- 04 5月, 2016 2 次提交
-
-
由 Jon Paul Maloy 提交于
During neighbor discovery, nodes advertise their capabilities as a bit map in a dedicated 16-bit field in the discovery message header. This bit map has so far only be stored in the node structure on the peer nodes, but we now see the need to keep a copy even in the socket structure. This commit adds this functionality. Acked-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Paul Maloy 提交于
In the refactoring commit d570d864 ("tipc: enqueue arrived buffers in socket in separate function") we did by accident replace the test if (sk->sk_backlog.len == 0) atomic_set(&tsk->dupl_rcvcnt, 0); with if (sk->sk_backlog.len) atomic_set(&tsk->dupl_rcvcnt, 0); This effectively disables the compensation we have for the double receive buffer accounting that occurs temporarily when buffers are moved from the backlog to the socket receive queue. Until now, this has gone unnoticed because of the large receive buffer limits we are applying, but becomes indispensable when we reduce this buffer limit later in this series. We now fix this by inverting the mentioned condition. Acked-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 3月, 2016 1 次提交
-
-
由 Richard Alpe 提交于
Make the c files less cluttered and enable netlink attributes to be shared between files. Signed-off-by: NRichard Alpe <richard.alpe@ericsson.com> Reviewed-by: NJon Maloy <jon.maloy@ericsson.com> Acked-by: NParthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 3月, 2016 1 次提交
-
-
由 Parthasarathy Bhuvaragan 提交于
reverts commit 94153e36 ("tipc: use existing sk_write_queue for outgoing packet chain") In Commit 94153e36, we assume that we fill & empty the socket's sk_write_queue within the same lock_sock() session. This is not true if the link is congested. During congestion, the socket lock is released while we wait for the congestion to cease. This implementation causes a nullptr exception, if the user space program has several threads accessing the same socket descriptor. Consider two threads of the same program performing the following: Thread1 Thread2 -------------------- ---------------------- Enter tipc_sendmsg() Enter tipc_sendmsg() lock_sock() lock_sock() Enter tipc_link_xmit(), ret=ELINKCONG spin on socket lock.. sk_wait_event() : release_sock() grab socket lock : Enter tipc_link_xmit(), ret=0 : release_sock() Wakeup after congestion lock_sock() skb = skb_peek(pktchain); !! TIPC_SKB_CB(skb)->wakeup_pending = tsk->link_cong; In this case, the second thread transmits the buffers belonging to both thread1 and thread2 successfully. When the first thread wakeup after the congestion it assumes that the pktchain is intact and operates on the skb's in it, which leads to the following exception: [2102.439969] BUG: unable to handle kernel NULL pointer dereference at 00000000000000d0 [2102.440074] IP: [<ffffffffa005f330>] __tipc_link_xmit+0x2b0/0x4d0 [tipc] [2102.440074] PGD 3fa3f067 PUD 3fa6b067 PMD 0 [2102.440074] Oops: 0000 [#1] SMP [2102.440074] CPU: 2 PID: 244 Comm: sender Not tainted 3.12.28 #1 [2102.440074] RIP: 0010:[<ffffffffa005f330>] [<ffffffffa005f330>] __tipc_link_xmit+0x2b0/0x4d0 [tipc] [...] [2102.440074] Call Trace: [2102.440074] [<ffffffff8163f0b9>] ? schedule+0x29/0x70 [2102.440074] [<ffffffffa006a756>] ? tipc_node_unlock+0x46/0x170 [tipc] [2102.440074] [<ffffffffa005f761>] tipc_link_xmit+0x51/0xf0 [tipc] [2102.440074] [<ffffffffa006d8ae>] tipc_send_stream+0x11e/0x4f0 [tipc] [2102.440074] [<ffffffff8106b150>] ? __wake_up_sync+0x20/0x20 [2102.440074] [<ffffffffa006dc9c>] tipc_send_packet+0x1c/0x20 [tipc] [2102.440074] [<ffffffff81502478>] sock_sendmsg+0xa8/0xd0 [2102.440074] [<ffffffff81507895>] ? release_sock+0x145/0x170 [2102.440074] [<ffffffff815030d8>] ___sys_sendmsg+0x3d8/0x3e0 [2102.440074] [<ffffffff816426ae>] ? _raw_spin_unlock+0xe/0x10 [2102.440074] [<ffffffff81115c2a>] ? handle_mm_fault+0x6ca/0x9d0 [2102.440074] [<ffffffff8107dd65>] ? set_next_entity+0x85/0xa0 [2102.440074] [<ffffffff816426de>] ? _raw_spin_unlock_irq+0xe/0x20 [2102.440074] [<ffffffff8107463c>] ? finish_task_switch+0x5c/0xc0 [2102.440074] [<ffffffff8163ea8c>] ? __schedule+0x34c/0x950 [2102.440074] [<ffffffff81504e12>] __sys_sendmsg+0x42/0x80 [2102.440074] [<ffffffff81504e62>] SyS_sendmsg+0x12/0x20 [2102.440074] [<ffffffff8164aed2>] system_call_fastpath+0x16/0x1b In this commit, we maintain the skb list always in the stack. Signed-off-by: NParthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Acked-by: NYing Xue <ying.xue@windriver.com> Acked-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 12月, 2015 1 次提交
-
-
由 Herbert Xu 提交于
The memory barrier in the helper wq_has_sleeper is needed by just about every user of waitqueue_active. This patch generalises it by making it take a wait_queue_head_t directly. The existing helper is renamed to skwq_has_sleeper. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 11月, 2015 1 次提交
-
-
由 Ying Xue 提交于
Even if we drain receive queue thoroughly in tipc_release() after tipc socket is removed from rhashtable, it is possible that some packets are in flight because some CPU runs receiver and did rhashtable lookup before we removed socket. They will achieve receive queue, but nobody delete them at all. To avoid this leak, we register a private socket destructor to purge receive queue, meaning releasing packets pending on receive queue will be delayed until the last reference of tipc socket will be released. Signed-off-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 10月, 2015 2 次提交
-
-
由 Jon Paul Maloy 提交于
Until now, we have only been supporting a fix MTU size of 1500 bytes for all broadcast media, irrespective of their actual capability. We now make the broadcast MTU adaptable to the carrying media, i.e., we use the smallest MTU supported by any of the interfaces attached to TIPC. Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Reviewed-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Paul Maloy 提交于
Currently, a number of structure and function definitions related to the broadcast functionality are unnecessarily exposed in the file bcast.h. This obscures the fact that the external interface towards the broadcast link in fact is very narrow, and causes unnecessary recompilations of other files when anything changes in those definitions. In this commit, we move as many of those definitions as is currently possible to the file bcast.c. We also rename the structure 'tipc_bclink' to 'tipc_bc_base', both since the name does not correctly describe the contents of this struct, and will do so even less in the future, and because we want to use the term 'link' more appropriately in the functionality introduced later in this series. Finally, we rename a couple of functions, such as tipc_bclink_xmit() and others that will be kept in the future, to include the term 'bcast' instead. There are no functional changes in this commit. Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Reviewed-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 7月, 2015 3 次提交
-
-
由 Jon Paul Maloy 提交于
When a message is received in a socket, one of the call chains tipc_sk_rcv()->tipc_sk_enqueue()->filter_rcv()(->tipc_sk_proto_rcv()) or tipc_sk_backlog_rcv()->filter_rcv()(->tipc_sk_proto_rcv()) are followed. At each of these levels we may encounter situations where the message may need to be rejected, or a new message produced for transfer back to the sender. Despite recent improvements, the current code for doing this is perceived as awkward and hard to follow. Leveraging the two previous commits in this series, we now introduce a more uniform handling of such situations. We let each of the functions in the chain itself produce/reverse the message to be returned to the sender, but also perform the actual forwarding. This simplifies the necessary logics within each function. Reviewed-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Paul Maloy 提交于
Currently, we use the code sequence if (msg_reverse()) tipc_link_xmit_skb() at numerous locations in socket.c. The preparation of arguments for these calls, as well as the sequence itself, makes the code unecessarily complex. In this commit, we introduce a new function, tipc_sk_respond(), that performs this call combination. We also replace some, but not yet all, of these explicit call sequences with calls to the new function. Notably, we let the function tipc_sk_proto_rcv() use the new function to directly send out PROBE_REPLY messages, instead of deferring this to the calling tipc_sk_rcv() function, as we do now. Reviewed-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Paul Maloy 提交于
The shortest TIPC message header, for cluster local CONNECTED messages, is 24 bytes long. With this format, the fields "dest_node" and "orig_node" are optimized away, since they in reality are redundant in this particular case. However, the absence of these fields leads to code inconsistencies that are difficult to handle in some cases, especially when we need to reverse or reject messages at the socket layer. In this commit, we concentrate the handling of the absent fields to one place, by letting the function tipc_msg_reverse() reallocate the buffer and expand the header to 32 bytes when necessary. This means that the socket code now can assume that the two previously absent fields are present in the header when a message needs to be rejected. This opens up for some further simplifications of the socket code. Reviewed-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 7月, 2015 2 次提交
-
-
由 Jon Paul Maloy 提交于
Currently, message sending is performed through a deep call chain, where the node spinlock is grabbed and held during a significant part of the transmission time. This is clearly detrimental to overall throughput performance; it would be better if we could send the message after the spinlock has been released. In this commit, we do instead let the call revert on the stack after the buffer chain has been added to the transmission queue, whereafter clones of the buffers are transmitted to the device layer outside the spinlock scope. As a further step in our effort to separate the roles of the node and link entities we also move the function tipc_link_xmit() to node.c, and rename it to tipc_node_xmit(). Reviewed-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Paul Maloy 提交于
When the function tipc_link_xmit() is given a buffer list for transmission, it currently consumes the list both when transmission is successful and when it fails, except for the special case when it encounters link congestion. This behavior is inconsistent, and needs to be corrected if we want to avoid problems in later commits in this series. In this commit, we change this to let the function consume the list only when transmission is successful, and leave the list with the sender in all other cases. We also modifiy the socket code so that it adapts to this change, i.e., purges the list when a non-congestion error code is returned. Reviewed-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 7月, 2015 1 次提交
-
-
由 Stephen Smalley 提交于
Calling connect() with an AF_TIPC socket would trigger a series of error messages from SELinux along the lines of: SELinux: Invalid class 0 type=AVC msg=audit(1434126658.487:34500): avc: denied { <unprintable> } for pid=292 comm="kworker/u16:5" scontext=system_u:system_r:kernel_t:s0 tcontext=system_u:object_r:unlabeled_t:s0 tclass=<unprintable> permissive=0 This was due to a failure to initialize the security state of the new connection sock by the tipc code, leaving it with junk in the security class field and an unlabeled secid. Add a call to security_sk_clone() to inherit the security state from the parent socket. Reported-by: NTim Shearer <tim.shearer@overturenetworks.com> Signed-off-by: NStephen Smalley <sds@tycho.nsa.gov> Acked-by: NPaul Moore <paul@paul-moore.com> Acked-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 6月, 2015 1 次提交
-
-
由 Erik Hugne 提交于
If the TIPC connection timer expires in a probing state, a self abort message is supposed to be generated and delivered to the local socket. This is currently broken, and the abort message is actually sent out to the peer node with invalid addressing information. This will cause the link to enter a constant retransmission state and eventually reset. We fix this by removing the self-abort message creation and tear down connection immediately instead. Signed-off-by: NErik Hugne <erik.hugne@ericsson.com> Reviewed-by: NYing Xue <ying.xue@windriver.com> Reviewed-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 31 5月, 2015 1 次提交
-
-
由 Ying Xue 提交于
As sock refcnt is taken when sock timer is started in sk_reset_timer(), the sock refcnt should be put when sock timer to be deleted is in pending state no matter what "probing_state" value of tipc sock is. Reviewed-by: NErik Hugne <erik.hugne@ericsson.com> Reviewed-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 5月, 2015 1 次提交
-
-
由 Jon Paul Maloy 提交于
When we try to add new inline functions in the code, we sometimes run into circular include dependencies. The main problem is that the file core.h, which really should be at the root of the dependency chain, instead is a leaf. I.e., core.h includes a number of header files that themselves should be allowed to include core.h. In reality this is unnecessary, because core.h does not need to know the full signature of any of the structs it refers to, only their type declaration. In this commit, we remove all dependencies from core.h towards any other tipc header file. As a consequence of this change, we can now move the function tipc_own_addr(net) from addr.c to addr.h, and make it inline. There are no functional changes in this commit. Reviewed-by: NErik Hugne <erik.hugne@ericsson.com> Reviewed-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 5月, 2015 1 次提交
-
-
由 Eric W. Biederman 提交于
In preparation for changing how struct net is refcounted on kernel sockets pass the knowledge that we are creating a kernel socket from sock_create_kern through to sk_alloc. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 4月, 2015 1 次提交
-
-
由 Erik Hugne 提交于
In the function tipc_sk_rcv(), the stack variable 'err' is only initialized to TIPC_ERR_NO_PORT for the first iteration over the link input queue. If a chain of messages are received from a link, failure to lookup the socket for any but the first message will cause the message to bounce back out on a random link. We fix this by properly initializing err. Signed-off-by: NErik Hugne <erik.hugne@ericsson.com> Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 3月, 2015 2 次提交
-
-
由 Thomas Graf 提交于
Introduce a new bool automatic_shrinking to require the user to explicitly opt-in to automatic shrinking of tables. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sasha Levin 提交于
Commit f2f8036e ("tipc: add support for connect() on dgram/rdm sockets") hasn't validated user input length for the sockaddr structure which allows a user to overwrite kernel memory with arbitrary input. Fixes: f2f8036e ("tipc: add support for connect() on dgram/rdm sockets") Signed-off-by: NSasha Levin <sasha.levin@oracle.com> Acked-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 3月, 2015 1 次提交
-
-
由 Herbert Xu 提交于
This patch removes the explicit jhash value for the hashfn parameter of rhashtable. The default is now jhash so removing the setting makes no difference apart from making one less copy of jhash in the kernel. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Acked-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 3月, 2015 1 次提交
-
-
由 Herbert Xu 提交于
This patch converts tipc to the inlined rhashtable interface. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 3月, 2015 2 次提交
-
-
由 Erik Hugne 提交于
Following the example of ip4_datagram_connect, we store the address in the socket structure for dgram/rdm sockets and use that as the default destination for subsequent send() calls. It is allowed to connect to any address types, and the behaviour of send() will be the same as a normal sendto() with this address provided. Binding to an AF_UNSPEC address clears the association. Signed-off-by: NErik Hugne <erik.hugne@ericsson.com> Reviewed-by: NYing Xue <ying.xue@windriver.com> Reviewed-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Erik Hugne 提交于
tipc_node_remove_conn may be called twice if shutdown() is called on a socket that have messages in the receive queue. Calling this function twice does no harm, but is unnecessary and we remove the redundant call. Signed-off-by: NErik Hugne <erik.hugne@ericsson.com> Acked-by: NYing Xue <ying.xue@windriver.com> Acked-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 3月, 2015 1 次提交
-
-
由 Herbert Xu 提交于
This patch converts tipc to use rhashtable max/min_size instead of the obsolete max/min_shift. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 3月, 2015 1 次提交
-
-
由 Ying Xue 提交于
When the TIPC module is loaded, we launch a topology server in kernel space, which in its turn is creating TIPC sockets for communication with topology server users. Because both the socket's creator and provider reside in the same module, it is necessary that the TIPC module's reference count remains zero after the server is started and the socket created; otherwise it becomes impossible to perform "rmmod" even on an idle module. Currently, we achieve this by defining a separate "tipc_proto_kern" protocol struct, that is used only for kernel space socket allocations. This structure has the "owner" field set to NULL, which restricts the module reference count from being be bumped when sk_alloc() for local sockets is called. Furthermore, we have defined three kernel-specific functions, tipc_sock_create_local(), tipc_sock_release_local() and tipc_sock_accept_local(), to avoid the module counter being modified when module local sockets are created or deleted. This has worked well until we introduced name space support. However, after name space support was introduced, we have observed that a reference count leak occurs, because the netns counter is not decremented in tipc_sock_delete_local(). This commit remedies this problem. But instead of just modifying tipc_sock_delete_local(), we eliminate the whole parallel socket handling infrastructure, and start using the regular sk_create_kern(), kernel_accept() and sk_release_kernel() calls. Since those functions manipulate the module counter, we must now compensate for that by explicitly decrementing the counter after module local sockets are created, and increment it just before calling sk_release_kernel(). Fixes: a62fbcce ("tipc: make subscriber server support net namespace") Signed-off-by: NYing Xue <ying.xue@windriver.com> Reviewed-by: NJon Maloy <jon.maloy@ericson.com> Reviewed-by: NErik Hugne <erik.hugne@ericsson.com> Reported-by: NCong Wang <cwang@twopensource.com> Tested-by: NErik Hugne <erik.hugne@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 3月, 2015 1 次提交
-
-
由 Erik Hugne 提交于
Commit 9bbb4ecc ("tipc: standardize recvmsg routine") changed the sleep/wakeup behaviour for sockets entering recv() or accept(). In this process the order of reporting -EAGAIN/-EINTR was reversed. This caused problems with wrong errno being reported back if the timeout expires. The same problem happens if the socket is nonblocking and recv()/accept() is called when the process have pending signals. If there is no pending data read or connections to accept, -EINTR will be returned instead of -EAGAIN. Signed-off-by: NErik Hugne <erik.hugne@ericsson.com> Reviewed-by: NYing Xue <ying.xue@windriver.com> Reviewed-by: NJon Maloy <jon.maloy@ericsson.com> Reported-by László Benedek <laszlo.benedek@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 3月, 2015 2 次提交
-
-
由 Ying Xue 提交于
After TIPC doesn't depend on iocb argument in its internal implementations of sendmsg() and recvmsg() hooks defined in proto structure, no any user is using iocb argument in them at all now. Then we can drop the redundant iocb argument completely from kinds of implementations of both sendmsg() and recvmsg() in the entire networking stack. Cc: Christoph Hellwig <hch@lst.de> Suggested-by: NAl Viro <viro@ZenIV.linux.org.uk> Signed-off-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ying Xue 提交于
Currently the iocb argument is used to idenfiy whether or not socket lock is hold before tipc_sendmsg()/tipc_send_stream() is called. But this usage prevents iocb argument from being dropped through sendmsg() at socket common layer. Therefore, in the commit we introduce two new functions called __tipc_sendmsg() and __tipc_send_stream(). When they are invoked, it assumes that their callers have taken socket lock, thereby avoiding the weird usage of iocb argument. Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Reviewed-by: NErik Hugne <erik.hugne@ericsson.com> Reviewed-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 2月, 2015 1 次提交
-
-
由 Daniel Borkmann 提交于
Currently, all real users of rhashtable default their grow and shrink decision functions to rht_grow_above_75() and rht_shrink_below_30(), so that there's currently no need to have this explicitly selectable. It can/should be generic and private inside rhashtable until a real use case pops up. Since we can make this private, we'll save us this additional indirection layer and can improve insertion/deletion time as well. Reference: http://patchwork.ozlabs.org/patch/443040/Suggested-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 2月, 2015 3 次提交
-
-
由 Richard Alpe 提交于
Add TIPC_CMD_NOOP to compat layer and remove the old framework. All legacy nl commands are now converted to the compat layer in netlink_compat.c. Signed-off-by: NRichard Alpe <richard.alpe@ericsson.com> Reviewed-by: NErik Hugne <erik.hugne@ericsson.com> Reviewed-by: NYing Xue <ying.xue@windriver.com> Reviewed-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Richard Alpe 提交于
Convert socket (port) listing to compat dumpit call. If a socket (port) has publications a second dumpit call is issued to collect them and format then into the legacy buffer before continuing to process the sockets (ports). Command converted in this patch: TIPC_CMD_SHOW_PORTS Signed-off-by: NRichard Alpe <richard.alpe@ericsson.com> Reviewed-by: NErik Hugne <erik.hugne@ericsson.com> Reviewed-by: NYing Xue <ying.xue@windriver.com> Reviewed-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Richard Alpe 提交于
The new netlink API is no longer "v2" but rather the standard API and the legacy API is now "nl compat". We split them into separate start/stop and put them in different files in order to further distinguish them. Signed-off-by: NRichard Alpe <richard.alpe@ericsson.com> Reviewed-by: NErik Hugne <erik.hugne@ericsson.com> Reviewed-by: NYing Xue <ying.xue@windriver.com> Reviewed-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 2月, 2015 1 次提交
-
-
由 Jon Paul Maloy 提交于
In commit c637c103 ("tipc: resolve race problem at unicast message reception") we introduced a time limit for how long the function tipc_sk_eneque() would be allowed to execute its loop. Unfortunately, the test for when this limit is passed was put in the wrong place, resulting in a lost message when the test is true. We fix this by moving the test to before we dequeue the next buffer from the input queue. Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 2月, 2015 5 次提交
-
-
由 Jon Paul Maloy 提交于
In a previous commit in this series we resolved a race problem during unicast message reception. Here, we resolve the same problem at multicast reception. We apply the same technique: an input queue serializing the delivery of arriving buffers. The main difference is that here we do it in two steps. First, the broadcast link feeds arriving buffers into the tail of an arrival queue, which head is consumed at the socket level, and where destination lookup is performed. Second, if the lookup is successful, the resulting buffer clones are fed into a second queue, the input queue. This queue is consumed at reception in the socket just like in the unicast case. Both queues are protected by the same lock, -the one of the input queue. Reviewed-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Paul Maloy 提交于
The structure 'tipc_port_list' is used to collect port numbers representing multicast destination socket on a receiving node. The list is not based on a standard linked list, and is in reality optimized for the uncommon case that there are more than one multicast destinations per node. This makes the list handling unecessarily complex, and as a consequence, even the socket multicast reception becomes more complex. In this commit, we replace 'tipc_port_list' with a new 'struct tipc_plist', which is based on a standard list. We give the new list stack (push/pop) semantics, someting that simplifies the implementation of the function tipc_sk_mcast_rcv(). Reviewed-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Paul Maloy 提交于
TIPC handles message cardinality and sequencing at the link layer, before passing messages upwards to the destination sockets. During the upcall from link to socket no locks are held. It is therefore possible, and we see it happen occasionally, that messages arriving in different threads and delivered in sequence still bypass each other before they reach the destination socket. This must not happen, since it violates the sequentiality guarantee. We solve this by adding a new input buffer queue to the link structure. Arriving messages are added safely to the tail of that queue by the link, while the head of the queue is consumed, also safely, by the receiving socket. Sequentiality is secured per socket by only allowing buffers to be dequeued inside the socket lock. Since there may be multiple simultaneous readers of the queue, we use a 'filter' parameter to reduce the risk that they peek the same buffer from the queue, hence also reducing the risk of contention on the receiving socket locks. This solves the sequentiality problem, and seems to cause no measurable performance degradation. A nice side effect of this change is that lock handling in the functions tipc_rcv() and tipc_bcast_rcv() now becomes uniform, something that will enable future simplifications of those functions. Reviewed-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Paul Maloy 提交于
The list for outgoing traffic buffers from a socket is currently allocated on the stack. This forces us to initialize the queue for each sent message, something costing extra CPU cycles in the most critical data path. Later in this series we will introduce a new safe input buffer queue, something that would force us to initialize even the spinlock of the outgoing queue. A closer analysis reveals that the queue always is filled and emptied within the same lock_sock() session. It is therefore safe to use a queue aggregated in the socket itself for this purpose. Since there already exists a queue for this in struct sock, sk_write_queue, we introduce use of that queue in this commit. Reviewed-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Paul Maloy 提交于
The function tipc_msg_eval() is in reality doing two related, but different tasks. First it tries to find a new destination for named messages, in case there was no first lookup, or if the first lookup failed. Second, it does what its name suggests, evaluating the validity of the message and its destination, and returning an appropriate error code depending on the result. This is confusing, and in this commit we choose to break it up into two functions. A new function, tipc_msg_lookup_dest(), first attempts to find a new destination, if the message is of the right type. If this lookup fails, or if the message should not be subject to a second lookup, the already existing tipc_msg_reverse() is called. This function performs prepares the message for rejection, if applicable. Reviewed-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-