as hotplug, thus allowing manual resource preallocation via pci=hpmemsize=nnM and pci=hpiosize=nnM kernel parameters. Some PCI hotplug bridges, e.g. PLX 6254 can also benefit from this functionalily, as kernel fails to properly allocate their resources when hotplug device is added and PCI bus is rescanned. This patch adds header quirk for PLX 6254 that marks this bridge as hotplug. Other PCI bridges with similar problems can use it as well. Signed-off-by: NFelix Radensky <felix@embedded-sol.com> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
git://codeaurora.org/quic/kernel/dwalker/linux-msm由 Linus Torvalds 提交于
* 'msm-video' of git://codeaurora.org/quic/kernel/dwalker/linux-msm: drivers: video: msm: add include msm_mdp.h drivers: video: msm: default to no
-
git://codeaurora.org/quic/kernel/dwalker/linux-msm由 Linus Torvalds 提交于
* 'msm-mmc_sdcc' of git://codeaurora.org/quic/kernel/dwalker/linux-msm: drivers: mmc: msm_sdcc: Add EMBEDDED_SDIO support mmc: msm_sdcc: Fix issue where clocks could be disabled mid transaction mmc: msm_sdcc: Fix the dma exec function to use the proper delays mmc: msm_sdcc: Don't set host->curr.mrq until after we're sure the busclk timer won't fire mmc: msm_sdcc: Enable busclk idle timer for power savings mmc: msm_sdcc: Don't disable interrupts while suspending mmc: msm_sdcc: Fix issue where we might not end a sucessfull request mmc: msm_sdcc: Featurize busclock power save and disable it by default mmc: msm_sdcc: Fix bug where busclk expiry timer was not properly disabled mmc: msm_sdcc: Reduce command timeouts and improve reliability. mmc: msm_sdcc: Schedule clock disable after probe mmc: msm_sdcc: Wrap readl/writel calls with appropriate clk delays mmc: msm_sdcc: Driver clocking/irq improvements msm: Add 'execute' datamover callback mmc: msm_sdcc: Snoop SDIO_CCCR_ABORT register mmc: msm_sdcc: Clean up clock management and add a 10us delay after enabling clocks
-
由 David Daney 提交于
GCC's __builtin_prefetch() was introduced a long time ago, all supported GCC versions have it. Lets do what the big boys up in linux/prefetch.h do, except we use '1' as the third parameter to provoke 'PREF 0,...' and 'PREF 1,...' instead of other prefetch hints. This allows for better code generation. In theory the existing embedded asm could be optimized, but the compiler has these builtins, so there is really no point. Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1235/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 David Daney 提交于
For the simulator, fake a slow clock to get fast output. In prom_putchar we have to mask the value so the simulator doesn't ASSERT when printing non-ASCII characters. Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1255/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 David Daney 提交于
Get rid of early_serial_setup, we use CONFIG_EARLY_PRINTK instead. Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1254/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Florian Fainelli 提交于
ar7_regiser_devices needs ar7_clocks_init to have been called first, however clock.o is currently linked later due to its order in the Makefile, therefore ar7_clocks_init always gets called later than ar7_register_devices because both have the same initcall level. Fix this by moving ar7_register_devices to the right initcall level. Reported-by: NMichael J. Evans <mjevans1983@gmail.com> Signed-off-by: NFlorian Fainelli <florian@openwrt.org> To: linux-mips@linux-mips.org Cc: Ralf Baechle <ralf@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/1212/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Florian Fainelli 提交于
Instead of doing yet another switch/case on the chip_id, use existing inline function to set the watchdog base address. Signed-off-by: NFlorian Fainelli <florian@openwrt.org> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1211/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Florian Fainelli 提交于
This is too generic a name, so prefix it with BCM63XX_ to avoid potential namespace clashes when including <asm/gpio.h>. Signed-off-by: NFlorian Fainelli <ffainelli@freebox.fr> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1171/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Florian Fainelli 提交于
Updates the 4G Systems MTX-1 defconfig, and remove systems unavailable on this platform. Changes include: - built-in MTD char/block support - GPIO sysfs support - MTX-1 watchdog driver - I2C over GPIO driver as a module - SquashFS support Signed-off-by: NFlorian Fainelli <florian@openwrt.org> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1168/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Florian Fainelli 提交于
Update Broadcom BCM47xx defconfig with: - tiny RCU - BCM47xx watchdog driver - b43/b43legacy wireless as modules - SSB Gigabit Ethernet driver - disabled IRDA 6igned-off-by: Florian Fainelli <florian@openwrt.org> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1167/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Florian Fainelli 提交于
This updates the Mikrotik RB532 defconfig with: - tiny RCU - RB532 input buttons driver - RB532 LED driver - RC32434 watchdog driver - GPIO sysfs support - Wireless support - SquashFS support - more LED triggers Signed-off-by: NFlorian Fainelli <florian@openwrt.org> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1166/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Florian Fainelli 提交于
Update Texas Instruments AR7 defconfig with: - tiny RCU - LEDs GPIO - disable SSB - enable zboot support - enable GPIO sysfs support Signed-off-by: NFlorian Fainelli <florian@openwrt.org> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1165/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Arnaud Patard 提交于
As a follow-up to the thread about RTC support for some Loongson 2E/2F boards, this patch tries to address the "REVISIT"/"FIXME" comments about rtc binary mode handling and allow rtc to work with rtc in binary mode. I've also raised the message about 24-h mode not supported to warning otherwise, one may end up with no rtc without any message in the kernel log. Signed-off-by: NArnaud Patard <apatard@mandriva.com> To: linux-mips@linux-mips.org To: rtc-linux@googlegroups.com Cc: david-b@pacbell.net Cc: a.zummo@towertech.it Cc: akpm@linux-foundation.org Patchwork: http://patchwork.linux-mips.org/patch/1158/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Wu Zhangjin 提交于
Removes some out-of-date comments and empty lines. Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1204/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Wu Zhangjin 提交于
The _EXL, _KERNEL etc. bits are in the performance control register so use _PERFCTRL prefix instead of _PERFCNT. While at it make the macro more readable, use _ENABLE instead of _INT_EN suffix to describe the interrupt enable bit. Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1203/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Wu Zhangjin 提交于
Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1202/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Wu Zhangjin 提交于
Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1201/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Wu Zhangjin 提交于
Unified macro for counter0 and counter1 to set the event in the control register. This will be needed by Perf. Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1200/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Kevin Cernekee 提交于
The "nofpu" and "nodsp" kernel command line options currently do not affect CPUs that are brought online later in the boot process or hotplugged at runtime. It is desirable to apply the nofpu/nodsp options to all CPUs in the system, so that surprising results are not seen when a process migrates from one CPU to another. [Ralf: Moved definitions of mips_fpu_disabled, fpu_disable, mips_dsp_disabled and dsp_disable from setup.c to cpu-probe.c to allow making mips_fpu_disabled and mips_dsp_disabled static.] Signed-off-by: NKevin Cernekee <cernekee@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: http://patchwork.linux-mips.org/patch/1169/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 David VomLehn 提交于
Modifications to the boot memory allocation structures to make them easier to read and maintain. Note that this will not pass checkpatch because it wants a structure element initializer to be enclosed in a do {...} while(...), which is obvious nonsensical. Signed-off-by: NDavid VomLehn <dvomlehn@cisco.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1207/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Shane McDonald 提交于
Replaces references to the magic number 0x3 with constants and macros indicating the real purpose of those bits. They are the rounding mode bits of the FCSR register. Signed-off-by: NShane McDonald <mcdonald.shane@gmail.com> To: anemo@mba.ocn.ne.jp To: kevink@paralogos.com To: linux-mips@linux-mips.org To: sshtylyov@mvista.com Patchwork: http://patchwork.linux-mips.org/patch/1206/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Arnaud Patard 提交于
Signed-off-by: NArnaud Patard <apatard@mandriva.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1163/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-